Capwap high bandwidth utilization

Hello,
I would like to know if this traffic is correct... (wan link - remote APs)
minute:
15 minutes:
I think that something is wrong... there is a high bandwidth utilization.
All APs are configured with h-reap and local switching.
All traffic wan link - 15 minutes:
thanks.

Maybe this answer my question?
Ongoing Exchanges
Heartbeat
  The LWAPP architecture provides for a heartbeat timer that is
      accomplished by a series of Echo Requests and Echo
      Responses. An AP periodically sends Echo Requests in order to
      determine the state of the connection between the AP and the WLC. In response,
      the WLC sends the Echo Response in order to acknowledge the receipt of the Echo
      Request. The AP, then, resets the heartbeat timer to the
      EchoInterval. The LWAPP protocol specification draft contains
      a detailed description of these timers. The system heartbeat, coupled with
      fallback mechanism, is 4 packets every 30 seconds and is comprised of these
      packets:
LWAPP ECHO_REQUEST from AP (78 bytes)
LWAPP Echo-Response to AP (64 bytes)
LWAPP PRIMARY_DISCOVERY_REQ from AP (93 bytes)
LWAPP Primary Discovery-Response to AP (97 bytes)
This exchange generates 33 bytes of traffic every 30 seconds.
RRM Measurements
There are two ongoing RRM exchanges. The first one, at every 60-second       interval, is the load and signal measurement and consists of 4 packets. This       exchange always adds up to 396 bytes:
LWAPP RRM_DATA_REQ from AP (107 bytes)
LWAPP Airewave-Director-Data Response to AP (64 bytes)
LWAPP RRM_DATA_REQ from AP (161 bytes)
LWAPP Airewave-Director-Data Response to AP (64 bytes)
The second sequence of packets is the noise measurement that includes a       statistics information request and response sequence. It is done every 180       seconds. This short exchange of packets averages approximately 2,660 bytes and       typically lasts 0.01 seconds. It consists of these packets:
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP STATISTICS_INFO from AP
LWAPP Statistics-Info Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP 00:14:1b:59:41:80
LWAPP Airewave-Director-Data Response to AP
LWAPP RRM_DATA_REQ from AP
LWAPP Airewave-Director-Data Response to AP
LWAPP STATISTICS_INFO from AP
LWAPP Statistics-Info Response to AP

Similar Messages

  • High Bandwidth Utilization

    Hi all,
    i am a newbie here. Currently i am working as net admin which is i need to monitoring and manage my workplace network( education center )
    I got a few question about network traffic flow. Here is the issued.
    I got high bandwidth utilization so high after office hours which is only on night. as we know, after office hours there is no person at the office but the traffic flow on bandwidth utilization is high.
    what are the possibilities of this issued? If there any possibilities that cause the event, I'd like to know everything that may cause it.
    Thanks

    What switches do you have?
    What router are you using?
    What servers do you have?
    What time does the high utilization start and what time does it end?
    Are you running backup across the WAN links?

  • High bandwidth utilization / Gen.variant.kazy virus issue

    Hi All We are a business critical organization(bank).huge traffic is originating from main policy manager server.we analyzed the traffic and it's originating from f secure update port where all the policy manger proxies connecting to.traffic size is about 2gb.its been happening since friday.all virus databases are up to date and virus definition updates are very small.other issue is, Gen.variant.kazy virus is detected by f-secure but it cannot be disinfected or deleted.those are two critical issues that we are having at the moment.your early feedback is much appreciated Thank you

    Hello Asanka,
    Could you please open a support ticket with fsdiag so that we can take a look at your problem?
    Please review the following articles concerning your infection:
    https://www.f-secure.com/v-descs/other_w32_generic.shtml
    https://www.f-secure.com/v-descs/rogue_w32_systemtool.shtml

  • Top Wireless Client Bandwidth Utilization on WCS?

    Hi, there.
    Can I get the top wireless client bandwidth utilization info / report from WCS? I would like to know how high they can reach, and how many are those 'power users', so far I only find "Busiest Clients" but not quite certain sure about the meanings of the "threshold" and "utilization' besides, the minimum interval is 1 hour, which seems to long for me, I would like to have some data like MRTG which is in 5 minutes range, thanks.
    Leo

    Welcome to the discussions!
    There is no "relay" function in the "extend a wireless network" setup. Each AX that is set to extend communicates directly to the Time Capsule and not to another device that might be between it and the Time Capsule.
    If you need the "relay" function, your only real option to setup the WDS configuration to see if that might work better in your circumstance.
    When you say that you have one AX setup as a client only, this implies that it is set to "join a wireless network". In the "join" setting, the AX only receives a wireless signal, it does not "extend" or rebroadcast the wireless signal. You might want to try setting this device to "extend" to see if that might help the network performance.

  • Bandwidth Utilization Avg or Max for capacity Planning best practice

    Hello All - This is a conceptual or Non-Cisco product question. Hope you can help me to get this best industry practice
    I am doing a Capacity planning for the WAN Link Bandwidth. To study the last month bandwidth utilization in the MRTG graph, i am seeing  two values
    Average
    Maximum.
    To measure how much bandwidth my remote location is using which value i have to use. Average or Max?
    Average is always low eg. 20% to 30%
    Maximum is continuous 100% for 3 hour in 3 different intervals in a day and become 60% in rest of the day
    What is the best practice followed in the networking industry to derive the upgrade size of the bandwidth by using the Utilization graph
    regards,
    SAIRAM

    Hello.
    It makes no sense to use average during whole day (or a month), as you do the capacity management to avoid business impact due to link utilization; and average does not help you to catch is the end-users experience any performance issues.
    Typically your capacity management algorithm/thresholds are dependent on traffic patterns. As theses are really different cases if you run SAP+VoIP vs. youtube+Outlook. If you have any business critical traffic, you need to deploy QoS (unless you are allowed to increase link bandwidth infinitely).
    So, I would recommend to use 95-percentile of maximum values on 5-15 minutes interval (your algorithm/thresholds will be really sensitive to pooling interval, so choose it carefully). After to collect baseline (for a month or so)  - go and ask users about their experience and try to correlate poor experience with traffic bursts. This would help you to define thresholds for link upgrade triggers.
    PS: proactive capacity management includes link planning for new sites and their impact on existing links (in HQ and other spoke).
    PS2: also I would recommend to separately track utilization during business hours (business traffic) and non-business (service or backup traffic).

  • Apple TV bandwidth utilization

    Have my ATV with wireless. What's the average bandwidth utilization (kbps) for Apple TV to project stuffs from ipad?

    Nope.
    Planning to use Apple TV in meeting room for presentation purpose. Worry that 1 Aruba 105 wireless access points might not be enough for 20 laptops (internet browsing & internal server access) and Apple TV use.
    Any idea about what's the maximum bandwidth Apple TV will use when doing mirroring?

  • Hi, We are running domino application in windows server 2008r2 machine, we are facing High RAM utilization issue, but there is no such process are running.

    Hi, We are running domino application in windows server 2008r2 standard virtual machine, we are facing High RAM utilization issue, but there is no such process are running. Machine is running in ESXI host, most of the time it shows high RAM utilization.
    We upgraded the ram from 6 to 8 GB, but still facing the issue,
    Where as other  VMs working fine.
    Need a help to find out the issue.

    Hi Sathish sampath,
    You can use Resource monitor and Task Manager->Performance to monitor the RAM memory utilization, I also recommend you to download the
    RAMMap to get more detailed memory information.
    For more detailed information to troubleshoot this issue, please also refer to this thread:
    memory performance problem. Please help.        
    You can also choose to post your monitor picture to help us to troubleshoot.
    I holp this helps.                       

  • Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Well, it's probably one of two things: either the awesome dude(tte) who developed this awesome extension was tired of updating or the changes in FFox software architecture carried out between version 3.x and 4+ created challenges that were too difficult for him to surmount or a combination of both. Honestly, I love Mozilla but I think they dropped the ball on the throttle issue. It's such an obvious and necessary function and it's so easy to implement. They should have included it a long time ago as in built feature. And, if you are browsing and looking at this post and you agree. Add a suggestion in mozilla.org. The more of us asking for this function, the better.
    Meanwhile, I have the following solution for you:
    Solution 0.6.9.23.11 (DIY Version of my Solution ):
    Setting Up a Separate Portable Firefox 3.6.x that runs independently of and simultaneously to your latest version of Firefox
    Get FireFox Portable 3.6.24:
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    It's a portable app, meaning that it's got all it's profiles and preference and application files in the same directory. It won't compete with your current installation of Firefox, has it's own separate extension folder etc...
    Get Firefox Throttle 1.1.6
    http://firefox-throttle.en.softonic.com/ (I couldn't find it in the official mozilla site)
    It will be flagged as incompatible with even that old version of firefox (but it isn't). You just need to turn off compatibility checking. You can do that with this extension:
    https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=search
    If you have Bookmarks you want to port to the portable (bad pun intend), backup them up to bookmarks.json file on your desktop and import them to the portable version. You can export/import more stuff using FEBE addon but that's a whole world of headaches if you don't your doing.
    Many of your extensions favourites extensions will no longer work on FFox 3.6.x but if, in that same addon's page, you look around until you find a link to previous versions of the addon, you will notice that the compatibility info is right below the version numbers. Just download and install the latest version that is compatible with you 3.6.x....
    Voila mon ami! Your FFox 3.6 portable has just become your own private Download Mule whom you can throttle to your hearts content (ever throttle a real Mule??? I wouldn't try it, personally...) Do your regular browsing in another (unthrottled) browser and do your big downloads in the Mule...
    If you want to keep using your brand spanking new Firefox for other types of browsing while using this portable Mule edition for the downloads, just add -p -no-remote to the shortcut leading to your Firefox Portable Mule edition.
    For example, my taskbar shortcut to my Firefox Portable is:
    ""C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe"
    I just changed it to:
    "C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe" -p -no-remote
    This will make it occupy it's own independent instance and I can use the both my Firefox Nightly and the Firefox Portable editions at the same time (each one, using a different profile ie. extensions, cookies, password, cache etc).
    If you're on Linux, you can just run this on Wine and set the Windows Version to Windows 2000 in the Wine config,
    If you want to get rid of the Portable Apps splash screen, click here:
    http://www.ghacks.net/2011/06/06/getting-rid-of-portableapps-splash-screens/
    Solution 0.6.9.23.11 (Non-DIY Version of my Solution):
    Download my preconfigured but SWAGGED-THE-HECK-UP PortableFirefox 3.6
    Having realized that some of you may find the above to be daunting. I took my own customize firefox portable, took out all my data and compressed the folder (it's portable, so it'll run as soon as you unzip it).
    Here is a screenshot:
    http://www.mediafire.com/?o95nkwo8y6q535j
    Here is the download link:
    http://www.mediafire.com/?xdw87ivf3184u2s
    Don't forget to modify your Start/Taskbar shortcuts:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe"
    I just changed it to:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe" -p -no-remote

  • How to Determine the Actual Bandwidth Utilization

    Router A (Serial Port) in location A is connected to Router B (Serial Port) in location B through an IP VPN connection. How will I be able to determine the actual bandwidth utilization of the link between Router A and Router B?
    Thanks

    hi
    Pls check this link which can help u out to configure and analyse/find out the actual usage of the bandwidth on both th sides of your location.
    http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
    regds

  • High Bandwidth Voltage Input Isolation

    Hello,
    I'm using the NI 6025E DAQ board and connect it through the SC2050 conditioning board to an analog I/O board, 5B01. I would like to isolate between the board and an analog signal coming out of of a DUT unit, and I need the isolation unit to be able to handle signals of Mghzs bandwidths.
    I realize that I cannot find a 5Bxx unit with such high BW, but what do you recommend I should do instead ?
    Michael.

    Hello Michael,
    I see that you are looking for an isolation module to connect to your 6025E device that has a bandwidth in the MHz range.  Unfortunately, I think this type of setup will not work for you since the 6025E has a maximum sampling rate of 200kHz.  If you need to be able to sample data in the MHz range you will need to have a device that can sample much faster (i.e. High Speed S-Series or  NI-Scope products). 
    Typically you do not see much signal conditioning for these types of devices since they have such a high bandwidth.  For example if you look at our SXCI isolated analog input modules they have a bandwidth of just over 20kHz.
    I hope this helps.  If you have any additional questions can you please give us a little more information about the signal coming from your DUT (i.e. voltage and frequency range and what type of isolation you are looking for)?
    Regards,
    Jesse O.
    Applications Engineering
    NIC
    Message Edited by Jesse O on 10-17-2006 10:44 AM
    Jesse O. | National Instruments R&D

  • LMS 4.2.3 Server high CPU Utilization

    Hi All,
    We are observing high CPU utilization on the lms server. tomcat is the process eating more than 1GB of the memory i checked from the task manager.
    Server details:
    device license : 100
    windows server 2k8 R2, with 8gb physical memory.
    anybody suggest what might be causing the issue.?? because of this performance reports were affected.
    Regards,
    Channa

    Hi Channa,
    log into dbreader using the following::
    http://servername : 1741/dbreader/dbreader.html
    or
    https:// servername : 443/dbreader/dbreader.html
    user Id is DBA
    Database Name is upm
    password :: user defined (by default password is c2ky2k)
    1.       Here is the query to get the pollerwise managed MIBObjects:
    "select count (*), PollerName from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId = b.PollerId and b.Poller_State NOT IN (1) Group by b.PollerName;"
    2.       Here is the query to get the total mibobject count for the active pollers
    “select count (*) from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId =
    b.PollerId and b.Poller_State NOT IN (1);”
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • CiscoWorks LMS 4.0.1 High Memory Utilization on Windows 2K8 R2

    Hi,
    What causes LMS 4.1 to have high memory utilization?

    I made a little batch
    https://supportforums.cisco.com/docs/DOC-21031
    It show what process in LMS is eating you RAM / Hogging the CPU.
    I don't think resources are used very effectivly in LMS
    I did have the impression that some virtual machines running LMS 3.2 actually performed better than real machines, as if the VMware saw it load all these java virtual machines and that it was 45 times the same thing only being used for a few % and therefore could be swapped to disk, leaving the resources to what was actually working in LMS.
    What worries me more than the resources used is the gui per.formance.
    Cheers,
    Michel

  • Desktop Window Manager high CPU utilization

    I have several Windows 2012 servers that are showing high CPU utilization (70% or higher) coming from the Desktop Window Manager.  I do not have the Desktop Experience feature installed on these machines.  The interesting thing is that the process
    for dwm.exe does not show up as a service that I can stop or restart.  I've read through the various posts about re-registering dmw.exe so that the service shows up again, but nothing has worked.  Since these are application and file servers with
    no need for regular desktop use, I don't really need any fancy desktop graphics or performance.  I have the Advanced Performance Options set to 'Background services'.  Can anyone tell me how to stop dwm.exe or at least reduce it's CPU footprint?
    Thanks,
    Joe

    Hi Joe,
    Based on my research, On Windows 8 and Windows Server 2012, DWM is used at all times and cannot be disabled.
    For more detailed information, please refer to this article:
    Desktop Window Manager is always on:
    To troubleshoot the high usage of CPU, I would like to recommend to follow this article to collect and analyse the relevant log files and dump files:
    Troubleshooting High CPU performance issues - Part 1
    If you want to analyse the dump file, I also recommend you can open case and contact Microsoft support.
    I hope this helps.

  • Rate limit high bandwidth application

    I have a 10mb line from a site office to my HQ.
    there is one user in the HQ office that is running some high bandwidth application, taking up 50% of my total bandwith.
    its some video monitoring system.
    i am using a C1841 router.
    how do i limit the bandwidth the user can occupy ?
    SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP Bytes
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CC9F    46M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CCE7    32M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CD01    25M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CC9C    21M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CE2B  9478K

    i have enable nbar on the router.
    what i can see that all are gre traffic.
     FastEthernet0/1
                                Input                    Output
       Protocol                 5min Bit Rate (bps)      5min Bit Rate (bps)
       gre                      223000                   288000
       bgp                      0                        0
       ntp                      0                        0
       bittorrent               0                        0
       citrix                   0                        0
       cuseeme                  0                        0
       custom-01                0                        0
       custom-02                0                        0
       custom-03                0                        0
       custom-04                0                        0
       unknown                  0                        0
       Total                    223000                   288000

  • Bandwidth utilization on topology diagram of LMS 4.2

    Hi,
      I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also  . In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
    Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ??  to find the traffic flow  bandwidth utiliztion.
    thanks ,
    pandian .

    Hi
    You have to enable RMON to measure bandwidth utilization.
    Take a look on the Monitoring and Troubleshooting With Cisco Prime LAN Management Solution 4.2 guide.
    Begining on the page 7-43 you can find the procedure.
    Hope you can set it

Maybe you are looking for

  • How can I change the default "from" email account on my iPad/iPhone in IOS 8.2?

    I currently use my phone & pad for business and personal use.  My emails should come from my business account but they're coming from my Yahoo account.  How can I change it without having to manually change each email?  I've checked online but I don'

  • ITunes for my iPad 2 iOS 6.01 won't work.

    iTunes for my iPad 2 iOS 6.01 won't work. When I open it it shows me the iTunes U page and wont't open the normal iTunes Help! P.S. I tried to restore it a few times but it doesn't work.

  • "cannot open display" error meaning

    I'm trying to get dwm running for a while now, and when I try to run it, it says "cannot open display". Then I thought, ok, maybe i have to install an X server, so I got Xorg, installed it, removed dwm and then recompiled it, but I got the same error

  • Adobe 9.3.4 won't uninstall-network unavailable-need msi file

    My OS is XP.  I've used Adobe Reader for years.  It was working just fine until about a month ago.  When I attempt to print from Primopdf,  I can get the screen that says "Create PDF"--once I click on it nothing happens. That happened a time or two b

  • Pictures not showing up in text

    I am having a strange problem. Somebody will text me a picture, my texts say I have a new message, but nothing is there., Eventually , maybe, the picture will finally show up. Usually many many hours. This happens all the time. Sometimes the pic neve