Capturing packets using NAM modules on Prime Infrastructure1.2
Hi,
I added or discovered all the NAM modules on my network to PI1.2. however, when i try to create a capture session i don't see my NAM modules list. or i don't see my NAM modules as datasources. this is despite the fact that the NAM modules are added to the devices list on PI1.2. let me know how to get this working.
Thanks,
Kerim
Hello Kerim,
We recently published a Cisco Prime Infrastructure Deployment Guide on cisco.com. There is a section on how to manage NAMs in PI 1.2, as well as how to capture and decode packets using PI 1.2.
Hope this helps,
Tejas
Similar Messages
-
Blocking network packets using java
Hello Friends,
I am trying to develop a firewall application using java.I am able to capture packets using third party library called jpcap(from sourceforge).
Now, the problem is how to block packets.There is no library as such ,to my knowledge atleast,to block network packets.I am finding for a solution
regards,
rajWhat do you mean?
Dropping a TCP/UDP packet would happen at the IP level. Given that TCP/UDP runs on IP (and ICMP as well) that means that basically you must impliment a stack.
Conversely it might be that the specific stack you are using provides that functionality and you just need to configure it. That would be done via JNI (and has nothing to do with IP/TCP/UDP.)
If all you are doing is proxying, which is what a firewall does, then you recieve a TCP packet and then just drop it or forward it. Doing that in a Java application however is not actually the same as most firewalls (certainly not dedicated boxes.) -
Two Copies of Each Packet seen using NAM
When capturing traffic for ONE vlan using the NAM I can see two copies of the same packet for every packet sent.
Can anyone explain this.
Thanks in advance.Hi and thanks for your reply.
We are using the following software versions on the various modules installed in the 6509s:
Model Sw
WS-SVC-NAM-1 3.4(1a)
WS-SVC-IDSM-2 4.1(5)S208
WS-SVC-FWM-1 2.3(2)4
WS-SUP720-3B 12.2(18)SXD4
WS-X6704-10GE 12.2(18)SXD4
WS-X6724-SFP 12.2(18)SXD4
WS-X6748-GE-TX 12.2(18)SXD4
The span session which we ususally configure usning the NAM is as follows:
monitor session 2 source vlan 206
monitor session 2 destination analysis-module 1 data-port 1
A "Show monitor" request gives the following:
Session 2
Type : Local Session
Source VLANs :
Both : 206
Destination Ports : analysis-module 1 data-port 1
I have had a look at the bugs that you listed. I amust admit that I dont really understand the description in the first bug report. The second bug report references a line card which we do not have installed so I guess that this one would not apply.
When we are capturing packets with the NAM as I originally mentioned it appears that we are seeing two copies of packests that are being received from a client within a particular VLAN but only one copy of packets that are transmitted back to the same client on the same VLAN.
In addition, if we perform a capture (using Etherreal) on the client in question, we only see one packet being transmitted by the client but we can see this same packet twice on the captures taken from the NAM. -
How to Capture the File Names of any extension using ssis
Hello,
Can you please let me know on how to Capture the File Names of any extension(EG : xls,text,.csv etc) at a time and stores in excel file using SSIS?
Any help would be appreciated.
Thanks,
Vinay sIf you need to act differently on each file type separately or if not all types of files are wanted, i.e. the Filespecifier cannot be *.* in the Foreach loop:
In the ssis package
make 3 variables:
to store the file extension, e.g. User::CurrentExtension of type string
to store the filename found in the directory: @CurrentFilename
to store the name of the directory where the files reside e.g. User::CurrentDirectory
make a foreach loop of type Foreach Item enumerator:
in the items list you add each file extension that you need
txt
csv
xls
xlsx
As Variable mappings map the CurrentExtension to Index 0
Inside this foreach loop add another foreach loop of type Foreach File enumerator, in the collection Expressions
add Expression Directory , set to @[User::CurrentDirecotry]
add Expression FileSpec, set to "*." + @[User::CurrentFileExtension]
In the Variable mappings, map Variable user::CurrentFilename to Index 0
Inside this loop use Execute SQL Task to insert the filename in a Excel connection.
Jan D'Hondt - SQL server BI development -
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir -
R/3 Master Data Extraction Using Function Module
Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
ThanksThe steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy -
Unable to capture image using MDT 2012
After running my Sysprep and Capture task using MDT 2012, MDT begins to capture the image and makes it all the way to ~94% and then stops and returns several errors. Any idea as to what may be causing this? Below are the errors returned during the capture
task and the ZTIBackup.log:
Error creating an image of drive C:, re=2
ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Create WIM.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The execution of the group (capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Create WIM. Execution of task sequence failed.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
ZTIBackup.log:
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context=""
type="1" thread="" file="ZTIBackup">
<![LOG[OriginalPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup"
context="" type="1" thread="" file="ZTIBackup">
<![LOG[Search for Drive: OriginalPartitionIdentifier SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014"
component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Found Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property OSDisk is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[BackupDrive not specified searching for backup drive]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[BackupDrive defaulting to Destination Logical Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Checking to see if we can store the backup locally]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Drive C: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Local store path = C:\StateStore]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Total used space: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Available space at C:\StateStore: 132373320]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Local store not permitted]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Network store path set to blank]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Network store path set to: \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Backup file name already set to: CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Using the backup path: \\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Validating connection to \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Already connected to server OCS-MDT as that is where this script is running from.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[Beginning backup of drive C:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[About to run command: "\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE]LOG]!><time="14:01:13.000+000"
date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Command has been started (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > ImageX Tool for Windows]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Files/folders excluded from image capture by default:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$windows.~bt]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$windows.~ls]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \winpepge.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Windows\CSC]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Recycled]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Recycler]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$Recycle.Bin\*]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \System Volume Information]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \pagefile.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \hiberfil.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Turning on VERIFY option for network share]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Scanning files and directories...]LOG]!><time="14:01:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 0% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 17 minutes (process ID 1568)]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 1% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 2% ] Capturing progress: 2:22:22 hrs remaining ]LOG]!><time="14:21:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 3% ] Capturing progress: 2:23:19 hrs remaining ]LOG]!><time="14:22:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 4% ] Capturing progress: 2:23:01 hrs remaining ]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 23 minutes (process ID 1568)]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 5% ] Capturing progress: 2:39:46 hrs remaining ]LOG]!><time="14:27:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 6% ] Capturing progress: 2:43:14 hrs remaining ]LOG]!><time="14:28:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 7% ] Capturing progress: 2:43:42 hrs remaining ]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 29 minutes (process ID 1568)]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 8% ] Capturing progress: 2:41:26 hrs remaining ]LOG]!><time="14:32:08.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 9% ] Capturing progress: 2:43:24 hrs remaining ]LOG]!><time="14:34:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 10% ] Capturing progress: 2:41:57 hrs remaining ]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 35 minutes (process ID 1568)]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 11% ] Capturing progress: 2:38:33 hrs remaining ]LOG]!><time="14:37:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 12% ] Capturing progress: 2:35:51 hrs remaining ]LOG]!><time="14:39:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 13% ] Capturing progress: 2:33:30 hrs remaining ]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 40 minutes (process ID 1568)]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 14% ] Capturing progress: 2:30:39 hrs remaining ]LOG]!><time="14:42:28.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 15% ] Capturing progress: 2:28:39 hrs remaining ]LOG]!><time="14:44:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 16% ] Capturing progress: 2:28:06 hrs remaining ]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 45 minutes (process ID 1568)]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 17% ] Capturing progress: 2:30:58 hrs remaining ]LOG]!><time="14:50:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 18% ] Capturing progress: 2:42:16 hrs remaining ]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 56 minutes (process ID 1568)]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 19% ] Capturing progress: 2:55:09 hrs remaining ]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 62 minutes (process ID 1568)]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 20% ] Capturing progress: 3:03:46 hrs remaining ]LOG]!><time="15:07:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 21% ] Capturing progress: 3:10:17 hrs remaining ]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 70 minutes (process ID 1568)]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 22% ] Capturing progress: 3:12:08 hrs remaining ]LOG]!><time="15:13:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 23% ] Capturing progress: 3:11:13 hrs remaining ]LOG]!><time="15:15:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 24% ] Capturing progress: 3:08:56 hrs remaining ]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 76 minutes (process ID 1568)]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 25% ] Capturing progress: 3:06:17 hrs remaining ]LOG]!><time="15:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 26% ] Capturing progress: 3:03:27 hrs remaining ]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 81 minutes (process ID 1568)]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 27% ] Capturing progress: 3:00:07 hrs remaining ]LOG]!><time="15:24:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 28% ] Capturing progress: 2:56:19 hrs remaining ]LOG]!><time="15:25:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 29% ] Capturing progress: 2:54:19 hrs remaining ]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 89 minutes (process ID 1568)]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 30% ] Capturing progress: 2:52:44 hrs remaining ]LOG]!><time="15:32:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 31% ] Capturing progress: 2:50:14 hrs remaining ]LOG]!><time="15:34:29.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 32% ] Capturing progress: 2:47:25 hrs remaining ]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 95 minutes (process ID 1568)]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 33% ] Capturing progress: 2:44:17 hrs remaining ]LOG]!><time="15:38:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 34% ] Capturing progress: 2:40:58 hrs remaining ]LOG]!><time="15:40:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 35% ] Capturing progress: 2:37:40 hrs remaining ]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 101 minutes (process ID 1568)]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 36% ] Capturing progress: 2:34:21 hrs remaining ]LOG]!><time="15:44:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 37% ] Capturing progress: 2:31:09 hrs remaining ]LOG]!><time="15:46:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 38% ] Capturing progress: 2:28:17 hrs remaining ]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 107 minutes (process ID 1568)]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 39% ] Capturing progress: 2:25:45 hrs remaining ]LOG]!><time="15:51:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 40% ] Capturing progress: 2:23:10 hrs remaining ]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 112 minutes (process ID 1568)]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 41% ] Capturing progress: 2:20:18 hrs remaining ]LOG]!><time="15:54:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 42% ] Capturing progress: 2:17:13 hrs remaining ]LOG]!><time="15:56:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 43% ] Capturing progress: 2:14:21 hrs remaining ]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 118 minutes (process ID 1568)]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 44% ] Capturing progress: 2:11:48 hrs remaining ]LOG]!><time="16:01:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 45% ] Capturing progress: 2:09:52 hrs remaining ]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 126 minutes (process ID 1568)]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 46% ] Capturing progress: 2:09:09 hrs remaining ]LOG]!><time="16:10:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 47% ] Capturing progress: 2:08:08 hrs remaining ]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 131 minutes (process ID 1568)]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 48% ] Capturing progress: 2:06:21 hrs remaining ]LOG]!><time="16:15:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 49% ] Capturing progress: 2:04:12 hrs remaining ]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 136 minutes (process ID 1568)]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 50% ] Capturing progress: 2:01:44 hrs remaining ]LOG]!><time="16:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 51% ] Capturing progress: 1:59:26 hrs remaining ]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 141 minutes (process ID 1568)]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 52% ] Capturing progress: 1:57:05 hrs remaining ]LOG]!><time="16:24:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 53% ] Capturing progress: 1:54:22 hrs remaining ]LOG]!><time="16:26:15.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 54% ] Capturing progress: 1:51:34 hrs remaining ]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 147 minutes (process ID 1568)]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 55% ] Capturing progress: 1:48:56 hrs remaining ]LOG]!><time="16:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 56% ] Capturing progress: 1:46:05 hrs remaining ]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 152 minutes (process ID 1568)]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 57% ] Capturing progress: 1:43:42 hrs remaining ]LOG]!><time="16:35:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 58% ] Capturing progress: 1:41:18 hrs remaining ]LOG]!><time="16:37:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 59% ] Capturing progress: 1:38:41 hrs remaining ]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 157 minutes (process ID 1568)]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 60% ] Capturing progress: 1:36:02 hrs remaining ]LOG]!><time="16:40:19.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 61% ] Capturing progress: 1:33:11 hrs remaining ]LOG]!><time="16:41:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 62% ] Capturing progress: 1:30:13 hrs remaining ]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 162 minutes (process ID 1568)]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 63% ] Capturing progress: 1:27:20 hrs remaining ]LOG]!><time="16:46:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 64% ] Capturing progress: 1:24:48 hrs remaining ]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 168 minutes (process ID 1568)]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 65% ] Capturing progress: 1:22:51 hrs remaining ]LOG]!><time="16:51:34.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 66% ] Capturing progress: 1:20:36 hrs remaining ]LOG]!><time="16:52:56.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 67% ] Capturing progress: 1:17:48 hrs remaining ]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 174 minutes (process ID 1568)]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 68% ] Capturing progress: 1:15:29 hrs remaining ]LOG]!><time="16:56:51.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 69% ] Capturing progress: 1:12:55 hrs remaining ]LOG]!><time="16:58:32.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 70% ] Capturing progress: 1:10:29 hrs remaining ]LOG]!><time="16:59:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 71% ] Capturing progress: 1:07:56 hrs remaining ]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 179 minutes (process ID 1568)]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 72% ] Capturing progress: 1:05:07 hrs remaining ]LOG]!><time="17:02:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 73% ] Capturing progress: 1:02:13 hrs remaining ]LOG]!><time="17:04:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 74% ] Capturing progress: 59:21 mins remaining ]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 186 minutes (process ID 1568)]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 75% ] Capturing progress: 57:19 mins remaining ]LOG]!><time="17:08:59.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 76% ] Capturing progress: 54:21 mins remaining ]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 191 minutes (process ID 1568)]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 77% ] Capturing progress: 52:42 mins remaining ]LOG]!><time="17:14:16.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 78% ] Capturing progress: 50:16 mins remaining ]LOG]!><time="17:16:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 79% ] Capturing progress: 48:22 mins remaining ]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 197 minutes (process ID 1568)]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 80% ] Capturing progress: 46:27 mins remaining ]LOG]!><time="17:18:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 81% ] Capturing progress: 44:11 mins remaining ]LOG]!><time="17:19:20.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 82% ] Capturing progress: 41:31 mins remaining ]LOG]!><time="17:20:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 83% ] Capturing progress: 38:07 mins remaining ]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 202 minutes (process ID 1568)]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 84% ] Capturing progress: 35:48 mins remaining ]LOG]!><time="17:26:06.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 85% ] Capturing progress: 33:25 mins remaining ]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 207 minutes (process ID 1568)]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 86% ] Capturing progress: 31:18 mins remaining ]LOG]!><time="17:30:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 87% ] Capturing progress: 29:37 mins remaining ]LOG]!><time="17:31:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 88% ] Capturing progress: 27:55 mins remaining ]LOG]!><time="17:32:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 89% ] Capturing progress: 25:04 mins remaining ]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 213 minutes (process ID 1568)]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 90% ] Capturing progress: 22:52 mins remaining ]LOG]!><time="17:35:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 91% ] Capturing progress: 20:47 mins remaining ]LOG]!><time="17:36:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 92% ] Capturing progress: 18:33 mins remaining ]LOG]!><time="17:37:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 93% ] Capturing progress: 16:14 mins remaining ]LOG]!><time="17:38:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 94% ] Capturing progress: 13:54 mins remaining ]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 218 minutes (process ID 1568)]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 224 minutes (process ID 1568)]LOG]!><time="17:45:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Return code from command = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Error creating an image of drive C:, rc = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
<![LOG[ZTIBackup COMPLETED. Return Value = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = -1073741819 0xC0000005]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread=""
file="ZTIBackup">Not sure what's going on here. Possibly a corrupt drive? Or the target drive is full?
Try running the imagex command manually from a F8 cmd window (in WinPE)
"\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
How to upload Excel file in BI using function module in abap program
How to upload Excel file in BI using function module in abap program?
Hi Anuj,
To upload the file , you can try a standard program "RSEPSFTP" .
while you execute the program , a selection screen appears in which the inputs should be give as
RFC destination - The target server name
FTP command- PUT
local file - your file name
local directory - path of your local file
remote file - your target file name
remote directory - where it has to be stored
Hope this is useful for you
Thanks & regards
Anju -
How to maintain Ztable using function module instead of SM30
Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'S'
VIEW_NAME = 'Table Name'
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
OTHERS = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
Error in Data selection in R/3 Generic Extraction Using function Modules
Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know itHi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea. -
Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
RaviHi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query -
Using Text module in report programs
Hi All,
Is it possible to use Text modules created in Smartforms in our report programs. if yes, please share some details on the same.
Regards,
Booma Ganesani am giving you a test data for READ_TEXT.
pass as per your requirements.
Function module READ_TEXT
Import parameters Value
CLIENT 400
ID F29
LANGUAGE EN
NAME 320000128500003
OBJECT EKPO
Export parameters Value
HEADER EKPO 320000128500003 F29 EN
Tables Value
LINES 0 Entries
Result: 1 Entry -
Error while using PayloadZipBean module
hi,
For sending the data in zipped format in JDBC Adapter i used "PayloadZipBean" module.
While Communication channel Monitoring at Receiver end I am getting this Error:--
"Message processing failed. Cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at loacalejbs, the whole lookup name is localejbs/loacalejbs/AF_Modules/PayloadZipbean."**
Is there any need to write this module in adapter engine?Hi,
Have a Look at these
Working with the PayloadZipBean module of the XI Adapter Framework
Zip-Transfer-Unzip: Increase the performance of your Java-ABAP applications
Regards
Seshagiri -
Zip Payload using PayloadZipBean Module Processor
Hi,
I'm using AF_Modules/PayloadZipBean in module processor of Receiver SOAP adapter to compress/zip the message payload. I've used the following module key parameters :
Parameter Name Parameter Value
zip.Mode zipAll
zip.filenameKey contentType
In the adapter engine monitoring from RWB I can see the following warning message :
Warning Zip: message is empty or has no payload
But I can see the msg payload from the RWB message monitor as expected.
Can anyone please throw any light on this issue?
Thanks in advance,
DipankarHi Stefan,
Can you please explain what you meant by transfer-encoding gzip?
Actually the requirement is to receive xml message in compressed zipped format along with digital signature. As I understand using the ModuleProcessor which you mentioned in your blog I can send zipped message (using File Adapter I've actually achieved the result as mentioned in your blog. So thanks a lot for that!). But in file adapter I can't use digital signature. So how to satisfy both the requirements using a single adapter (and maybe using some module processors over it)?
Thanks for your help!
Dipankar
Maybe you are looking for
-
Source works fine, EXE gives no memory error
I have finished my program and am now trying to build the exe taht will run on the cliends workstation. The source has been well tested and does not throw any errors when running. Building the exe works fine but when running the exe I get an out of m
-
I am on MacBook running on OSX 10.6.8. When I'm typing an email, if I make a typo and try to delete it or backspace, all I get is a computer sound and it will not allow me to do anything. I have to close that page and start over completely. It will n
-
OT: Camcorder Recommendations $500-600 range
Hi all, Any one got any recommendations for a decent camcorder in the $500-600 range? Any make to stay clear of and why? Thanks B www.visit-the-coqui.com/home If you are thinking of a vacation to Puerto Rico
-
I want to buy a refurbished 'Macbook Pro' solely to use 'protools 8' on-nothing else!. I am being told there are only certain year Macbook Pro that will run this programme. I know I need 8gb, can anyone give me advice on what to buy/look for please?
-
.... and how I may use it to access the target computer? I ONLY get this from my home computer when I'm trying to screen share from the office. When I home, I can screen share from my laptop to this comptuer perfectly. Clicking on the 1st option l