Capturing HDV using Adobe Premiere CS3 - more than 20 minutes of video

Hello,
I'm facing a weird situation with Adobe premiere CS3, I use a canon XH-A1 video camera to capture video & recently started using adobe premiere for editing, the issue is if I start to capture HD video for more than 20 minutes, adobe is not able to capture the video (shows a red screen), but it works fine, if I capture upto 20 minutes of video.
I have in the past had to break down a single tape into 3 halves, to successfully capture the video, this is NOT the ideal way, as I have to babysit the video capture, to limit the capture to 20 minutes & restart it.
Has anyone faced this error? Any advice/pointers would be greatly appreciated.
Regards,
Kalyan.

Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down.

Similar Messages

Using Adobe apps on more than one account?

Is there a fix forthcoming for the problem running CS4 on Leopard, where you can't use Adobe apps on more than one user account at a time (via fast user switching?) When I switch over to my 2nd account, I get some sort of "licensing error" dialog unless I quit all Adobe apps in my first account, which is incredibly annoying.
Thanks.

Greg,
Adobe's single-user licensing allows for your installation and
non-simultaneous use on two computers. And the software may think that two different users are trying to use the software simultaneously. You might try contacting Adobe tech support and ask.
Neil

Can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

Yes, You can install and use the Adobe application on 2 computers (not more than 2).
You can get the details, http://www.adobe.com/products/creativecloud/faq.html
Can I use the software I download from Creative Cloud on multiple computers?
Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership. See theproduct license agreements page for more information.

Can i use adobe cloud on more than 1 computer?

can i use adobe cloud on more than 1 computer?

Ask in the Cloud Forum http://forums.adobe.com/community/creative_cloud
-and http://forums.adobe.com/community/creative_cloud/creative_cloud_connection

How to Use Adobe Pro on More than One Computer

If I am a subscriber, can I use Adobe Pro on more than one computer?

2 activations allowed - Cloud License http://www.adobe.com/legal/licenses-terms.html

Question: Using Adobe Premiere CS3 and a Sony GV-HD700

Hi,
My name is Gerry and I am new to the forum. My problem is as follows: I have my Sony player connected via USB2 to my workstation. I am using widows xp sp3 and the device is properly recognized. When I choose capture in Premiere I recieve a message stating that the device is off-line. I power it on and off, but I am not able to see footage in the capture window. My settings are as follows:
Capture settings = Capture Format : HDV
DV/HDV Device Control
Video Standard: NTSC
Device Brand: Sony
Device Type: GV-D300 * I do not see my device type listed in the drop down list
Timecode Format: Auto Detect
Check Status: Offline
The only options I have tried changing is the Device type, also changing the device control from Serial device control to DV/HDV Device Control.
Any direction in this matter will be appreciated.
Regards...

The Sony HDV700 will work with CS3 via firewire. Settings on the deck and in CS3 are important.
The HDV700 is too new to have its own settings. Select "Generic Sony," that works for me.
DO NOT set the HDV700 format to AUTO--set it manually to either DV or HDV depending on the tape format. Note also, that its often necessary to turn off the deck and turn it back on before the change is recognized by the PC.
You DO NOT selct serial control--you select Firewire or IEEE (I forget what the option is labeled.
Use the pre-assigned option in setting the sequence parameters (yeah, I know, you're capturing to the project window not the timeline, but this is where CS3 gets the capture settings.)

Using Adobe Premiere CS3 (ver. 3.2) with Microsoft AVI DV files (4:3, 48Khz) on timeline now ask render (red line) and before didnt.Proyect is DV NTSC standard 48Khz. What it could be?

Hi,
Normally during months the edition was done with Microsoft AVI DV Files (4:3 NTSC 48 Khz). No effects (just cuts). Proyect settings as DV-NTSC Standard 48 KHz
Since today when the work is done in a new or old proyect (DV-NTSC Standard 48 KHz) and if the same file (Microsoft AVI DV) is loaded to timeline now is showing a red line over the video on timeline (so requires render). There no effects. This never happens before. it is very weird.
The Premiere is CS3 ver 3.2.0.
This is happening to 2 computers with the same version.So far I know there is no changes on the systems
I was thinking to reisntall 3.0 and then test and the update to 3.2...
Any idea?

Hi,
It worked once in one of the computers. (AVi DV didnt show render red over line). BUt afterwards the problem got back. The only solution so far was to reinstall premiere, update to 3.2.0 in both pc.
It worked for a while then problems was again. Reinstalled for second time, so far 2 days still ok.. It is very weird. I unchecked updates from cs3 and windowsfor just in case has any relation.
Thanks for your tip anyway.

Login Using tns entry takes more than one minute

Hi all,
I have created one 11g R2 database. I am trying to login to the instance and it works fine when I login using just the username and password. But when I try to login using tns entry its taking too much time to login. Also when I try to connect from a remote machine using Toad or any other client its getting timed out or takes too much time to login. Once I get connected everything works fine.
The Database is installed on Rehat Enterprise Linux Server relase 5.3
Regards
Navas

Hi,
The output of tnsping is pasted below.
tnsping IDMREPO
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 06-OCT-2010 12:37:53
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/home/orarepo/app/orarepo/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = IDMREPO)))
OK (0 msec)
Regards
Navas

Adobe premiere cs3 and youtube

Hi Everyone,
Please give me some input on how I can use adobe premiere cs3 to create videos for youtube.... specifically... the videos that I will be working on will contain all of the same basic elements...
1. Still Images and Clip art only... no moving video... I want help with uploading the stills/clip art and also with timing who long each still with stay up individually....
2. Speech bubbles (the kind used in comic strips) timed to pop in above above the heads of those people or characters in the stills and clip art... I want help with timing when the bubbles come in and with creating them and saving them so that in future videos i won't have to create them again...
3. Voice over parts done by me to read the parts in the bubbles timed for comic effect... I want help with steps on how to do this...
4. Music added throughout the video just below my voice overs... same as above...
All of my videos will contain these elements... and I want to find an efficient way to set up adobe premiere the first time so that every time I go in to do my youtube videos in the future it will be just a matter of uploading the stills setting a time duration each still and the speach bubbles... reading the voice over, adding the music and then uploading it to youtube... I am new to the software and would appreciate any steps that could be give to help me accomplish these four goals...
Thanks,
John

the music you liked was made by chris duncan (who comes to forums but has been busy so hasnt been around lately ).. called " when goblins frolick " ...perfect title for the music.
probably should move this discussion to the lounge area cause it sorta has to do with learning some aspects of programs in general and certain techniques etc.. not really about cs3 and youtube per se...
but anyway..moderators will do that if they want to...
it is a little difficult at first to use photoshop to do what you want, and to use masks in cs3 or just fade graphics in and out and make them appear when wanted..move around etc...and also text issues ( sizes that show up OK on screen are usually pretty large ( pt ). But you'll find when you get past the initial learning part it will open up all sorts of very cool opportunity.. and freedom to do what you imagine...
AE is also used for animation stuff but I dont use AE myself...
if you search for animation tutorials using text baloons you may find some good one that walks you through the process...and maybe even you can find samples of things to download and experiment with on your computer.
my advice is to go ahead and learn what you can and do your own graphics etc .. cause that will open up all kinds of cool things for you to do .. not only in animation things but other things too ...
good luck !
local library might have a good book on animation stuff using adobe products ( versions you have).. can usually search local libraries with computer at home...

Can I use Adobe Premiere and Photoshop (with cloud license) on more thn one computer.

Can I use Adobe Premiere and Photoshop (with cloud license) on more than one computer? WHen on the oroad I would like to use it n my laptop, while I installed on the desktop.

Hi Kasiah,
As per the EULA accepted while you launch Adobe applications you can download & install on 2 systems but can use on one at the same time.
Source:http://www.adobe.com/in/products/creativecloud/faq.html
Let me know if you have any questions on this.
Cheers~!
-Mandhir

Capture(or import) from Sony DCR-SR75E to Adobe Premiere CS3

Hello,
I have an Adobe Premiere CS3 installed in my mac.
I have used it with my Sony Fx-1 perfectly.
I purchased an new sony dcr-sr75e handycam and have problem capturing or importing.
When I connect the camera to the computer, I don't open capture, and when I try to import the mpg files, I only get the video of the files and I don't get the audio, and the video is imported very low quality. Can you please help me?
Thanks in advance,
Levent

Copy the files from the camera to your PC then import them into Pro. Pro only captures through firewire.
If the audio contains ac3 copy the ad2ac3dec.dll file from Encore in Program Files and paste this in the root of Pro CS3.
Reimport all files or start a new project.

Adobe Premiere CS3 will not open!

Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.

First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt

Capture issues in Adobe Premiere Elements 11

I'm using a Sony DCR-HC40 NTSC DV camera conneted to my computer by an Arcsoft EZCap USB video grabber. Whenever I try to capture footage with it, the image is distorted, with a messed up bar of colored lines at the bottom of the picture. Even if I change the project presets to the correct camera settings, it doesn't solve the problem. The camera has a frame size of 640x480 with a pixel aspect ratio of 1.0, but when I look at the properties of the captured images, it says that it is 720x480 with a pixel aspect ratio of .9091. I should mention that the camera and EZCap work fine with my StopMotionPro program, and that when I import pictures from those folders into Adobe Premiere 11, those pictures are OK too. The problem happens only when I try to capture directly in Adobe Premiere. Please Help!

andrewdaboss
Thank for the follow up.
Go firewire all the way. The adapter ia not know to work.
Open Premiere Elements 11 to the Expert workspace and set the project preset in accord with the DV 4:3 or 16:9 OR HDV camera setting.
Do this manually before you go to Add Media/DV Camcorder or HDV Camcorder.
Expert workspace File Menu/New/Project and Change Settings
In Change Settings, set for
NTSC DV Standard
or
NTSC DV Widescreen
or
NTSC HDV HDV 1080i30
or
the PAL counterparts, depending on your area setup.
Before you exit that area, in the new project dialog, make sure to have a check mark next to "Force Selected Project Settings on This Project".
When you get back in the Expert workspace, then Add Media/DV Camcorder or Add Media/HDV Camcorder and proceed.
Please review and consider and then we can discuss this further in the morning.
Thank you.
ATR

Adobe Premiere CS3 not activating

Have a copy of Adobe Premiere CS3 which I bought years ago. Had it running on an old laptop but want to install it on a more recent one and for some reason it refuses to activate. My internet connection is fine so no idea why it is not activating.
Any ideas?
Thanks

I enter my serial number in the section reading 'I have entered my serial number and want to activate now.' Then I click next and choose to activate now using the internet. I get a green loading bar that runs for a few minutes and then just get a message saying: Activation - no connection.
Simple as that; just several options for other types of activation (internet is only suitable one for me) as well as a note about HTTPS not working behind some firewalls and looking into proxy settings. I don't believe this to be the problem however.
My internet is working fine but the product won't activate for some reason...

I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

Capturing HDV using Adobe Premiere CS3 - more than 20 minutes of video

Similar Messages

Maybe you are looking for