Capturing Motion Video and a SNAP with one CWIMAQ Device

Hello,
I am using Measurement Studio 6.0 controls and I am trying to accomplish a Continous Acquisition and a periodic interval SNAP Capture with only one CWIMAQ control.
I have A CWIMAQ control attached to a 1 CWIMAQViewer this starts to acquire when I say go. Then every X interval I want to have a Still image from that CWIMAQ appear in a 2nd CWIMAQViewer control. This is Proving difficult at the moment. So far I have been able to stop the CWIMAQViewer1 update to allow my CWIMAQ control free so that I can alter it to do just a single frame SNAP. Then I attach that to the CWIMAQViewer2. But as soon as I start up the CWIMAQ control again now both my Second and First CWIMAQViewers are attached to the CWIMAQ video source. Ofcourse I want to just keep the still image in the 2nd Viewer while the 1st viewer show full motion.
I also tried a second CWIMAQ control which is attached to same device as the 1st control. This doesn't work, as it automatically stops the first CWIMAQ when I do anything with the Second.
Hope this is clear. All I want to do is start collecting motion video, then everyonce and a while get a snap shot into a different viewer so that things can be done to it, all awhile the full video should still be collecting.
Thanks

Thanks for the reply.
I did try that.
I may be doing it just wrong though.
Using the existing Ring example which defaults to create 5 buffers I put a small condition statement in the AcquiredImage function. So if it is not time to take a snapshot let the buffer attach to CQIMAQViewer1 just like the Sample code does already. If IT IS time to stop then attach CWIMAQ.Images(5) (Shot from Buffer 5) to the CWIMAQViewer2. It does this fine, except that even if it isn't time to Stop again the 5 Image in the buffer automatically gets attached to CWIMAQViewer2 because of it once executing the CWIMAQViewer2.Attach ... Method.
But I don't want it to automatically attach to that buffer until I tell it to. But I also don't want to want CWIMAQViewer2.Detach because that will make my Still image Viewer go blank.
Did I do what you described incorrectly?
Also. With the CWIMAQVision Control why will it not handle an image that is from a video source. Atleast it seems to not. If I were able to use the CWIMAQVision.WriteImage function using a CWIMAQViewer1.Image from a camera as my source then I would be able to to create a still frame and put that into a Viewer2. But I get nailed with an Incompatible Image Type when I try that. It works fine with a Loaded .jpg, like the CWIMAQVision.ReadImage command, then link that to a Viewer Control. Then I could CWIMAQVision.writeImage and a get a stored shot.
Some CWIMAQVision methods are OK with fast changes images and other not. IE. I can pass a CWIMAQViewer.Image as the source for a CWIMAQVision.Histogram2 function and get a histogram of the Light and Darks that updates with each CWIMAQ.AcquiredImage, but I can pass the same CWIMAQViewer.image as the source image for the CWIMAQVision.Threshold method to find display the 2 colour Light/Dark Intensity version of the Image. It tells me that the Image is incompatible. But I can do it with a still image .jpg which is loaded using the CWIMAQVision.ReadImage method.
What I want to do is capture Video. Then have the CWRangeSelect control show the Array data of the Contrasts, and have the Second Viewer show the Red on Black version of the Data from the Array. THen I can use that contrast ratio to calculate how much of the scene is what I am looking.
There will no doubt be more to this.
Thanks

Similar Messages

Download and convert Youtube video to MP3---Just with one click

Download and convert Youtube video to MP3---Just with one click
Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
Download, convert Youtube to mp3?—yes, you can.
Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
Step one: Install a Youtube Converter for Mac as follows:
Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..

Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

Can we capture the video and audio using cam and microphone in Edge Animate?

Hi Everyone,
I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
Can anybody help me out in this, please...
Thanks & Warm Regards
Vikas

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

How do I get Video and Audio Chats with PCs ?: FAQ 3

How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
Ralph

Hi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)

How does schedule with RESTful API a Webi report for a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

Hello Ricardo,
have you try a call like this one ?
    <schedule>
      <name>"test"</name>"
      <format type=\"webi\"/>
      <destination>
        <inbox>
         <to>userId1,userId2,userId3,groupId1,groupId12</to>
        </inbox>
      </destination>
    </schedule>
Regards
Stephane

I have a new phone and when asked do iwant to start this as a new phone or do a back up from my last back up. i chose the last back up option and it has taken all my recent photos texts and call off and replaced them with ones frow about 18 months ago.

I have a new phone and when asked do i want to start this phone as a new phone or back up from last backup, i chose to back up from last back up and have had my recent photos texts and call replaced with ones from about 18 months ago. is there any way of undoing this?

Welcome to the Support Communities. This Apple doc may be of interest:
Channel Member Code of Conduct
Kings74 wrote:
They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
"iPhone 5s — Available in silver, gold, and space gray" (Source)

Motion 5 and compressor 4 with FCP ?

Hi,
Is it possible to use motion 5 and copressor 4 with FCP 7 ?
Thanks
Ivan

Sort of – by exporting and reimporting as clips. There is no round-tripping. For example, you can't send a clip as a Motion project to Motion4, save and have the clip update in FCP. You'd have to export a clip (or sequence) as a self-contained movie and bring it into Motion (or Compressor), make your changes, exporty and reimport as a clip, see how you liked the result, etc. Much easiier to stay within FCS.
Russ

I NEED TO SHARE MY LR CATALOGS FROM LAPTOP TO MAC AND EVEN IPAD WITH NO EXTERNAL DEVICES - I WOULD LIKE ANY EDIT I MAKE FROM ONE COMPUTER TO BE MADE ON THE OTHER - HOW DO I DO THIS ?? THANKS!!

I NEED TO SHARE MY LR CATALOGS FROM LAPTOP TO MAC AND EVEN IPAD WITH NO EXTERNAL DEVICES - I WOULD LIKE ANY EDIT I MAKE FROM ONE COMPUTER TO BE MADE ON THE OTHER - HOW DO I DO THIS ?? THANKS!!

All the info you do with your image files is stored in the Lightroom Catalog file. The Catalog file cannot be located on a network it must have a physical connection to the computer.
While the Catalog is in use a LOCK file will be temporarily placed alongside which prevents its use by any other device.

Just bought the iphone 5 and before syncing to my mac i took some photos then finally decided to sync it but it deleted ALL of the photos and videos and replaced them with the old pics i had on my iphone4.. i need those pics please help

just bought the iphone 5 and before syncing to my mac i took some photos then finally decided to sync it but it deleted ALL of the photos and videos and replaced them with the old pics i had on my iphone4.. i need those pics please help

Nope.
Did you fail to import them before restoring from backup? If so, then they are gone.
You should import all photos taken with the iphone to your comuter regularly as you would with any digital camera, most especially before any update or restore.

Does motion 5 and compressor come with FCPX purchase?

Does motion 5 and compressor come with FCPX purchase? Is there somewhere that you can buy this in a package if so?

NNo. there seoarate applications. You want them? Buy them.

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

How many icloud account can we create with one ios device???

how many icloud account can we create with one ios device???

i need more then 1 account as i owe itunes some money and i cant access my app store so if i change my icloud account .....all my previous history wont be tracked

How can I capture live video and still image by a DirectX compatible USB webcam using LabView ?

Dear forum members
   I'd like to design a user interface which shows a live video and capture still images for it by a DirectX compatible USB webcam using LabView or NI Vision Toolkit, how can I do this ? and If this is possible How can I reach the webcam DirectX filter properties and set them using LabView ? I would be grateful to anyone Who lead me to the correct solution.
    Sincerely
    Cem DEMiRKIR

Cem,
    With our example programs you can acquire and save an image (IMAQ >> File Input and Output >> Snap and Save to File.vi) from one camera, if you double the VI's to create the image and the image task, you can easily have one program acquire and save for two cameras.
    I may need more information on what you mean by calibration. Do you mean basic camera setup? That can be done in Measurement and Automation Explorer by setting up the options within the IMAQ settings for each camera. Or do you mean more complex calibration for special types of images? The more description of what you mean, the better I will be able to help you get it done. You mentioned zoom and motion parameters, what kind of motion? Our vision drivers only control triggering the camera to acquire, then analyzing, processing and displaying the resulting image.
    If you have more details on exactly what you want to do, that would be great. Let me know if you have more questions, thanks!
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Capturing Motion Video and a SNAP with one CWIMAQ Device

Similar Messages

Maybe you are looking for