Car charger does not work

Sorry, but I will only speak German. That is why my problem I write in German.
Hallo erst mal,
ich habe mir ein KFZ Ladekabel gekauft und an das iPhone 3G angeschlossen. Da bekam ich gleich die Fehlermeldung "Dieses Zubehör ist nicht für iPhone...". Wie ich von anderen Besitzern des iPhone 3G erfahren habe, ist dies auch bei anderen Zubehör Herstellern und Teile der Fall.
Da Apple ja kein KFZ - Ladekabel anbietet, gehe ich mal davon aus, das dies ein Fehler in der Software des iPhone ist.
Ich benötige jedoch dringend auch in meinem Fahrzeug eine Lademöglichkeit.
Kann mir da jemand weiter helfen?
Gruß Wollez

Hi i live in Germany, i will try in german
Ich hatte auch denn selber problem.Du must zum T-com Laden und einen Kfz Ladekabel von der firma GRIFFIN Kaufen (€19,99). Es geht dann mit der Iphone 3g.
Viel spass Bob

Similar Messages

  • BB Curve 8310 Home Charger Does not work, but Car charger charges Phone.

    Help !!!  Home charger does not charge phone.  But Car charger does.  But Home charger works with another curve.
    What can be wrong with the phone?

    Oddly, it could be the device USB going bad.
    Can you connect your Curve to your USB > PC and see the Curve connected in Desktop Manager?
    If so, do a complete back up of the device -- just in case it is the USB port ON the device going bad. It happens.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E7 USB Charging does not work when keyboard is loc...

    I have noticed that if the usb cable is connected when the E7 keyboard is locked, the phone does not charge.
    Is this a bug or an "undocumented feature"?
    Solved!
    Go to Solution.

    Just tested it on mine it charges without problems, btw I checked it by connecting to a PC in Ovi suite mode. I presume you face same problem using wall charger and PC USB charging. Restore it to factory settings and check(*#7780#), worth giving a shot. If it doesn't help take it to a Nokia care center.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Almost new battery won´t charge, does not work on AC

    After spending a few days in Taiwan (110V) the battery of my PB G4, A1138 won´t charge any more. Power connector lights amber.
    After coming back to Austria, i connected the PB for 2 days and it would charge again and worked proper. Now, 2 months later, the battery again refuses to charge, coconut battery & system profiler say that there is no AC power connector & battery is not charging. It won´t power up with AC connected. I did the PMU reset and PRAM reset - no effect.
    The battery is an original Apple replacement and has only 40 loading cycles. i´ve measured the voltage at the battery connector in the battery slot (3V & 6V depending on the pins), so the charger provides voltage.
    Can anybody tell, if the DC-in board is faulty or if it´s the logic board or something else?
    I´m thankfull for any advice!

    It's fairly common for the pre-MacSafe power connectors on the computer to loosen due to stress. The points where the barrel-shaped chrome connector assemble is soldered (or flowed) to the logic board lose contact and you get intermittent charing at best.
    If you connect to A/C adaptor and gently wiggle it up and down, can y ousee charging start again/ "Up" is the position where the contact should again meet.
    My 1Ghz 17" MBP will not start on A/C alone until the battery has a little charge. I don't know it's the dead internal backup battery (common) of something else that causes two good 65W power supplies to report in Profiler as 45W.

  • My ipod charger does not work. Why?

    a couple days ago I went to charge my ipod but when I plugged it in it would not charge. i thought it was my ipod but i used my friends ipod charger and it worked fine. so did my ipod charger break and where can I get a new one .

    Are you using a wall charger or computer?
    Have you tried another cable?
    Wall chargers and cable can go bad. You can purchese replacments from Apple or other places too.

  • My macbook pro charger does not work!! I have extended warranty/Guarantee from the store, do they exchange or give me a new one?

    Hi,
    There is a problem with my MacBook Pro Charger. It was working for a few months, but then it just doesnt work. My laptop doesnt charge!!
    I have an extended guarantee from the store, i got my laptop, does it apply Warrantee/Guarantee? There is no problem with my laptop, cause it charges all fine with my wife's charger!
    Thanks

    In as much as we here are not the store the best thing to do is bring it back and have them give you a new one. You should be most certainly covered under warranty. (As long as your dog didn't eat it).

  • HT1338 charger does not working

    what i have to do if during charging my macbook pro the charger stops working

    If you have AppleCare, give them a call.  If not, take your MBP to your local Apple Store or AASP.  Let them properly diagnose the problem and provide you w/a repair estimate for a new charger. 

  • The volume in the car does not work when i play music through me iphone but the volume works fine for the cd or radio

    When I use my iphone to play music in the car it does not work but the volume suing the cd or radio is fine

    Hello Vdayal,
    Thank you for the details of the issue you are experiencing with the microphone on your iPhone after upgrading to iOS 7.  I recommend following the steps in the article below for an issue like this.  Step 4 suggests restarting your iPhone, but if you click on the link, it offers the steps to reset your iPhone as well. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • "FOR REC IN CURSOR(PARAMETERS) LOOP" command does not work. Why?

    Hi to all.
    It's a pleasure to receive your help.
    In "FOR REC IN CURSOR(PARAMETERS) LOOP" command although the query return value does not enter the loop.
    Sounds simple, but I'm not seeing the flaw...
    Suggestions?
    Version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    Thank in advance,
    Filippe

    Filippe Soares Roza wrote:
    Hi to all.
    It's a pleasure to receive your help.
    In "FOR REC IN CURSOR(PARAMETERS) LOOP" command although the query return value does not enter the loop.
    Sounds simple, but I'm not seeing the flaw...
    Suggestions?
    Version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    Thank in advance,
    Filippe
    see a picture of my car that does not work.
    Tell me how to make my car go.
    How do I ask a question on the forums?
    SQL and PL/SQL FAQ

  • Audi Bluetooth does NOT Work After Update 8.02 and neither my car charger

    aAfter Update iOS 8.02 Bluetooth. Audi does NOT Work - Connection is ok bit cant talk with Connection
    and also The car charter does NOT work

    Hi Lars - I had the same issue - found the help on audi-sport.net - link:
    http://www.audi-sport.net/xf/threads/iphone-6-not-functioning-correctly-when-con nect-to-mmi.227675/
    see page 2 of the postings under veeeight's suggestion (7 steps).  Pasted from the forum.
    1. Rename your new iPhone
    2. Delete all Bluetooth phone pairings from the Audi MMI
    3. Reset All Settings
    4. Reset Network Settings
    5. Reset Network Settings again
    6. Connect to WiFi on your phone (optional)
    7. Do the pairing with the car again.
    I was able to resolve this on my 2011 A4 with MMI.  That's after I have updated my iPhone 6 with 8.0.2
    Hope this helps you and anyone else having the same issues.

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • Bluetooth on iPhone 6 does not work with car stereo

    I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
    When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
    1) Incoming calls show my own telephone number, regardless of who calls
    2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
    3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
    4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
    Hopefully this is soon to be solved! Or is there already a solution out there?
    Best regards
    Matt, Denmark

    My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install  on a Business standard radio set up with e snap in connector for the iPhone
    but not yet an iPhone 6 snap in
    You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
    To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also  plays audio
    The issue is usually with iDrive which BMW do have some issues with

  • I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

    I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

    Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app.  When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund.  I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

Maybe you are looking for

  • SM58 status text " No service for system SAPERP, client 800 in integr "

    In Idoc to file scenario: i have fallowed this blog to configure ALE settings /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi I have generated one idoc successfuly from sap r/3 system. but i didn't find

  • Exporting XML from PP CS6 to Resolve. Doesn't work no matter what we try!

    My colorist and I have been pulling our hair out trying to figure out how to get this project into Resolve. I am running the latest version of PP Cs6 on a Windows PC. Edited the feature in native R3D format, 4.5k, everything was smooth as silk. I pre

  • Web.show_document using javascript in Forms6i

    Dear all, I wnat to know in forms6i , is it workable calling web.show_document with javascript? As I face a problem that calling a url by web.show_document, but the requirement should not display the menu bar ... how can I do? Thanks in advance. JY

  • Container element value does not display

    Hi, I am facing a strange issue. There is one step in my custom workflow which sends sap mail. The subject of the e-mail has a container element &notif&. When I check the workflow log this container element gets set with a value just before this step

  • Best option connecting to VGA ?

    My wife's MBP has USB 2, Firewire 800, and Thunderbolt connectors. Need to connect to a meeting room's Projector with vga cable. Best way to do that? Thanks!