Capturing keyboard sound when bouncing

I have a yamaha DGX 300. It has a gorgeous sound that I want to capture (much better than that available on the iMac instruments). I have connected the keyboard to my iMac and have been able to record midi on logic pro ( can also use it to drive the internal logic instrumnets. When I play the midi back the sound comes out of my keyboard. In other words logic pro is driving my keyboard presumably by using the sound card in the keyboard. What I want is to be able to capture that sound in logic pro so when I bounce the track the yamaha sound is captured and I can record it.
Any ideas on how to do this ?

Rob1.0 wrote:
I have a yamaha DGX 300. It has a gorgeous sound that I want to capture (much better than that available on the iMac instruments). I have connected the keyboard to my iMac and have been able to record midi on logic pro ( can also use it to drive the internal logic instrumnets. When I play the midi back the sound comes out of my keyboard. In other words logic pro is driving my keyboard presumably by using the sound card in the keyboard. What I want is to be able to capture that sound in logic pro so when I bounce the track the yamaha sound is captured and I can record it.
Your keyboard doesn't have a "sound card", it is a synthesizer/sample playback keyboard with a standard audio amplifier with speakers. I presume it has "Audio Out" line out connectors? You will have to route the audio output of the keyboard into whatever you're using for a soundcard on the Mac and then record it as an audio file.
pancenter-

Similar Messages

  • Fuzzing Sound When Bouncing

    When i bounce to an MP3, I am getting a strange static-y buzzing sound. I don't know that much yet about mixing properly, but so far, with all the songs I written, I haven't had this problem when bouncing. I don't hear this sound when listening to the song in Logic, just when it's bounced. Any suggestions? Is this related to the mix, to something I might not know about yet?
    Thanks!
    ps. What is the standard way that people communicate back and forth. When I make a post and someone responds and I want to say thank you, is it standard to post thank-you replies on the board? OR does that clutter up the postings?
    Thanks much,
    Sarah

    If you're new to mixing, the best advice that I can think of is to mix down to a basic AIFF to get the feel of it. I have discovered that I haven't had any difficulties mixing down to an MP3 as long as I have an AIFF as well. Ensure that your PCM checkbox is checked and set it accordingly when you bounce.
    jord

  • Weird sound when bounce to mp3

    Hi,
    When I bounce my tunes to mp3 I get this weird almost like a flanger effect over the whole track. I am sure I am doing something wrong but am not sure what. Could someone please give me some suggestions to remedy this.
    Thanks.

    Bounce in aiff to see if the problem persists; if not the import the file into iTunes and use it to convert to mp3.
    If you obtain the same result in aiff too then you could have some phase coherence problem and you should have a closer looks to every single track to check with different eq or efx settings.
    Remember that 2 sounds with the same frequency but with opposite phase erase themselves completely.
    cheers
    rob

  • Reduce keyboard sound when dialing

    How do I reduce the sound from keyboard when dialing? Iphone 4S

    I swear I'm not loosing my mind, my phone always dialed out silently regardless of the mute slide not being engaged until this morning when I hooked it up to my PC to pull a pic off of it and suddenly, ...voila - everytime I dial out now I have this obnoxiuously loud digital dial sound for every number I press. 
       I am fully aware that the mute button will take care of the noise, but who the heck wants to hit that everytime and it never mattered before.  WEIRD !!

  • 5600 - No Sound when trying to capture analog video

    Hi all, hope someone can help me on this one cause i have no clue here...
    I try to capure from my analog camcorder, but I have no sound when connect the  RCA or S-video video cable. The moment i disconnect the video cable the sound come back ....  
    I can capture audio without video or capture video without audio, but not at the same time !
    Any feed back will be greatly appreciated.. thx in advance..

    Well before someone could answer me i found a post here very similar to my problem....
    https://forum-en.msi.com/index.php?threadid=27065&sid=&hilight=faulty+rca
    Decided to test and the guilty was my rca cable...got a knew one and everything is just fine...
    Hope this help someone else someday .. thx u all

  • I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

    I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • Should Keyboard have the "clicking" sound when typing?

    I noticed that the MacBook Pros, when typing on them, have the clicking sound when pressing each key. My wired keyboard also has a clicking sound when typing. However, the MBA I just received in the mail, does not. Only the space bar essentially does. Is this the same for all of them? Thanks.

    Yes, this is normal. The keys don't really click, the spacebar isn't really a click but it makes a slightly more click like sound the other keys on the MBA.
    The latest MBP keys are more like the MBA keys I believe.

  • How can I capture the photo shutter sound when you take a screen shot

    I want to use the Mac's shutter sound that is used when you take a screen shot or take a Photo Booth photo. I tried Audio Hijack but it doen't capture the sound. I figure this audio file must be in the system folder somewhere.

    A camera shutter sound can be found in
    HD>LIBRARY>AUDIO>APPLE LOOPS>APPLE>iLIFE SOUND EFFECTS>FOLEY

  • My keyboard makes a weird sound when turns off or on

    Keyboard makes new AND weird sound when turned on or off?

    See Troubleshooting here  >  http://www.apple.com/support/ipodclassic/

  • When typing my password for opening my mac everything is normal until I type in any other field, then the keyboard sounds like an old typewriter and is exceedingly slow. Is there a software solution?

    When typing my password for opening my mac everything is normal until I type in any other field, then the keyboard sounds like an old typewriter and is exceedingly slow. Is there a software solution?

    Have you found a solution yet?

  • Clicking sound when using keyboard

    A strange and trivial question...
    Since upgrading to 3.1.1, the clicking sound that the Touch makes when using keyboard is only at a really low volume. Is this normal?

    Same problem here when upgrading to 3.1.1 from 3.0, keyboard sound went REAL low no matter what the settings were set to... I just did the latest update from 3.1.1 to 3.1.2 thinking they may have fixed the problem, but NOPE same low keyboard click sound. I'm working on downgrading back to 3.0
    This *****, i need the louder click sound sometime i type notes on my ipod while at work and it a noisy plant... i need to hear what i am typing...

  • How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
    Message was edited by: Diavonex

  • No sound when press physical keyboard keys

    Hello ! By clicking on the physical keyboard keys on my Blacberry Passport no sound ( tone) as when you press the virtual keys ( numbers, symbols, ....). And how are you ? What could be the problem? Is there a sound when you press the physical keys ?
    Solved!
    Go to Solution.

    Hi @SPBU 
    By design, audible 'typing noise' will not occur when pressing any of the physical keys.
    Audible noise will only occur when using the virtual keyboard. Thanks! 
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • MSI GE60 0ND - Keyboard making squeaky sound when pressed.

    Having this weird issue on my new laptop, out of nowhere I just realized my "w" button is making slightly loud and squeaky sound when pressed. I'm curious if in this product we could remove the key and put it back in?
    Thank you.

    I tried turning off AHCI in the bios which resulted in a bsod on windows startup. I then enabled AHCI again and started up windows. Windows then went into error checking mode and after about 30 minutes had the message that it was unable to fix errors with the system. Booted up normally after that and it was fine, however it took much longer than usual.
    Should I try disable AHCI and then run windows recovery so it puts a fresh copy of win 7 on the drive?
    Edit: I ran hdd tune before trying to disable AHCI, no errors were found and the hdd health was ok
    Edit2: installed https://sites.google.com/site/quiethdd/ which seems to have stopped the sound

  • My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
    Close all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Dreamweaver Error when using Record Insertion Form Wizard

    This is the error I'm getting: While executing onLoad in ServerObject-InsRecPHP.htm, the following JavaScript error(s) occured: At line 283 of file "C:Program Files (x86)\Adobe\Adobe Dreamweaver CS4\Configuration\Commands\ServerObject-FormCmnPHP.js":

  • Can't see my JLabel or JTextField

    When i run my code i cant see my Label or Text Field unless I hover over it. Someone told me to write paintComponent() instead of paint() and this does show the label and my text field but then it doesnt show do the code g.drawString(.......); Does a

  • AIR Debug Launcher Closes on Button Click in AIR for iOS test fla

    Hi, I'm working with a Flash CS5.5 AIR for iOS fla using AIR 3.0. Test Movie ---> AIR Debug Launcher (Desktop) worked as expected for a couple of weeks then suddenly began to malfunction. The debug launcher fires up correctly but anytime a button is

  • I think I found a bug with CC 14 in which text layers wont render! Super Annoying!!!!!!!

    I was editing a Youtube video and I noticed my text layers I added to my footage wouldn't render out on video. Instead my video would freeze then start playing again. I tried to render out as a ProRes file and it still happened. Then I just wanted to

  • Swapping Fn and Ctrl on IdeaPad U330

    After reading the review http://www.jrin.net/2008_09_26/lenovo-ideapad-u330​-initial-hands-on-review of new IdeaPad U330 I understood that the "Fn" key is in the left corner of the keyboard, this is a big problem for users that often are using classi