Capturing Video and Audio

Hi all. This is my first post in anything to do with Flex or
Flash for please excuse any ignorance.
I wish to allow someone to simply record audio or video from
the flash app in the browser (i see these options when i right
click) and have that data sent to my sever and save as a flash fiel
to play back later.
It is so common place that i can't imagine there isn't a "no
development required" end to end solution for this where i just
plug the client component into my existing web page.
Anyone have any pointers? I'm just playing around with some
ideas so the cost can't be high, but this is a fairly basic add-on
to flash player that could be done through flex is my thoughts?
thanks,
Steven
http://livz.org

Its simple. DONT cough or sneeze when you are capturing video.
The notebook which you have has a digital dual-microphone array which features beam-forming, echo-cancellation, and noise-suppression software support.
Also Go to Control Panel > Programs and Features, uninstall IDT Audio drivers , restart the computer and install updated drivers from here and see if that helps.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Similar Messages

Capturing Video (and audio) in iMovie 09?

Hello-
I need to import some video and audio form some beta tapes and am wondering if this can be done in iMovie 09? Some of the tapes are hour long documentaries that i have scored and I have read on this forum that people have run into problems when trying to capture more than 5 minutes of footage. I have also read that there have been issues capturing the audio.
Would I have more success capturing in FCE? Picture and audio quality is paramount for me.
Thanks!!

dnito wrote:
Hello-
I need to import some video and audio form some beta tapes and am wondering if this can be done in iMovie 09? Some of the tapes are hour long documentaries that i have scored and I have read on this forum that people have run into problems when trying to capture more than 5 minutes of footage. I have also read that there have been issues capturing the audio.
Would I have more success capturing in FCE? Picture and audio quality is paramount for me.
Thanks!!
You can import into iMovie '09, but you need some kind of analog-digital video converter.
Apple sells this one: http://store.apple.com/us/product/TJ555LL/A
but there are many other devices available. Some with less features are substantially cheaper.
My old Firewire connected camcorders can do this conversion, but not all can, so take a look at your camcorder's manual if you do not already know.
iMovie can take the Firewire output of your converter and capture the import directly to your disk.
The video output quality of VCR tapes will not be as high as digital sources, but, in my experience, you will certainly lose some video quality with iMovie '09. I suggest you test a short segment captured or imported into iMovie '09. If you see video too much degradation, test with FCE. FCE will retain all the quality that your VCR tapes can offer.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

CAPTURING VIDEO AND AUDIO FROM THE DESKTOP

I AM USING A PAVILION DV 7-6163 WINDOWS 7 OS.
WHEN I CAPTURE VIDEO OF MY DESKTOP, I ALSO CAPTURE ANY NOISE MY MICROPHONE PICKS UP. A COUGH OR SNEEZ. HOW DO I PREVENT THIS?
THANK YOU,
This question was solved.
View Solution.

Its simple. DONT cough or sneeze when you are capturing video.
The notebook which you have has a digital dual-microphone array which features beam-forming, echo-cancellation, and noise-suppression software support.
Also Go to Control Panel > Programs and Features, uninstall IDT Audio drivers , restart the computer and install updated drivers from here and see if that helps.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Video and Audio not in sync after capture

Hi there,
This is probably a common problem, I have trawled the site but can't seem to find and explanation for it.
I'm capturing vide/audio into final cut pro from my SONY DVR. The video i have streaming into the sony DVR is from a small covert video device which records video/audio onto an SD card. SO I'm running that into the DVR and then DVR is outputting that as DV PAL firewire (uncontrollable device).
I'm capturing the 40 minutes of video as one clip, and when i drag it into the timeline the audio and video are WAY out of sync. Is there a simple reason for why this is happening?
It's almost as if not capturing it right.
I hope someone can help,
Thanks in advance.
Jamie McIntyre

It is interesting that you are having this problem. I recently purchased a brand new Mac Pro (a week ago) and I am using Premiere Pro and it is doing the exact same thing. I mean this video and audio is REALLy out of sync. I tried capturing an hour at a time, and 30 minutes at a time. Still, no luck. I was debating on getting Final Cut, but after reading this post I am rethinking not only Final Cut, but using Apple all together. Part of me thinks that it is not a Premiere or Final Cut problem but a Mac OS problem. But hey, what do I know. I only edit for a living.

Can we capture the video and audio using cam and microphone in Edge Animate?

Hi Everyone,
I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
Can anybody help me out in this, please...
Thanks & Warm Regards
Vikas

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

Webcam Live - Unable to capture Video when "audio" is on

Unable to capture Video when "audio" is checked.
Error message "Unable to capture Video - check settings for video compressor and Audio compressor". What are these ??
I have Plantronics headset and have tried most "8bit, mono settings"
Capture Video works when audio is not checked.
Am at latest s/w and driver patch levels.
HELP !!!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

ITunes 11.02 update - video and audio no longer working

I updated to iTunes 11.02 last night.
Now, I can't play any video or any audio files, whether using iTunes or Quicktime. Even online Vimeo and YouTube content won't play. Clicking the play button does nothing - the movie or song's progress indicator doesn't move.
In Sytem Preferences > Sound: I get the following message for input and output devices "No input device found" and "No output device found"
There doesn't seem to be a way to check if the graphics card is recognised but it's still showing up in the system profiler.
Looks like the iTunes update has completely nixed my laptop's video and audio capabilities. Does anyone have any recommendations?

I do a lot of SONY HRD FX1 native 1080i HDV capture with Final Cut Pro 5 on my PowerBook 1.3 GHz G4..
Before Apple started supporting HDV, getting the audio and video lined up was such a nightmare that it wasn't even worth working on projects.
My material works great inside FCP 5, but I have had similar problems to what you describe when making the DVDs
However, I use DVD Studio Pro and was able to move the audio relative to the video slightly to get the most important parts to line up. However if your audio and video clips aren't the same length then you will have variable slippage for long clips.
I have been using MPEG Power Professional (Heuris Inc) to do my MPEG2 video encodes as well as my audio encodes and I haven't had the problem lately.

Import video and audio from a dvd into FCP

Is there an easier way to import video and audio into Final Cut Pro - I am playing it on a DVD player and making a digital tape of it. Then logging and capturing it into FCP.

Hello and welcome to the forum!
Yes, there are a few ways that are faster. Have a look at this thread http://discussions.apple.com/click.jspa?searchID=-1&messageID=3465691
You could use software, such as "streamclip", or import by plugging your camera into your capture device and hooking your capture device into your computer and capturing by non-controllable device settings.
Good Luck

IPad captured video and Final Cut Pro

hello,
i am editing videos captured with an iPad 2 in FInal Cut Pro 7, but Final Cut is running really slow and rendering becomes impossible when adding a second video track with either video or photoshop files with a transparency for example. There is no Unlimitted RT option available and the process has become very slow.
Is there any way of previewing video and audio without rendering all the time?
iPad video format is:
H.264, 1920x1080, FPS 29.95
Sequence settings:
1920x1080 - HDTV1080i(16:9)
Pixel Aspect Ratio: Square
Field Dominance: Upper (odd)
Editing timebase: 29.97
Compressor: H.264
Any help apreciated!

Converted videos with MPEG streamclip to Pro ResLT and workflow is a lot smoother now in FCP7.
thank you David and David.
much apreciated!

Video and audio STILL Stopping after 2 seconds

I am running Premiere Pro CS3 for Mac. For some reason, regardless of whether I capture direct fromDV cam or import a video or audio file. Occasionally (3 out of 5 times) the video and audio stops after 2 seconds. I hit space bar and it does it again. Ay ideas why?
I am running this on a brand new Mac Pro too.
Thanks,

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Video and audio not linking

Hello all:
I'm using FC 4.5 and for some reason the video and audio has decided to no longer link together... even though they are captured as merged files. The Stereo Pair and Link command under the Modify tab seem to have no effect (even though the clips indicate that they are - a line runs through them). Only recently started to occur. Real pain the in the buttocks. Any ideas out there?
Thanks
Adrian S

If diligent work with the link and stereo pair t'aint
What does FCP rescue do... other than trash/restore my settings?
Thanks
A.S.
working, perhaps it is time for FCP Rescue.
It can be found at the site listed below - be sure to
select the appropriate version for the FCP you run.
http://www.pistolerapost2.com/fcprescue/
cheers,
x

How do I send raw video and audio data to FMLE?

Hi,
I have raw video and audio data on CPU memory.
How do I send them to FMLE?
Is there sample code or SDK?
Thanks for your answer.

Hi, Burzuc.
Raw video and audio data are from a video capture board like Blackmagic Design's DeckLink or other's.
I want to stream them after some processing by my application.
Regards.

Changing Video and Audio Formats

Hi
Can I use JMF to convert videos and audio from one format to another?
Regards,
N�stor Bosc�n

Yes you can, I'm struggling to do just than, with audio captured from a mic to mp3 file, and also from mp3 file to wav file.
Message was edited by:
MuadDib

Capturing video and store data outside iMovie

Hi,
I would like to capture video from a Sony video outside iMovie library similar to how I captured video on PC side. I would like to store the raw movie data outside iMovies and later import them to iMovies later. How would I do that?
Thanks,

dnito wrote:
Hello-
I need to import some video and audio form some beta tapes and am wondering if this can be done in iMovie 09? Some of the tapes are hour long documentaries that i have scored and I have read on this forum that people have run into problems when trying to capture more than 5 minutes of footage. I have also read that there have been issues capturing the audio.
Would I have more success capturing in FCE? Picture and audio quality is paramount for me.
Thanks!!
You can import into iMovie '09, but you need some kind of analog-digital video converter.
Apple sells this one: http://store.apple.com/us/product/TJ555LL/A
but there are many other devices available. Some with less features are substantially cheaper.
My old Firewire connected camcorders can do this conversion, but not all can, so take a look at your camcorder's manual if you do not already know.
iMovie can take the Firewire output of your converter and capture the import directly to your disk.
The video output quality of VCR tapes will not be as high as digital sources, but, in my experience, you will certainly lose some video quality with iMovie '09. I suggest you test a short segment captured or imported into iMovie '09. If you see video too much degradation, test with FCE. FCE will retain all the quality that your VCR tapes can offer.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Capturing Video and Audio

Similar Messages

Maybe you are looking for