Capturing in CS5 from HVX200

I am having trouble capturing directly from my Panasonic HVX200 into CS5 on a Mac. I am able to capture from a DV tape fine, but not straight from the P2 cards. i keep getting a "wrong input format, try changing camera format/capture settings" message. What am I doing wrong? I am connecting through firewire on the Mac. Thanks!

As Jim said, be sure to copy the top level folder to your hard drive, since Metadata is contained in the folder http://forums.adobe.com/thread/1015001?tstart=0

Similar Messages

FC 5.0.4 capturing from HVX200 - DVCPRO HD 1080i50 codec missing?

I am running FC 5.0.4, tried to capture 1080i50 footage from P2 and keep getting message about missing DVCPRO HD 1080i50 codec. What to do? Where can I get this codec?
thanks!

I'm afraid you'll have to reload FCP 5 to get them... Best to uninstall it first.
Here's the way to do it:
1) Close FCP
2) Go to: /users/username/library/preferences/
a. Delete the com.apple.FinalCutPro.plist
b. Delete the FCP User data folder.
3) Go to: Applications
a. Delete FCP application
b. Delete FCP HD addition easy setups folder.
4) Go to: /library/applicaton support/fcp system support/
a. Delete Custom Settings folder
b. Delete Plugins folder
5) Go to: /library/receipts/ and delete the following:
a. AnalogPAL.pkg
b. AppleIntermediateCodec.pkg
c. DigitalPAL.pkg
d. DVCproHDCodec.pkg
e. FinalCutPro.pkg
f. FinalCutproHDUpdate4.5.pkg
g. FinalCutProHelp.pkg
h. HDVCodec.pkg
i. IMXCodec.pkg
j. Uncompressed422.pkg
k. VideoOutSupport.pkg
6) Insert the FCP 5.0 upgrade disk and re-install.
7) Run the OSX Disk Utility
a. Select the OSX drive
b. Repair the Disk Permissions.
c. Reboot.
8)Run Software update to get back to 5.0.4.
Jerry

Capturing 1080p 24p from p2

I have received a drive with footage that was shot on the Panasonic HVX200 with P2 cards. After speaking with the DP, the format of the footage is DVCPro HD 1080p 24p (not 24pa). After performing the Log and Transfer, when I look at the clip I see 3 progressive frames, then 1 interlaced frame (repeats).
Page 66 of the manual for working with FCP & HD video indicates
To remove standard 3:2 (2:3:2:3) pulldown from 1080p24 footage, you need to
capture the footage as 1080i60 (29.97 fps) and then use Cinema Tools to remove
the pulldown.
Page 100 indicates:
The Import Panasonic P2 window cannot remove standard 3:2 pulldown.
To convert footage with 3:2 pulldown, you can ingest the media at 29.97 fps and
then use Cinema Tools to remove the pulldown.
Page 103 indicates:
Use Remove Advanced Pulldown command in Final Cut Pro or Cinema Tools after capture or ingest.
I am familiar with Cinema Tools, and have performed the conform process before with footage from the HVX100 in Standard Definition with no problem. However, when I attempted to remove the pulldown in cinema tools, the footage appears unaffected even though the frame rate is now 23.98.
I read in another manual "Workflow for Final Cut Pro and the Panasonic AG-HVX200"
that 1080p 24 is Not supported at this time.
Has anyone had success capturing 1080p 24p from a p2 card and then removing the pulldown to get 23.98 with progressive frames?

Just to make sure, since you mentioned advanced pulldown. You should be removing regular pulldown, not advanced pulldown. Also, conform is for files that are already progressive. What you want is reverse telecine. Try doing a batch reverse telecine on a few clips. I've had problems in the distant past doing it on single clips because I wasn't starting with an A frame.

How to capture an image from a clip

Hi,
Is there a way to capture an image from a movie clip using iMovie 06?
I would like to save some frames from the vedio footage as photos.
Any help will be greatly appreciated. Thank you.
New Mac User
Mac OS X (10.4.5)

Hi iMac User:
Yes-you can save a single frame from iMovie by selecting the File-->Save Frame As option. From there it will ask you where and in what format you want to save it.
Just be aware that the quality won't be perfect because it is taken from a video clip.
Sue

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

Unable to properly capture HD video from miniDV tape in FCE

unable to capture HD video from miniDV tape
When I connect my Sony HDR-HC3 miniDV HDV camcorder to my iMac via firewire cable and use Final Cut Express to capture the video from the tape, I do not get a Capture window that allows me to specify in and out points, I just get a playback window that immediately starts capturing and the only option I have in this window is hit ESC to stop capturing. If I let this capture window continue to capture the video from the camera with miniDV HD tape, then the entire tape would be captured as one massive single video clip.
QUESTION: Is there something I change or do to make the proper capture window appear where I can specify in and out points to capture from tape for each clip?
NOTE: using same camera and tape with iMovie with automatic capture enabled, all the clips get captured properly. I also tried to use the manual setting in iMovie and it worked too.
More details(read only if you want more information)
I have a several miniDV tapes containing HD video created on a Sony Sony HDR-HC5 and Sony HDR-HC7. Unfortunately, both these camera were stolen, and I have since moved to a camera that uses flash memory, not tape. However, I need to get the video footage off these tapes, so I bought a used Sony HDR-HC3, it plays the HD miniDV tapes just fine and iMovie reads the video from this camera just fine, but Final Cut Express does not.
When I setup Final Cut Express, I used the Easy Setup and specified:
Format: HD
Rate: 29.97 fps
Use: HDV-Apple Intermediate Codec 1080i60
These setting match those of the camera and recorded tape. If I use any other settings but these, then Final Cut Express never sees the camera and never opens any capture window at all. Using Quicktime 10 movie inspector on the clips captured by iMovie from same camera, all the clips match this setting too.
Final Cut Express version 4.0.1
iMovie 09 Version 8.0.2 (821)
iMac 2.93 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 running
Mac OS X Version 10.6.4
My Final Cut Express scratch disk is a Seagate 2TB external USB 2.0 Hard Drive that has been formatted to be Mac OS Extended (Journaled). This external disk is also where iMovie successfully captured all the video from the same camera.

Thanks for the answer. It makes me sad. I thought using Final Cut Express would be an upgrade to a more robust editing system from iMovie, yet iMovie does a superior job of logging and capturing video from HDV video on miniDV tape in comparison to FCE. Not only does iMovie capture each clip on the tape into it's own video file automatically, it also includes timestamp information in the filename indicating when the clip was originally recorded, which appears to be something that is missing from Final Cut Express. Now I realize that HDV miniDV cameras had a relatively short life span in the consumer marketplace and have since all been replaced by flash and hard drive based AVCHD cameras, but from circa 2004 to 2007, miniDV HDV camcorders were very popular and I am sure there are lots of consumers that must be super frustrated by Final Cut Express limited ability to log and capture clips properly from these cameras.
Assuming I do not want to make a rough cut of video in iMovie and prefer to begin my editing project in Final Cut Express (not doing XML export of iMovie project), I need to determine the best way to get clips captured via iMovie into Final Cut Express and determine if there is anything inferior in the iMovie captured clips that I need to be aware of. So far it appears that both iMovie and Final Cut Express reduce the 5.1 surround sound captured on the HDV miniDV tapes to stereo sound, which is not a big lose given the 5.1 sound was recorded from camera's built-in microphone, but it makes me wonder if the video is reduced in any way by the iMovie import process, examining the video in quicktime's inspector window the video appears to be the same in both iMovie and FCE, but I'll research the answers to these questions elsewhere on this forum and post additional questions if I do not find the information I need.

How can I use Pinnacle break-out box to capture in CS5

A colleague uses Pinnacle's break-out box to capture analog video directly through CS4, bypassing Studio.
I have CS5, and bought Pinnacle Studio 14.
But when I open CAPTURE in CS5, I get a "capture device offline" statement. Anyone got any ideas?
CL

Or...
Old forum message, message now gone, but here's the summary - I have not used, only made note of the product "Matt with Grass Valley
Canopus in their tech support department stated that the 110 will suffice for most hobbyist. If a person has a lot of tapes that were
played often the tape stretches and the magnetic coding diminishes. If your goal is to encode tapes in good shape buy the 110, if you
will be encoding old tapes of poor quality buy the 300"
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes
Or ADS Pyro http://www.adstechnologies.com
ADS Pyro $120 http://www.bhphotovideo.com/c/product/462759-REG/ADS_Technologies_API_557_EFS_PYRO_A_V_Lin k_with.html
Pyro has low rating @Newegg and low at BHPV
Below said... I have the ADS Pyro AV Link and it works flawlessly and it bypasses MacroVision
http://forum.videohelp.com/threads/275966-Is-Canopus-50-55-100-110-REALLY-god-s-gift-to-th e-VHS-capture-universe
ADVC55 $159 http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Analog_to_Dig ital.html
ADVC55 has higher ratings at BHPV with very few low ratings and also high rating @Newegg
Next Article said Liked the ADVC55's picture quality the best
http://www.macworld.com/reviews/product/406056/review/advc55.html

How can I transfer CS5 from my old PC to my new PC?

How can I transfer CS5 from my old PC to my new PC?

You can download the trial version of the software from the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
If you do not intend to use the older machine any longer, you should consider deactivating it and uninstalling it from that machine. If you think you might need the option to use it, you are allowed to maintain two licensed installations.

How can I capture film clips from my Canon FS200 camcorder into my computer?

I've captured film clips from my Canon FS200 camcorder before so you can understand how frustrated I now feel not being able to do it today. I have just one 30-second clip on the memory card. It plays on my camcorder but I cannot transfer the clip to my computer.
I have an HP desktop computer that's two years old with plenty of hard drive space. I've tried capturing using the memory card inserted into the computer and I've tried using the USB2.0 port. Nothing works anymore. I used to capture with ease using Windows Movie Maker or Photo Gallery.
In the past when the capture was successful I would import the clips into Magix Edit Pro 16 for editing. I could never capture directly into this program though. I hope someone can help me out.

In Windows Movie Maker and Photo Gallery I click on Import From Device or Import Photos and Videos. A box appears but it is empty. The message above the box is, "if you do not see your device..." click Refresh. Refresh doesn't do it.
When I try to import with Magix Edit Pro 16 (a German video editing program) I get the message: "Magix could not connect to selected device."
I have run out of options. I don't know what else to do. This Friday I'm going to do some filming at a ballroom dance but I'm pessimistic about being able to capture the raw video to my computer.
This is an edit later in the day. Now I can capture into Photo Gallery and then into Windows Movie Maker or Magix. But I can only do this with the USB 2.0 connection. When I put the memory card into the computer slot, nothing happens. It used to work. Anyway, I'm glad I can finally do some practice editing again. I'm just in the learning stage with anything graphic.

How to capture the data from a JSP form

Hi
I have a JSP form, My task is to capture the data from a JSP and submit to Data Base. for example I have the field like
Enter Table name to be created in data base: The table name is to be captured by a servlet and by that table name, table should be created in the data base.
Edited by: Reddy_Prasad on ?? ?????, ???? ?:?? ???????
Edited by: Reddy_Prasad on ?? ?????, ???? ?:?? ???????

Get the entered value from the jsp into servlet using request.getParameter("enteredTableName"). it will return the String,pass this table name to execute query using JDBC connection and statement objects.
-cheers Ram

Capture of synonyms from existing online oracle9i database

Hello!
I am a newbee in oracle designer .I need to Design capture the ERP application into designer repository.The story goes like this ::
I am in a scenario where an ERP Application is running but without any documentation and configuration control.The Application is developed using Oracle10g Forms developer and reports,with backend oracle9i.The application and so database contains a lot of user schemas corresponding to the functional departments of organisation like finance , inventory.
I have successfully Installed the repository (version control option enabled) on our online database('oratest') and created a repository owner 'desg',with DBA Priveleges.
I have also created a database definition named 'oratest1' and a user named 'desg1' in the design editor's[b] System folder..
I tried to capture the schemas in following sequence (using the option - Generate/Capture designof/servermodel). ::
a. Login as Desg , Owner = sys-- Captured all tablespaces
b. Login as Desg , Owner = desg-- Tried capturing designer objects but was not very successful
c. Login as Desg , Owner = sys-- Tried capturing all sys objects , It took a lot of time with error and warnings and I was only able to capture some tables and views.I also tried with owner = 'System'.
d Login as Desg , Owner = sys-- Captured all users from oratest to oratest1(errors displayed 'Invalid grants ')
e. Login as Desg , Owner = sys-- Captured all roles from oratest to oratest1(errors displayed 'Invalid grants to user objects')
f. Login as Desg , Owner = User schema1(say inventory) -- tried to capture relational tables,views,functions,procedures etc. A lot of errors saying that invalid references to objects i.e referenced objects not present in the repository.
g. Noted down all dependencies using the DBA Views to user schema1 and captured corresponding objects from database into corresponding users in the repository.
h. Login as Desg , Owner = User schema1(say inventory) -- Again tried to capture objects of this schema.It gives error that ' Cannot capture synonyms with same name as objects name, either recreate or make all of them public'.
Following are my queries for which I need all your expert help::
1. First of all ,is the sequence in procedure above alright ?.Is it necessary to capture 'SYS' , 'SYSTEM' Objects ..What if I have already done so,will it cause damage? If so is it is possible to remove them from repository automatically?.I captured since the user schemas refer to these objects at several places.
2. Is it required to capture different User Schemas into different containers or just a single container ? If it is required to capture in different containers , how will tablespaces,users and roles already captured into system folder refer to objects in these containers.
3.Regarding problem of grants : When are the 'grants' be captured,before the capturing the objects or after them or anytime.Is it required to capture grants via a DDL file . Will a text file generated by export grants option in 'Toad' tool will do the job?.
4. Regarding Problem of capture of synonyms :: In most of user schemas , the private synonym has same name as the object which it refers.Hence designer is unable to capture the synonyms.If we make Synonyms public for a user schema than what about other schemas?. Secondly how to capture synonyms independently.Is it via a DDL File.Where in the design editor can we see the captured Synonyms?.How Shall we capture Public synonyms of our ERP application.
5.In the server mode tab, under relational table definition,I can see all the mixture of user tables and sys tables.How can we isolate the tables as per user schemas and generate Server model Diagrams for individual schemas.
Please help to resolve these Issues.
Thanks
With best regards

Thanks For your reply.
I am successful in capturing all other objects of the schema.
Before Your reply and before capturing other objects, I tried to capture the private synonyms by first creating a ddl file and than modifying the SQL 's 'create synonym' statements to 'create public synonym', and than captured the public synonyms into the repository via design editor. In short I captured the private synonyms as public into the repository.It gave 0 error and 0 warnings.
But where in the navigator pane can i see the captured synonyms. I cannot see any of them, so iam not sure whether they are captured or not.
After this when I captured other objects , they were captured successfully without any errors.

How to access Camera Raw when invoking CS5 from Lightroom 3?

When I invoke CS5 from Lightroom, my NEF files seem to load directly without giving me an opportunity to make adjustments in Camera Raw. If I open the same NEF file from windows Explorer, CS5 presents the Camera Raw adjustment page and I can make adjustments before proceeding.
How can I work around this?
BTW I know I can make camera raw adjustments in Lightroom and then open in CS5, however for an image that I know I will be using CS5 on anyway, I don't want to do anything at all in LR just go direct to CS5 but I can't do this if this bypasses my ability to make adjustments in camera raw!
I must be missing something here, can anyone point me in the right direction?
[I'm using Camera Raw 6.1, LR3, CS5 12.0.1 x64; Invoking CS5 from LR3 by right-click on image, Edit In > Edit in Adobe Photoshop CS5]

That workaround did work for me so thanks for the helpful reply!
If anyone else has other ways of making this work I'd like to hear about it.
Thanks,
Eric

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Can I capture the video from the TV card or video capture card to publish

Can I capture the video from the TV card or video capture card to publish?
I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

Hi,
iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
This then denotes the pixel content of each frame.
OS X 10.6.x tells me this is iChat 5 which in turn mean you have at least an Intel Core 2 Duo Processor.
This should be capable of 30 frames a sec at about 640 X 480 pixels (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
iChat 5 cannot do HD (Max of 4:3 ratio at the above figures)
After that it depends how you are recording the chat.
Quicktime X would do it.
iChat will do it itself (if the Buddy agrees)
10:14 PM Wednesday; February 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.

Dears ,,
how to change the path that sysprep were copied to reference computer when i capture the image from reference.
Should i modify some codes in LTIAPPLY.wsf? how to modify it?
Thanks.

Sysprep and capture has *Three* steps.
1. Run sysprep on the local machine (easy).
2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
3. Capture the drive in an *offline* state from within WinPE.
What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
a 100MB partition.
By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
Keith Garner - keithga.wordpress.com

Capturing in CS5 from HVX200

Similar Messages

Maybe you are looking for