Capturing Video on New iMac with only 1 FireWire Port

Using one of the new Apple iMacs, what is the best way to capture digital video footage (Mini DV) into Final Cut using an external drive as your scratch disk? The iMac offers only one FireWire 800 port. Is it advisable to connect the camcorder to the FireWire port and use a USB 2.0 to connect the external drive? Or can you connect the drive via FireWire 800 and connect the output of the camcorder to one of the other Fireiwre ports on the drive? In this instance I am using a Lacie Rugged Hard Disk that has one FireWire 800, one FireWire 400, and one USB 2.0 port.

They often do not play well with other firewire devices on the same bus. And since all the firewire ports on a Mac are on the same bus, it can lead to incompatibilities during capture. On some computers they work fine, on others they collide.
Try it and see if it works for you. If it does, be happy. If it doesn't, you'll have to do the external drive/camera shuffle.
It goes like this:
• turn off the computer and all connected devices,
• disconnect the external drive
• connect the camera using a FW800 to FW400 cable
• turn on the camera
• turn on the computer
• launch FCP, set the capture scratch folder to the system drive then capture
• shut down the computer and the camera
• disconnect the camera and connect the external drive
• turn on the drive
• turn on the computer
• launch finder and move the captured files from the system drive to the external
• launch FCP and reset the capture scratch folder to the external drive
• open your project and reconnect the media.
Or, use a different (non-Canon) capture device.
Or, get a computer that has multiple internal drives or has expansion capabilites so you can add a firewire card to create a second independent firewire bus for the camera.
Good luck,
x

Similar Messages

How to connect my mini-dv camcorder to new imac with no firewire

I have a Sony Mini-DV camcorder (Handycam) and used to connect it via firewire to my last iMac.
My new iMac doesn't have firewire - just thunderbolt & usb.
Is there a way I can use this camcorder on my new iMac? Are there adaptors, etc.?
Thanks.

As far as I know, all recent iMacs still have a firewire 800 port.
So you would need a firewire 400 to 800 adapter.
21.5" and 27" iMacs ports
One model here:
http://www.sonnettech.com/product/fw_adapter.html

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

I purchased a new iMac with latest iLife suite, however, IMovie will not read my videos. I deleted a 3iVX file that was not working but nothing happens now. Help

I just purchased a new iMac with the latest iLife suite. As part of the migration process in setting up the new machine the 3Ivx video codec was brought onto the new machine as well as my old movies. When I tried opening the movies iMovie crashed and told me it had a problem with the 3IVX video codec, in doing some research I found that the 3IVX video codec created a problem so I deleted it and downloaded Perian 123. The Perian 123 works well with Quicktime but iMove does not now see my old movies. At this point I cannot open any of my movies. Can anyone help? Thanks

There also might be a more updated, compatible 3ivx codec you can install, or just try re-installing a newly downloaded version of of the same old codec: http://www.3ivx.com/download/macos.html
Otherwise download and install MPEG Streamclip: http://www.squared5.com/svideo/mpeg-streamclip-mac.html
In iMovie hold down CTRL and click on the clips that don't open. Choose Reveal in Finder. Convert those files by dragging them into the window of converter program, and save as Apple Intermediate Codec (AIC). That format is native to iMovie and will work perfectly.

I have a new (mid-2011 27" Imac with 2 Thunderbolt ports each driving one 27" Thunderbolt display. The 3 displays work perfectly in OSX Lion but in Bootcamp 4.0 with Windows 7 (64 bit) only 2 screens come up. everything is up to date. Anyonce who can help

I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
Graphic card is AMD Radeon HD 6970M with 2Gb of VRAM. All works 100% in Lion but
in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
Tried updates, calling Apple etc. But no luck. Windows doesn't recognize the 3rd screen while
checking on the driver in windows is tells me it's the latest and best available. ? In VMware
Windows 7 also works fine over three screens so windows can do it. But I need it natively to
work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
solution for this ? It really hurts to have one of these expensive screens staring at you being dead.

I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
Graphic card is AMD Radeon HD 6970M with 2Gb of VRAM. All works 100% in Lion but
in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
Tried updates, calling Apple etc. But no luck. Windows doesn't recognize the 3rd screen while
checking on the driver in windows is tells me it's the latest and best available. ? In VMware
Windows 7 also works fine over three screens so windows can do it. But I need it natively to
work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
solution for this ? It really hurts to have one of these expensive screens staring at you being dead.

I just purchased a new IMac with PS Elements 12 . Upon import or editing I only get an hourglass symbol and no thumbnails

I just purchased a new IMac with PS Elements 12 installed. They migrated my IPhoto library to PSE 12. When I try to import or edit I only get an hourglass symbol or the program freezes

I just purchased a new IMac with PS Elements 12 installed. They migrated my IPhoto library to PSE 12. When I try to import or edit I only get an hourglass symbol or the program freezes

New iMac with OS x Lion. Printing envelopes w/ Address book makes a second blank envelope. Drivers up to date. Have to mark print only first page. Had no problem with Snow Leopard. How to correct.

I recently purchased a new iMac with OS x Lion. Previously was using a four year old iMac with snow Leopard. I have three HP printers with up to date drivers for Lion. When I try to print an envelope from Address Book I have two problems:
1) I have to change the orientation to vertical to get the proper margins, which I never had to do before and
2) It prints a second blank envelope unless I tell it to only print the first page.
Neither of the problems occurred with my previous iMac/w Snow Leopard and it appears to be a Lion/HP software incompatibility. I have worked with a Apple supervisor (Case # 316225300) for hours and finally reinstalled the operating system to no avail.
I do I correct both problems???

Contact HP and ask them to write better drivers for Lion. Find a printer that is more compatible with Lion. I've not printed envelopes with Lion before, though I've had no difficulty with either Epson Artisan 810 or Canon MX700 for regular printing. Sometimes open source drivers also work better than manufacturer drivers. See this FAQ*:
http://www.macmaps.com/printersx.html
While many open source drivers won't give you duplex or printer diagnostics, at least they may work better for other features.
Lastly, I've often found for a more consistent print, saving as PDF, and then printing from Preview can sometimes be the best work around. Someone in the Mac OS X Technologies forum might be able to help you write an automator script to do this in one fell swoop, if you find it works better for your needs.

New imac has only one firewire 800 port?

Is there a hub or repeater you can use instead of daisy chaining. Can't figure out why my old imac has two firewire ports and the new imac has one. How are others managing multiple hard drives? I wish to use a hub for my firewire connections. What is the best way. thanks

You can locate Firewire hubs however they are expensive. I have had 3 Firewire 800 external HD's daisy chained together for 3 years that work flawlessly. The drives I have come with 2 FW 800 ports so this is quite easy, there are several top quality external HD's that are similar including:
OWC Mercury Pro line
Lacie Quadra D2 line (this is what i have)
G-Tech G series line
All of these drives have similar specifications and are all high quality products. I think you will find them to be the most recommended on these forums.
BTW your old iMac had 1 Firewire port and 1 Firewire 800 port not 2 firewire ports.
Regards,
Roger

Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?

Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?
Mike T.

It is strange. I thought 10.x might be the more recent but it also locked up when I tried to the web export. I ran into the no autoplay issue with the webpage so I'll need to look elsewhere to replace a Flash gallery... oh well. Looks like there are probably JS option that might work.
Thanks.

HT2494 How do I output video to a projector from my MacPro17 with only firewire and USB ports?

How do I output video to a projector from my MacPro17 with only firewire and USB ports?

No Mac Pro only has Firewire and USB. Perhaps you've misidentified the computer:
http://www.everymac.com/ should help.

Why is Best for Display setting in new iMac with Retina 5K Display only 2560 x 1440?

I just saw the new iMac with 5K Retina Display. It's awesome! I do have one question, though: The default (Best for Display) resolution is 2560 x 1440. That is the same as my current LED Cinema Display. Adjusting the scale in the System Preferences/Display settings maxes out at 3200 x1800, not 5120 x 2880. I'm not sure why the highest scale option isn't the full resolution of the display. Can anyone explain this or direct me to an article that does?

That got my curiosity too. It's something about the retinas pixel density per inch being higher than other displays, such as a Cinema HD.
The "Best (Retina)" option says "Looks like 2560 x 1440" when you roll over it, but the real pixel density is actually doubled I think, so 5120 x 2880.
The "Looks like..." phrase seems to refer to the size of elements on the screen rather than actual pixels. Perhaps that's what some folks call virtual pixels.

Premiere pro CC2014 crashes on new imac with AMD Radeon R9 M295X

Premiere Pro CC2014 starting up crashes with error "Premiere Pro could not find any capable video play modules"
We use new iMac with OS X 10.10.1 and graphic card AMD Radeon R9 M295X 4096MB which is working faultlessly with all Adobe programs including Premiere Pro CC. Only Premiere Pro CC 2014 crashes and asks for viodeodriver. No alterations can be made on iMac. Apple guarantees graphic card specifications.It seems to us obvious that PremierePro CC2014 is not compatible with this graphic card. We are completely stuck in our work for more than 2 week!! Does anybody can bring help? If necessary we can send crash report. Thanks!

Discussion moved to Premiere Pro forum for quicker & accurate response.

Set up new iPhone 5 with iCloud restore, then iTunes created new library with only content already on phone. How do I find and sync everything in original library?

My daughter got a new iPhone 5 and we set it up using the option to restore her iPhone 4 backup from iCloud. This worked great and everything on the old phone showed up on the new phone. Because we were traveling, we weren't able to sync the iPhone 5 with iTunes at that time.
She purchased new apps and music on the iPhone 5. When we returned home she synced with iTunes, and it seems to have created a new library, with only the content currently on the phone. I don't know if it prompted her to do this on the first sync or not - she doesn't remember.
So in iTunes, the library now only shows the music on the phone. A sync isn't doing much now because when choosing the phone in iTunes and selecting each content type across the top (Apps, Music, Movies, TV Shows) the box is unchecked to sync that content. When I check the box to "Sync Music", iTunes gives a warning:
Are you sure you want to sync music? all existing songs and playlists on the iPhone Becca's iPhone will be replaced with songs and playlists from your iTunes library.
Same goes for apps, except that warning also mentions that the apps and their data will be erased and replaced.
At some point she was also getting a message that this iPhone was associated with another library, but I'm not sure how she had triggered that. She says she canceled out of that. I can see all of the music
How do we get iTunes to see the "old" library of songs, videos and apps without losing the ones she's purchased already on the iPhone? The music files themselves are still on the computer, and include music both purchased from iTunes as well as music ripped from CDs. Thanks for any advice!

See Recover your iTunes library from your iPod or iOS device.
tt2

I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates.

How to get batch recognition of (!) on some tracks after moving library from external hard drive to new iMac (with terabyte hard drive)?

I'm using Lion 10.7.2 and iTunes 10.5.2
I have moved my iTunes music from an external hard drive onto my new iMac (with a terabyte hard drive) with music folder organized - when I try to play some tracks I get the iTunes can't locate warning and so I follow through and show iTunes the track - they are all in the music folder on my iMac hard drive - they all copied over and they all appear in the iTunes library list - so far as I can tell out of a 500 gigabyte music collection - but there are so many giving me the error - many other tracks function as they should too, some work others don't - So I'm looking for a way to get all the error tracks fixed in a batch correction way. Doing this individually with each track just isn't realistic.
Can anyone suggest how I might fix this issue?
Also, after I show iTunes the song location and it plays, I get a find files prompt that looks like it wants to find other files, but that just causes the process to jam and I have to force quit iTunes and then it doesn't remember what I last showed it next time I open iTunes.
Also I'm trying to avoid the use of the consolidate function because that would copy a whole other set of music - not in iTunes - that is in the process of being edited (audio hijack pro and fission tools being used to put vinyl and tapes to mp3) But all that other music just means the consolodate function across my whole computer would be too much.

Some details seem to be coming into focus - I have started scrolling through the main library list A to Z repairing tracks individually (there are thousands, but it's what works so far) - as I work through, it appears the problem occurred on tracks where album artist metadata was different than song artist metadata, predominantly. I'm not sure that is 100% the case in every instance, but that is what it's looking like. I don't why that happened, must be some technical glich I guess.
Also, I tried running Doug's Scripts - the one titled, iTunes Track CPR v1.3 - it is supposed to fix exactly the kind of issue I'm having - I bet it would work for some people with a similar issue - but for my case it only identifies the 'de-linked' tracks and doesn't repair them - that is at least helpful as I scroll though to fix them - I can see exactly which tracks have the issue quickly after running that script - but iTunes doesn't remember that warning symbol after a log-out, so it's only worth running the script on a set of tracks I intend to review and fix in any given session at a time.
If you are interested, Doug's free scripts can be found at
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
there are other interesting and useful iTunes scripts there too...
also, unrelated to the issue I'm having, I found a lot of really useful and time saving metadata fixing free scripts at - hubi's iTunes scripts - the page isn't English, but the script download is easy to find -
hubi's scripts work for batch selections of tracks - so if you import an album and find the metadata screwed up somehow, you can select the whole set of screwed up tags at once (even across a series of albums), run the easy to use script, and watch it all be fixed automatically while you sit back and relax...
http://hubionmac.com/wordpress/category/softwareschmiede/applescripting/itunes/
just for reference, here is a sampling of what hubi's scripts can do...
there are other useful scripts out there - the tough part can be finding the one that helps you...
01-(un)capitalizes
01-(un)capitalizes
This script changes.... THIS TEXT into This Text... or this text
01-Delete spaces
Sometimes invisible blanks are behind an artist name or album name...this script deletes these blanks behind or infront of the strings
01-Delete x first-last chars. of Title
A Name like "01--Ray Of Light" will be changed to "Ray Of Light" and the01 will be entered in the tracks tracknumber id3 field =)
01-fix combined Artist-Title
Sometimes Tracknames look like:
"Madonna---Ray of Light" and in the artist field you see something like"Ripped by Me"... this script puts Madonna back to the right field... all youhave to do is to enter the right delimiter ("---" in this case)
01-switch Artist<->Title...
Switch ID3 field a with ID3 field b (not only Artist with Title any more =)!
01-z_filename ->Title
Sets the ID3 field Title to the track's filename)
01-z_trackNr-Filename->ID3
When a track's filename look like "01-Madonna-Ray of Light.mp3" andyou don't have the track's tracknumber stored in the ID3 Tag... this Scriptcan do this for your =)

Capturing Video on New iMac with only 1 FireWire Port

Similar Messages

Maybe you are looking for