Car and conveyance Issue

Hi,
Car and conveyance allowance for which we have configured for two wheeler perk amount 800 Rs now our client ask us to increase the perk amount from 800 Rs to 1200 Rs how do we change the amount.
In T7INT9? or some where?
Regards,
prasath

As per standrad
800 Per month and 9600 Rs per Annum , so 1200 Rs and 14400 Rs per annum is exempted so you are in the right way
Before going to change please take the advice of the Legal counsel once as this is statutory one

Similar Messages

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But wont work anywhere now

After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Java proxy client logical port transport to Q and prod issue in target addr

Hi All,
I have a java proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
Thx
mike

Hi Michael,
I can only help from that point of view that I believe this question belongs to the forum
Service-Oriented Architecture (SOA) and SAP
Please try to raise this question there.
Thanks and Regards,
Ervin

MacBook Pro Health and safety issue: Potential Burn during normal use

Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

Mike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

Adobe Reader 10.1.2 and IE9 Issues

For about a year I have been seeing people post about IE9 and unable to open Adobe PDF files from various locations on the Internet. Adobe you must fix this problem as it has troubled many individuals over the past year or so. This is not a browser issue but rather a problem with the Adobe Reader as it works with Adobe Reader 9.x and not 10.1.x
Windows 7 has been out for two+ years and Microsoft is on the forefront of releasing Windows 8 within a year. I have performed the steps posted on several sites indicating that you must "uncheck open in browser,""Uncheck enable protected mode" "Uninstall /reinstall," "Update to latest version of Adobe," "Remove Adobe X and roll back to 9.x", etc... All of these issues are still existing for many individuals. Why has this issue not been resolved? I find it disturbing that Adobe just seems to "NOT CARE" and blatantly blame IE9.
I work for a global solutions provider and as such we should be able to roll out Adobe reader X to any client running Windows 7 and IE9 without flaw.
Now we are having to roll back from Adobe Reader X to 9 this can impact several enterprise corporations and clearly should be able to be resolved with a complete fix for reader 10.x or a new version of Adobe Reader rather than a simple band aid
I would love to have this fixed than have to roll back over 10000+ machines to Adobe Reader version 9.x
Adobe please fix this issue as this is impacting individuals, small corporations, enterprise corporations globally!

Yes, I have seen this a couple of times here in the forums. But I, for one, have no problems opening PDF files in IE9 (as long as I use the 32-bit version).
Maybe Adobe has troubles reproducing the issue?

SUGGESTION TO ADOBE: PLEASE CREATE A PROPER FORUM FOR SUBSCRIPTION AND BILLING ISSUES

I think and many will agree, that it is about time that Adobe would create a forum just for subscription or billing issues.
There are so many people looking for help that taking this issues to a specific forum, would help in reducing the signal to noise ratio and keep a focus on specific topics. Yes, Adobe should fix these issues and I am sure they are being address but creating proper channels would speed up support, from Adobe staff and from people that, for crazy reasons, volunteer here.
I try to help, but sometimes just the Creative CLoud forum is like a raging river of people looking for help and if it was divided in some topics, it would be a great help. So:
- Create a Creative Cloud membership and Billing issues: It is about time
- How-to and technical issues are still well served by the topics.

Hi Luis,
Welcome to Adobe Forum,
I completely apprehend your point of view, the billing issues deal with credit card information which are highly secured information, there is only one authorized group taking care of billing issues.
Regarding Invoice issues, please feel free to raise it here, we do try to resolve them at the earliest.
The direct link to Adobe Support is http://adobe.ly/yxj0t6
Regards,
Rajshree

IOS 4.2.1: Intermittent Playback and Static Issue Resolution - JVC KD-AVX77

Hey guys, it appears that iOS 4.2.1 fixes the issue with the intermittent playback and static issues that I was having in my car. I just played two songs continuously with no issues.
I have the JVC KD-AVX77, and with iOS 4.1, I was having nothing but problems with music playback. It had got to the point that it was intolerable to use my iPhone in my car.
I am extremely pleased that it seems like Apple took everyone's feedback about this issue, and came up with a fix to it. Too bad that I've already stored my car for the winter.
Please post your own findings. I know this issue was across multiple head units and car manufacturers.
Message was edited by: Ack_

Same problem here. I have a 3gs and this intermitent static/hiss/lag happens when i connect through the usb on my toyota prius. This problem did not happen before the latest software upgrade. I have switched out the cables. Also tested on an ipod touch without the software upgrade and had no problem. It's a crazy annoying problem! Sounds a bit like listening to vinyl. I have also tried switching to airplane mode, but that didn't do anything. I have also reset the iphone while connected to the usb (the same way i frequently have to because of an earlier problem i've had with the usb failing to work in the car at all...) and that has not fixed it. I'm going to try connecting via bluetooth today and see what happens - i'm guessing that will be fine, but i don't like to listen via bluetooth.

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

Bluetooth car kit connectivity issue after IOS 8.1.2 update

After the IOS 8.1.2 update I cannot connect my IPhone with the Bluetooth car kit (hands free) system of my car.
Before the update connectivity was perfect, after the IOS 8.1.2 update the car kit does not find the IPhone any longer.
To solve this issue I deleted both the car kit and the IPhone from the paired devices list of both (my car and the Iphone) and tried to pair them again - no success. The car kit just does not finds the Iphone any longer.
Please, help!!!

Just to share the way I finally solved the problem - might be helpful to somebody else.
I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

I have purchased Iphn 4s recently and since then i m facing issues around Battery back up, Software and even issue around hard drive. I have visited I store where they formatted my phone but nothing positive has happened. How do i escalate?

I have purchased I phone 4S on April 30th 2014. Since I bought this phone, I have been facing issues such as Battery Back up, Software and Hardware issue and hang issue. I had visited I store last month where they just formatted my phone. The issues were not taken care completely, even till now the issues are on. I would appreciate if you could help me with the right escalation desk for raising my voice to Apple team.
I have been using apple product since long now and never face such dissatisfaction in past
Regards,
GB

Hello, when you are having an error on your iPhone and going to the Apple store to get it taken care of, make sure you speak up and provide as much detail as you can. The first iPad Mini I had bought had errors on it, and I didn't speak up and provide further details on my issue.
Hope your issue gets resolved soon!
-RazorOrange

Lumia 720 Jumping and Vibration issue.

Hi, my Lumia 720, bought 10 days back is automatically vibrating and jumping between windows, to bing and home screen, and stopping at app switcher screen or home screen, and touch stops working(display and 3 keys). It works only after I press power on/off. Initially its occurance was less frequent but now its more often. Did reset, contacted nokia care and they reinstalled the OS. Yet, its happening. Please advise on this.

My Lumia 720 which I bought recently suffers from a strange behaviour. It starts vibrating suddenly, wildly and on its own without any provocation and after jumping several screens in quick succession, stops at Bing. This activity lasts anywhere from 10 seconds to half a minute. During this time, everything that I have been doing, attending a call, writing email or whatever, stops and after this forced interruption, I am forced to go to Bing. I have tried various steps like setting Display+touch settings to normal ( from high) and stopped Bing from operating on its own, but the problem continues. Is it a hardware or oftware issue? I have also seen that there are several users experiencing this problem and reporting this issue for quite sometime. In any case, Nokia should be aware of this and issuing the approrpiate patch to correct this situation. I wonder, Is anybody at Nokia listening?

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

I can't get any sound! Doesn't work with headphones or the connector thing in my car and it used to! Help?

I have a seventh generation nano whihc has stopped providing sound out of the blue. It showa that it is playing on the screen, but no sound! I have tried re-setting it, different headphones and the adapter cord in my car and nothing works. Any suggestions? Thanks!

I'm having the same issue with my iPhone 4S. I was hoping to find a solution around here somewhere.

IDE's and JRE (issue)

I recently reformatted my home computer and I'm using the most updated version of Vista x64. I also installed the 32-bit and 64-bit versions of JRE and JDK on my PC. My IDE (Eclipse) is installed on my Flash Drive, which also contains the latest JRE and JDK.
My problem is this: When I attempt to compile code in Eclipse, it will successfully complile, but if there is a need for a new window, such as gridworld (http://www.horstmann.com/gridworld/), I am unable to make that window appear. The IDE works flawlessly on other computers, and the issue only occurs on my computer at home. Can anyone help me out?

PubeHow much thrust does the Pube produce?no idea. it's not really about the power, it's a nice green eco-car, 100% recycled. it's made from old corsairs*
*old coarse hairs boom boom

Car and conveyance Issue

Similar Messages

Maybe you are looking for