Capturing in FC EX3.5 with canon xm1

Whenever i try to capture in Express 3.5 HD using a canon xm1 and using the firewire basic setting as recommended in the below link FC EX just crashes
http://images.apple.com/finalcutexpress/pdf/finalcutexpress3.5_qualdev.pdf
anyone know whats going on? currently having to capture in iMovie instead the open the project in final cut.
Thanks

Try Trashing the Preferences as detailed here:-
http://docs.info.apple.com/article.html?artnum=93690
(Ignore the mention of FCE 2).
Ian.

Similar Messages

Having issues with playback and capture with canon's hdv XLH1

We have the sony hdv deck for capture, but we recently got the canon hdv xlh1.
When we try to capture or playback on the sony deck using a tape with canon footage, it stutters and drops frames, anyone else having issues with this? Deck control is non existant when we hook up the canon to the system.

Well... yes and no... Canon's 60i will play thru the sony machine, and it will play from the camera on thru FCP, but without deck control. Everything else the canon shoots aka HDV (30p and 24p), the Sony deck will not play correctly at all. We just happened to have the Canon rep at our FCP user's group tonight, and this is what he reported. ALSO he said that FCP will be supporting this new format shortly... (whatever that means... LOL...) The camera itself is not currently supported by FCP.
It does have an interesting feature though. If you have a Kona 2 card and an audio card, you can capture from the camera true HD in 4:2:2 color space. It has an SDI HD output.. but doesn't carry the audio with it. Course this isn't a "cheap" workaround for now because you'd also need an extremely fast disk array to capture the HD. and an audio card, and an HD video capture card... yikes. That Panny P2 camera lookin pretty good right now eh?
Jerry

Can you capture while shooting with canon XL2 in fcp on Macbook pro

Is there a way to capture or record directly onto macbook pro hd thru final cut pro, or thru log and capture window while shooting with Canon XL2.
If yes, how, please!
Thanks,
Zia

As usual, Jim is correct. There's a reasonable possibility that something could go wrong with the capture; without a tape backup you would be hosed.
Here's what I do for live multi-camera recording (it works as well for single camera setups):
• Connect all cameras to a video switcher/DVE
• Connect the switcher's output to a DVCam VTR
• Connect all audio sources to an audio mixer
• Connect the audio mixer's output to the same DVCam VTR
• Connect the DVCam's Firewire output to my Mac
With this set up I can switch/mix live between cameras while recording to the VTR and simultaneously to the Mac in FCP.
Not only do I end up with the live mix recorded to tape and captured in FCP, I also run 'safety' tapes in each camera for additional backup in case the TD (me) makes an error.
-DH

Anyone used/using the Canon XM1 with iMovie?

Hi again,
I've been offered a second-hand Canon XM1 at a reasonable price and wondered whether it might be the cure to all my problems with loading video into iMovie as it has a Firewire connection and is on the supported camcorder list with Apple.
Does anyone have any experience of using this machine with iMovie? I'd really appreciate your comments (good and bad) before I part with more cash for another camcorder.
Thanks in advance,
Dom.

I had to look up what an XM1 is and found out it is a PAL GL-1. I have the GL-1 (NTSC) and have never had a problem loading it into iMovie.

Problem with Canon iPF8300

Hi everyone, I've got a problem with my Canon iPF8300 and Photoshop CC.
I've installed the latest drivers (3.01), last OS (10.8.5) and last Photoshop (14.1.1).
I cannot print on a A3+ sized paper, the printers print only a piece of the image, like it was set a bigger paper size, but I double checked that.
I had to play with the AppColorMatchingInfo.xml and add Photoshop CC to the list of apps, becuase before that I couldn't even print at all. The print received the command but all the jobs went on the job queue but didn't print.
With Canon Plugin I can print without any problem, but the plugin misses the Adobe CMM...
Any workaround?
Thanks

First clarify this statement...
I captured video, and when I went on FCP and did log and capture, it said the camcorder was offline.<</div>
Have you already captured with this camera or are you trying to capture with it now?
If you're trying to capture with it now, are you capturing to an external harddrive? If so, the problem may be because you're overtaxing your FW bus.
If you're not already, you might try capturing to your internal (so the iMac is only accessing the camera on the single FW bus), then transfer the media to an external to edit.
Does the iMac recognize the camera? (check in System Profiler)
Is the camera in playback mode?
Have you tried shutting down and making sure your camera is on before opening FCP?

Problem with Canon LPB 6670,

Hello, I have problem with Canon LPB 6670, while printing both sides the paper is jammed every time

First clarify this statement...
I captured video, and when I went on FCP and did log and capture, it said the camcorder was offline.<</div>
Have you already captured with this camera or are you trying to capture with it now?
If you're trying to capture with it now, are you capturing to an external harddrive? If so, the problem may be because you're overtaxing your FW bus.
If you're not already, you might try capturing to your internal (so the iMac is only accessing the camera on the single FW bus), then transfer the media to an external to edit.
Does the iMac recognize the camera? (check in System Profiler)
Is the camera in playback mode?
Have you tried shutting down and making sure your camera is on before opening FCP?

Capturing media on a laptop with only one firewire input

So, this question may or may not belong here: I have a MacBook Pro with its single Firewire port. I have an external firewire drive for my scratch disk. But how do I capture media from my tape-based Canon HV40 onto the external disk with only the one firewire port? Is there such a thing as a firewire Y-adapter (i.e. two into one) or is that even possible? I'm thinking I may have to capture one tape onto the laptop's drive, then disconnect the camera, connect the external drive, drag the files there, and finally, after all is done, let Final Cut know that the scratch disk has been changed and the media is not on the laptop drive any longer but on the external firewire drive. Suggestions welcome, please.

I realize that the slower device on a daisychain will mean that the fastest speed is limited by the speed of the slowest device
My understanding is the speed of the bus will be restricted if you have the SLOWER of the two devices connected directly to the computer. If it is: FW400>FW800>Computer, each device should connect at their normal speed.
In any case, count yourself among the lucky as Canon cams often will not work when connected on the same firewire bus with other devices.
x

Color synching with Canon

I have a powerPC IMac G5 running 10.4.10. I can't get colors correct when printing with Canon i9900.
Specifically I'm getting too much magenta, not enough green. When I try to color correct whites turn green but the grass still doesn't get to the green on the screen. I have Spyder2 color calibrator but it doesn't seem to do much with the iMac (maybe I'm not using it right?) I've tried changing the color temp to 5000 and calibrating in color synch but that doesn't work. Problem occurs printing from Photoshop and also from Preview.

Here is a more obvious sample : (white balance on the book)
Capture One picks 2050K, tint 12
Lightroom picks 2350K, tint 0
Guess which image comes from Lightroom ;)
Jeff Schewe : I hope that this topic will encourage ACR developpers to build a better profile for 300D. I tried to forge a 10D raw file with exiftool and the result was the same : I suppose that for now 300D and 10D are affected.
John McWilliams : For the first sample, converters do not pick the same temperature setting either.
Geoff the kiwi : I agree, colors cannot be exactly the same between several converters. I'm looking for color accuracy for input camera profiles.
Red ..emotion should be done by retouching and not decided by a crappy calibration :D
You can
download this sample RAW file.

Problems with CANON 40d

Hi.
I have reed the topics related with CANON cameras but none resolved my problem.
I'm quite new to mac world but I recently purchased a MacBook Pro 2.66 that came pre-instaled with snow leopard. What was my surprise when a plugged my CANON 40D to it with USB cable! The computer doesn't recognize the camera! The camera keeps flashing the "Busy" message and nothing else works. Strange, I'm quite new to MACs but my wife have a MacBook Air with Leopard and everything works OK. What's wrong then? Anyone has or had the same problem?
I see i'll have to purchase a CF card reader, since I don't have any I have to "BOOTCAM" in order to take my photos off the camera...
What a shame!
Thanks for an answer!
Luis

Yep, me too.
can't import raw pics on aperture 2.1.4, iphoto 09, image capture app, or adobe bridge.
Thanks Apple.

IMovie footage shot with Canon XL2 looks exports to m4v which looks lousy

Video shot with Canon XL2, captured/imported into iMovie, it looks good in iMovie but when sharing it, it turns into m4v. Is this correct? Burned DVD in iDVD and it looks lousy. Isn't it supposed to be a mov file and not m4v?

Does that require me to get rid of my 100 Hz or 200 Hz screen and exchange it for a 24 Hz screen?
No. This stuff looks equally good on CRT, Plasma or LCD. (Though I do recommend leaving off such things as 100 Hz modes, as they have a tendency to produce the opposite effect, making film look more like video.)
Film shot at 24 FPS is shown as 48 half frames,
Where on earth did you get that idea? Film is always shown theatrically as whole frames, whether 24 or 48 fps.
When will you send me the ticket?
Opening day for my first fiction project will be in my cousin's basement home theater, on a 9 foot screen with overhead projection. I'll let you know when the release date approaches. Better get your ticket early, though. I'm expecting a line all the way around the shed, stretching clear to the garbage cans.

FCPX with Canon XF Series Cameras - MXF wrappers

Canon XF300 but same format for other XF cams
Just doesn't work - no way to import.
Maybe have to wait for Canon to write something.
Works fine with FCP7 and natively with Adobe Premiere.
The majority of FCPX is geared to iMovie, iMovie, iMovie
What a let down
Glad I haven't bought yet - (tried a friend's)

As far as I know, FCP X is a great video editing software, but it also has many problems about movies importing.
Sometimes, Log and Transfer (Capture) can't work well with Camcorders/camers, so we have to download and insatll a Mac video converter to help us to convert footages to ProRes for FCP.

Can No Longer Scan With Canon MG5220 But Printing Works Fine

Hello,
I have not had luck with Canon so hoping my Apple community can come through for me Here is my problem. I have a Canon MG5220 "all-in-one" that I am able to print to just fine. I was able to scan a year ago but something has changed and I am no longer able to scan. I have all the Canon software and the error I get is as follows when using MP Navigator 4.0 EX:
"Error 2.10 - Cannot communicate with scanner. Cable may be disconnected or scanner is turned off. Check status."
I have deleted and re-added my printer several times but that has not done anything. I believe there was a time in the past when it was scanning properly that I had a separate printer icon under "Printers" on left of "Print and Scan" sscreen for the scanner but not sure (can someone confirm?). Regardless, I only have one now.
My printer is connected as follows: MG5220 is wireless to my FiOS Actiontec router and then hardwired Ethernet to iMac. I have turned Wi-Fi status on and off o Mac and that has not made a difference.
Any help would be much appreciated.
Thanks,
epie

Open Finder and navigate to Applications > Canon Utilities > IJ Network Scanner Selector EX and open the Canon IJ Network Scanner Selector EX utility. This utility will search your local network for the MG5220 and if found, should show something like below.
If the MG5220 is found, ensure that it is selected - as opposed to "Do Not Use" - and then press the OK button.
Now open MP Navigator and select the Preferences (as shown below)
From the Preferences window, with the General tab selected, ensure you have the MP5200 Series Network set as shown below (which is for my wireless MG6250).
If it is set, press the OK button to close the Preferences window and then see if you can scan.

Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac. I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver. Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

Canon UFR with Canon IR C2550

My office has a canon IR C2550 and our tech support is fairly useless, hoping to get some help from you all.
Does anyone have any idea what error code -170 would be for the canon UFR, i.e. no matter what driver I try I get "an error occurred: -170" anytime I try to print.
The machine has job accounting, and I get prompted for the codes. I also seem to be seeing the machine since I can get stats (ink, etc.)

Hi,
We have the exact same problem with a few 10.6.2/3 machines and a Canon MF9170 using UFRII 2.06 driver. Out of 10 identical iMacs all built with the same image (but with different user accounts imported) 3 machines cannot print to this printer, giving "an error occurred: -170" immediately.
We have contacted Apple and Canon, tried resetting the print system, updating the driver, adding, removing, rebooting, deleting /library/printers/canon, reinstalling etc. all to no avail. Unfortunately cannot find another driver that works for this printer either. We are not using job accounting on any machines.
I've had multiple support calls with Canon to ask them what the error code -170 means, or any clue at all what might be causing it, but they just escalate the case and then close it.
If you ever find a solution we'd love to know what it was! Perhaps buy a non-Canon printer instead...

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

Capturing in FC EX3.5 with canon xm1

Similar Messages

Maybe you are looking for