Capturing media onto Internal or External HD

Hello.
Quick question: When capturing media, isn't it better to capture it onto an external HD? If so, why is this the case?
Thanks!

Mark,
welcome to the forum!
It is a wise choice for several reasons, since your internal drive is busy running your OS and applications it is a good idea to keep media(which can also take a lot of space) in a separate location.
Also if you keep your media in an external drive it will b e safe should your machine die or have serious problems.
Another positive thing is that external drives are portable and you can take ypur media with you if you need.
However, not all external drives are suitable for editing.
Some suggestions for useful specs to look for:
FW800 or eSATA are recommendable
7200RPM
16MB cashe
less than 9ms average seek time

Similar Messages

  • Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

    Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents.  I have repaired permissions pn the main harddrive.  When I try too click on a disk I get the previously stated error.  I can't even open up information to see what permission/access there is.  It simply will not let me see the content.  It shows the content of my main hard drive when I have clicked the other harddrive's name.

    Solved:
    sudo chflags 0 /Volumes/"FCP Time Machine BU"
    sudo chown 0:80 /Volumes/"FCP Time Machine BU"
    sudo chmod 775 /Volumes/"FCP Time Machine BU"
    sudo chmod -N /Volumes/"FCP Time Machine BU"

  • Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

    hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

    If what doesn't work?
    If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
    You can then do any of several things:
    1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
    2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
    If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
    3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
    If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

  • Capturing media on a laptop with only one firewire input

    So, this question may or may not belong here: I have a MacBook Pro with its single Firewire port. I have an external firewire drive for my scratch disk. But how do I capture media from my tape-based Canon HV40 onto the external disk with only the one firewire port? Is there such a thing as a firewire Y-adapter (i.e. two into one) or is that even possible? I'm thinking I may have to capture one tape onto the laptop's drive, then disconnect the camera, connect the external drive, drag the files there, and finally, after all is done, let Final Cut know that the scratch disk has been changed and the media is not on the laptop drive any longer but on the external firewire drive. Suggestions welcome, please.

    I realize that the slower device on a daisychain will mean that the fastest speed is limited by the speed of the slowest device
    My understanding is the speed of the bus will be restricted if you have the SLOWER of the two devices connected directly to the computer. If it is: FW400>FW800>Computer, each device should connect at their normal speed.
    In any case, count yourself among the lucky as Canon cams often will not work when connected on the same firewire bus with other devices.
    x

  • Backup internal and external hard drives-TC and offsite

    I now have Mavericks 10.9.3 on my iMac with a 2TB (1.25 TB used) internal hard drive.
    I also have some external drives attached to my iMac with older iPhoto libraries and other files (total file sizes 940 GB and 505 GB).  I primarily use Aperture now on my internal hard drive, but still access those iPhoto libraries on my external drives on occasion.  I have Time Machine backup my iMac internal hard drive on my 2TB Time Capsule regularly.
    My primary question is in regards to getting another copy onto a larger external drive that covers my internal and external drives so I can have a backup off-site.  Online backup services seem to always exclude external drives.  So a physical drive I can have offsite seems to be the best option.
    A year ago I changed the destination of my Time Machine backup to be on a 3TB external drive (backed up iMac internal hard drive and the two externals).  However, when I changed the destination of the backup back to the Time Capsule, the TM initiated a brand new backup (it did not recall that I had backed up prior to that on my Time Capsule).
    I want to backup monthly, if not quarterly for my off-site storage.  But, if every time I change the destination drive for TM, a new backup profile is created, it will overwork my drives unnecessarily.
    Is there a backup program or a process on "disk utility" I could run parallel to TM that I just use quarterly capturing only the changes/additions in those few months for both the internal and external hard drives?  Also, is there a way to add an external drive to my Time Capsule that is solely used to wirelessly backup the two externals on a regular basis (i.e. keep the internal 2TB drive backing up to the Time Capsule; and the external hard drive attached to Time Capsule via USB used as the backup drive for the external hard drives)?
    Summary:  I need to backup regularly to the local Time Capsule/additional external hard drive.  The data will come from my internal hard drive and my two external hard drives.  I also want to do quarterly backups of the additions/changes to all three drives to have on an offsite external drive that I manually backup to quarterly.  Any help is greatly appreciated.

    Carbon Copy Cloner is not on the App store.
    Correct.. it is not approved because Apple do not like the fact that CCC (and most likely superduper) which are the most popular backup software for Mac because it makes a bootable clone. Apple will never approve of that. But let me assure you that is the genius of it. If the internal disk fails, you simply boot from the external. It is $40 but you can use on all the computers in your home.
    CCC is a clone.. ie when it does the backup, any changes on the drive are changed on the clone. It does not work like Time Machine which simply piles up incrementals until the drive fills up. The idea of CCC is a backup of the drive as it exists at any point in time. TM btw is also not a reliable archive, ie it thins backups constantly.. so you should never rely on it to archive old versions.. but in the middle of a project it does a good job to keep various versions of your files. That is why I specifically said in my last post do not stop using it.
    and you can keep using the TC just for the internal drive.
    Keep TM running to the TC.. that will then keep a current hourly incremental of your drive. You can set CCC in a way which is a lot more flexible. ie backup just at the end of the day. There is no need for constant hourly backups. So to answer the second question.. you are still using your TC and TM.. but I suggest you only backup the internal drive.
    Please read a bit from forum expert Pondini on the value of clones and TM.
    http://pondini.org/TM/Clones.html
    That's why many folks use both Time Machine and a bootable clone, to have two separate, independent backups, with the advantages of both.  If one fails, the other remains.
    Now the ports issue.
    You can of course continue to use USB2. Just that moving large volumes around will be slow.. as doubtless you already know.
    On your particular Mac since you missed out on USB3 which is a pain.. you can buy a Thunderbolt to USB3 adapter like the belkin.
    http://www.belkin.com/au/p/P-F4U055/
    I suggested the Thunderbolt to Esata (it is an older interface and the adapter is rather cheaper but I hear more reliable.. check reviews for both).
    http://store.apple.com/au/product/H8875ZM/A/lacie-esata-hub-thunderbolt-series
    Sata is the interface of the hard disk.. Esata just means external sata.. so it is native and without conversion.
    I was merely suggesting ways to speed things up. But as long as you don't run CCC on more than daily basis then I think you will be fine just with USB 2. It will take a while on the day you do the swap over for the archive volume, but if you turn off the power saving in the Mac and leave it run overnight it should be able to do most of it.. you need to realise it will have to deep scan both the disks.. to compare files.. but CCC is based on Rsync and it is extremely fast and efficient. I am just not sure I know how long it will take to do. Anyway.. there is a plan.. tweak and adapt as you see fits your needs.

  • I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

    I  have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • DNS Forwarding Same Internal and External Zone

    Hi,<o:p></o:p>
    So we have decided that we want our internal domain to be the same as our external domain e.g. domain.uk. I understand that split DNS can be used
    to fulfil this requirement but is it possible to set up a forward so if the DNS entry is not available in the internal zone it will forward onto one of our external name servers where it can resolve?<o:p></o:p>
    We are basically trying to avoid having to add the entry on both external and internal DNS servers for it to resolve. So far I have added the external name servers to
    the forwarders and disabled root hints which didn’t work. I’ve tried to add a conditional forwarder but it says the zone already exists. It seems the only to achieve the internal resolution is by creating the DNS entry both internally and externally.<o:p></o:p>
    Does anyone know if this is the case? It seems strange that you couldn’t point the DNS to another external name server for resolution? <o:p></o:p>
    Any help would be appreciated.<o:p></o:p>

    You must ask in networking forum
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS&filter=alltypes&sort=lastpostdesc

  • How do I copy an iPhoto library, which is on an external hard drive, onto a new external hard drive?

    I'm running out of space on my external hard drive, so I was advised to buy one with triple the amount of space.  So, I need to copy my current iphoto library, which is on an external hard drive, onto a new external hard drive.  I thought I could just drag and drop it in, but that doesn't seem to be working. 

    Make sure the external drive is formatted MacOS Extended (Journaled) and then drag the iPhoto Library to that drive using the Finder.
    Then double click the library in its new location to open it in iPhoto. Test it thoroughly, if it is working, before deleting the original library on the internal drive.
    To check the format of the drive, see (it says Aperture, but the same applies to iPhoto):  Format external drives to Mac OS Extended before using with Aperture
    iPhoto: Issues with FAT32-formatted drives

  • Can I split my itunes music library between and internal and external hard drive?

    Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod?  Here's my situation:  I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users.  I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

    If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive.  Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads.  You would need to manuay manage moving things from there if tht is not where you want them stored.
    Perhaps a "better" solution would be for you to invest a little mone into 2 external drives.  One to hold your entire iTunes library, and the second to be your off-line backup of the first.  This is the method I have gone with and I like how it works for me.  My entire iTunes library is on an external (portable) 320GB drive.  Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content.  For me, I purchase little content during a week, but I do move a fairly large volume of podcasts.  With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically.  This won't work for apps or purchased content, but for subscribed podcasts, it is great.

  • I have moved my Itunes media folder to an external drive and Itunes does not find the items in the folder

    Running Win7. I moved my entire Itunes library to an external drive to free up space on my laptop. Itunes recognized the change and all was well. That worked fine and I have synced several times from the laptop with the library on the external drive. Now the laptop is in the shop (sigh, not Itunes related a dead network card). I connected the external drive to my desktop, made sure my software was up to date. opened ITunes went to edit/preferences/advanced. Went to change Itunes media folder location and navigated to the proper folder on my external drive and clicked OK. None of the music, videos, etc, that are in that folder show up in iTunes on the desktop. Restarted ITunes, no help, reboot computer, no help. Have I done something wrong or left out a step. I could copy all the media onto the desktop individually and build new playlists but that seems like something that should not be needed? One of the reasons I moved my Itunes media folder to the external drive was so I could use the laptop for iTunes while travel and the desktop for iTunes while at home. Do I have to copy the entire folder to my desktop and take up space there? That would be counterproductive to using the external drive. I searched and saw a hint to hold down shift while starting ITunes but that did not change anything. Any help would be most appreciated!
    Jim in WV

    Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
    In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow?  In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
    Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

  • How do I download a movie from a dvd to my files then load it onto a portable external hard drive?

    I don't know how to download a dvd movie to my laptop. how do I do that. Then I want to load it onto a portable external hard drive and don't know how to do that either. I'm new at this , so please give answer in easy to understand terms. I don't know if i'm needing to download something to make it work or what. Please help!!!

    You would need to go to the computer containing the book.
    Select the saved book in the Collection panel.
    Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
    File>Export as Catalog and store on media you can use to transfer
    Bring this catalog onto your computer
    File>Import from another catalog and bring the transitory catalog into your master catalog.
    It should bring the images, your collections (including your book) and other settings into your own catalog.

  • ILife with both internal and external hard drives?

    I've been considering switching from a homebrew, multi-boot desktop to a MacBook for my primary computer, in part so I can hang out with my family in the living room rather than be exiled to the home office when I want to compute.
    But here's my concern: I have media. We have about 50 GB of iTunes; maybe 30 GB of iPhoto; and tons and tons of digital video that would be stored in iMovie. Obviously the libraries are all interlinked. And it's all growing. I also like to rip DVDs and re-encode them for my iPod and AppleTV. Right now, my desktop has 480 GB of internal storage and that's just about enough.
    I have discovered that the MacBook only comes with an option up to 250 GB. I absolutely need AppleCare, so I can't get an aftermarket hard drive. (All my Macs break - this one from the office that I'm on right now has a bum DVD drive, and my wife's has needed both fan and logic board replacements.)
    While I'm aware of the existence of external hard drives, I'm concerned about Apple's non-external-hard-drive-friendly way of storing iLife data. If I wanted to keep more recent or useful music and photos on the internal drive but older stuff on an external, and still be able to use iLife seamlessly, would that be possible? (I see myself editing recent video in the living room, but then hooking back into the external HD in the office if I need older stuff.)
    What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
    Thanks!

    Sascha Segan1 wrote:
    .. What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
    all iApps (iPhoto, iTunes, iM08) support usage of external drives as 'mass storage' devices.. you can tell all apps which drive to use for the Libraries.. there some tools out there, which even allow the usage of 2/many different Libraries in iTunes/iPhoto..
    for iM in detail: the Projects are small files, and should stay internal (allthough I'm discribing a 'hack' on my site: http://karsten.schluter.googlepages.com/im08tricks Project Library (and Events) on External Harddrive); the Events (=GBs) could be located on as much ext. HDDs as you want..
    but ...
    all iApps are single-user .. you can NOT 'share' Libraries to 2/many different users; the idea of a 'media server' which hosts/shares all kind of data to all kind of users is not 'on concept' of iLife ..

  • SCCM 2012 Capture media CD destroying HDDs

    Hey guys,We're having an odd issue down here in our office. To give a little background we have been using SCCM for about over a year now with little to no issues. This might be about the 6th image we have made via this same capture media CD so we definitely aren't new to the process.Every time we attempt to use the Capture Media CD it will get through sysprep just fine but when the computer eventually reboots as part of it's capture process it throws us the wonderful 'Non System Disk or Disk Error" message. Popping in Partition Wizard reveals that the MBR of the drive is being corrupted and every option to format the drive or otherwise perform maintenance is greyed out.We haven't been able to find anything online about this and have tried multiple different systems & different HDDs. . Has anyone experienced any similar issues?
    This topic first appeared in the Spiceworks Community

    Hi
    I don't know exactly how I should go with the virtual machine thing .
    This is just a small part in my work that I do, so I have done it the most "fastest" way for my self.
    Basically I just need 2-3 images with machine drivers and windows update installed. 
    If making image trough virtual machine would require me to create driver package for each model and then notice that x amount of devices still don't get installed and I would need to create installation package of those missing drivers. That is something I
    don't have time for...
    Also when using driver package and installation for some special drivers from their won packages it feels that it takes long. And if i have my stuff already in the WIM file, things go smoothly much faster.
    But if the virtualmachine trick is somehow superior, hit me with url. Thank you!
    Strange thing is that some time ago all worked fine. And I was thinking that if someone has seen this kind of problem before. 
    It somewhow feels that it's capturing all the drives I have attached to machine. Volyme 3 of 3. And volyme is a disk? Not a partition?
    I had usb stick (sccm capture media), machine harddriver with 350mb partition and the windows partition. Also external USB disk that it should save the WIM into.
    Probaply next I will test the same machine with different harddrive...

  • Pictures on both internal and external HDs

    Hi -My iphoto libray pulls pictures from both my internal and external hard drives.  When the external is turned off or disconnected, I get a lot of outline/exclamation point errors.  I'd like to pull all the external photos onto the internal hard drive, have all the pictures in one place, and ensure the whole set is backed up in time machine.  But I can't tell which pictures need to be imported without going one at a time...through 30000 pictures.  Sigh.  Is there a better way to do this?  Thanks!

    If you use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  to rebuild the library while the photos are available and the preference is checked it will create a new managed library - the old one will be intact in case you are not happy with the results of the rebuild
    LN

  • Would it be better to work with keeping media on internal PCIe Flash storage?

    Hello,
    I've always been trained to keep media on a separate drive away from the boot disk when editing video. I'm using Final Cut Pro X and that's the way I've always worked, but I'm going to be getting the new Mac Pro with 1TB of the superfast PCIe-Flash internal storage and I'd really love to take advantage of that tremendous read/write speed.
    My question: Would I be draining down the system's performance in keeping my 1080p Pro Res 422 media and FCPX projects on this new type of internal storage or would it still be better to keep my media on a slower external thunderbolt connected SATA hard drive?
    Other tech specs of this new system: 8-core xeon E5 processor, 32GB Ram, dual FirePro D500 graphics.
    Thank you,
    Reynaldo

    (Drooling...)
    I suppose the best way to find out is to try it.

Maybe you are looking for