Capturing in FCP6 from XH A1 in 24p please help
Hi, I'm using my new final cut studio 2 to copture from Canon XH A1. I shot some footage in DV SP 16:9 in 24f.
When I capture my footage it appears very blurry, many lines are washed out and it looks like a bad footage. Now, I've watched the same on TV and it was very nice. The question I have is if I'm setting my FCP and XHA1 correct for the capture. Here are the capture settings:
XHA1:
In VCR menue:
Signal Setup:
Playback STD_AUTO
Comp out_1080i/480i
AV-DV_OFF
HD Down-Donv_OFF
Letterbox_OFF
In Camera menue:
Signal setup:
Signal STD_SD16:9
Frame Rate_24F
Comp.out_1080i/480i
System Setup
DV Control_ONDV
In FCP 6.0.1
Easy set up:
Format NTSC, Rate 24.00Fps use cinema tools - 24fps from DV NTSC (I've also used format all formates, rate all rates and use DV-NTSC 24p (23.98) and I've tried custom set up)
The FCP sees the camcorder and captures the footage. However, the quality is poor as I've discribed above and also it captures ALL clips into one clip. It does not brake them into individual clips, even though I have set in user prefs "on timebrake start new clip"
Your help and advice is highly appreciated and will be highly rated.
Thank you both for replying to me.
I have tried DV payback and not auto and I've also tried 480. I also did try to capture with this camera at 1080i60 HDV and it was GREAT.
I'm gonna try all over again tonight, but one thing I've noticed is my by browser under the clip discription it shows 29.98fps. This is how FCP captured the video. I know for sure I've recoreded it at 24. I know for sure I was trying to set settinging at easy setup for 24p I don't know why it captured at 23.98.
Your thoughts are highly appreciated.
Thank you
Similar Messages
-
Can not select from my own MV. Please help.
Hello Gurus,
I have created a MV with following clauses
CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2 .... from table1,table2
where .....
I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
I can see the same under 'user_objects' view as an object of owner_name1 schema.
Could you please help me in understanding where I have gone wrong?
DB - Oracle 9i on unix platform.
Thanks in advance!
Abhijit.Oh! I missed to mention the exact steps followed by me which created error for me,
viz.
1) I have 2 Database and their users as follows
bq. i) DB1 in local server - 'localUser'
bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
3) Logged in to 'localUser' in DB1.
4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
i.e.
create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
DBLink was created successfully.
5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
the exact syntax I used is as follows,
CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2
From RemoteUser1.RemoteTable1@local_to_remote2
where condition1
and condition2;
The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
i.e. select * from MV_Name1; ---- neither this
select * from localUser.MV_Name1; ---- nor this works :(
Even when I try to drop the same MV it gives me same error. :(
Could you please suggest me anything so that I will be able to select from MY OWN MV ?
Please help Gurus. -
Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!
Welcome to Apple Discussions!
Is all the software on your computer up to date?
iTunes
iPod Updater
Also, try The Five R's
btabz -
I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD
To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao. -
Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
HT2604 I can't instal software from applications instal DVD! please help me!
I can't instal software from applications instal DVD! please help me!
hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
Thanks so much -
I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me
Take it to an authorized service center or Apple Store in the country where the phone originated. Apple does not sell iPhones in Pakistan, nor will they ship them to Pakistan.
-
As I was installing the Windows 7 on my Imacwith the bootcamp and stated how I wanted to divide the drive I put 160, but I want to add more space because of the adobe software it will not install two of them, so how can I add more on the drive space to from 160 to 250? please help thank you.
I'm not sure this is what you're looking for, but it might help:
"If you made the Windows partition too small
First, back up all the information on your Windows partition. Then run Boot Camp
Assistant to restore your disk to a single volume. Restart your computer and use Boot
Camp Assistant to partition the disk again and reinstall Windows. Don’t forget to install
the Boot Camp drivers after installing Windows."
(from Bootcamp Assistant Manual see pg 22) -
My new ipad2 wifi often crashes from the day I bought.please help me resolve
My new ipad2 wifi often crashes from the day I bought.please help me resolve
Is it still within the 1 year warranty period?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )
There is nothing that anyone here on a user forum can do to help you. If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
Nobody here can help you. -
My iPhone recently broke so I was sent a brand new iPhone to replace it, however, since receiving this phone, I cannot access anything which was previously backed up onto iCloud from my last iPhone. Please help me!
If you are trying to restore to an iCloud backup, this has to be done during the initial setup process. If your phone is already set up, you will have to go back to Settings>General>Reset and tap Erase All Content & Settings, then go back through the setup screens again and when given the option, choose Restore from iCloud Backup (see image below). Be sure your phone is connected to wifi and your charger as this will take some time to complete.
Also, your replacement phone must be running the same iOS version or higher to restore to your backup. If you are running an older version of iOS than the device that was backed up, your backup will not be visible when you choose to restore to your iCloud backup. If this is the case, you'll have to update your replacement phone first. -
When I try to create pdf from scanner, Acrobat shuts down, please help!!
When I try to create pdf from scanner, Acrobat shuts down, please help!!
Hi miketayber,
We would love to help, but need to know a bit more to get to the root of the problem. Please tell us:
What version of Acrobat are you using
What operating system you're on
Whether you've been able to scan previously
What you're scanning to (do you have the latest drivers?)
Is there an error message or number associated with the crash?
We look forward to hearing back from you.
Best,
Sara -
My safari app has disappeared from my ipad...please help me getr
my safari app has disappeared from my ipad...please help me get it back on my screen.
Check under Settings -> General -> Restrictions if you've restricted Safari
-
I get error code: c0000002 every time I try to transfer photos from my android phone. Please help..
I get error code: c0000002 every time I try to transfer photos from my android phone. Please help..
What are you using?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email
hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm
Maybe you are looking for
-
Class Media Tracker, error in tracker.waitForID(index);
Mi problema es que el al momento de ejecutar dice "Image Fetcher 0" y no me carga las imagenes Este es el codigo: import java.awt.*; import java.applet.Applet; import java.awt.event.*; import java.awt.geom.*; import java.awt.image.*; import java.awt.
-
Urgent:output for line item not working
hi we are trying to get the output at item level in the sales order.we click on the line item and give a print out..but it is showing details of other line items as well. is there a ways we can get a printout for only the selected line items. what we
-
How can I set two different emails in only one contact form?
How can I set two different emails in only one contact form?
-
Monitor Oracle E-Business Suite R12.1.2
Dear all, can someone help me to configure dmstool for Oracle ebs 12.1.2 to monitor the processes. Thanks in advance. Regards, Anoep
-
Time Machine Lost After Installing Windows
Last night I installed Windows XP using Boot Camp. Everything went great and Windows ran perfectly....well it is Windows so it ran okay. Now I noticed that I have an icon for the Mac HD like always and a new icon for the Windows partion (Untitled). N