Capturing video via Firewire does not work on CS6

I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?

Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK

Similar Messages

Problems Capturing Video via FireWire

I have had problems capturing video via firewire on my MacBook Pro. It is an early 2008 model. I have tried capturing video using multiple programs, cables and cameras. In both Final Cut Express and iMovie ('08 and '09) I loose the connection mysteriously. It just stops sensing my camera mid capture. I can shut the computer down, programs down and cameras down but nothing seems to work consistently in getting it to work. The weird part is that it does work some times. Recently I tried an auto capture of a whole miniDV tape through a sony handicam via iMovie '09. It got 20mins of the tape then stopped and rewound the tape. When trying it again it read "connection error". I could not get it to work. I put the computer to sleep and came back later. It worked but only captured about 10 minutes then shut down the whole camera and import completely. I switched to manual import and it will now only let me capture about 20 seconds at a time. What is going on? To me it seems like the port itself is malfunctioning and disconnecting the signal randomly. Has anyone else experienced this? What is the cause and what can I do about it?

I've been reading the forums and it seems that there is an issue with the Firewire port in general. I have an external firewire 800 HD and when copying large files or a large number of files the HD gets dismounted unexpectedly. Your case seems similar in that we are both transferring large files via Firewire. Anyone have any fixes for this?

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

On Board Firewire does not work properly

I have a new Qosmio X500 with Windwos 7 Professional. The onboard firewire port has serious problems. I used Adobe Premiere CS5 and when I try to play out a clip through the firewire port, I get video reference errors, which means the port is not sending out a continuous signal. I disabled it and installed a firewire PCI Express card and it works fine. The problem is I need that card slot for other things and I paid for a firewire port and it does not work.
I looked on the internet and apparently new laptops have been having serious firewire problems. Does anyone know how to get this port to work properly? I tried going back to legacy drivers but that didn't work.

I don't have one of these machines, and my firewire stuff is in boxes somewhere.
But, perhaps it's a matter of power or level? I remember at some point USB peripherals had some issues unless used with a powered hub. Perhaps a powered firewire hub might help. I know I have a couple someplace that I used when daisy chaining wasn't working.

Ipod Video to TV does not work :(

I just bought the iPod AV Connection Kit today, it came with the Universal Dock a RCA cable that connects to line out, but for some reason I have trouble displaying videos. It seems like my sound works but video does not show up on TV.
I tried changing setting on iPod to TV>ON still does not work, I tried S-Video still no picture. Can anyone help? Is my cord or dock defectetive? Thanks
iPod Video Windows XP

There is no "Photos" library in itunes, this is why its not listed in iTUnes source list. On the PC it just takes photos from the folder you tell it to to add to the iPod.
What you have to do is on the ipod, goto Photos>Slide show settings>TV Out and set it to "On" or "Ask" whichever you prefer.
On - This setting sends the signal/Photo to the TV screen and not on the ipod screen.
Ask - This setting means everytime on the ipod it will ask you (When you goto slide show) if you want to turn TV Out on or off

Playing Slowmotion video over airplay does not work with ios update!!!!!

after upgrading last ios , airplay to shoot slowmotion video does not work.
I was expecting it to be fixed with recent update, but still not working!!!
I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
or apple should give downgrade option at least.
FIx it, fix it, fix it!
Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i am quite disappointed with my purchsing ipad air 2.

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0fe

Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

Having start up problems, keyboard light and loudness adjustment via keyboard does not work

Often if I start my MacBookPro 13" with Lion it starts up and is than blocked. I can not open the finder nor starting any programm. The turning wheel never stops and I have to restart the book by pressing the on/off button for a long time. Sometimes I need to do that several times till it runs stable.
During this week I experienced in addition that the keyboard light is not working anymore and also the loudspeaker adjustment does not work via keybaord. Only via menu bar.
Any idea what's going on with my book?

Read these two links from the Apple support files:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
Good luck.
Ciao.

Lync 2013 - Silent install via .msp does not work

The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?

Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Facebook video calling / chat does not work after windows 8.1 upgrade / update from windows 8

I originally had windows 8 where facebook calling was working fine.
I upgraded to 8.1 (Single language), since then I am unable to see the Facebook video calling button.
Facebook videocall button disappeared in each profile.I tried firefox, chrome but all ended up the same.
Please help.

Hi,
Please check this fix:
To activate video calling
https://www.facebook.com/videocallnow/posts/250167428331356
Please Note:
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Kate Li
TechNet Community Support

Find via network does not work

Hi..I´m having a big trouble when trying to find images by it´s keywork when they are stored in my company server. Let´s explain
I take some photos or even work with Photoshop, Illustrator or InDesign files. I set different keyword for the files and move it to a central folder in my server, where everyone inside the company has acess.
The problem is: Nobody is able to find that images...In Adobe Bridge (Cs3 or CS4) they go Edit > Find, set the criteria and run the search > not done. The unique person able to find that images by searching via keywork is myself inside my own computer (the one I´ve set files´ keywords)
I´ve tried everithing, check options in find dialog box, triing to centralize a cache folder in server and pointing all the bridges to that folders, purge and export cache to folders, and so on, but I do not know if it´s anything related to cache.
In Resume, nobody is able to find images by any criteria if they are stored inside server (just the people that set keyword is able).
How to solve it?
Thank you a lot
Gustavo.

This question has been asked many times, but no one responds back as how they solved the problem.
Seen this recent link. It sounds like you have tried suggestions at end of post #1, and it did not work.
If you find something that does work please post back to help others.
http://forums.adobe.com/thread/556836?tstart=0
Message was edited by: Curt Y
Note: No files will be found unless the folders are indexed.

Loginscript via GPO does not work when local admin

Hi
We are in the middle of deploying Windows 8.1 to our
organization. We are using Windows 7 Pro today. We a mapping network drives
with a logon script via GPO. It is done with the good old net use commands that
has been working for years e.g.:
net use K: \\server1\Data /PERSISTENT:YES
net use L: \\server1\Design /PERSISTENT:YES
It works perfectly on Windows 7, but on the new
Windows 8.1 machines, no network drives are mapped. I can see that the GPO are
applied fine to the machines. It seems to have something to do with UAC and the
fact that the users is local admins. If I remove the use from the administrator
group, the script works fine and the drives are mapped just like in Windows 7 (5
minutes delayed, but it works...!). If I keep the user in the administrator group
and instead disable UAC by setting the EnableLUA to 0 in the registry it works
too, but then it gives me a lot of other issues with Metro apps and the Windows
Store.
Has anyone found a good solution to map network drives
for users that needs to be local administrators, without disabling UAC completely
in the registry?
Any help would be
appreciated!
Thomas | MCP | http://www.techwork.dk

Thank you Techguy
"Group Policy Preference Drive Maps", does not just resolve my issue it does also give me some a lot of new awesome options I don't have with net use commands via GPO :-)
I have not tested it with Windows 7 yet, but I am pretty sure it will work there too
Thomas | MCP | http://www.techwork.dk

OS X Restore with Time Machine via LAN does not work

Hi all,
i did a full backup of my mac mini with mountain lion on a time capsule via LAN. Tried to do a full restore on a new hard disk and connect to the time capsule after i booted into a restore environment. I was able to choose the time capsule as the restore source and connected using my dedicated backup user, which was also used to create the backup before. But after i cannot chose my just created backup!
Using a local USB disk with time machine everythings workes fine. But the main reason why i chosed time capsule is, that i can make my backups of all the used mac books and minis via LAN / WLAN...
So, is there anybody else experiancing this Problem?
Regards,
David

Hi,
tested OS X Restore with Time Machine via QNAP NAS Box - working without any problem. So with the Time Capsule it might be firmware problem?!
Will update thies Thread when i've any news...
David

TS2756 i downloaded the new itunes and now my hotspot via usb does not work on my macbook. (it was before) i have an iphone 5s.

usb hotspot not working with new itunes. i have an iphone 5s. wifi hotspot still works but the macbook says in system preferances under iphone that its not connected or not responding. really annoying

Why not? What happens when trying to use it?
"Will not work" is useless when asking for help. Without specifics, no assistance can be provided.

I'm trying to play a video but it does not work or load up, issue? No video with supported format or MIME type found issue in Firefox 28.0 Windows vista

no playback of videos -latest flash player installed and updated add-ons but it still dosn't work. only youtube works but no other site.

Will you not post the link to the video like I requested, or at least let us know if you can play the videos on the pages I linked to? It would prevent more random guesswork.
Firefox doesn't try to play files it can't handle. When coming across a direct link to a file that could be handled by a plug-in, but that plug-in isn't installed, Firefox would display a download prompt.<br>
That's not the issue here, where there's an unsupported format error. That suggests an MP4 file that can't be played. Even if a plug-in that can handle MP4 files were installed, Firefox probably wouldn't use it due to bug 861090.
Firefox has supported HTML5 H.264 video on Windows Vista since version 22.0. There's no point in installing the very old — and likely abandoned — Windows Media Player plug-in.

Capturing video via Firewire does not work on CS6

Similar Messages

Maybe you are looking for