Capturing HDV 1080i50 with Sony HVR-Z1U

Long winded question... hope someone can offer some insight.
The answer to this may have been posted earlier, but sifting through the topics, I couldn't find any relating. If someone could be so kind to link me to any related topics, that would be helpful.
I'm editing a project in Final Cut Pro 5.0.4 that is a mix of HDV and DV, but will be finishing the final product in HDV. I've edited the original project in regular DV, but am batch capturing in the HDV footage according my XML.
But I can't seem to connect the camera.
Easy Setup: HDV - 1080i50 gives me an error "Unable to locate the following external devices: HDV (1440 x 1080) 2 fps)"
Going into Audio/Visual Settings and setting Capture settings to HDV and Device control preset to HDV Firewire gives me an error "Unable to initialize capture device and device control" (or for any device control preset with the HDV Capture setting for that matter)
Any device control preset with "HDV - Apple intermediate codec" will give me an error with "Unable to initialize HDV deck. Please make sure a deck is connected and try again".
Camera: In/Out VCR mode is set to Auto, i.Link Converter is set to "Off", A/V->DV Out is set to on.
Camera is on and plugged in. I've tried plugging the firewire into different ports and have also tried various firewire cables. Sometimes the device is controllable, but all it does is play the tape, never gets around to capturing anything.
.... sigh....
Thanks in advance,
_tess
Power PC G5 (iMac) Mac OS X (10.4.4)

AIC is not going to work for recapture, AIC doesn't use the original timecode off the master tape. Make sure you setup HDV 50i and before connecting the firewire cables go into the camera vtr mode then menu, then rec in out and set the ilink convert to off for HDV. the Camera will show HDV lights. Then connect to the computer and open log and capture.
Good Luck
Z1&V1user

Similar Messages

Unable to capture Canon HDV footage with Sony v1u camera

I'm trying to capture hdv footage filmed with a canon video camera with my sony v1u. My sony footage captures as it should, but the canon footage, although playing fine on the sony camera, will not capture to cs4. Any suggestions?

Check all camera settings and make sure they match the original filming mode on the other camera... and veryify your PPro settings match
If that doesn't work, try http://strony.aster.pl/paviko/hdvsplit.htm

Trouble capturing HDV footage from Sony Z5U in FCE4 - any ideas?

I've shot about half an hour of HDV footage with the Sony Z5U. Have the computer at home connected to my Mac with a firewire. Tried with both firewires that I own. I've used a similar camera before to capture footage recently with no problems.
Gone through the Easy Setup in FCE4 and changed it to HD, HDV1080i60. In the camera, the VCR mode is set for HDV, the Video Out for Component says "1080i/480i", the down convert and DV wide convert are for letter box.
Any ideas on what the problem is? Do I just have 2 bad Firewire cables? or a bad port on my computer/camera?

Do you want to downconvert, or do you want to capture HD? Switch off downconvert. Switch off iLink.

Cannot capture HDV through my SONY Z1P camera

Hi all,
My system profiler can find my camera connected via firewire. Cannot see in my setting 1080i50i, only 1080i60i as a capture setting. I can get the camera to connect and read timecode but no vision until i downgrade in camera to convert output to DV. How do i go about capturing HDV on this model camera, many thanks.

i'm guessing you're just missing the setup, not the codec
open the Final Cut Pro menu > Audio/Video Settings... window
from the Sequnece Preset popup choose: HDV - 1080i50
from the Capture Preset popup choose: HDV
from the Device Control Preset choose: Sony HDV 1080i50 Firewire
from the Video Playback popup menu choose: None
from the Audio Playback popup menu choose: Default
then press the Create Easy Setup... button
give your setup a Name (HDV - 1080i50) and Description (blah blah blah)
press Create... lastly, choose a filename for the preset, and save it to the default location

Unable to capture HDV with Sony HVR-V1E camcorder

Has any one else solved this problem?
Thanks
Lawrence Cave

See if this helps.
http://forums.adobe.com/message/4708997#4708997
GLenn

Capture from Sony HVR-Z1U

I have recently purchased a Sony Z1U and was unable to capture in FCE4. I later found out that FCE4 will only capture from the Z1U in DV mode and NOT in HDV. Why is this? Is all my HDV media useless now that I have FCE4? Should I only shoot in DV mode from now on? I also have a small Sony HRD-CX7. Will FCE4 capture from this device?
Any help for this newbie would be appreciated!

"do not connect to the computer. Connect it to the hard drive so they are on a single FireWire chain. The computer will have difficulty passing information back and forth on FW when there are multiple devices on multiple ports but on a single bus"
In theory this may be true, however my external drive only has (2) 1394b ports. My camera has (1) four pin 1394a port that converts to a six pin 1394a through the cable assembly. There is no way to chain these components together (via my external drive anyways) as far as I can see. Is this a critical issue? Should I invest in a different drive? I guess I could connect to my ED via esata using an express card. Would this approach lessen the load on the FW bus during capture and delegate a separate bus for ED control?
Any thoughts on this?
Message was edited by: Chad Clemens

Unable to capture HDV footage with FCP 5.1

I've captured HD footage onto my old computer (10.4.11) without any problem but now I'm trying on my new one and it doesn't want to know.
First off there was a problem with the Firewire port ejecting my hard drives randomly so I took it to be repaired and they replaced the logic board and the port works fine.
I've looked at all the posts I could find, I've trashed my preferences, reinstalled Final Cut Studio ( after uninstalling then updating the software). I've made sure the camera is set to HDV playback rather than auto and that the iLink HDV/DV conversion is off. I've tried all the easy setups and all the custom ones I could think of but still FCP (5.1.4) won't allow me to capture. On some settings I have had device control but no image, on others it said the camera isn't connected. The only way I've captured footage is by using the HDV Apple Intermediate Codec 1080i50 which works fine.
The camera is a Sony HDR-HC7 connected directly to the iMac with a Firewire 800 / iLink cable or daisy chained through my external hard drive with a 400 / iLink cable (neither of which makes any difference) I can also capture SD footage from both the HDV and a Panasonic SD camera when in DV-PAL setup. The HDV camera also shows up as connected in the system profiler.
This is driving me nuts so any help would be appreciated and if there's any other info I can help with to make this clearer let me know.
Message was edited by: MrMajesticMole

I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
Steve

Cant capture hdv from my sony hdr-sr12 onto fcp 6.0

Hi. I recently got a sony hdr-sr12e hd camcorder and i am trying to edit some footage i filmed over christmas. However when I come to click on log and capture i get a message saying:
Unable to Initialize Capture Device
Device is not connected or the capture preset is not setup correctly. You may still log offline clips.
This might also happen if you play DV footage in an HDV device.
I used to use a canon mv630i video camera if that helps?
Would really appreciate any help because I want to get editing again!
2.4GHz core 2 duo processor
200GB Harddrive
Thanks

Two suggestions in this thread: http://discussions.apple.com/thread.jspa?threadID=1870782&tstart=0
There are hundreds more if you do a search.

Capturing HDV footage with incorrect timecode

Rookie mistake. I started shooting a new project on my brand new canon xh-a1s, and in the excitement I forgot to stripe my first few tapes. And it being a film project I've been constantly using the playback to look at the takes I just did. So what's happened is I don't have a nice clean 0;00;00 to 1;04;00 timecode on all the tapes, rather there are frequent spots on the tapes when it's started a new timecode at 0;00;00. So when I capture my footage into premiere pro cs3, it gets confused and either drastically unsyncs the audio or repeats the same 4 seconds of sound through the whole clip.
Oddly enough when you play the captured footage outside of premiere, in windows media player say, it looks and sounds fine. But premiere chokes on it everytime I import it or capture it.
Right now I've managed to capture successfuly going clip at a time with the capture now function, and staring at the timecode waiting to hit stop just when it gets to a new timecode. Sometimes I hit stop on time and it captures cleanly, sometimes I don't and it doesn't sync or skips the audio. But obviously trying to go through 8 hours of footage this way is an arguous, unreliable, and incredibly time consuming process. Logging clips doesn't work either because it never seems to stop the capture on time to save the clip.
Does anyone have any suggestions as how I can get the audio into premiere properly without doing what I'm doing now?

...or, always look at the timecode display in the viewfinder or the LCD before you press REC. The nice display will ALWAYS indicate when you've reset the timecode. If the display is 00:00:00.00 or similar and you are NOT the very beginning of the tape, pressing record will start a new time code sequence everytime.
If you have END SEARCH, use it. this will usually work as long as you haven't removed the tape. Either way, rewinding the tape until a non-zero timecode appears and then pressing REC works. The camera will increment the timecode from that value..
I'm not at my editting station, but I seem to remember that PPPro has a capture setting that will cause it to ignore timecode breaks--you then edit out the rough section at each break when editing. Unless you're going to do something clever like recapturing HDV after capturing SD, you're not going to use the timecode anyway.
Then in the future, always look at the timecode display before you press REC. There is really no reason to stripe if you always remember this.

Capture video from camera (Sony HVR-A1U) to Premier -Premier Crashes

I have Firewire connected between the video camera and my mac. Usually I capture my clips easily - they are shot on mini HDV tape. But today it causes the whole program to freeze and I have to Force Quit. The camera is on and connections on before I go into Capture.
When I begin to play the video before hitting Record -Premier stalls and a message "Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your project".
I am starting a new project, but even in a previous project it crashes. What is the problem? Is there any other way to access the video without using Premier while I resolve the issue.

All the settings are proper, like i said, it captures with the apple codec for HDV but that is only good for on the fly. iMovie captures it fine, it's just when the settings in FCP are set for HDV it won't capture picture through log and capture.
Are you guys actually reading my post??? I have given all the information that i can, settings are proper, so the post so far are completely redundant.

I can't capture HDV footage with my macbookpro

I'm using FCP5 and the Sony Z1. What can I do? what I need to do?
FCP don't recognize the camera
Message was edited by: Perro

Hi Perro,
Try telling us all exactly what methods you are performing that is causing you the inability to capture. System specs, capture settings, logging methods, deck connection, etc. Tell us what you are doing and someone might be able to tell what you're doing wrong. This isn't 20 questions here...
Also try a Google search for FCP capture Sony Z1 there's a lot of information out there.

Log and capture with Sony A1U camera, Sony HD700 HDV deck

Hello,
I am still having problems capturing HDV from a Sony GV HD700.
It sees the deck, can capture some, but then crashes. Anybody have experience
with certain decks and cameras not able to capture with Final cut 7?
I am stumped. Settings are HDV.....1080I 60 ... on presents.
thanks

[Read this|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkfl ows/#chapter=2%26section=0] to make sure that you are doing everything right.

Can't capture HDV from Sony z1 on FCP 7

Hi,
I have set 'easy setup' to HDV (I have also tried HDV Fire wire basic) I've followed tutorial on all the set ups to capture. But when I go to capture, FCP can control the play buttons and I can see the time code on screen but there is no picture or sound coming through to capture and is says 'Capture was aborted due to no incoming data from device'.
I have checked everything.
I followed all the suggestions in an older discussion in this forum -
Unable to capture HDV footage with FCP 5.1
This was the last post in that discussion:
"Re: Unable to capture HDV footage with FCP 5.1
May 23, 2010 4:37 PM (in response to MrMajesticMole)
I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now."
I followed all these tips and nothing has changed. This is the first time I am using HDV in FCP. I have used the same Sony z1 camera to shoot and capture DV footage in my current FCP set up and I've had no problems.
The only wierd thing is that under easy set up I selected HDV first with 'all rates' under frame rate. When that didn't work I tried "HDV fire wire basic". Then I tried to put the frame rate in a 50fps. When nothing made any difference I put the frame rate back to all frame rates and while still on Format: HDV selected HDV 1080i50 and also have tried HDV 1080i50 with 'all frame rates' and everythime I go back, it's defaulted to 'HDV 720p50' in the 'use box and frame rate 50fps.
I would really appreciate help with this.

Hi Russ,
Thanks for getting back so quickly.
I was feeling hopeful because I realised I had the fps rate set to 50 and when you said 25fps I thought that must be it. Unfortunatly it hasn't worked at all. It keeps saying there's no data incoming data from device, yet it acknowledges the timecode and I can control the camera from FCP.
I double checked my settings and made sure the camera was on before launching FCP. I am going to study the document you included to see if there is anything else I am doing that isn't working. I am wondering if there are some audio settings mucking it up.
If you have any other thoughts let me know. I will let you know if I figure it out.
Cheers,
Carolyn

Output to tape on Sony HVR-M10U

I'm new to FCP and editing but was doing OK in SD. Now my client has started recording HD on a Sony HVR-Z1U camera and has bought a Sony HVR-M1OU deck. I have a G5 quad and Final Cut Studio (FCP 5). I captured a scene using the HDV - 1080i60 easy set up. It looks like letterbox on the canvas and I edited it and now want to get it to tape. I only need to output it SD. I have tried many ways but so far have been unable to get it out to tape. I've spoke to the Apple Tech support three times and to Sony tech support and tried all kinds of things that they have suggested and nothing has worked.
If I try to use Edit to Tape I get "Capture preset is set to HDV. Edit to tape is unsupported with this configuration. Please use print to video." I tried this and it spent some time "conforming" video then it looked like it was recording (I could see the video on the monitor on the deck itself) but the tape came out blank.
I'm getting desperate. Please if anyone can help, I'd be very grateful.

Hi, David,
Thanks for looking. I just haven't found the Apple tech support people very helpful. It says in their list of supported products that they DO support both the Sony camera and the Sony deck in question.
The first time I called Apple tech support when I was having problems capturing the footage, the guy I spoke with didn't even ask me anything - he just said it wouldn't be anything to do with the software and would be the deck.
Then I went into my local Apple store and spoke with somebody at the Genius bar who knew FCP. He wasn't really able to give me much information but did suggest I should export the edited scene as a Quicktime movie but didn't seem to be sure of what settings to use. I did try to do that using NTSC anamorphic (I think from memory that was it) but still was unable to print it to tape. Each time I try anything I get a dialog box saying conforming video and it takes five hours or more before I find out each attempt doesn't work. So as you can imagine it's very frustrating.
I spoke with somebody at Sony who was very helpful but didn't know FCP and he suggested I get Apple Tech Support on the telephone and they could do a conference call with Apple, Sony and me to try and sort out the problem. I then called Apple tech support again and the guy I spoke with there just said "we don't do conference calls". He said the only support they give for free is very basic set up support and told me about the Apple Pro option ($199 each time or $799 for a year) but suggested I try the forum first, which I have done.
However, the guy at Sony had suggested I call the next day and speak with somebody there who know FCP and who wasn't there that day. I did that and he has been very helpful and is still being very helpful in solving my problems; even though they don't make the software they are still trying to help with it.
This is what I feel should happen. I spent $5000 on a computer (my sixth Apple computer in my computer buying history), a lot for a single person as opposed to a company, and then more money to buy the software. I feel very strongly that the tech support should be free and that if the person I speak to doesn't know the answer, he should at least say "I don't know, but I will try to find out for you". I feel that the guys at Sony have gone way beyond the call of duty to try and help me.
I appreciate your interest. Thank you.
Marla.

Capture HDV-AIC- no timecode?

Hi,
I usually capture HDV natively with easy setup HDV 1080i50 (PAL), even capture now I can get time codes.
But when I use HDV apple intermmediate codec to capture HDV, I dont get time code. Is that normal???
thanks
pH

Yes there is...you will be slightly compressing the footage when you capture at DVCPRO HD. But it is MUCH easier to work with.
In fact, one person who used this workflow noted that the DVCPRO HD codec smoothed out the artifacting the HDV causes with fast motion.
Shane

Capturing HDV 1080i50 with Sony HVR-Z1U

Similar Messages

Maybe you are looking for