Capturing more then 4 hours

Hello,
Why FCP (5.1) stop Capturing after 4 hours.
I'm Capturing from the TV cable box to my BlackMagic card and the Capturing stop after 4 hours, I try to this on another mac and it's sopt at the same point.
What is worng?
Thanks
Shimon Bukai.

Hi - welcome to the board.
Head into fcp Menu>System Settings and adjust the defaults there.
I have no idea what format you're capturing and what you are capturing to. Make sure you have ample disc space for the codec you are capturing.
If there are no constraints then fcp will write to disc.
Maybe there is something you can alter in the BMD set up ???

Similar Messages

Capture more then 2 Audio Sources in FCP7

I was reading some older posts about this topic but was wondering if I could capture more then 2 audio sources in FCP7. I am capturing video from a sony fx1000 using a shotgun mic and wireless mics and am using the HDV - 1080i60 settings in the Easy Setup menu and connecting with Firewire. Is there a way to capture and seperate both audio sources?

I think if you have a captured card that has more than 2 audio inputs, you can capture more audio tracks simultaneously.
Don't work with HDV much, but I know with DV material with 4 channels of audio with 32k sampling, you can capture all 4 tracks by customizing a capture preset to capture channels 3 and 4. it will require a second pass of capturing.

Problem with a long tracks like audiobooks, half or more then hour

Please, help me to solve the problem with forwarding or other navigation with long tracks... when i try to forward some long track my ipad do it with repeating of short pieces of that track, twice or more... but the time counter are working correctly and count all the time. At last i have a track forwarded to the midlle or less but ipod thinks that is the end of the track and switching to the next

Rustam,
I think the best way to do it is to create linking text boxes, so that the overflow of text from one box appears in the linked box on the next page.
To do this, go to View > Show Layout, then click in the gray margin area to make your cursor disappear. Now when you insert a text box, it will be defined as Fixed On Page, allowing you to move it wherever you want. Insert the first box, then click on the little blue "ear" on the lower right of the box. That will create a second, linked box. Drag that second box to the next page. Move and expand the two boxes as needed.
Adding a background color to text is easy. Whether the text is on the main text layer or in a text box, highlight the text, click on the Text inspector > More button, then check the Paragraph Fill box. From there, click on the color box, crayons, then choose the color you want in the background. Drag that color from the swatch into the paragraph.
-Dennis

Mail if no file available for more then 24 hours

Hi All,
I have one File to RFC scenario on PI7.1.
But now I have requirement that, I want to send error mail if file is not available for more then 1 day.
Can it be done in any SAP-PI standard way?
Or I need to write a small ABAP code on table SXMSPMAST to check if scenario runs in last 24 hour or not & then send alert mails?
Regards

Hi Rohan,
You need an ABAP code. There should be a table where you store all the file name PI receives and processes and the time and date when they have been received. The ABAP code will continuously check contents of the table and find out difference between current server time and date with the last entry in the table. If the difference is more than 24 hours then it will trigger emails to a fixed address or that may be obtained from a different table.
regards
Anupam

Taking more time(more then 12 hours) while syncing

I sync some music(about 340 MB) and pics (about 200 MB) to my new Ipad for the first time, and it was ok.
But when i connect my Ipad Second time to my laptop(running on Windows 8) it was syncing & taking backup for more then 12 hours but still it was not completed. Is there ny problem in My Ipad or in my Laptop or in Itunes.
Kindly help me,i bought my Ipad just 5 days before.

Hello,
Looks like you have a 1:M relationship from TableA to TableB, with a 1:1 back pointer from TableB to TableA. If triggering the 1:M relationship is causing you delays that you want to avoid there might be two quick ways I can see:
1) Don't map it. Leave the TableA->TableB 1:M unmapped, and instead just query for relationship when you do need it. This means you do not need to call tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA), so that the TableB->TableA relation gets set. Might not be the best option, but it depends on your application's usage. It does allow you to potentially page the TableB results or add other query query performance options when you do need the data though.
2) You are currently using Lazy loading for the TableA->TableB relationship - if it is untriggered, don't bother calling tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA). This of course requires using TopLink api to a) verify the collection is an IndirectCollection type, and b) that it is hasn't been triggered. If it has been triggered, you will still need to call tableA.addTableB(tableB), but it won't result in a query. Check out the oracle.toplink.indirection.IndirectContainer class and it's isInstantiated() method. This can cause problems though in highly concurrent environments, as other threads may have triggered the indirection before you commit your transaction, so that the A->B collection is not up to date - this might require refreshing the TableA if so.
Change tracking would probably be the best option to use here, and is described in the EclipseLink wiki:
http://wiki.eclipse.org/Introduction_to_EclipseLink_Transactions_(ELUG)#Attribute_Change_Tracking_Policy
Best Regards,
Chris

I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the Apple logo. How can I shut it down or reboot it?

I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?

It works really well.
Thank you for your tip.
Alain

Was downloading the new software update on my iPhone when it froze and has been in that state for more then 15 hours

was downloading the new software update on my iPhone when it froze and has been in that state for more then 15 hours.
tried turning it off didn't work. tried pressing buttons didn't work.
tried unplugging it and waiting for the power to die hasn't worked
tried the steps on the webiste but they didn't work
tried working it from the laptop doesn't connect because i can't put in the passcode.
also tried calling iTunes support but due to the holiday no one is answering
what can i do i need my phone!!!
thanks

i was able to access the phone by pressing down on the off button and home at the same time

I have upgraded my Iphone 4s to 7.0.3 and after that my phone is not charging at all if i leave my phone for charging for more then 24 hours it will charge upto 50%. How do i solve this issue ?? pls suggest ??

I have upgraded my Iphone 4s to 7.0.3 and after that my phone is not charging at all if i leave my phone for charging for more then 24 hours it will charge upto 50%. How do i solve this issue ?? pls suggest ??

Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality.

Nobody told me not to charge my nano more then 4 hours a day!

My iPod nano was a gift for my bat mitzvah and I was never told not to charge it for more then 4 hours a day otherwise the battery will drain out completley! and i have an iHome so i just keep it in there all day to listen to music whats the point of having an iHome if i cant keep my iPod in it all day! Also my iPod nano is the old one so where do i get a new battery to put inside of it and does it ruin the memory or anything? Can i just take it to the apple store and have them put one in, and if it is still in warranty will apple replace the the battery for free and does instalation have a cost? Please get back to me as soon as possible!!!
Windows XP

If your Ipod only holds a charge for an hour then the battery does have a problem. But you might want to refer him to the Apple article that I gave you a link to. It will not overcharge and charging it does not weaken or hurt your battery. There is a number of charge cycles, complete charge cycles, but that should take you about two years of normal usage to reach that. About the replacement of the battery, it should still be under warranty and should be done under that. I am not familar with using an Apple store, there is only one and that is a couple of hundred miles from here. Hope this helps.

TS3694 pls help me guys ...i tried to update the new software update ios 7 but when i connected my iphone it took more then half hour to download but after it just shows me the icon on my iphone that connect ur iphone with itunes..it shows error(4005) hel

i tried to upgrade to ios 7 but it shows error 4005...it took more then 45 mins to download but after it just shows an image on my iphone that connect ur phone with i tunes i tried it but there's nothing happening and now i cant even use my iphone....pls help me what to do????

I have tried the steps to fix it but no solution! Please someone tell me what to do!

Rendering on more then one core

Hi,
I've been using mac's for a few years now but until recently I've not had reason to use Motion. now that I have I must say I'm really disappointed in out put.
Here's the scenario: I'm using OSX 10.7.4 on a 3.4Ghz i7 iMac with 8GB of ram. so I'd assume rendering a 30 second clip shouldn't me more then a minute or 2. alright I turned motion blur on... but does this really mean I should expect a 2 hour wait?
I had a look around and found in Activity Monitor that motion was only using 1 core. This astounded me and thus I quickly did an export on FCX, which used all of them. I'm not sure what the problem is but it seems compressor doesn't really want to be helpful considering that when I use the send to compressor function I get a file on 2 minutes... but no motion blur. (Activity Monitor still says only 1 core is in use)
Export using compressor settings is the closest I've gotten to it working but alas. Because compressor only uses one core this is no better. I say this is the closest because I've heard that a few years back you needed to make what's called a quick cluster to use all the cores on your computer. I made one. It doesn't turn up anywhere apart from the Share Monitor where it's happily displayed as an option but when I try to submit anything to it it's not available in either motion or compressor.
(The quick cluster by the way did capture all the cores, actually all 8 of them but thats with hyperthredding I'm assuming cos I'm sure this machine is a quad core.)
I've seen that people have had trouble connecting to quick clusters last year and where told by apple that there was no need because motion used all the cores anyway. But in my case this doesn't seem to be the case.
Should I try and re-install?
It's just I'm lost for what to do and it's really frustrating.
any help with any of the possible avenues or even one's I've not even considered would be very much appreciated

Not sure what you mean for "instances for motion blur"? If you mean motion blur samples in the project properties, then yes 60 is way to high (it will render 60 versions of the frame and merge them to give the motion blur effect) 8 is the default.
The idea of a GPU is that it does graphics much faster than a CPU can. If the CPU could do it faster we wouldn't need graphics cards. If you use a 3D app, you'll see all your CPU's maxed out, but that's a different kind of computing task.
Motion is built around the idea that you work in real-time. If you're waiting a few seconds for each frame, you need to find a workaround.
If you most of the slowdown is caused by the star particles, render that layer out as a movie, import it back in and use it instead of the particles emitter. The GPU now only has to overlay stuff on a quicktime movie, not track and composite thousands of particles. Infact, i'm guessing that you could render just 5 or 6 seconds and repeat it 6 times instead of 30 seconds.

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Seems to capture but then won't quit after ESC pressed?

We have new XRAID with Apple FC interface & running on Mac G5 and 10.3.9. We use FinalCutPro 4.5 and it all seems to capture but then won't quit after ESC pressed. The pinwheel spins and the Mac is unaccessible then after maybe 3 hours it finishes and everythings ok. Way too much time for a 15 minute capture! Aja Kona2 capture card and they have had me adjust the settings in the xraid admin but no change. Capture of a few seconds are usually finalized instantly. Any Clues?

Same problem if you don't choose capture now ?? I've always though capture now to the raid was a BIG NO NO.

Can numbers be loaded on more then 1 computer

Can numbers be loaded on more then one computer I own?

Question asked and answered four hours ago in :
https://discussions.apple.com/message/15542988
Yvan KOENIG (VALLAURIS, France) dimanche 3 juillet 2011 17:28:23
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Hi everyone i have just bought new Ipod touch 32 GB and upgraded to 5.0.1 and it it worse now my battery doesn't last long for more then hvvour. what should i do?

Hi everyone,
I have just bought new Ipod touch 32 GB and upgraded to 5.0.1 and it it worse now my battery doesn't last for more then two hour.
what should i do? it is seriously big problem.
Please help me.......

This is a general comment, not directed to anyone, and not to be taken personally by anyone. This ongoing screw up with the new upgrade (5.0.1) is getting to be a **** SHAME. In no way can APPLE or anyone else for that matter not know by now that the upgrade is terribly flawed. The Ipod machines themselves are super great products, and I enjoy mine to the max. However the upgrade once applied ruins it. And at least, not to my current knowledge, there haven't been any fixes forcoming.
In my opinion Apple should own up to that fact and warn folks that, even though the upgrade was presented with the best intentions, IT JUST AIN"T WORKING. And not to download it until further notice. This noticication could be done through the retail sales outlet, online, what ever.
I liken this to a pharmaceutical coming out with a new vaccine, encourage everyone to use it, then discover it's bad to the degree it causes it uses to become sick. Rather then pull the vaccine they keep on allowing unsuspecting ones to continue to vaccinate, and become sick. What a shame!
Charlie Lee

Capturing more then 4 hours

Similar Messages

Maybe you are looking for