Capturing Statistical Internal Order through Sales Order

Hi all,
Could you please let me know if we can capture Statistical Internal Order through a Sales Order for revenues?
Thanks & Regards,
Sajan

Hi Sajan,
Yes. You can assign the Statistical Internal Order in the assignment tap. Since I do not have SAP System in front of me. You can take the help of SD Consultant to locate the field in Sales Order.
Trust this resolve your problem,
Cheers,

Similar Messages

Settlement rule for SO through sales order

Hi,
In my scenario,service order is being created through sales order.Earlier we used to have default settlement rule for the service order as Profiltability segment.Now we have changed as SD1-Sales document in the settlement profile.
Now If I create service order through sales order,in the service order settlement rule is not getting created and If I gone through IW32,its asking for With Default/Without Default.If I select with default,now its picking up the rule automatically.
why rule is not getting created during creation itself .
I though that in the sales order,first service order is getting created and at that time sales order number is not available and hence settlementy rule is not getting populated.
Is it right?
Regards
KRISHNAN

Hi Pete,
The system status is CRTD MANC NMAT PRC.
People are suggesting that we can able to populate the settlement rule as SDI(Sales document Item) during creation of service order through sales order.(Also adding the point that after creation of sales order only service order is created with details of Sales document number in the order header)
In that case why in my case its not pouplating?
Regards
KRISHNAN

Third Party Process (PR through Sales Order)

Hi all,
I have to configure the third party scenario (PR through Sales order) for one of my client.
So can anybody tell me what are all pre-requisite / settings from the configuration point of view as well as from the transaction point of view.
Thanks
Shubham

Hi,
here is some stuff regarding third party purchasing,
may be it will use ful,
u2022     The item category group (BANS) in the sales:sales org.data screen of the material master controls whether or not the material will always be a third party material. In this case, the item category in the sales order will be defaulted to u201CTAS.u201D   If the material is also procured internally, then the item category group can be set to u201CNORM,u201D and the material can still be used for third-party processing if desired.
u2022     The item category in the sales order (TAS) informs the system that      procurement data must be maintained for the order. In addition, this item category results in a purchase requisition being automatically created with its item   category defaulted (S).
u2022     The purchase requisition is created as a result of a sales order. For each schedule line (quantities for sales orders broken up by dates of delivery), a purchase requisition item is created, provided that the item category on the
sales order is u201CTASu201D for third-party. The purchase requisitions created can
be viewed and even edited from the schedule line screen (Edit-
Procurement Details).
u2022     Changes in quantities, dates and account assignments in the purchase order result in the automatic changing of the sales order.
u2022     A desired vendor (informational field) can be specified in the sales order in the procurement data for the order. In addition, a fixed vendor may be assigned in this data if known at the time of the sales order. This then becomes the supplier for the third-party items. If the vendor is not specified in the sales order, the purchase requisition goes through the normal source determination.
u2022     The account assignment in the purchase requisition can be either the sales order (C), or aux. account assignments (X).
u2022     Once created, the third-party purchase requisition follows normal
purchasing procedures.
u2022     Customer delivery information is copied onto the purchase requisition from the sales procurement data.
u2022     If you create delivery schedules or change quantities during the purchasing process, these automatically get copied back to the schedule lines on the
sales order.
The goods receipt indicator can be found in the purchase requisition which can be edited from the sales order (Click on Item line- Hit Schedule Lines button -Hit Purchase Requisition Button). This indicator determines whether or not the customeru2019s goods receipts are monitored. When the indicator is off, invoice verification is done against the purchase order quantity, and the delivery of goods to the customer is not input into the system
chenna
Edited by: lakshmi reddy on Oct 6, 2010 2:23 PM

Internal copy of sales order (ZORI) is printing on printer

Internal copy of sales order (ZORI) is printing on printer each time a credit block is released for only 1 user regarding the ZORI. The printing has started automatically about a year ago. Her colleagues don't get the printout when they release credit block.
Actually,when the credit block is released thru VKM3, the print does not triggered automatically for released blocked order.
But only one user always gets print out, which should not be happened.
can anybody help me out??

Can u explain in a more details about the issue.
As per my understanding there are a couple of users who are having ZORI type assigned
to thier partner function ,However only one user gets print al times .
And others don't.
If this is so then cross check with the abaper through debugging what actions are happening when
a credit block is released and i am sure there may be some hardcoding which is making this happen.
THanks
M.Naveen Kumar

Service Order Creation through Sales Order...

Hello,
I got one requirement it is , we need to copy the account assignment (WBS element ) from sales order line item to service order line item . Morever same wbs element should be used to create automatic settlement rule in service order.
This should also work even if user changes the WBS element later. i.e, updated WBS element should again update service order and settlement rule automatically.
I tried to use Exit MV45AFZB and routine USEREXIT_MOVE_FIELD_TO_COBL, but still i am not able to see the data in service order Location tab, Object tab.
I checked the table ILOA, its not getting updated when creating Service order via sales order.
I am not able to see any fields value coming on Service order screen when creating through sales order.
Regards,
Sujeet Mishra

Hi ARC,
Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
Runtime Error UNCAUGHT_EXCEPTION
Except. CX_SOAP_CORE
Date and Time 07.05.2008 20:13:24
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
be terminated

Results analysis data is calculated through sales order

Hi All,
I m trying to calculate WIP of one process Order through KKAX. But I am getting the below error
Results analysis data is calculated through sales order 300002423 001000
Message no. KJ112
Diagnosis
The order you selected for WIP calculation or results analysis is assigned to a sales order. A results analysis key was entered for this sales order.
System Response
The system determines results analysis data for orders assigned to sales order items through the results analysis for the sales order.
Procedure
Carry out results analyis on sales order 300002423 001000.
This process Order is related to Sales Order and I have checked the Result Analysis key is attached to Sales Order.
Please help me out in this issue.
Thanks!
Regards,
Vivek

Hi,
I was getting the above error because a RA key was selected ar Sales Order, Now what I have done is I have removed the RA Key from Sales Order, there is already a RA key attached to Process Order. Now When i am calculating KKAX (WIP) I am getting below message
The order is not a WIP element
Message no. KJ148
I have done this because my client is not using KKA3(RA fro Sales Order)
Please help!!!!!!!!!
Thanks!
Regards,
Vivek Srivastava

Auto PO through Sales Order

Hi,
    I am MM Consultant, we could able to generate an auto PR through Sales Order,,, my client wants to generate an auto PO through Sales Order without PR intervention. is it possible? if so how to do it,,
want to know the settings to be done in SD for Auto PO generation w.r.t. Sales Order, plz guide me
regards,
urendra

Hi,,
    the following are the steps i followed:
1. Created my own Sales doc type = ZCHK and assigned numbe range to it
2. Item Category TAS has been selected, Item Category Group TAS1 has been created.
3. for material type HAWA- assigned Item Category Group TAS1
4. Created a material master S1 with Gent item category - TAS
5. Created a Purchase info record for material S1, Vendor 400055, Pur Org -EPD, net price = 100
6. In Assign Item Categories
    Sales Doc type-Item Cat Gr-Usage--Hl item cat--Def it cat- Manual It cat
        ZCHK----
TAS1    -
TAS -
ZSTK
7. Created SO using t_code VA01, SO 4000804 created, and I noticed that a Purchase Requisition was generated,,where as I require to generate a Purchase Order directly without intervention of Purchase Requisition.
    (Usage--- i have not selected & assigned any usage,,, will it make any difference),
    plz help me out,,, its urgent,
regards,
urendra

Production order changes through sales order

Mine is a MTO business process. I am using strategy 50. when ever I create a production order from the planned order its getting attached to the sales order which is expected and obivous. when ever the sales order gets rescheduled its also re scheduling production orders. this is also expeceted. this rescheduling thing is happening even after I release the order until some cost is incurred on the order( until the first confirmation is done). this is causing the proble. so whats happeing is we release the production order Print it. we have a wait time of approx 30 to 40 after we print and we start manufacturing. in this mean time when something changes in the sales order even the credit card info the sales order. the sales order trys to perform a mateerial availability check which is rescheduling the production order and placing it back from released status to created status. this is causing the problem.

Try this.
1. Create a Status profile in bs02.
2. you can use the standard profile PP000001 Status profile ProductionOrder
3. Assign this profile as header for your production order type in OPJH.
4. Now when you create and release thep roduction order the - Release status would be set by the system
5. AFter you have release manullay select the status profile in the prod order header and mark the RLLK Release locked
6. So next time without deactiviting this check mark in the status profile you wil not able to release the order
so kindly check this option and let me know for clarfications
reg
Dsk

Settlement of Sale Order to Sale Order

Dear experts
I need help in the following scenario:
At my client place we are doing job work for external material. All the material are supplied by the customer and our client will do the processing and send it back to customer's customer on customers request.
To create Excise Invoice against the Customers Customer we are handling through 2 sale orders.
First One Sale order will be created against the Customer Order and Sale price will be the selling price of Customers to Customer.
Second Sale Order will be created for Job Work Charges for the processing the materials.
On settling the process orders all the cost is settling to Sale Order One, Clients revenue is coming from Sale Order Two.
Here I need to settle the First Sale Order to Second Sale Order. I have given the second sale Order number in first sale order number in Settlement rule.
But when I settle the First sale Order all the amount it going to Price Differance Account.
How to settle the Cost of First Sale Order to Second Sale Order?
Regards
Kiran A

Dear Experts
any advises.
Can I go for Sale Order to Sale Order Settlement ?
Regards
Kiran

Preli cost compo struc of production orders to sales orders -Non valuated

Hi experts
We use Non valuated sales order cost/settlement and assembly order processing. So production order is created from sales order and prel cost estimate is created in the production order. Now we notice that the cost component struc in production order is not copied into sales order. Only the EK02 is copied with total cost.
How to bring cost compo struc from production order to sales order ?
This may be a special cost estimate with costing and Is it possible to bring cost compo struc to copa record type A or F.
I know standard cost compo mapping in copa but I could not see the costing variant used in production order in copa master data configuration.
regards
KT

If the sales order is not a cost object, you cannot cost in it, and you can therefor also not see the cost component split.
When you sell the material, you can pull through the cost component to PA, via the material master using the COPA valuation strategy. However, only the info for the material in the sales doc line item.
You don't link to a costing variant, you link using the above valuation strategy and the costing key. The costing variant sits inside the costing key.

MTO(Diff between complex make to order and sales order based mass prod)

Hi
We are using MTO...Can anyone tell me what is the Diff between complex make to order and sales order based mass prod in finance perspective?

Hi,
In the case of complex make to order scenario, through MRP, the Project shall be assigned to the sales order. Then there will be milestone billling and all. In the case of mass production MTO, it is only creation of production order for each sales order item and each sales order item shall have sales order cost estimate.
Trust this helps much and do encourage our efforts!
Cheers!
Edited by: Ashok Singh on Oct 28, 2008 6:53 PM

Lean Order Functionality - Sales Order Create

Hi Gurus,
Can anyone please confirm Service ECC_SalesOrderCrtRC1 or ECC_SALESORDERERPCRTRC2 creates a sales order through Lean Order Functionality.
My requirement was like sales order should be created through Lean Order Functionality. We are in the Dilemma whether to use the web service or use Some other FM like SLS_LORD_MAINTAIN.
Thanks in Advance

Hi Gurus,
Can anyone please confirm Service ECC_SalesOrderCrtRC1 or ECC_SALESORDERERPCRTRC2 creates a sales order through Lean Order Functionality.
My requirement was like sales order should be created through Lean Order Functionality. We are in the Dilemma whether to use the web service or use Some other FM like SLS_LORD_MAINTAIN.
Thanks in Advance

Production order from sales order

Hi experts,
I have created production order from sales order through t-code co07, there it shows error "Sales order has no CO object" like this.. how to resolve this.
Thanks

Hi,
KA01 configuration is must for CO object And OKB9 config where we configured the Cost Element to Cost Center basing on the profit center as we have the Automatic Acct Assignment.
Please try and come back.
Regards,
R.Brahmankar

Purchase order and sales order table name

hi al,
i want to know purchase order and sales order table name in abap.
thanks
varun
Moderator message: please do some own research, this should not take too long.
Edited by: Thomas Zloch on Jan 27, 2012

Hi Sunrag......
If your PO is linked with SO. Then you can fetch customer name easily by FMS in PO.
From there you ca gte the Customer Name into your PLD and it wont hang also.....
Regards,
Rahul

Fields required for linking production order with sales order

I need to link production order and sales order to get the part no#. need to see in md04.

The link between production order and sales order can be made by using the KDAUF KDPOS fields of AUFK or AFPO and linking them to VBELN and POSNR of VBAP.
Regards,
Rich Heilman

Capturing Statistical Internal Order through Sales Order

Similar Messages

Maybe you are looking for