Capturing through Sony HDV using firewire800 to 400 adaptor is not recognizing can any body help me solve this

I am trying to capture using firewire 800 to 400 adaptor through a Sony HDV VTR. The VTR is not recognizing can some body help me solve this problem.
I am using FCP7 and IMAC with 10.6.8 version os
I dont have a 6 pin or 400 firewire port in the system

Let's start with basics.
Does your computer recognize that there is a VTR attached?
• Open up system profiler>Hardware>FireWire. Does your machine show up?
If no, you need to figure out if the problem lies with the VTR, the cable, the adapter or your computer.
My guess is with the adapter. A number of people have expressed frustration getting fw400 device to work through fw800 ports.
If that's your problem, see if you can find an older Mac w/ fw400 ports or a dedicated fw800 to 400 cable.
good luck,
x
ps - In "locking the barn after the paddle has been lost upstream" mode, this is why non-expandable computers like the iMac are so problematic. A MacBookPro with the expresscard 34 slot or a MacPro with 3 slots can work around these kind of issues. A closed box like the iMac is a dead end. Sorry.

Similar Messages

HT204302 i get a message when I plug in my ipod to my laptop saying "cannot use this ipod because apple mobile device is not started" can any one help me with this...I have never had this happen before

Hello anyone
I get a message when i plug in my ipod touch saying "cannot use this ipod because apple mobile service is not started" can anyone please help me with this problem...I had this message once before but I forgot how to correct it

From the More Like This section on the right:
I get error message when I plug in iPhone 4s saying "This iPhone cannot be used because the Apple Mobile Device service is not started"
can't get my ipod to connect to tunes error message "cannot be used because the apple mobile device service is not started" fixes? Using Win XP
im trying to connect my ipod to itunes and its saying it cannot connect because the "Apple Mobile Device is not started" help
Or see: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not.

TS1538 hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....pleas

hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help

https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

Can any body help me in creating a jar using Weblogic server tool

I have created the class files of the container manged bean successfully.I want to create the jar file using the weblogic tool.
I have created a new jar file and now I have to add a bean class file and a home class file to it.In the tool I choose a the path using the choose button.When I say next it complaints that it cannot locate the bean files.
Can any body please help me soon..
waiting for your reply.

I had similar problems with the WLS deploy tool. I think they were solved by making sure that I started the tool from the directory that contained the root package of my EJBs.
It might work...

HT4436 When ever I try to log into I Cloud it rejects my Apple ID I have changed it several times but all to no avail. Strangely I can use my ID to buy Itunes music. Can any one help please?

Can anyone help? I am unable to log into ICloud. When I type in my ID and password it comes back with 'incorrect password' I have changed the password several times but it doesn't help. strangely i can use my paswod to buy buy Itunes music but not for Icloud. Any suggestions would be gratefully recieved.

Hello CarenzaRielle,
I know not being able to access your Apple ID can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Refer to the Apple ID Support page if you are unable to reset your password using the steps in this article. If you know your Apple ID password, you can also choose to change your Apple ID or change your password.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can any body help patches applying through powershell?

Hi,
Is there any posibility to apply patches automatically on servers by using powershell?
In my Environment having vbscript is using for applying patches to servers with notification E-Mail to respective DL.
I'm planing to change script language from VBscript to Powershell.
anybody have any idea about this?

We are not installing patches through WSUS. In share path all the patches will be placed and that share path will be mapped to respective server. some VBscript files are there that are interlinked with .bat file once runs the .bat file automatically files
should be download to respective server then automatically installed patches and reboot will happen after that get a mail notification to respective DL.
This is procedure happening in my environment. My plan is to change VBScript to Powershell.

HT1212 My home button is disabled and I am using assitive touch, I now need to reboot my phone as it has frozen. Can any body help

I've been using asstive touch because my home button doesn't work. My phone froze and I can't reboot. The sim was also removed so I can't see the screen to add a passcode. I know the phone is still working as when you turn the speaker off it still vibrates.
Can anybody help?
HirdyOne

With a non-functioning home button, the only thing you can do is allow the battery to die and then connect the device to the charger. This should restart it, unless something else is going on. In that case, without a functioning home button, there is nothing else you can do.
I'm not sure why you think that removing the SIM card would have any bearing on being able to see the screen, but that is not the case. The screen is not connected to the SIM.

Hello can any body help me to add color to my shape using jcombobox

please how can i fill color to my shape and change the line color of my shape using jcombobox here is my code
//package paint;
* PaintShapesDemo.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class PaintShapesDemo extends JFrame implements ActionListener
final private int RECT =1 ;
final private int CIRCLE = 2;
final private int POLY = 3 ;
final private int ELLI = 4 ;
final private int TRAN = 5 ;
private int shape;
JLabel Lcolor;
JLabel Fcolor;
JLabel headlebel,linecolorlabel,fillcolorlabel,labeldisplay;
JButton recbutton,cirbutton,polygonbutton,ellipsebutton;
JComboBox linecolor,fillcolor;
private ButtonGroup grShapes = new ButtonGroup();
private JPanel shapeSelectionPanel = new JPanel(new FlowLayout());
public PaintShapesDemo()
super("HAKIMADE");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setBackground(Color.white);
setSize(800,600);
setLocationRelativeTo(null);
recbutton = new JButton("CIRCLE");
cirbutton = new JButton("ROUNDRECT");
polygonbutton = new JButton("ELLIPSE");
ellipsebutton = new JButton("RECTANGLE");
JPanel TP=new JPanel();
TP.setLayout(new FlowLayout(FlowLayout.CENTER));
TP.add(new JLabel("MY PAINT APPLICATION."));
JPanel panel1=new JPanel();
panel1.setLayout(new FlowLayout(FlowLayout.CENTER,10,40));
panel1.add(recbutton);
panel1.add(cirbutton);
panel1.add(polygonbutton);
panel1.add(ellipsebutton);
JPanel TP1=new JPanel();
TP1.setLayout(new BorderLayout());
TP1.add(TP,BorderLayout.NORTH);
TP1.add(panel1,BorderLayout.CENTER);
JPanel panel2=new JPanel();
panel2.setLayout(new FlowLayout(FlowLayout.CENTER,30,2));
Lcolor = new JLabel("SELECT LINE COLOR");
Fcolor = new JLabel("SELECT FILL COLOR");
panel2.add(Lcolor);
panel2.add(Fcolor);
JPanel panel3=new JPanel();
panel3.setLayout(new FlowLayout(FlowLayout.CENTER,30,2));
linecolor = new JComboBox();
linecolor.addItem("Choose the color");
linecolor.addItem("Gray");
linecolor.addItem("Orange");
linecolor.addItem("Magenta");
linecolor.addItem("Dark Gray");
fillcolor = new JComboBox();
fillcolor.addItem("Choose the color");
fillcolor.addItem("RED");
fillcolor.addItem("BLUE");
fillcolor.addItem("BLACK");
fillcolor.addItem("YELLOW");
panel3.add(linecolor);
panel3.add(fillcolor);
JPanel panel4=new JPanel();
panel4.setLayout(new BorderLayout());
panel4.add(panel2,BorderLayout.NORTH);
panel4.add(panel3,BorderLayout.CENTER);
shapeSelectionPanel.add(TP1);
shapeSelectionPanel.add(panel4);
shapeSelectionPanel.setBackground(Color.green);
shapeSelectionPanel.setBorder(BorderFactory.createLineBorder(Color.black));
shapeSelectionPanel.setPreferredSize(new Dimension(110, 100));
add(shapeSelectionPanel, BorderLayout.NORTH);
add(new DrawingPanel());
recbutton.addActionListener(this);
cirbutton.addActionListener(this);
polygonbutton.addActionListener(this);
ellipsebutton.addActionListener(this);
public static void main(final String args[])
new PaintShapesDemo().setVisible(true);
public void actionPerformed(final ActionEvent e)
shape = CIRCLE;
if(e.getSource() == cirbutton)
shape = RECT;
if(e.getSource() == recbutton)
shape = POLY;
if(e.getSource() == polygonbutton)
shape = ELLI;
if(e.getSource() == ellipsebutton)
shape = TRAN;
class DrawingPanel extends JPanel
private Image img;
private Graphics2D g2;
public DrawingPanel()
addMouseListener(new MouseAdapter(){public void mousePressed(MouseEvent e){drawShape(e.getX(), e.getY());}});
public void paintComponent(final Graphics g)
if(img == null)
img = createImage(getWidth(), getHeight());
g2 = (Graphics2D)img.getGraphics();
g.drawImage(img,0,0,null);
private void drawShape(final int x, final int y)
switch (shape)
case POLY: g2.drawOval(x,y,100,100);break;
case ELLI: g2.drawOval(x,y,100,50);break;
case RECT: g2.drawRoundRect(x,y,100, 70, 20, 20);break;
case CIRCLE: g2.drawRect(x,y,100,80);break;
case TRAN: g2.drawRect(x,y,100,80);
repaint();
}

use CODE tags to post source code
read selected color from combobox and set colors Or declare two Strings lineColor and fillColor and set these variables on change of combo by adding ItemListener to the combo. and use that varables to set colors ..
Refer:
http://www.java2s.com/Code/Java/2D-Graphics-GUI/Arcdemonstrationscalemoverotatesheer.htm

Can u please help in getting this report "using customer exit."....

Hi friends.
can any body pls suggest how this report lay out could be formed.
when you enter in selection as 0CALMONTH = Nov 2007.
The report should give the values of a K.F (return rate), in the following manner .
july july-aug july - sep july - oct july - nov.
i.e it should always give the values of that K.F starting from july , then july -aug , then july-sep , july-oct and july -nov ..(it shld show the cumulated values starting from july )
The fiscal year always starts from july and ends with june .
say if you give 0calmonth = FEB 2007, THEN THE TREPORT SHOULD FETCH TE VALUES
july2006 july -aug july-sep july -oct jul- nov july- dec jul - jan2007 july2006 - feb 2007
can you plesae tell me in detail how to this . if we have to use CUSTOMER EXIT ,pls give me the code how to do this. your answers will be suitably rewarded.

Hi,
Try using offset varaiable of calmonth.
Regards
siva

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

I cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this?

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this? Thanks.

I am having the same issue for itunes.msi (iPhone 4S and Windows XP)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Capturing through Sony HDV using firewire800 to 400 adaptor is not recognizing can any body help me solve this

Similar Messages

Maybe you are looking for