Capturing the Unknown

A client has brought me mini dv tapes that were shot on a inexpensive consumer Sony camera of some type. This client does not know any more about the camera than, it was a Sony Handi Cam about 2-3 years old. I can play the tapes on my Canon XHA1. The intention of these tapes is to use them to make a DVD. They are in a 4 x 3 aspect ratio and of course no time code on the tapes. I have downloaded a couple of minutes of tape but all the clips run togeather into one. I also get a warning that
the audio and video are not in sync, or something to that effect.
What settings, Audio/Video, Easy Setup would be recommended. Do I need to change any System Settings or User Preferences settings for editing in SD? I am relatively new to FCP and have never done any SD editing in FCP. Did plenty in iMovie.
Thank you
Kent

In QuickTime Player go to File > Export > Movie To QuickTime Movie > Options.
In Options, choose the DV codec and make sure audio is set to 48kHz.
You probably have a bunch of clips though, right?
If you use Compressor, they can all be done in one batch. If Compressor is too complex, MPEG Streamclip will do the job, it is free and simple to use: [MPEG Streamclip download link and tutorial here|http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0].
Is there any way that I can automatically create a new clip when the scene changes?
Normally yes. You can use DV Start/Stop detect (details in the manual). But you said in your original post that there is no timecode, if that's the case, it won't work.
When you have intact timecode, you should use Log and Capture. Go through your tape, mark in and out then click on Batch. Repeat until you have all the clips that you need.
This will make a list of clips in the Browser. Select all, right click one of them and choose Batch Capture. FCP will then roll the tape and grab them.

Similar Messages

Capture the command executed by Eclipse

I have a Hibernate appps. It runs on Eclipse IDE (in class files format), it works fine. But when I packages it to jar file, and run it using command prompt, it hit error.
+{color:#0000ff}java.lang.NoClassDefFoundError: org/hibernate/Session+
at com.flextronics.fftester.Client.main(Client.java:103)
Caused by: java.lang.ClassNotFoundException: org.hibernate.Session
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
+... 1 more{color}+
My question is, how to capture the command executed by Eclipse, so that I cna re-use it on command prompt?

Hi DrLaszloJamf , thanks and trying. One quick question: Can i specify path name instead of particular jar filename, from a simple test, I found the hibernate library path does not work. I need to specify the jar file, then only it works.
You specify classes to include in the Class-Path header field in the manifest file of an applet or application. The Class-Path header takes the following form:
Class-Path: jar1-name jar2-name directory-name/jar3-name.And If this one is true, that mean either we can use classpath externally or embedded in manifest, right?
By using the Class-Path header in the manifest, you can avoid having to specify a long -classpath flag when invoking Java to run the your application.Edited by: gkheng on Jul 21, 2008 7:42 PM

Unable to capture the parameter values from a PL/SQL procedure

hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
     rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
     dbms_output.put_line('The error is ' ||err_cd);
     dbms_output.put_line('The error is ' ||err_txt);
     dbms_output.put_line('The cntr is ' ||cntr_var);
     for incr in 1 .. OUT_SIGN_TAB.count
     loop
     cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............

We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2    err_cd varchar2(1000);
3    err_txt VARCHAR2(5000);
4    no_of_recs number;
5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6    cntr_var number:=0;
7 begin
8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9    dbms_output.put_line('The error is ' ||err_cd);
10    dbms_output.put_line('The error is ' ||err_txt);
11    dbms_output.put_line('The cntr is ' ||cntr_var);
12    for incr in 1 .. OUT_SIGN_TAB.count
13    loop
14      cntr_var := cntr_var + 1 ;
15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16    end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob.

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture the excise duties for intra stocktransfer

Dear All,
while doing goods receipt aganist outbound delivery in receiving plant for intracompany(Depo to Depo) unable to capture the excise duties.Please help on this.
Thanks & regards,
Bhargav

Hi Prabhu,
Excise duties are are not picking automatically while doing j1ig
Thanks & Regards,
Vijaybhaskar

Unable to capture the D4OSESSION during LOAD testing??

Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
Nats

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture the Idle time for BSP page

Hi Experts,
I want to capture the Idle time of my BSP page. If that is 5 mins then i have to display the pop up displaying the remaining time.
Please let me know how to capture the IDLE TIME. not the time after the page is loaded.
Any suggestion will be helpful.
Aready checked in SDN but unable to get the solution so posting it.
Thanks in advance.
Sravanthi.V

hi,
After capturing the idle time iam giving the warning popup to user before 5mins of expiry.Now my requirement is if the user clicks on OK button of popup the page should get refresh. i.e.Idle time should of system should break and we have to get one more hour for expiry.
Thanks in advance,
Sravanthi.V

UCM workflow: Unable to capture the reject event.

Hi guys,
We are using UCM 11.1.1.5
We want to customize our workflow with 3 stages. If a particular user rejects the workflow, we want to display a error message and abort the reject action.
hence we wrote under the Entry event of the previous stage as follows
<$if wfAction like "REJECT"$>
<$abortToErrorPage("Sorry you cannot reject this stage.")$>
<$endif$>
But we found that the script was not triggered when a user clicks on Reject button. Is there anyway we can capture the Reject Action?
Is it a bug in UCM 11.1.1.5? Anybody faced similar problem.
Please help us
THanks & Regards
Jacob

hi,
Unfortunately I don't have the solution as I also am facing the same issue. You can also follow my thread here at the forum. Search for "workflow issue using wfAction" here at the forum.
Have you tried to run the test under the Test tab and what results do you get?
cheers,
Ibrahim

Unable to capture the value of vbrk-vbeln value from VF02

Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
john

Hi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu

To capture the Mini-DV file through the 1394 firewire card from t

hii there!
first let mi make you understand what we people are doing ....
We people want to capture the Mini-DV file directly through the 1394 firewire card from the sony camcorder in to the MPEG2
format. Thent on the fly(i.e.during capturing into MPEG2) we also want to capture the metadata i.e (time,date etc. of the
original shooting event) into some text file. Our MPEG2 format requirements are: 8mbps viedeo,freq-48KHz,16 bit sterio,384
audio kbps, Deinterlace... we are using JavaMediaFramework-2.1.1e(Java Media Studio tool)..so we want to explore that tool
much more coz rightnow it's not supporting MPEG2(only supporting MPEG1) and also not supporting 1394 cpture card ...we want
the codec for converting DV-AVI to MPEG2 with date and time exctrated and much more explored details about JMf2.1.1 JavaMedia
Studio to get more familiar.....
for the above mentioned problem I am trying to add the mpeg2 codec inthe plugin of the jmf studio..and i have followed the
steps ..
Download the Codec from IBM
Extracted jmf.jar
Extracted codec.zip
Added files from codec folder to jmf folder
Made a jar out of it and name it jmf.jar
Replaced that with current jmf.jar (kept a backup)
Opened JMFRegistry and in "Plugins","Codec" and now unable to add " "
this becoz i am not knowing the exact way of recopiling that newly created jar file and because of that that mpeg-2 codedc is
not get added .....so i am looking forward for any help for the above mentioned problem!
I would be gratefull on getting ur help coz it's such challenging and techy concept to explore...
thanks..
nilesh hardikar
contact: [email protected]

I understand your pain. See BUG ID 4640032: JMF does not support DSVD encoding
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4640032
Add your vote, maye Sun will hear!

How To Capture The Inputs given for a Filter Defined at Universe Level

Hi ,
I have a conditional filter defined at Universe level
Wen this is used for Running Query using web Intelligence, It is asking for a prompt. That is cool and fine
Now my Question is that , I was unable to capture the prompt value being passed while running the Query .
For this object I am passing the values at universe Designer(3.1 SP5)
I would like to capture those prompts, I am not getting the same when I use UserResponse Function
Please Help me on this
Thanks in Advance

Hi
To capture the prompts values entered at query run time.
=UserResponse( "Prompt Text") Like ("Enter Values for Sales ID")
Will give the prompt entered value.
=PromptSummary()
Will give the list of prompts entered at Query run time.
Pleaas find the below link.
http://bobjblog.wordpress.com/tag/userresponse/
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_ffc_en.pdf

Camera - Torch 9800 - Unable to capture the image

Hey everyone!
Had a torch 9800 for 18 months now and always been working fine... until today.
I went to use the camera and it all seemed to open up fine but instead of seeing what the lens sees the screen was black. The centre focus [ ] was there and I could zoom back and forth just a black screen.
When I click for a photo I get a message " Unable to capture the image "
I have searched the web and found nothing conclusive. Battery pulls, a full wipe and installation of the o/s have made no difference to it's lack of function.
Does anyone out there have a suggestion?

I am having the exact same issue. I also tried rebooting, taking out the battery and sim card and cleaning out the back, alas no difference.

Reg: How to capture the Excise Invoice with respect to Inbound delivery

Hi All,
Please give the process follow for capturing the excise invoice with respect to inbound delivery.
Thanks & Regards
Siva

Hi Siva,
Please check this link
CIN with Example..?
Regards,
Bijoy Kumar

Capturing the Unknown

Similar Messages

Maybe you are looking for