Capturing user input from a message choice..urgent!!!!!!!!!!

Hi All,
I am working on OAF 5.7H with a Travel Module for a UN organisation .
I have a pge in which I have table Region.In the table i have a message choice Box displaying different Travel Types.In the same row i have a check box with Yes or No value
my requirement is ,whenever the user selects some particular travel types(the page gets refreshed) from the message choice,the check box should be rendered or hidden.
For example
if the user selects travel type MISSION in the message choice ,the page refreshes and the check box shud not be rendered
and
if the user selects travel type HOME LEAVE,the page refreshes and the check box shud be rendered.
But my problem is i am not able to capture the user selection of the message choice and at the same time render the chek box true or false.
If i kan capture the user selection of the message choice values while the page refreshes then at the same time i kan play around with the chekBox.
First of all is this possible and if kan anyone give me a little clue.

Thanks Ram for your reply..I did this but it doesnt seem to work..Because now i realize the problem is somewhere else.
I have a Table RN as i said.
In that table region all the componenets are added in stack layout,i mean to say every stack layout region gets added coloumn wise to the table.
Now i have a Add Anather Row Button.
My requirement is :
Suppose the user selects Travel Type Mission on first row,The page gets refreshed and the chekBox doesnt get rendered.
Now if the user hits Add Anather Row Button and creatres a new row and selects the travel type to be HOME LEAVE whereby the check box shud get rendered in that row.
But the problem is this is not happening.
i am doing as u said..
Now if i choose a Travel type in the second row which shud hide the chekbox then in all the rows the Check Box gets hidden,even in the previous row where it shud be rendered.
This is happening because each of the stack layout region conataining the chek boxes get added as coloumn to the entire table,
So if i do any manipulation on the chek box it gets defaulted for all the rows.
I dont know what to do ..
i need to handl eit row wise.
I am iterating through the row set to capture the travel types in each row.
But on the row set i cannot set any web bean property.
somebody please tell me ho wto crack this.
Thanks

Similar Messages

How to capture user inputs from Enter_query command?

When the user enters query(F7) and inputs some field parameters...how do I capture those variables after they execute the query?
Example:
-Table ABC has a column called NAME
-They enter '%BOB% in the NAME field
-They press F8 (enter-query)
I've tried using:
message( get_block_property('ABC', DEFAULT_WHERE)) to see what's in there and it returns a null. I know that if I hit F7 twice, I can see '%BOB%' displayed in the field. Is there a way to see this without hitting F7 twice?
Thanks.

-Table ABC has a column called NAME
-They enter '%BOB% in the NAME field
-They press F8 (enter-query)
? F8 = execute-query
however. Use the PRE-QUERY and write your message there and show the value of :ABC.NAME
that's it
Gerd
PS: Without hitting two times F7 you have NO chance to get the value of %BOB%. this is an internal cache mechanism of the forms runtime and only hitting two times F7 gives you the information which forms has remembered in a local cache.

Owb - Capturing user input classes

Hi,
I'm using OWB 9.2.0.3 and I'm looking at creating some OMB*Plus scripts to deploy (instead of using the GUI)
I noticed in the sample code (on OTN) for OWB, some classes for "capturing user inputs" in OMB*Plus. I think that this would be a great addition to my scripts (instead of hard coding userid and password).
How do I get this to work? What do I do with these classes? where to put them? and would you have any documentation on how to code this in OMB*Plus.
Thank you very much.
Guy LaBelle

Guy,
The description is missing... and I will submit this right away to be added. The link will be with the location of the downloadable file. Will be there within the next couple of days.
Now, without the screenshots (hope this helps to some extend):
The omb_params zip file contains classes for a generic modal dialog that can be used from OMBPlus for capturing user input. It will support parameters that are text or passwords. If you unzip this file into owb\bin\admin you can try the dialog from OMBPlus.
The Java can be invoked by calling as follows;
# java::new oracle.owb.samples.CaptureParams {
# display_string_list display string for dialog ie. {"Hostname", "Port", "Service"}
# param_name_list to query after dialog is complete ie. {"vhostname", "vport", "vservice"}
# param_type_list STRING or STRINGHIDE or list of tokens (comma separated) for combo box
# title_string_for_dialog Title for the dialog.
# dialog_prompt_string Prompt string for dialog.
or
# java::new oracle.owb.samples.CaptureParams {
# display_string_list display string for dialog
# param_name_list to query after dialog is complete
# param_type_list STRING or STRINGHIDE or list of tokens (comma separated) for combo box
# title_string_for_dialog
# dialog_prompt_string
# ok_button_string
# cancel_button_string
or
# java::new oracle.owb.samples.CaptureParams
# title_string_for_dialog
# dialog_prompt_string
# ok_button_string
# cancel_button_string
There is a Java accessor methiod named 'okButton' that will return a boolean (in Java), the Tcl shell will return 0 for false, and 1 for true. This can be used to determine if the user has pressed the OK or cancel button. Since the user can define the text for these buttons, they can be used for Yes/No style questions for example.
5.1 Example to capture user input;
The following dialog can be created with the Tcl below;
The Tcl to create this dialog is show below, this creates a modal dialog to capture the user input for username, password (in password field), connection string and an option selectable from a combo box;
set pars [java::new {String[][]} 3 {{"User" "Password" "Connect" "Option"} {"user" "pass" "connect" "option"} {"STRING"
"STRINGHIDE" "STRING" "thick,thin"}} ]
set jtitle "OWB Migration"
set jprompt "Please enter migration properties:"
set paramList [java::new oracle.owb.samples.CaptureParams $pars $jtitle $jprompt]
# To check whether OK or cancel is pressed used retrieve okButton/cancelButton on object, then check value (0 - false, 1 - true)
set okpressed [$paramList okButton]
# To retrieve the parameters invoke getValue passing the parameter name, the user is stord in a variable (for example);
set userval [$paramList getValue "user"]
set passval [$paramList getValue "pass"]
set connectval [$paramList getValue "connect"]
set optionval [$paramList getValue "option"]
5.2 Example to create a question-style dialog;
set paramList [java::new oracle.owb.samples.CaptureParams "OWB Dimensional Design" "Do you want to create a cube?" "Yes" "No"]
Like the example above the 'okButton'/'cancelButton' methods can be used to query the button that was selected.
Thanks,
Mark.

How to accept user inputs from sql script

I want to create Tablespace useing sql script , but the location of the data file I need accept from user . (to get the location of the data file ) .
How can I accept user input from pl/sql .
Example :
CREATE TABLESPACE TSPACE_INDIA LOGGING
     DATAFILE 'H:\ORACLE_DATA\FRSDB\TSPACE_INDI_D1_01.dbf'
     SIZE 500M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED
     EXTENT MANAGEMENT LOCAL;here I need to accept location of the datafile from user ie : 'H:\ORACLE_DATA\FRSDB\TSPACE_INDI_D1_01.dbf'

Hi,
Whenenever you write dynamic SQL, put the SQL text into a variable. During development, display the variable instead of executing it. If it looks okay, then you can try executing it in addition to displaying it. When you're finished testing, then you can comment out or delete the display.
For example:
SET     SERVEROUTPUT     ON
DECLARE
    flocation     VARCHAR2 (300);
    sql_txt     VARCHAR2 (1000);
BEGIN
    SELECT '&Enter_The_Path'
    INTO    flocation
    FROM    dual;
    sql_txt := 'CREATE TABLESPACE SRC_TSPACE_INDIA LOGGING
     DATAFILE' || flocation || ' "\SRC_TSPACE_INDI_D1_01.dbf" ' || '
     SIZE 500M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED
     EXTENT MANAGEMENT LOCAL ';
    dbms_output.put_line (sql_txt || ' = sql_txt');
-- EXECUTE IMMEDIATE sql_txt;
END;
/When you run it, you'll see something like this:
Enter value for enter_the_path: c:\d\fubar
old   5:     SELECT '&Enter_The_Path'
new   5:     SELECT 'c:\d\fubar'
CREATE TABLESPACE SRC_TSPACE_INDIA LOGGING
     DATAFILEc:\d\fubar
"\SRC_TSPACE_INDI_D1_01.dbf"
     SIZE 500M AUTOEXTEND ON NEXT 1280K MAXSIZE
UNLIMITED
     EXTENT MANAGEMENT LOCAL = sql_txt
PL/SQL procedure successfully completed.This makes it easy to see that you're missing a space after the keyword DATAFILE. There are other errrors, too. For example, the path name has to be inside the quotes with the file name, without a line-feed between them, and the quotes should be single-quotes, not double-quotes.
Is there some reason why you're using PL/SQL? In SQL, you can just say:
CREATE TABLESPACE SRC_TSPACE_INDIA LOGGING
DATAFILE '&Enter_The_Path\SRC_TSPACE_INDI_D1_01.dbf'
SIZE 500M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL;though I would use an ACCEPT command to given a better prompt.
Given that you want to use PL/SQL, you could assign the value above to sql_txt. If you need a separate PL/SQL variable for flocation, then you can assign it without using dual, for example:
DECLARE
    flocation     VARCHAR2 (300)     := '&Enter_The_Path';The dual table isn't needed very much in PL/SQL.
Edited by: Frank Kulash on Jan 10, 2013 6:56 AM

Where to validate user input from FPM_FORM_UIBB?

I am supporting an ESS OVP app using WDA and FPM.
This question concerns validating/changing user input from an edit page entered through FPM_FORM_UIBB
In a form, on an edit page, we wanted to mask the initially loaded value of a field with asterisks.
I used the feeder class get_data() method to accomplish this.
The user may then overtype the asterisks with content data. At times, the user leaves some of the asterisks there as well.
I want to check the contents of the inpu field, and, if needed, compress out the asterisks.
if not inputfield co '* ' .
translate inputfield using '* ' .
condense inputfield NO-GAPS .
endif .
Where can I put this code? Or, where, generally, do you code validations of form data?
Thanks…
…Mike

Hi Mark,
You should be able to catch the event in PROCESS_EVENT and GET_DATA. I would put the break-point in both of these methods and check for the field values and based on that decide course of action. So steps would be.
1) Put in the break-points in the obove methods.
2) Check the event and the field values you are intrested in.
3) Code accordingly.
Hope it helps.
Laeeq Siddique

User input from pl/sql

How could I get user input from a pl/sql block?
Hope that somebody can help me.
thanx
Amelio.

There is a package DBMS_LOCK that has a SLEEP routine, which suspends the session for a given period of time (in seconds).
However, you can only pause the procedure and not accept user input into the procedure during the pause.
syntax: DBMS_LOCK.SLEEP(1) ;
I need only to run an 'pause' or something like that within a pl/sql block. Do you know if it's possible? Thanks.

How to capture user input for customer exit processing?

I need to calculate the number of working days elapsed in the current fiscal quarter BASED on the USER INPUT on the reporting front. i.e., say the fiscal quarter started on 1 July 2005 and if the user enters 10 July 2005, I should get the value 8 (Assume that Monday through Friday are all workdays). If the user enters 12 July 2005, I should get 10. I have written customer exits and know how to use factory calendar, but THE CHALLENGE is how do I CAPTURE the user input and use it in my exit? During the varible definition, if I select the check box "Ready for input" then the customer exit is not being processed and unless I check that box I can't get a user entry! If I look at the import values in the customer exit, I see i_t_var_range with type rrs0_t_var_range. My strong feeling is that this parameter gets the user input, but I am unable to use it as the customer exit is not being called if I make the user to input the data. Based on the empirical evidence, I felt that user input and customer exit can not co-exist!! Please somebody prove me wrong and let me know how can I use the user input to process my "customer-exit" variable. I would really appreciate any input from the BW community here.

Hi Sameer,
Most likely, I'm missing something, but I think that the answer is very simple.
CASE I_VNAM.
WHEN 'YOUR_CUSTOMER_EXIT_VAR'.
IF I_STEP = 2. After selecting of input variable
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'USER_INPUT_VAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
ENDCASE.
In this typical user exit coding you have a user entered value in LOC_VAR_RANGE (originally in I_T_VAR_RANGE) and you construct your user exit variable value in E_T_RANGE.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Win XP to Win 7 - Using OSD - Capturing User data from Profiles

Hi All,
I'm having a few issues with capturing users profiles using USMT moving from Windows XP to Windows 7 as part of a task sequence - we use a SMP to save the data but strangely it wont apply the data on Apply state store. The OS deployment works fine but saving
user's data and moving it too new PC doesnt seem to apply. I am using Stock requests for the task sequence Find user state storage capture user state etc and like wise at the end apply user state and release user state but doesnt seem to work. Are there any
variables that need to be added to get this working or am i missing something stupid? We do use same PC to image and have mentioned about hardlinking but powers that be want to use SMP. How would this work also if when using Computer association(due to the
Windows 7 pc not being setup yet)?
Apologies if im missing something simple

You are doing what is called a "refresh" OSD scenario...refreshing the OS on the computer while maintaining user state. SCCM automatically creates a computer association in that instance. If an existing Replace (Old to New) computer association
does not already exist, then it will create a Refresh Computer Association to allow the user state to be restored to the same computer. You wouldn't need to do anything special.
The key is that you need to have your task sequence be capable of both capturing the user state at the beginning of the task sequence, then laying down the new OS, then doing the restore of the user state...all within the same task sequence.
If you utilize the MDT integration with SCCM and build an MDT integrated task sequence, this functionality is already built in. Although for simple testing purposes to show the concept, you can simply add to your existing task sequence.
Your task sequence would need to include the following major sections:
Capture user state (including the request/release state store tasks)
Lay down the OS (essentially the components of your regular bare metal imaging task sequence)
Restore user state (including the request/release state store tasks)
Jarvis 
Blog: <a href="http://verbalprocessor.com/feed/" target="_blank">
<img src="http://aka.ms/gmvm2k" border="0"></a> <a href="http://verbalprocessor.comhttp://verbalprocessor.com">http://verbalprocessor.com</a>
Twitter: <a href="https://twitter.com/VerbalProcessor" target="_blank"><img src="http://aka.ms/iejgcv" border="0"></a>
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
The postings on this site are my own and don’t necessarily represent my employer’s positions, strategies or opinions.

User Input from Text File

Hello
I would like to incorporate code into this to allow the script I found on the internet to pull input from a txt file and then wait for the script to end before using the next entry in the text file and run until all entries in the text file have been used.
Any help would be great thx.
Jason
' Get Options from user
GetOptions
If (bInvalidArgument) Then
WScript.Echo "Invalid Arguments" & VbCrLf
bDisplayHelp = True
End If
If (bDisplayHelp) Then
DisplayHelp
Else
If (bCheckVersion) Then
CheckVersion
End If
If (strComputer = "") Then
strComputer = InputBox("What Computer do you want to document (default=localhost)","Select Target",".")
End If
If (strComputer <> "") Then
' Run the GatherWMIInformation() function and return the status
' to errGatherInformation, if the function fails then the
' rest is skipped. The same applies to GatherRegInformation
' if it is successful we place the information in a
' new word document
errGatherWMIInformation = GatherWMIInformation()
If (errGatherWMIInformation) Then
If (bDoRegistryCheck) Then
errGatherRegInformation = GatherRegInformation
End If
GetWMIProviderList
Else
WScript.Quit(999)
End If
If (bHasMicrosoftIISv2) Then ' Does the system have the WMI IIS Provider
GatherIISInformation
End If
SystemRolesSet
If (errGatherWMIInformation) Then
Select Case strExportFormat
Case "word"
PopulateWordfile
Case "xml"
PopulateXMLFile
End Select
End If
End If
End If

Unfortunately the script is too long to be posted but can be found at
http://sydiproject.com/download/and is called Server v.2.3. I have also contacted the author and made the suggestion I
asked about.
Jason
I do not know which script you had in mind but the one I looked at had 1,600 lines of code. As you say, posting it here would be inappropriate. At the same time it is unrealistic to ask for help for such a large script. Asking the author is one option. The
other option would be to identify the module you wish to modify, analyse it until you fully understand it, modify it so that you can run it in a stand-alone manner, then post your question here. You will probably find that you can answer the question yourself
after analysing the code!

Reading user input from a form within a workflow and perform actions in workflow based on the input

Sharepoint 2013
Need to get input from a user based on some condition within a workflow and based on the input received continue with the workflow. It can be a form with a text box and button to which i can redirect and when user enters a value and clicks on the button
,I should come back to the workflow and perform other processing. I should also be able to manually start this workflow from VS.
Tried different approaches like initiation forms ,user input action of SP2010 etc all of these approaches either add some tasks to task list or force me to click on the workflow link to get input from a user.
Any suggestions on this?

Hello
Thanks for the code, but I don't need an array of beans. By the way this code make a bean and an arraylist everytime it's called?
I was looking for something like this:
<form action="myjsp.jsp" method="post">
...so after submitting the result will go to the myjsp.jsp file and in the myjsp.jsp file
<jsp:useBean id="value" class"myBean">
<jsp:setpropertiy name"value" ....>so everytime I click the add button the values will go the mysjp.jsp file and that will set them in the javabean file. this method uses two files but I was looking for doing this in the same jsp file and not sending it to another file.
chers
Ehsan

Selecting user input from Select option into smart form

Hi,
when i use parameter then i wil show company code in smart-form output
but when i use select option then its throwing error parameter specified here is different
what should i do in this case i want to design a big select option screen for taking user input
REPORT ZMM.
TABLES BSEG.
DATA : V_FORMNAME TYPE TDSFNAME VALUE 'ZPUR_REG',
       V_FMNAME TYPE RS38L_FNAM.
*PARAMETERS SO_BUKRS TYPE BUKRS.
SELECT-OPTIONS : SO_BUKRS FOR BSEG-BUKRS.
DATA : Z_CONTROL TYPE SSFCTRLOP,      "Smart Forms: Control structure
        Z_OPTIONS TYPE SSFCOMPOP.      "SAP Smart Forms: Smart Composer (transfer) options.
MOVE 'X' TO : Z_control-no_dialog,        "SAP Smart Forms: General Indicator
               Z_options-tdnewid,          "New Spool Request (Print Parameters)
               z_control-PREVIEW.         "Print preview
MOVE 'LP01' TO Z_options-tddest.         "Spool: Output device
MOVE space TO Z_options-tdimmed.        "Print Immediately (Print Parameters).
MOVE 'PRINTER' TO Z_control-device.      "Output device
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME = V_FORMNAME
IMPORTING
    FM_NAME = V_FMNAME.
CALL FUNCTION V_FMNAME
EXPORTING
    CONTROL_PARAMETERS = Z_CONTROL
    OUTPUT_OPTIONS     = Z_OPTIONS
    USER_SETTINGS      = ''
    BUKRS              = SO_BUKRS.
pls help me in this regards.
ketan..

hi
thnx for your reply
can u pls elaborate in my code
now i changed code   BUKRS    = SO_BUKRS-low.
either i can give low or high but how to select from range
REPORT ZMM.
TABLES BSEG.
DATA : V_FORMNAME TYPE TDSFNAME VALUE 'ZPUR_REG',
       V_FMNAME TYPE RS38L_FNAM.
*PARAMETERS SO_BUKRS TYPE BUKRS.
SELECT-OPTIONS : SO_BUKRS FOR BSEG-BUKRS.
DATA : Z_CONTROL TYPE SSFCTRLOP,      "Smart Forms: Control structure
        Z_OPTIONS TYPE SSFCOMPOP.      "SAP Smart Forms: Smart Composer (transfer) options.
MOVE 'X' TO : Z_control-no_dialog,        "SAP Smart Forms: General Indicator
               Z_options-tdnewid,          "New Spool Request (Print Parameters)
               z_control-PREVIEW.         "Print preview
MOVE 'LP01' TO Z_options-tddest.         "Spool: Output device
MOVE space TO Z_options-tdimmed.        "Print Immediately (Print Parameters).
MOVE 'PRINTER' TO Z_control-device.      "Output device
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME = V_FORMNAME
IMPORTING
    FM_NAME = V_FMNAME.
CALL FUNCTION V_FMNAME
EXPORTING
    CONTROL_PARAMETERS = Z_CONTROL
    OUTPUT_OPTIONS     = Z_OPTIONS
    USER_SETTINGS      = ''
    BUKRS              = SO_BUKRS-low.
ketan..

Capture CLI input from another user

Is it possible to capture commands entered on a router by another user? What device can I use to monitor my routers everyday and check the logs to see what changes have been made?

Hi, If TACACS authentication is working try adding these commands to your router:
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
Then check your TACACS server after you have made some config changes.

Requesting user input from UNIX command window

New to this forum, and relatively new to Java......question for you......
Currently, I am able to request a .txt file from a user in my unix command window by having them type in the following command:
java Game (nameOfTextFile).txt
with the following code:
public class Game {
public static void main(String[ ] args) {
try{
reader = args[0];
catch(Exception g){
System.out.println(g);
where 'reader' holds the .txt file.
What I would like to do is as soon as the user types in the command:
java Game
it gives them the line:
"Please type the file to be input"
and at this point they type in:
(nameOfTextFile).txt
and then I can start working with the text file.
Any ideas?
Thanks

public class Game {
public static void main(String[ ] args) {
try{
reader = args[0];
catch(Exception g){
System.out.println(g);
}This class will not compile. The variable 'reader' is not declared anywhere.
You could create a shell program. When the user enters the name of the shell program at the command prompt, it gives them the prompt to enter the file to be input. And then from within the shell program you call the java program with the name of the file.

Metadata through user input from portal application while new check In

Hi,
We have a requirment to create new doc/html from portal end, and check in it into UCM with user populated metadata's
I have few quetions
- Can I user OOTB RichtextEditor taskflow with little customization.
- Is it a easy option to add a check in form (custom taskflow).
- or we have to create new custom taskflow and use CHECKIN_NEW service using RIDC api.
Thanks
Edited by: 953836 on Aug 21, 2012 2:20 AM

You could go with the standard stuff, but everything depends on what user experience you want to achieve.
a) doc/html
What formats you want to support? HTML is OK, but .DOC (especially if it means MS-Word) might be a challenge
b) you could use SSXA tags (see here: http://docs.oracle.com/cd/E23943_01/doc.1111/e13650/toc.htm ) which could do exactly what you ask for (via Contributor Data Files). Note, however, that this user experience is not often met with understanding. And even more important, mind this: Clarification on SSXA Support with WebCenter Portal
c) you could also use CHECKIN_NEW_FORM (see here http://docs.oracle.com/cd/E23943_01/doc.1111/e11011/c04_core.htm#BABGBCHI ) and somehow consume its output in your custom code. By doing this, you could use Content's standard functionality, profiles, but yet, achieve the user experience similar to what Desktop Integration Suite provides.

Capture user action from method cl_wd_popup_factory= popup

Hi There,
Just wondering if anyone can explain to me how i capture what button a user pressed when using the method 'cl_wd_popup_factory=>popup' and how I perfor different methods/ functionality depending on what they pressed.
At the moment i can create the popup using the code below but it is not displayed untill the current method has been completed, at this point it seems too late to allow me to control of the code.
call method cl_wd_popup_factory=>popup
      EXPORTING
        component    = lr_component_api
        view_name    = 'VIEW2'
        button_kind = if_wd_window=>CO_BUTTONS_YESNO
        message_type = if_wd_window=>CO_MSG_TYPE_QUESTION
      IMPORTING
       POPUP_WINDOW        = window
       COMPONENT_USAGE     = comp_usage.
Any ideas would be much appreciated
Regards
Martin

Thanks Rainer,
That has worked a treat, i used the CREATE_WINDOW method directly rather than using it viw the OPEN_POPUP method but should not make any different should it? see code below
Thanks again
Regards
Martin
data: lr_popup type ref to if_wd_window,
        lr_view_controller type ref to if_wd_view_controller.
data:
lr_api_comp_controller type ref to if_wd_component,
lr_window_manager type ref to if_wd_window_manager.
lr_api_comp_controller = wd_comp_controller->wd_get_api( ).
lr_window_manager = lr_api_comp_controller->get_window_manager( ).
lr_popup = lr_window_manager->create_window(
MODAL = ABAP_TRUE
window_name = 'WND_TEXT'
TITLE = 'TITLE '
CLOSE_BUTTON = ABAP_TRUE
BUTTON_KIND = if_wd_window=>co_buttons_okcancel
MESSAGE_TYPE = if_wd_window=>co_msg_type_none
CLOSE_IN_ANY_CASE = ABAP_TRUE
*MESSAGE_DISPLAY_MODE = MESSAGE_DISPLAY_MODE
lr_view_controller = wd_this->wd_get_api( ).
lr_popup->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = 'ok_text'
action_name = 'SUBMIT'
action_view = lr_view_controller ).
lr_popup->open( ).

Capturing user input from a message choice..urgent!!!!!!!!!!

Similar Messages

Maybe you are looking for