Capturing with Premiere Pro CS5 & Canon Legria HV40

Hello everyone,
I have an issue trying to capture footage from my Canon Legria HV40. My desktop operates with Windows 7 / 64bit and I use a firewire port when attempting to capture from the DV cassette on the Canon Legria HV40. After opening Premiere Pro 5 (not a trial version) I connect my camera via all the correct ports and open the capture window in the software. After setting up all my preferences for the capturing process the software recognises the camera and I am able to operate the camera from my desktop (fast forward, rewind, play etc...).
The issue starts at this point. When i press "Tape" or "Play" then "Record" to start the capturing process the camera kicks into action. However the software does not record anything from the camera.
Does anyone have any suggestions or have they come accross this issue before. Any help would be appreciated.

MKoffy Hi,
It works just fine here, same set up, but with CS5.5.2 not older version.(5.5.1 or 5.5 did not work), other contributers spoke of a "LEGACY" driver?, I think Harm Millard he may know more than I do. We are PAL, the camera obviously works, make sure you have camera set at 1920 x 1080 i.And the same setting in PP, however PP should automatcally set that for you.
In fact when Exporting to Tape it is amazing and starts the camera with out having the record button executed., it (the HV40 is Anamorphic at 1440 x 1080 (the limitation for Pro tape) and will record at Progressive, the pixels are rectangle not 1.0 , but the output is i). Do not save clips to another DRIVE.It is best in the RAID set up. according to Canon Specs it records at HDV 1080/50i , 1080/25i (PAL) These settings must match the set up in Premiere Pro 5.5.2 exactly.I do not set IN or Out points, it might have been a good thing to stripe the tape in the first place as it will recognise the Indexing numbering better that way.
I must add the quality of the Export even to Blu-ray astounded me. Nearly as good as the Canon 5D Mark II 1920 x 1080p but, that was from a CF card.
Good luck
Ps. Frankly the Premiere Pro CS5.5.2 surprised me when it recognises all that when it went to work. Because when you used Premiere Pro 1.5.1 everthing was manual, well nearly.

Similar Messages

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

Capturing Troubles with Premiere Pro CS5.5

Hello!
I am fairly new to Premiere and I'm having a little trouble with the capturing option.
I have Premiere Pro CS5.5, a MacBook Pro (13 inch), a Sony HDR-CX 110 camera connected to the MacBook with an HDMI cable and a HDMI displayport adapter.
I think I have everything I need to get it connected but it seems that whenever I select capture the window that pops up tells me that my device is offline.
I have a 13 inch MacBook Pro. I bought it in August of 2010. I have a Sony HDR-CX 110 camera. I have it hooked up to a HDMI Displayport adapter via a HDMI cable and the camera is plugged into the wall and turned on playback mode. I know the displayport works because I have a dual monitor set up and the adapter works because I have connected my TV to my Mac so there should be nothing wrong with the adapters and ports. But for some reason the camera doesn't appear to show up whenever I try to do this capturing option.
The camera's box does say "compatible with iMovie" and I have been able to import footage I collected without the camera plugged in to the computer, such as a guitar performance and an interview. That process was pretty simple and was connected to my computer via a USB.
Now, I think that maybe I'm just trying to do something more advanced with the camera and the camera can't do it. But if I am wrong (and I hope I am) I don't where to go from here? Any help would be so greatly appreciated!
Thank you =)

That will only work if your camera HAS a firewire connection... I think for Mac it is call iLink, but since I'm Win I'm not sure about that
Just do what was said and copy the folder to your hard drive and import from there

Using my JVC BR-DV3000E DVR with Premiere Pro CS5

I have been testing out the use of my JVC BR-DV3000E DVR (Digital Video Recorder) using a new PC running Windows 7 (64 bit) and Premiere Pro CS5. The connection is via the firewire cable supplied with the device. It worked fine on my original PC running Windows XP with Premiere Pro 1.5.1.
When I open the capture window in CS5 it shows the message "Device Offline" at the top of the capture window and all the transport controls are greyed out. I have played around with the settings but nothing seems to overcome the problem. I am trying to capture miniDV footage in SD. Has anyone come across this problem before on either the same device or similar and has anyone any suggestion on how to fil the problem please?

Try these to see if they work
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html
I do know that the demo of Scenalyzer puts a mark in the video, so don't do anything real until you pay and enter the registration code
I don't know about the other program

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Buying Macbook pro with Premiere Pro CS5.5 Help needed DPU?

I am gearing for film a video production. Buying the macbook pro and I PP CS 5.5. Current project I want to use PP CS5.5 rather than FCP. I am new to all this. All I want to do now is cut and sound edit with some efx matting and titles etc. Do I need a DPU right now? Is so what is a basic one low cost? (I've seen bad reviews on the nvidia) Any help would be great I am buying all this soon.
Now shooting canon 7d will convert to pros res. In the future will shoot Red.

RjL190365 wrote:
Although Thunderbolt is available on MBPs, MBPs with Thunderbolt enabled are still signinficantly slower than Windows desktops and laptops with the same CPU. This is, as Harm mentioned, due to their lack of ports offered. Even with Thunderbolt, MBPs are still available only with onboard Intel graphics or AMD/ATi GPUs (which cannot use Premiere Pro CS5.5's MPE GPU acceleration feature at all), and they do not support even two fast hard drives (the only supported fast hard drive on the MBP is the OS drive, and all of the offered external ports on most MBPs are significantly slower than the internal physical transfer speed of the OS drive). A few MBP's come with FW 800 ports, but even those are slower than the internal physical transfer speed of many notebook hard drives.
And did I mention that all versions of OSX (including the current release) are very poor at multithreading?
Who needs the FW 800 ports when you can daisy chain up to six devices through the Thunderbolt port? The MBP has one TB port and the new iMac has two TB ports. Take a look at these links:
http://fcp.co/final-cut-pro/news/212-thunderbolt-in-action-4-hd-streams-into-fcp-then-to-a -display
http://fcp.co/hardware-and-software/pro/211-lacie-are-first-up-with-thunderbolt-little-big -diskq-700mbs-and-its-tiny
http://fcp.co/final-cut-pro/news/210-apple-press-demo-shows-thunderbolt-running-4-streams- uncompressed-hd-on-the-15q-in-fcp-peaking-at-600mbs

Exporting For YouTube - Premiere Pro CS5 (Canon XL2)

I shot a promo video with my Canon XL2, and would like to upload the finished product to YouTube at the highest possible quality in order to help promote the company I work for.
Footage shot in 30p at 29.97 fps, 16:9 - NTSC.
Sequence settings are all correct and match my footage perfectly.
I have exported the video as H.264, AVI, MOV, MP4, MP2, WMV and countless other formats. When played on my computer the video quality is SUPERB. I am ecstatic at how it turned out, HOWEVER, when I upload the video -in any format- to YouTube, it looks absolutely horrible - as though it were shot with a webcam.
Does anyone have any advice as to what I might be doing wrong? Anyone had any experience with the XL-2 and Premiere Pro videos being ugly when uploaded to YouTube?
Thanks a bunch!

Be very careful when using Adobe's presents for YouTube, Vimeo, etc. They have a fixed frame rate but it doesn't always match your source frame rate and this adds additional render time and can drop or add (adding is much worse) frames.
The worst offender is a preset that is for non drop-frame 30.0 fps (instead of drop frame 29.97) because every 3 seconds 3 frames get added.
Also be aware that when exporting for the web (or most anything other than to DVD), you want to use square pixels.
This might require a bit of tweaking with the presets but it is well worth the effort.
864x480 is the square pixel equivalent to 720x480 widescreen (1.21...).
For more indepth info on the presets (and my rants on the matter) - have a look at my CS5 and C5.5 articles.
http://www.eventdv.net/Articles/News/Feature/Benchmarking-Adobe-Premiere-Pro-CS5-70277.htm
(under the heading "Don't trust the presets")
http://www.eventdv.net/Articles/ReadArticle.aspx?ArticleID=74852
(under the heading "Working with watch folders in Adobe Media Encoder CS5.5")

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Switching tabs while working with Premiere Pro CS5

Hello there.
I am currently working with Adobe Premiere Pro CS5 and I notice that when I'm reproducing/previewing the timeline or am recording, for example, an audio track, everytime I switch tabs (switch to another window or to desktop), in this case the recording stops. I've searched around Preferences and in help files and I cannot find an option to make Premiere continue what he's doing despite me changing windows. Is this even possible? It would be very helpful.
Cheers!

>Is this even possible?
No... PPro must have full control of the computer to work... shift to another program and PPro stops

Trial version of Audition CS 5.5 cannot interact with Premiere Pro CS5?

I have Premiere Pro CS5 and downloaded a trial of Audition CS 5.5. The option "Edit in Audition" in PP CS5 is greyed out, so I cannot test the sound editing interaction between the two PP and Audition.
What is wrong?
Is it not possible to use PP CS5 with Audition CS5.5?
Is it not possible in the trial version of Audition?
Or am I doing something else wrong...?
Greatful for your time and help!
Håkan

Thanks durin for your kind answer.
Since there is a menu item called "Edit with Audition" it seems as if there at least has been a connection before? So, can I buy/try an earlier version of Audition to make it work?
I want to test if Audition can remove some background noise that occur in one of my productions, before I buy. If it is possible to try it out in an earlier version , I guess I will also be prepared to upgrade PP, but I wont buy anything without knowing it can solve the issue.
Reagrds and thanks again,
Håkan

Closed captioning with Premiere Pro CS5.5, exported to wmv/mp4

My employer suddenly has a push to be ADA compliant, so all videos going forward need to have captioning, and would prefer to have it closed captioned. I've read that you can add captions with Encore and output them to disc, but since all of the videos are posted online, nothing is burned to disc so that doesn't help. I also know you can use scc or mcc files to add closed captions to a broadcast stream, but since these aren't for broadcast, that doesn't help either.
All of this means is that I need to add closed captioning to online video only. What I'd like to know is this: Is there any way to add closed captioning to video that will be streamed online? Or, am I doomed to putting everything into lower thirds?
I'm using Premiere Pro CS5.5 (I also have AE CS5.5).
Thanks

As a broadcast engineer, I would suspect, and it would make sense that online video files would also be encoded with EIA-608 and EIA-708 set forth by the Electronic Industries Alliance and monitored by the FCC ( Broadcast Standard ). This makes sense to me as all existing video programs which already comply with the EIA-608 and 708 standards would then, automatically play closed captioning when encoded to a video file for playback.
The FCC has recently required all online video to include Closed Captioning as per the Accessibility Act of 2010 ( FCC: MB Docket No. 11-154) Subpart 6 of this document appears to define that all devices which may playback video through the internet, must be able to support the CEA-708, or closed captioning for digital broadcast television. CEA-708 is a form of embedded data often referred to as metadata which is contained within the MPEG-2 stream.
Not to get too technical about MPEG streams, but in essence, even though your end up with a single file, there are traditionally 3 elementary streams of data contained within. Each one has a PID, or Program Identifier number which identifies the Video Stream, Audio 1 stream and Audio 2 Stream. Additional elementary streams can be added such as a data stream containing Closed Captioning- or whatever like Dolby Digital. The PID allows a Demultiplexer to split the streams appropriately for playback.
I would hope there is a program out there that would embed the scc or mcc file ( however they are produced ) possibly after you export the sequence to a file. One of my favoite and best kept secret long-term video websites out there is videohelp DOT com. there is a plethera of kewl software to do all weird things to video, maybe even add CC!
All this still doesn't help us with Premiere Pro though...

Capturing with Premiere Pro CS5 & Canon Legria HV40

Similar Messages

Maybe you are looking for