Car charger/adaptor

Hi there, I have a lenovo flex and the caharger output is obviously 20v. I had a Tosh laptop before and I have a car Charger/ adaptor with a 18.5v 3.5a output. If I change the plug on the end of this to the square one for my Lenovo will the voltage be enough to run/charge the Lenovo laptop?

Check this out, MacBook Magsafe AC/DC car adapter

Similar Messages

  • Do they make a car power adaptor for air yet?

    where can i get a car power adaptor for my mac air 11 in?

    They do not. The Airline adapter they sell, will not work.
    You are best off just buying an 12v DC-120 AC inverter and using your existing AC Charger/adapter.
    http://www.sears.com/diehard-140-watt-power-inverter-with-built-in/p-02871522000 P?prdNo=4&blockNo=4&blockType=G4

  • AT100: can i connect external DVD drive & can I get a car charger?

    I recieved one of these when my friend bought a laptop.
    I have never used one before.
    I've read all the literature and surfed the net but I'm still a bit confused. Both a newbie and older I'm afraid.
    *1*-- I want to use it in the car for playing DVDs in the rear seat. Can I use the Toshiba external dvd drive?
    *2--*Is there a car charging plug/adaptor or anything?
    *3*--My stereo has bluetooth, USB and ipod access - what options are there for storing & playing music on the tablet via these
    *4*- Is wifi possible? I have it already connected to my wireless modem; would I need a separate modem in the car?
    Anything else I should know for maximising in-car use
    Anyone with the patience to help me it would be a much appreciated Christmas present.
    Cheers,
    Jeff

    Hi
    > *1*-- I want to use it in the car for playing DVDs in the rear seat. Can I use the Toshiba external dvd drive?
    No, you cannot connect an external CD/DVD drive to the AC100.
    The USB port supports the external USB HDD (FAT12/16/32/exFAT) and USB flash memory (FAT12/16/32/exFAT) for data copy.
    > *2--*Is there a car charging plug/adaptor or anything?
    Yes, google for AT100 Thrive car adapter. Otherwise you could order a comatibel part from ASP in your country.
    > *3*--My stereo has bluetooth, USB and ipod access - what options are there for storing & playing music on the tablet via these
    Take a look in Android market and search for Android HiFi app.
    But as far as I know if you want to stream a music from tablet to hifi equipment, both should be connected to the same network.
    > *4*- Is wifi possible? I have it already connected to my wireless modem; would I need a separate modem in the car?
    AT100 supports Wireless LAN

  • Nokia LCH-12 Car Charger

    I have a Nokia LCH-12 Car Charger. Can I use it for Nokia c6-00 charging with adaptor?

    it may or may not work depending on the adaptor you will have to test it yourself you wont do any harm
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Specifications for Car Charger

    I bought a USB Car Charger long before I got my Ipod, I now decided to try it out, but I just get the Ipod to power on, that means it recognizes that something is plugged in, but it doesn't recharge.
    The Car Charger has an output of 5.0V and could reach up to 400mA.
    Is the problem that it's not enough powerfull?
    Thanks

    Same question... what does the output need to be. Any suggestions for a car USB adaptor that is good to buy (I want the USB adaptor, not the dock adaptor for the car).
    Thanks,
    Tim

  • Pop port car charger

    Hi,
    I have a bluetooth handsfree kit (non nokia) for the car and would like to mount my phone (Nokia 6233) on the dashboard and have it charged whilst in the holder.
    This can obviously be done using a Nokia car kit but I do not need the full car kit (I already have bluetooth kit) just the holder and a pop port cable which goes from the holder to a power source in the car. I would prefer this to be hard wired than having an adaptor in the cigarette lighter.
    I have Nokia 6233 and would like to use the holder CR56.
    Can someone tell me what cable I need and where I can buy it.
    Thanks very much.
    Matthew

    All you need is an in-car charger lead, the cr-56 has a pop port connector and a charging connector on the bottom, us the same one as you would for your phone.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • My iphone won't charge and won't play music anymore. I have tried reseting it and switching it off. Have tried 3 different chargeres and even a car charger. Does anyone know what could be wrong and how I can fix it?

    I have an iPhone 4 not quite 2 years old. 2 nights ago my iPhone was on its charger and it kept vibrating as if it was being disconnected and re-connected from the charger. When I looked at it had an "error" message but now I don't know what that was as it was 3am and I was half asleep. I just diconnected the charger and the battery read fully charged.
    The my volume wouldn't go up or down. The box with "ringer" in it came up but no bars at the bottom to show the volume is increasing or decreasing. It would not play music out of the speakers either even though the screen showed it was playing and it would not work in our dock/speaker unless I used bluetooth and even then, if we touched the volume button on the dock it would switch off.
    I tried a "hard" reset 3 times and tried switching it off and on 3 times with no success.
    I tried 3 different chargers including a car charger, plus the speaker dock with no success.
    It is now out of battery and I cannot charge it.
    The iPhone also would not back anything up prior to the battery going flat.
    I just need to know if it is fixable or do I need to start looking for a new phone?

    Welcome to the Apple Support Communities
    See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

  • Is there a way to modify Incase Mini Car Charger so it will fit into iPhone 5s in a case?

    I should have read the reviews in the Apple Store before buying the Incase Mini Car Charger before I bought it: the material around the lightning connector is much thicker than that in the Apple cable (which broke after not much use) and won't fit into the 5s with the case I have on the phone. Is there a way to "shave" the rubbery material to make this work?

    dumdidadida: Thanks for your reply, but it doesn't address the problem. HSTS is designed to FORCE the use of https, this is a good thing in most cases. However, HSTS is problematic in that it incorrectly assumes that all users trust the default list of CAs and makes the adding of exceptions impossible even by advanced users.
    torprojec.org is just an example, this effects every HSTS site. You can reproduce this problem yourself in version 17 or later if you temporary disable "DigiCert High Assurance EV Root CA" in your certificate store and then visit torproject.org. You will notice the ability to add exceptions has been removed and that the cert_override.txt file found in the user's profile is also ignored.

  • Iphone 6 compatibility with belkin car charges and cables

    Hey
    upon reading stories of certain car charges not working with the iphone 6 i want to find out if either of these 2 car charges and cables from belkin will charge my iphone 6.
    In theory the 12v 2.4amp charger should charge my phone up faster than the rest however the iphone 6 is not listed in compatible devices, strangely neither is it listed on the 10w 2.1amp version of this product.
    Am i missing some sort of trick here? the only thing i can think of is that the iphone 6 has a list of compatible devices or (certified) and will not allow connection with either of these belkin devices.
    here is the 12v 2.4 charger http://www.belkin.com/uk/F8J121-Belkin/p/P-F8J121/
    Here is the 10w 2.1amp charger http://www.belkin.com/uk/F8J078/p/P-F8J078/
    What exactly is the problem with using either of these? isnt it the same lightening connection as the iphone 5?

    Belkin probably just hasn't updated the page yet. Give them a call or contact their customer support. Note that the maximum current an iPhone will draw from a USB adapter is 1 amp (5 watts) whether the adapter can supply 1 amp, 2 amps, or 100 amps. So it won't charge any faster than a 1 amp adapter. An iPad can use up to 2.1 amps.

  • Can I use my standard car charger i got for iphone 4 with iPhone 5? if I just plug in the usb to lightning cable or will it damage the new iphone?

    The charger takes a usb cable, so I figure I could just plug in my usb to lightning cable and charge using my Saitek charger.  Does anyone know if this works?

    Did you get this to work?  Mine did not work when I plugged it into my at&t iphone car charger usb port.

  • My Belkin car charger is no longer supported by my iphone 5. It was bought from the Apple store. Is there a solution from Apple?

    The Belkin car charger I purchased a year ago from the Apple store and has worked fine until recently  is no longer supported and will not charge my  iphone 5 it seems since IOs7 came in.  Is there a solution other than to have to buy a new one?

    are you talking about a song or a ringtone?
    either way, if its still on itunes you can just sync it back to your iphone.

  • IPod Car Charger - not charging

    I have a car charger made by Alpine that when plugged into my 5th gen iPod would connect it to my radio allowing me to play my tunes through my radio and it would also charge up my iPod. With my current iPod Classic, the charger/adapter does not charge up the iPod. Any reasons why this would not charge?

    While I don't know if this is the actual reason or not, I can speculate.
    Many USB devices can charge by just applying the power and ground pins of the USB port, so +5V and GND only need to be connected on the USB connector. However SOME USB devices are designed so that the two data lines also have to be hooked up. No data comes had to come across them, but the two lines need to be "active" in that they have a voltage on them (typically 2.5V) for the device to then charge off the power pins.
    Many USB charging devices, if they are not moving data, like ciggy lighter chargers, Wall AC chargers, etc. only hook up the power and GND pins and leave the data pins completely disconnected.
    It would appear the Classic, the Video Nano, the iTouch & the iPhone are different than previous iPods in that it may need to have the data pins "active" to charge. If you look at some of the chargers available from the Apple store, you will find that many will work with Minis, 1st and 2nd gen Nanos, 5th generation, 4th gen, etc. but NOT the 3rd gen Nano, iPhone/iTouch, or Classic while others will list all of them.
    Again, I don't know this for sure as I don't have any of the new products so can not test it, but I am guessing that is what the problem is. You might try contacting Alpine and see if they have any sort of fix for the issue, like a patch cord or replacement connector or something.
    Patrick

  • I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.

    I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

    martinfromdevon wrote:
    Warning to iPhone users.  Do not start the update of the iPhone software using iTunes.
    Nonsense, and very misleading advice.  I've updated iPhone 3G, 3Gs,and 4  through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones.  Of course, I've never jailbroken my phones either.  Hack your phone and have update problems?  I've got news for you, the problems are not a result of iTunes or Apple's updates.

  • I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginabl

    I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

    Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
    As per the forum term of service you can't get help here.  Use google.
    that's the downfall of jailbreaking your phone.

  • IPhone no longer works with car charger

    I bought this car charger and it worked for months, and when I got back from a road trip I got the latest iPhone OS update and now the phone tells me that "Charging is not supported with this accessory."

    Did the charger include the "made for iPhone" certification when purchased including for the 3GS?
    Your iPod Classic can be charged via USB or Firewire. The original iPhone can be charged via USB or Firewire, but the FireWire pins were removed from the iPhone's dock connector after the original iPhone which is also the same with all iPod models now. If your car charger charges via FireWire, this wouldn't work with the 3GS regardless. If a 3rd party device does not include the "made for iPhone" certification, this doesn't mean it won't work with the iPhone but having the certification ensures it - unless the device has failed.
    If there were something wrong with your iPhone, it wouldn't be charging when connected to your computer or to the wall charger either.
    If the charger includes the "made for iPhone" certification, contact the manufacturer. If not, purchase one that does.

Maybe you are looking for

  • Migrating data from 10.3.9 to Leopard

    I want to buy a new imac with Leopard but want to be sure that I can migrate data (iTunes, folders, software, etc) over from the old imac 1Ghz PowerPC G4 to the new. I've read that this is no problem from Tiger to Leopard using Migration Assistant bu

  • I can't update firefox until the update supports avast! and freecorder toolbar. when will that be?

    i keep getting reminders to update to firefox 5 but i will not update until firefox supports avast! and freecorder toolbar. when will these programs be suported?

  • BB OS 6.0 and Arabic Multitap issue

    Hi, I didn't know how to reach the blackberry OS 6.0 developers, so I thought it might be a good idea to post in this forum, and if there is a better place to ask for this, then please let me know. Most if not all Arabic users who use Arabic Multitap

  • 1 SATA + 3 IDE Config help please

    Hi, I have an 865PE - Neo2 - LS. Currently I have 1 SATA HD configured as the first boot device  + a CDRW and a DVD on IDE2. I would like to add a second standard IDE HD for some extra storage but try as I might I cannot get the bios to recognise the

  • New update, please help

    when is the next update?