Capturing Video with pre-installed WebCam

Okay! I'm really excited because I just downloaded the trial but I want to capture my video with my pre-installed webcam..the ones that are installed on the computer.. i have the hp-pavilion dv2000 with the webcam but every time i choose the capture button on and click webcam it tells me i have no webcam connected.. but the other programs like Windows Movie Maker and the Pinnacle Studio does not do that..help please any suggestions.. THANKS

Not every webcam will work, sanyg.
Adobe has an approved list, but even many not on the list work.
If yours doesn't, though, it just doesn't. And, unfortunately, I'm not sure of any way to make it work.
Sorry.

Similar Messages

How can I dual-boot Windows 7 with pre-Installed Windows 8.1

Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1.
Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre-installed Windows 8.1 and the OEM licence.
and other question... if the upper is not possible. Okay. I will delete Windows 8.1 and Install Windows 7 permanently until Windows 10 is released, but.... If I have Windows 7 with CMOS BIOS and SecureBoot disabled, then supposing that I could have problems with Windows 7, and I want to upgrade to Windows 8.1 again, and supposing that I have a Recovery Partition backed in a USB drive, what can I do for re-install OEM Windows 8.1 and the licence.
Thanks.
Solved!
Go to Solution.

As I said above...
..you will need to install essentially all of them to make that laptop work as designed.
..install the TVAP before any other Toshiba utility.
-Jerry

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

You must be signed into the Apple Store with your Apple ID or it won't work.
and
How to deal with a 100 Store Error:
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here;
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences/
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

Capturing video with iMovie?

How can I capture video with the built in iSight in my mac book pro with iMovie?
Thanks.

Hi Mark:
Using iSight with iMovie
http://docs.info.apple.com/article.html?artnum=61929
Sue

Unable to capture video with MSI StarForce 822 GeForce 3!

I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
This brings me to two questions:
First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
Thanks for your help.
Charles Bergmeier

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

Imac g5 not capturing video with built-in isight...

in imovie hd (iLife 05). anyone ever run into this issue?
cL

Hello Cody. I don't think RJ's suggestion will help you with this one.
in imovie hd (iLife 05). anyone ever run into this issue?Everybody does. According to Apple, the iSight built into an iMac G5 (iSight) is not able to capture video into iMovie.
See the "How can I get my built-in iSight to capture iMovie video clips?" section of Built-in iSight ( Late 2005 -> ) for more info and a workaround.

My recently purchase iMac came with pre-installed operating software but no backup disks. What happens if I find it necessary to re-install?

Having ditched Windows after years of frustration I recently bought an iMac with Lion pre-installed. While not necessary at this tme there were no installation disks sent with the purchase. What happens should I find it necessary to reinstall the operating system?

No. You do NOT have to buy Lion again.
If you replace your HDD or erase the recovery partion, it will download and install lion from Apple' servers.
See:
http://support.apple.com/kb/HT4718
Quoute:
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
/Dennis

N5548P with NX-OS 5.0(3)N2(1) wont work with 2248TP and 2232PP with pre-installed Fabric Extender OS

Hi,
We recently bought 2 N5K and 4 N2K Fabric extenders, now we are having problem installing the fabric extenders as the FEX just wont go up.
switch(config-fex)# sh fex 100 detail
FEX: 100 Description: ADM/128-SVF-NS302   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po3 - Interface Down. State: Configured
    Eth1/7 - Interface Down. State: Configured
    Eth1/8 - Interface Down. State: Configured
    Eth1/9 - Interface Down. State: Configured
    Eth1/10 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:23.536463: Offlining Module
11/22/2011 07:49:23.564858: Deleting route to FEX
11/22/2011 07:49:23.572372: Module disconnected
11/22/2011 07:49:23.573795: Offlining Module
11/22/2011 07:50:34.741573: Module register received
11/22/2011 07:50:34.742363: Image Version Mismatch
11/22/2011 07:50:34.742496: Registration response sent
11/22/2011 07:50:34.742741: Requesting satellite to download image
11/22/2011 07:52:55.922414: Image preload failed.
11/22/2011 07:52:57.91269: Deleting route to FEX
11/22/2011 07:52:57.106904: Module disconnected
11/22/2011 07:52:57.108092: Module Offline
11/22/2011 07:52:57.110203: Deleting route to FEX
11/22/2011 07:52:57.115149: Module disconnected
11/22/2011 07:52:57.116546: Offlining Module
11/22/2011 07:52:57.150559: Deleting route to FEX
11/22/2011 07:52:57.155607: Module disconnected
11/22/2011 07:52:57.156970: Offlining Module
11/22/2011 07:52:57.189131: Deleting route to FEX
11/22/2011 07:52:57.193969: Module disconnected
11/22/2011 07:52:57.195342: Offlining Module
11/22/2011 07:52:57.234153: Deleting route to FEX
11/22/2011 07:52:57.239023: Module disconnected
11/22/2011 07:52:57.240432: Offlining Module
11/22/2011 07:54:40.815191: Module register received
ADM_128-SVF-NS102(config-fex)# sh fex 101 detail
FEX: 101 Description: ADM/128-SVF-NS304   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po4 - Interface Down. State: Configured
    Eth1/11 - Interface Down. State: Configured
    Eth1/12 - Interface Down. State: Configured
    Eth1/13 - Interface Down. State: Configured
    Eth1/14 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:46.163035: Module disconnected
11/22/2011 07:49:46.164468: Offlining Module
11/22/2011 07:49:46.213737: Deleting route to FEX
11/22/2011 07:49:46.219043: Module disconnected
11/22/2011 07:49:46.220454: Offlining Module
11/22/2011 07:49:46.250091: Deleting route to FEX
11/22/2011 07:49:46.255026: Module disconnected
11/22/2011 07:49:46.256417: Offlining Module
11/22/2011 07:51:09.395617: Module register received
11/22/2011 07:51:09.396381: Image Version Mismatch
11/22/2011 07:51:09.396511: Registration response sent
11/22/2011 07:51:09.396756: Requesting satellite to download image
11/22/2011 07:55:08.409032: Image preload failed.
11/22/2011 07:55:09.671589: Deleting route to FEX
11/22/2011 07:55:09.682174: Module disconnected
11/22/2011 07:55:09.683181: Module Offline
11/22/2011 07:55:09.702525: Deleting route to FEX
11/22/2011 07:55:09.710557: Module disconnected
11/22/2011 07:55:09.711930: Offlining Module
11/22/2011 07:55:09.741583: Deleting route to FEX
11/22/2011 07:55:09.746544: Module disconnected
11/22/2011 07:55:09.747934: Offlining Module
11/22/2011 07:55:09.786138: Deleting route to FEX
11/22/2011 07:55:09.791026: Module disconnected
11/22/2011 07:55:09.792426: Offlining Module
I am seeing "image mismatch" definitely because our N5K is pre-installed with 5.0(3) while fex is using 4.2(1) pre-installed.
Is upgrading the N2K possible? Hope someone can help
Thanks,
Ramon

Hi All,
Using the N7K to install the Nexus 2000 yielded the same result as connecting to our N5K.
switch(config-if)# sh fex 101 detail
FEX: 101 Description: FEX0101   state: Image Download
FEX version: 4.2(1)N1(1) [Switch version: 5.1(3)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.1(3)
Module Sw Gen: 21 [Switch Sw Gen: 21]
pinning-mode: static    Max-links: 1
Fabric port for control traffic: Eth1/11
Fabric interface state:
    Po101 - Interface Up. State: Active
    Eth1/9 - Interface Up. State: Active
    Eth1/11 - Interface Up. State: Active
    Eth1/13 - Interface Up. State: Fabric Up
    Eth1/15 - Interface Down. State: Configured
Fex Port        State Fabric Port Primary Fabric
Logs:
11/28/2011 06:27:09.662264: Requesting satellite to download image
11/28/2011 06:29:15.232681: Image preload failed.
11/28/2011 06:29:16.459514: Deleting route to FEX
11/28/2011 06:29:16.464452: Module disconnected
11/28/2011 06:29:16.465542: Module Offline
11/28/2011 06:29:16.502250: Deleting route to FEX
11/28/2011 06:29:16.507315: Module disconnected
11/28/2011 06:29:16.520566: Offlining Module
11/28/2011 06:30:27.820404: Module register received
11/28/2011 06:30:27.821854: Image Version Mismatch
11/28/2011 06:30:27.822322: Registration response sent
11/28/2011 06:30:27.822512: Requesting satellite to download image
11/28/2011 06:33:01.789172: Image preload failed.
11/28/2011 06:33:03.21324: Deleting route to FEX
11/28/2011 06:33:03.26651: Module disconnected
11/28/2011 06:33:03.27635: Module Offline
11/28/2011 06:33:03.60441: Deleting route to FEX
11/28/2011 06:33:03.64871: Module disconnected
11/28/2011 06:33:03.68626: Offlining Module
11/28/2011 06:34:14.640167: Module register received
11/28/2011 06:34:14.640895: Image Version Mismatch
11/28/2011 06:34:14.641367: Registration response sent
11/28/2011 06:34:14.641546: Requesting satellite to download image
11/28/2011 06:37:33.144396: Image preload failed.
11/28/2011 06:37:34.373433: Deleting route to FEX
11/28/2011 06:37:34.378391: Module disconnected
11/28/2011 06:37:34.379795: Module Offline
11/28/2011 06:37:34.429214: Deleting route to FEX
11/28/2011 06:37:34.433627: Module disconnected
11/28/2011 06:37:34.436989: Offlining Module
11/28/2011 06:38:45.746477: Module register received
11/28/2011 06:38:45.747175: Image Version Mismatch
11/28/2011 06:38:45.747841: Registration response sent
11/28/2011 06:38:45.748041: Requesting satellite to download image
11/28/2011 06:41:57.68356: Deleting route to FEX
11/28/2011 06:41:57.80615: Module disconnected
11/28/2011 06:41:57.83824: Module Offline
11/28/2011 06:41:57.98377: Deleting route to FEX
11/28/2011 06:41:57.102731: Module disconnected
11/28/2011 06:41:57.106928: Offlining Module
11/28/2011 06:41:57.151366: Deleting route to FEX
11/28/2011 06:41:57.155672: Module disconnected
11/28/2011 06:41:57.158411: Offlining Module
11/28/2011 06:43:08.457500: Module register received
11/28/2011 06:43:08.458280: Image Version Mismatch
11/28/2011 06:43:08.458874: Registration response sent
11/28/2011 06:43:08.459069: Requesting satellite to download image
11/28/2011 06:47:41.719070: Image preload failed.
11/28/2011 06:47:42.949044: Deleting route to FEX
11/28/2011 06:47:42.954394: Module disconnected
11/28/2011 06:47:42.955658: Module Offline
11/28/2011 06:47:42.973122: Deleting route to FEX
11/28/2011 06:47:42.978185: Module disconnected
11/28/2011 06:47:42.981593: Offlining Module
11/28/2011 06:47:43.26743: Deleting route to FEX
11/28/2011 06:47:43.31820: Module disconnected
11/28/2011 06:47:43.35748: Offlining Module
11/28/2011 06:48:48.755085: Deleting route to FEX
11/28/2011 06:48:48.760546: Module disconnected
11/28/2011 06:48:48.764950: Offlining Module
11/28/2011 06:48:54.260037: Module register received
11/28/2011 06:48:54.260794: Image Version Mismatch
11/28/2011 06:48:54.261268: Registration response sent
11/28/2011 06:48:54.261452: Requesting satellite to download image
switch(config-if)# 2011 Nov 28 06:51:43 switch %FEX-2-NOHMS_ENV_FEX_OFFLINE: FEX-101 Off-line (Serial Number XXXXXXXXXXXX)
It's very frustrating.
Regards,
Ramon

Capture video with specified resolution

Hi, can you show me how to capture an h.264 mp4 video with the specified resolution(ex 360*480) on windows phone using c#, VS2013? Thanks in advance

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion'
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Capturing Video with FX-5900XT - Poor Quality of Image - How to improve the capture quality ?

Hello all,
I would to know what is the best sofware to use when you want to capture Video ?
I used MS Movie Maker, and WinDvd Creator but I didn't like very much of the result, the video had noise, the color and the image definition was not good, is there any way to improve it ?
I am using the last drivers from Nvidia. I generated videos in AVI format and MPEG 2.
I have old videos from my JVC VHS, my connection between my cam and the video board is a RCA Cable. When I see the video in my VCR is good but the digital result was not good.
Is there any software filter ?
Is there any tutorial or White Paper about capture using Nvidia driver ?
Thanks all for your help,
Regards,
Mario Augusto Rodrigues

I can't see a relation between a hardcopy and a analogic movie digitalization ?
Could you explain me ?
In any case the quality of the image is very good in a hardcopy.
Does the Nvidia Capture Drive have some adjust ? Sensibility ? Noise ? Color ? Sharpness ?
Regards,
Mario A. Rodrigues

Capturing video with DV camcorder says "Capture Device Offline"

Just trying to capture video already recorded on my camcorder. The firewire is setup correctly and the options are all right, but the capture window still says "Capture Device Offline".
Somebody help me?!?!?!

http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
-and more about Windows http://forums.adobe.com/message/4708997

Capturing videos with MacBook Pro

Hello,
I need to know if i can capture videos from a MiniDv handycam direct to my Mac...
the camera is a JVC MiniDv GR - D850.
Tks!!!!!

That camera, like most miniDV cameras, uses FireWire to transfer video to the computer. As long as you have a FireWire port on your machine you should be OK - at least for recoded data.
I note that you say 'direct' in your post. By this do you mean have a live preview on your Mac showing what the camcorder is seeing? That's less likely, but I can't say for sure it will (or won't) work.

How to capture videos with my BB8320 curve

I am now using BlackBerry Desktop Manager software version 4.60.
But I dont see any video capture out there.
Is this below one device software 4.50 I found the old version?
I want to record videos and read html emails.
Thank you for advice.
FeaturesDo more with the BlackBerry® smartphone you already own! BlackBerry® Device Software v4.5 is a free update and offers a whole new world of fun and functionality.
Discover innovative ways to work and play with BlackBerry Device Software v4.5.
*Note: certain features require BlackBerry® Enterprise Server software and/or may not be available on every BlackBerry smartphone –User Interface
Refreshed Look – Enjoy messages, address book entries and a calendar that make better use of colors and fonts. They’re also laid out to more closely match the programs you use on your computer.
Email
Improved Email Layout (Rich HTML Email) – View tables, images and fonts with formatting that looks better than ever.1
Remote Search – Find emails that are stored on a BlackBerry® Enterprise Server.2,3
Attachments and Files
Edit Microsoft® Word and Microsoft® PowerPoint® Files – Just download the attachments and start typing!
Copy, paste, change font formatting and more.4
Download and Save – Grab a file on the Internet, and save it to your smartphone to view or edit later.
Want to edit Microsoft® Excel® files on your BlackBerry smartphone? Visit the DataViz® website to register with DataViz and download an update for Documents To Go that includes Sheet To Go.
SureType
Save Time as You Type – Word completion for SureType keyboards will monitor what you type and present a list of options to scroll through so you don’t have to type the whole word.
BrowserMobile Streaming – Access videos, music or even sports and news clips from websites with mobile streaming capabilities.5BlackBerry® MapsLocal Search - Enter a search term like ‘pizza’ to view a list of places to grab a slice within a 30-km radius.6Voice N

you are mixing two entirely different things.
on one side, you have your device. Its OS needs to be at least 4.5.
=> home screen >> options >> About
I think you still have 4.2.2.
on the other side, you have your PC with the Desktop Manager. It can be 4.3 4.5 4.6 or even 4.7, it won't change anything on what your device can do (video or html email or docs to go)
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Can't capture video with FCP 5.1

Hi All,
Here is the case. I'm trying to capture the video from my newly baught Sony HDR FX7. Here are the specs:
I've connected it thru Firewire 400 on the back of my G5.
G5 660GB HD, 5.5Gb RAM
In Easy set up I've selected HDV-1080i60
When I go to file-log and capture, it connects to camcorder and says VTR OK on the bottom of the screen.
When capturing the video (after I've connected to log and capture I push play on camcorder and then click capture now on FCP) I could see on the capture screen and my video running but here an there a green line would cross the film and then it would slow down for a 10th of a second and line would run accouss the capture window again. The type of lines you'd get in the old movie? .
After I've captured all 5 sigments I had on the tape and when I tried to play (I went to file-import-file, I've selected the captured clip from my internal HD where the FCP put the files). The file opened in browser. And then it open in preview window of FCP. At this point the clip that is 1 minute long would play for 2-4 second and end there. The quality of it was also very, very poor (and I filed it at HD 1080i.
So, the quality was really poor. It was the case with all 5 clips I've captured from FX7. All of them 2-4 sec. long and very poor quality.
Now, if I try to play the clip from camcorder and select "in" and "out" points and then batch capture via the same log and capture window, it would tell me that it's "unable to locate timecode, the timecode appears to be missing from the tape. Please verify that tape is timecoded correctly"
So, I was reading this forum and did this:
Tried to go to user preferences and set "on time code brake" select "make new clip"
Nothing helped.
Also it's worth noting. When I push play on camcorder and click capture now, new window comes up and it says on the bottom of it "searching for meadia..." press esc to stop or something like that. May be it's not finding it?
Also, when I first filmed with this camera, I would stop after every clip, turn off the camera, plug it into tv and preview what I've filmed.
Either way, the few seconds of the clips that I"ve got are very bad quality. When I view the clips on my TV and monitore connected thru 3 colored cables, the video was ok, I'd even say good, just too much noice in it. But quality of capture is horrible.
If anyone is readying this, could you please give me some ideas where to go with this. I don't know what to do from here

Question is answered

Capturing Video with iMac?

Hey!
We are somewhat new to mac's. I have an older video camera that stores to tape. The only output is VHS or a yellow RCA connector. With a PC I think I could pick up a cheap video capture card for as cheap as $50.
Is there some sort of similar USB or Firewire external capture card I could plug into the iMac?
Would I use software on the mac to import it with the capture card or the software that comes with the card?
Any help would be appreciated!
Thx,
Brent

Many miniDV cameras have a pass through facility for converting analogue to digital, if you have a friend who has one of these cameras you may end up paying for a few beers for borrowing it rather than $ 50 for a card.
However there are cards and external devices available to you as a mac user if you can't find a willing friend with such a camera.

Capturing Video with pre-installed WebCam

Similar Messages

Maybe you are looking for