Capturing quantity of logistic transactions in CO, apart from CO-PA
Hi,
Is there any way of capturing quantity of logistic transactions in CO, apart from CO-PA?
The whole idea is so that I could report it with Cost/Profit-Centers by Cost Elements with the purpose of reporting the quantity together with P&L Statement via CO Report Painter/Drill-Down Reports.
Regards,
Bernard
Hi
U can capture the quantities in CO documents. This can be done through the selection of recorded quantity check boxes in Cost center and Cost elemetns as well.
regafds,
satya
Similar Messages
-
How to Capture Addl. Info in the Timecard(HXT and HXC) apart from Hours?
We run Payroll and OTL. We need to configure the timecard for one of the payroll element (HXT and possibly the HXC) to capture additional information apart from Hours (Using and LOV).
To accomplish that, I've done the following steps as per the User Guide.
1. Created new Payroll Element(Hours x Rate) , linked
2. Added the element to Element Set
3. Created new Lookup
4. Created new input value to the element created above and attached above created lookup.
5. Ran Generate Flexfield and Mapping Information.
6. Queried OTL Information Types DFF and made sure that the element is present there.
7. Clicked on Enabled and Displayed check boxes to enable 'Hours' and 'New Input' and Compiled the FF
8. Created a Table Validation Value Set for the above Lookup
9. Added Alternate Name Mapping (I AM NOT SURE WHICH MAPPING COMPONENT TO USE??????)
10.Created an Alternate Name for this Value Set
11.In the Preference tree for Timekeeper Timecard Layout, added this alternate name as the Timekeeper Layout Item 2. Please note that "Timekeeper Layout Item 1" is the Payroll Element Set.
When I opened the HXT Timekeeper Entry in the OTL Super Timekeeper responsibility, it is giving the following error message:
APP-HXC-366338: The Setup of Timekeeper Preference is incomplete.
Ensure that the following are set correctly:
1. Timekeeper Misc Setup Items.
2. Timekeeper Layout Attributes.
3. Timekeeper Group is created.
4. Profile: OTL: Allow Change Group Timekeeper.
When I remove the alternate name from the Timekeeper Layout Item 2, In the Preference tree for Timekeeper Timecard Layout, it works fine and I am able to capture the Hours for the element.
My intention is to capture another input value in the Timecard apart from Hours for the new payroll element and bring that input value to the element entries.
Can someone help me on this?
Any help is greately appreciated.
Thank you.Hello,
Setting view options in Image Capture:
You can view images and other items from your digital camera in Image Capture. You can see the items in icon view or list view. In list view, you can see information about each item, such as the date it was created, its size, and the exposure. You can specify which information gets displayed.
Connect your digital camera, and click Download Some.
Choose View > as List.
Control-click any column header, and choose the columns you want to display.
Now, if you want, you can get iLife 06 and use iPhoto instead. You can set your default preferences so that either Image Capture or iPhoto launches when you connect your camera. But in iPhoto, once the images are downloaded to your Mac, you can see all the information in the bottom lefthand corner of the iPhoto window by simply selecting an image in your iPhoto library. It's so much more convenient then Image Capture. I use IC for scanning... that's about it.
If you need further assistance post back... and.. with Image Capture open, you can always click Help in the Menu top of your screen. If you don't find an answer there, just post here.
Carolyn -
Pbm in updating delivery quantity and picked quantity in VL03N transaction
HI all,
I m using the BAPI 'WS_DELIVERY_UPDATE_2' for changing the picked quantity in VL03N transaction.
But this BAPI is not changing the picked quantity. Instead it add the old quantity with the new quantity what i mentioned in the ITEM_DATA (VBPOK_TAB table) of this BAPI..
For example, if the delivery quantity is 3 and picked quantity is 3 for a material item,
I want to change both the quantity as 2. Is is possible to change both the quantities through BAPI?
Im using BAPI_OUTB_DELIVERY_CHANGE to update the delivery quantity as loong as the picked quantity is 0.
If both picked and delivery are same (for example, both are 2), then i need to change both the quantities (say 1).
So how can i update both the quantities?
If so, pls share the BAPI details for achieving this..
Regards,
Shanthinot answered
-
Quantity based discounts, apart from scales?
Hi,
Another question that I could not readily answer.
Apart from using "Scales" is there any other way of giving "Quantity" based discounts to a customer.
Just for the sake of clarity.
Normally, we would maintain scales and give the customer scaled based discounts, right?
Example:
001 -100 lets say 5% discount or 5 USD discount (whatever)
101 -150 lets say 6% discount or 6 USD discount (whatever)
151 -200 lets say 7% discount or 7 USD discount (whatever)
My question, is there a way other than above mentioned example(scales) of giving the customer a "Quantity" based discounts.
Thanks in advance,
Raj SAP SD_NewbieThe mentioned approach is the easiest way.
Other approaches would be,
1) manually adding discounts in the pricing procedure by the user when he/she process a sales order.
2) add a routine in alternative calculation type column against the discount condition type in the pricing procedure. The discounts details can be stored in a z-table and the routine can read the discount detail from this table.
Regards, -
Custom Transaction Data getting Transfer from R/3 to APO only through CFM3
Custom Transactional Data getting Transfer from R/3 to APO only through CFM3
Requirement :Automatic updation of Custom Transactional Data R/3 to APO Auto Transfer like Normal PO Changes Reflection
While working with Core Interface The Standard Transactional Data is getting updated to APO Directly for PO Qty Changes.
But I have written code in the R/3 User Exit to Calculate the Open Target Quantity and Transfer the Values to APO through the Structure .
It is Populating the values and updating in the ZTable of APO [User Exit] only when we activate and De-activate the Integration Model thru CFM3 Manually.
Could you advise and provide the info for solution if you have come across the same scenario .
Thanks in Advance.
With Regards,
Naveen Mutyapu.Hi All,
I have not received answer from the forum, but solution is without CFM3 also we can able to send data from R/3 to APO whenever we change the PO with populating the necessary values in the structure IT_OUTPUT_CUS..
Regards,
M N Kumar.
Edited by: MNKumar on Sep 14, 2010 8:23 AM -
Whats the Actual use of the Setup table apart from the Full/Init loads
Hi guru's
could u explain whats the Actual use of the Setup table apart from the Full/Init loads in Lo ExtractionHello Guru,
The Setup table is used mainly for storing the Historical data whereas the new and changed records will be maintained in the Update table.
By storing the Historical data in the setup table you don't need to disturb the Application table anymore.
Please go through the following blogs
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Hope it helps
Thanks,
Chandran -
CRM_DNO_MONITOR - way to customise display apart from 'change layout' ?
Hi friends,
In the transaction CRM_DNO_MONITOR, there is a standard screen offering a few selection parameters.
Based on what you choose, the next screen is displayed with all those relevant messages.
There is a "Change Layout Button" as with many SAP reports. One can choose to include a further fields to get displayed on the report screen.
My questions are:
(1) Is there a way to include more fields than suggested by the "Change Layout" dialog box? For instance, I was keen to know why the following fields were not offered for selection:
a) Support Team
b) Subject (field name - LISTCODE)
(2) Is there a way to easily include Z fields as part of the Support Message (standard Transaction Type SLFN) and use such Z fields in display ?
(3) Is there any other transaction, apart from CRM_DNO_MONITOR that offers even better control on filtering/ sorting messages ?
Any suggestions and workarounds would be gratefuly acknowedged.
Regards,
SriniDear Alagammai,
Thanks for your time.
Being a person who started from 3.1 days, yes DNOTIFWL was my first port of call
However, what I realised was that if you set a notification to 'Completed', it does not automatically set the Message Status to 'Confirmed'. Therefore, the status values as seen by Testers from within STWB_WORK does not reflect the updated position.
[This|https://websmp103.sap-ag.de/~sapdownload/011000358700001197002005E/Addtional_Information.pdf] document - once proposed by Raguraman C in reply to another member [thread |Notification Vs transaction type;also does not exactly answer the utility served by DNOTIFWL.
At the moment, ii is not an option I have since there is no ABAP talent meant to serve SolMan stream. i is inadequate and iii doesn't help either, unfortunately.
Thanks for your time though. If you ever find a better solution, please update in this thread.
Regards,
Srini
Format changed; Edited by: Srinivasan Radhakrishnan on Apr 24, 2008 1:31 PM -
I am not good with computers. I am trying to get my iTunes onto this new laptop but it says I am only allowed to have it on 5 computers and I must take it off one to ut it on this new laptop. Problem is, apart from my iPad, I have lost one laptop and two have been broken beyond repair so I am unable to take it off! Anyone any ideas? I have tried to get iTunes support but cant get past the "date of purchase" as I can only guess when I bought my ipod (2009)
Hang on...
You can only authorise the songs you purchase from the iTunes Store to play on five computers.
You can download and install iTunes (the iTunes programme) onto as many computers as you wish.
Two different things.
Assuming therefore, that your problem is that you have authorised five computers, but now no longer have some of them, you need to de-authorise all your computers and then re-authorise the computers you still have.
To de-authorise your computers, go to your account in the iTunes Store and look for the Deauthorise All button. -
Hello, I hope someone can help me.
I pre-ordered Justin Timberlake's new album and have tried to download the album today, however for some reason "Suit & Tie" is listed as unpurchased and will charge me 99p to download?
All the other tracks have downloaded fine apart from this one.
A couple of things I should mention in case they affect this issue:
I am trying to download it directly to my iPhone - I have not loaded up iTunes on my PC as of yet.
I already have the song "Suit & Tie" as a single.
Will iTunes realise I technically already have the song so charge me less and just give me the remainder of the album?We are having this same issue. We have over 200 songs that are now missing and only our most recent ones show up in our ITunes library. Fortunately we have one phone that still has all of our music still in tact. This phone is no longer one I will be using as I upgraded to the Iphone 6, and only the most recent purchased songs remain. The rest are no where to be found and the iTunes store shows that I would need to re-purchase. Not sure what to do as when I tried to sync my last phone, all the songs were gone.
-
Is it possible to call custom designed RFC function module, apart from BAPI
Hi Friends,
1. Is it possible to call custom designed RFC function module, apart from BAPI.
2. Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why cant be dynamic.
Thanx for Ur time.
Cheers,
SamAlso check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
Regards,
Christophe -
how do I keep my music on itunes apart from my kids? everytime I connect my ipod to my computer I end up with a lot of apps and all thier songs on my iphone.
Do you mean you all have different AppleIDs? But, do you also have different user accounts on the computer?
Simplest thing is just give everyone their own user account on the computer - they log into their account and sync their devices from only their account. Keeps everything separate and neat. -
after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton -
Transaction CO Through-postings from FI has been locked Error on Assets
Hallo,
We are on ECC 6.0 EHP5 SRM 5.0 EHP1 SAPKIBKT18
We have the following problem. When we want to confirm in SRM PO's which are booked on an Asset the following error occurs:
System status INCM is active (Confirmation 187950)
Transaction CO Through-postings from FI has been locked (Item 1)
We don't have the error when confirming a Purchase order created on a Cost Center or WBS Element and it only occurs in our productive system. We have checked the following
CO through posting open and/or locked and they are ok (Confirmation on Cost Center and WBS Element works so it should be)
The master data of the PO. Can't see anything there
Master data of the Assets
Autoriation of users who are logged in and the RFC users
We cannot seem to find the problem maybe some of you have encountered this ?
Thanks!Hi,
Please see below for more inputs
http://forums.sdn.sap.com/thread.jspa?messageID=5330802#5330802
http://forums.sdn.sap.com/thread.jspa?messageID=8874880#8874880
http://forums.sdn.sap.com/thread.jspa?messageID=8646493#8646493
Regards,
Nikhil -
All my music in my itunes library has vanished apart from the purchased items! It is not in the music > itunes > itunes media folder, I've searched the entire system for mp3 and nothing. Why has this happened and where has it all gone?
http://support.apple.com/kb/HT1329
-
How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone 3gs without erasibng everything. i need help!!!
Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
Maybe you are looking for
-
Hierarchy leaves have different InfoObject name than the value
Hi, I am working on an hierarchy and loaded data to BW. I noticed that when I expanded the tree, the right side of the leaves saids 0COSTCENTER but the left hand side of the leaves has the department values. Would this be a prolem for reporting or an
-
Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.
-
Hello, please help me to solve a problem. I need you to check my XI design and configuration. I confused at all. I have a task to send an information from MSSQL DB to SAP.This information is based on query to the DB. At first we must be sure the inf
-
Movie download is overloading my system
I have a Dell Dimension 8300 with a Pentium 4 CPU, a gig of RAM and plenty of disk space, BUT.... when I bought the 5th season of 24 (as a lump purchase), iTunes insists on downloading THREE of those half-gig episodes at once! Even my cable connectio
-
Original song files could not be found or located
Hi, I just went to play some music in my iTunes library and nothing would play. Many songs have little exclamation marks next to the numbers along the left-hand column. When I click on songs without exclamation points they don't play either. Each tim