Capturing in Apple pro res codec

Hi,
I am trying to capture the Cinealta HD footage with blackmagic card using apple pro res codec. i am not getting full res 1920x1080, getting only 920x720. anybody experienced this kind of problem.
i am using Fcp 7, mac pro with 4 gb ram.
pls suggest.
C V Rao

while we've got some Blackmagic users here, you probably want to talk directly to Blackmagic.
bogiesan

Similar Messages

  • How can I get the Apple Pro Res codecs for AME?

    Just wondering if anyone can give me a walkthrough on how to get the Pro Res codecs recognized in AME, haven't had any luck.

    Nevermind.  Found this and it worked perfectly: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5411

  • Can I export diaporama with apple pro res codec

    Hi
    I want export my daiporama for use in FCP or compressor , butthe codec H264 or Mp4 is too destructive, I want to keep a good quality video, and then optimize the compression.
    Is this possible?
    It was possible before i in IPhoto.

    The best you could do is use a custom setting like this, that is all Aperture is offering:
    Set it to "Quality: Best"

  • HOW DO I CONVERT F4VS TO APPLE PRO RES?

    Hi, I need to transfer a premiere pro project as a XML to FCP so i plan to convert the files into premiere pro  into Apple prores so they can opened in a Apple Pro Res project in FCP. The files I need to convert are the original MOVs and F4vs so the movs won't be a problem but the I've tried converting the f4Vs in Adobe Media Encoder and it seems to suggest I need FCP installed on my computer to convert them to pro res bu there must be a way of getting F4vs in to FCP. This is a project I'm transferring to be opened on someone elses computer in their FCP so how is this done?
    PLEASE HELP!
    I have the apple pro res codec already installed on my computer and downloaded a free trial of Pavtube but when I tried converting a F4v file into prores it said I need Final Cut already installed on my computer so would wondershare say the same thing. Sorry but I just want to be clear so...If I convert all the movie files in my Premiere Project into Apple Pro Res then export that as a XML then send all the individual files along with the XML project file to another computer they would be able to open the XML project all good and fine in FCP7?... There isn't any speed adjusted clips in the project as with those I nested and converted them into f4vs in Media Encoder then reimported them into the Pro project, then there are a few clips that I have adjusted the scale and postion and put on a slight fade on some clips- would those effects transfer to FCP7 ok ?
    The project files I used in Pro are-
    Editing Mode: DSLR,
    25fps,
    frame size 1920 x 1080, vertical 16:9,
    Pixel Aspect Ratio, Square Pixels (1.0) 
    Fields : No Fields(Progressive Scan)
    Sample Rate 48000,
    Video Previews-
    Preview File Format I-Frame Only Mpeg
    Codec Mpeg I-frame
    So if they open a project in FCP7 with as much of those settings as possible and in Apple Pro Res and then import the XML would that work?
    Any advice would be extremely welcome and I'll be very greatful.Cheers
    Simon

    Try using MPEG Streamclip. Seems to work for a lot of folks.

  • Apple Pro Res 64-bit Encoding

    I've looked everywhere and tried everything...
    https://helpx.adobe.com/premiere-pro/using/whats-new-7-1.html
    At the bottom, under "support for new camera formats", there is a section regarding support for  "Apple ProRes 64-bit" as a new camera codec. I looked everywhere in Media Encoder and the only thing with a "64" in the Apple Pro Res Codecs is under Apple Pro Res 4444 in the "Maximum Bit Depth". However, this option was already available so that 's not what Adobe could be reffering to... I understand that there is support to utilze the 64 bit capabilities to quicken the transcoding process but does anybody know anything about a new Pro Res Codec at 64-bit? Where it is? What it entails?
    Anything at all would be awesome. Thanks.
    -Dimitri

    Hi Dimitri,
    It's 64 bit as in it uses a 64 bit process on a Mac. It does not refer to 64 bit depth. The only and main difference is that encoding ProRes is going to be faster now.

  • Apple Pro Res 422 versus Apple Intermediate Codec

    I'm new to the world of FCE HD. I'm transfering video from a Canon HG10 to my MacBookPro and storing on an external drive. Earlier projects are bringing in video with Apple Intermediate Codec compressor... no problems, editing doesn't require rendering... Now video is being brought in as Apple Pro Res 422. The Pro Res is requiring that I render everything once I bring it from the viewer to the canvas. I've searched all menus, preferences and settings looking for where and how to change this setting. Does anyone have a solution to this snag?
    The data rate for Pro Res 422 is 15.3mb/s and for Apple intermediate codec is 9.9
    None of this makes sense to me... please assist.

    Hi(Bonjour)!
    How did you convert to ProRes 422?
    ProRes 422 codec is a part of final cut studio 2.
    FCE HD cannot edit nor render in ProRes like Final Cut Pro. You material havs to be NTSC, PAL or AVCHD and HDV (converted to Apple Intermediate Codec).
    Michel Boissonneault

  • Target codec say Apple Pro Res 4444

    I just downloaded Canon's EOS Movie Plug in, why does my target codec say Apple Pro res 4444? Thanks in advance.

    NEVERMIND! I found it!

  • Apple Pro Res Export

    I am exporting a project that I am sending to be authored. I have already exported the menus in Apple Pro Res 422 (1280x720). This was the most efficient way to preserve my 16:9 anamorphic setting.
    When I export the entire movie however, I get dozens of -av.mov files that are linked to the primary mov file which is only 2gigs. What exactly is going on here? If I send a hard drive out with all these av.mov files, can the guy who is authoring read the primary file?
    Any info is much appreciated.
    Thanks!

    In your FCP System Settings (Shift-Q) check to see if the option to Limit Capture/Export File Segment Size is active. It's normally toggled off, but the default size limit is set to about 2 GB (2000 MB), so that's why I'm asking.
    One caveat: if you're exporting to a hard drive that is formatted for Windows use, leave the setting and box checked because many Windows drives (formatted by Macs, especially) won't do larger than 2 GB files. And no Windows system will recognize files larger than 4 GB.
    So I guess what I'm saying is, before you 'correct' your issue, confirm with your authoring folks what system they'll be using. If they are using a Windows box, they definitely won't be able to read your files - the ProRes codec isn't available for Windows.

  • CS 5.5 renders apple pro res poorly compared to CS5.0

    Hi hi,
    This is my first time posting here.
    I'm experiencing a loss in the quality of text in my rendered video after migrating from cs5.0 to cs5.5, and I would like to know if there is any way cs5.5 could give a better render, or if I should switch back to cs5.0 for the time being.
    The video that I'm rendering consists of two videos: a video of a power point presentation, and a video of the speaker/presenter pip'ed over the power point video. The text on the power point slide is poor quality when exported from cs5.5 compared to the same video rendered in cs5.0 with the same settings.
    All of my source video is apple pro res LT codec, and was captured on a AJA Ki pro device. My sequences are setup as progressive to match the source.
    I'm exporting as MPEG2-DVD
    Export settings:
    Again, I've rendered the same project in both cs5.5 and cs5.0 each with the same export settings; however, the cs5.5 rendered video has blurry text (exspecially on the charactors such as the 'e') on the power point slides where the cs5.0 looks fine.
    system notes:
    I have the latest quicktime version installed.
    Working on window 7 systems.
    Comparison (Note: This is actually a pretty good case for cs5.5. Other slides in previous renders were much worse, but you can still see the difference here.):
    CS 5.5
    CS 5.0
    Thanks,
    Ted

    Seems  5.5  is not applying MaxQuality sharpening.
    Is this a direct export from Premiere or did you send it to AME?
    I have found a sligt difference when doing this.

  • Trouble with flickering after converting AVCHD files to Apple Pro Res 22

    Hi guys.
    I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
    But I am having trouble with the files after converting them to this format.
    Every 60 frames I have a blurred frame.
    This results in a flickering effect when watching the clip.
    The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
    I have captured a still shot of the frame here
    http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
    Here are the settings I am using for the conversion
    http://www.willpower.net.au/DOWNLOADS/Error.JPG
    Here is the converted file in Apple Pro Res 22 format with the flickering
    http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
    I'd appreciate any help that you can offer.

    Actually I think I might have found the answer.
    After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
    So I think something got lost when converting the files to apple pro res.
    I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
    I'll come back to this post after shooting and making a little test movie today.
    Thanks for your help.
    PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD)

  • Vixia HF200-apple pro res?

    I've searched online and throughout the apple forum, but I can't find any info that discusses the best sequence and project settings to use with a Canon Vixia HF200 camera. I bought ten of the Vixia HF200's for our school to use with Final Cut Pro 6.06 running on Quad Core and a few 8 core Intel Macs. We can ingest perfectly. No issue. And I am probably using the wrong settings, but I set the sequence preset to Apple Pro Res HQ 1920x1080 24p. Our cameras are all set to cinema mode24p. For easy setup we have been using Format:HD, Rate:all and Use at DVCPro HD-1080pA24. Our sequence settings are 1920x1080 Custom 16:9, Pixel Aspect=1440x1080, timebase=23.98 and compressor apple Pro res HQ. I've played with other settings and editing is fine and the video looks fine. However, on most of these settings we are seeing some weird by product. All exported 1920x1080 video has flash frames throughout the video. You can watch the video on an NTSC monitor or on the computer monitor and there are no flash frames. But once you export using Quicktime Movie Apple Pro Res HQ 1920x1080, then that exported file shows multiple flash frames. Again, I'm sure I have all the wrong settings. Can someone respond with the optimal settings for editing AVCHD @ 24MB from a Canon Vixia HF200 within FCP 6.06?

    Did it work before?
    If so, what did you change?
    If not, have you tried installing the latest ProRes Codecs?
    x

  • Where is apple pro res format in mpeg streamline??

    i'm brand new to this. have a canon 5D Mark II and final cut express 4.
    am using mpeg streamline to convert files to work in FCE.
    people here seem to suggest "apple pro res" format but i don't see it in mpeg streamline.

    ProRes is only available with FCP. For FCE you have to use the Apple Intermediate Codec.

  • Is Apple Pro Res viewable on computers WITHOUT Final Cut installed?

    I have used Apple Pro Res to compress 3d animation and it looks great, far better than any codec so far. Now I find that it is only viewable on computers with Final Cut Pro 6 installed.
    I am planning to exhibit the work as quicktimes, but need to use computers without Final Cut installed. Is there any way to import the codec into a Quicktime pro library so movies with Apple Pro Res are viewable on computers WITHOUT Final Cut on them???
    Thanks!

    ProRes is only licensed with FCP, and can only be installed along with FCP. You could transcode your clips into the Animation codec and try playing them on the other systems.

  • Apple pro res 4444 info?

    COuld someone tell me the data rate for apple pro res 4444 codec? how many megabytes per second does it demand? Will I be able to run it from a 7200 rpm firewire 800 single mobile drive?
    Thanks!

    http://www.apple.com/finalcutstudio/finalcutpro/apple-prores.html

  • Using Media Manager to convert movies to apple pro res

    Using Media Manager to convert movies to apple pro res,  How can I convert my existing media files  from quicktime movies into apple pro res 422 ?
    After they are converted will I have to re-point my fcp project to the converted files?
    Thank You for taking time to answer these
    Carl

    Sorry, I am not following.
    You said you have converted them to prores LT & are having this issue, or is it with H264 files in your edit?
    How did you convert? using media manager, or compressor?
    if you still are using the H264 media that would be the issue.
    That is not an editing codec. it is a delivery codec.
    The thing to have done would have been to convert to prores before you started editing.
    or did you do that?

Maybe you are looking for

  • New hard drive won't recognize my iPhone

    My hard drive crashed and my replacement hard drive won't recognize my iPhone. I can see all my content, but can't move or replace it. I was able to access content on my iTouch just fine and luckily synched my contacts back into my laptop, but no dic

  • Time issue on MacBook Pro

    Hi, I've had a problem with my mac for some time. Whenever I open or modify a file, the time shown is incorrect. The date is always correct, but the time shows 7:08pm for everything. The same occurs in Time Machine backups, iCal events and email from

  • External LaCie Problems

    Hi, I have a 160GB LaCie external hardrive which I accidentally unplugged during a data-transfer. Since doing that it will not appear on my desk top no matter what connection method i use (firewire or USB). I've tried connecting it to other computers

  • SG-500 - SNMP OID for CPU Load?

    Hello, i have several SG500 (Standalone and stacked). How can i get the CPU Load via SNMP? Who knows the correct SNMP OID for CPU Load? In the MIB which are provided as download a wasn't able to find the correct OID.

  • Airport Express: determine the best wireless network

    Hello all! An Airport Express (last years model) can connect to one of 3 Accesspoints which would all be fine for my needs (lets say WiFi network wifi1, wifi2 and wifi3). Unfortunatly, I could not see a way to tell which one deliveres the best connec