Car charger & playing at same time possib

Hi! I have a Zen Vision M 30GB,?and I use it a lot so it burns up battery life, so I was looking at the car charger and wondering to myself, if it's plugged in and charging will I still be able to plug it into my auxillary jack in my car and listen to it whilst it charges? I would figure that it would be possible since I can still navigate throughout the MP3 Player while it is plugged into my computer, but I thought I wouldn't want to be let down like the people who bought the 60gb and thought they were gonna have FM recording. :smileytongue:
Thanks
Message Edited by Legend_Of_Zelda on -6-2008 02:46 PM

I have a Creative car charger and use it with my Zen Micro. It plays while charging and is appreciated on long road tri
ps.

Similar Messages

  • Itrip and car charger at the same time?

    I've noticed that all the iTrips for the 5th generation video iPod connect via the dock connector at the bottom. Is it possible to use an in car charger and an iTrip at the same time, as they both connect via the same input?
    Thanks

    That is not possible, but they do make an iTrip specifically for the car. It chargers at the same time. Check Griffin's website.
    My friend hasa it and loves it. The charger actually helps the iTrip get a stronger signal.

  • Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

    Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

    Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
    NOTE:  You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

  • Can I charge by USB and play at same time?

    I take my ipod classic to work and charge through the USB on my PC at work. Can I play this at the same time it is charging? I can't seem to figure out how to do this but I hope I can because my battery doesn't stay charged very long anymore and would like to be able to play it while charging it. Any and all help is appreciated! Thanks. Gary

    Ron, got to work, plugged in USB for iPod, ejected and listened for a couple of hours with it left plugged into USB port. The whole time the battery was decharging and was half gone when finished so was not charging when listening. Any other ideas on how to listen to music and charge at the same time connecting by USB to a PC? Thanks. Gary

  • Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

    Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

    It is perfectly fine to use the phone while charging it.

  • Ipod nano (5th generation) - want to use headphones and charge at the same time

    I have an ipod nano (5th generation).  Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

    The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

  • Is it possible to record and play at same time in swift, is there a option to record without storing the file

    I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

    Its pretty simple with FMS. You just need to do following things:
    Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
    Video codec: H.264
    Audio Codec: <of your choice>
    Server ip: rtmp://<server-uri>/<app-name>
    Stream Name: mp4:<stream-name>.f4v
    Application : Server-side code
    application.onPublish = function(myclient,mystream){
         mystream.record();
    application.onUnpublish = function(myclient,mystream){
         mystream.record(false);
    Have a client , which subscribes in following live mode:-
    ns.play("mp4:<stream-name>.f4v",-1,0,true);   // this is subscribing in live mode
    In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
    Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
    But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

  • I added music to a project in iMovies. I wanted to delete the music I put in,but could not figure out how to delete the music. I also had two songs playing at same time. How do I delete music from project in iMovies?

    I added music to a project in iMovies. I wanted to delete the music,but could not figure out how. I also had two songs playing at same time. How do I delete music in project and how do I prevent two song playing at same time?

    Select your Music Track so that a yellow border is around it. Then hit the Delete Key. Alternatively, hit EDIT/DELETE SELECTION.

  • Connecting USB and Charger at the same time

    Hello guys, Is there any problem connecting usb and charger at the same time? after that, the Nokia Battery Monitor 2.0 shows 93% after full charge. Any ideia?

    yes, there is a male-female usb extension cable sold on computer store.
    Just pick up the length you need.
    But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
    Good Luck.

  • IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    Talk to your email provider. They control their servers and what happens to your email.

  • All Midi devices Play at same time help in resolving

    Environment:
    2 presounus Firepods,Oxygen 61, Yamaha DTX Exployer Drum Trigger, Panasonic SX KC-611 Keyboard, Logic Pro 8, Mac Book Pro, Mac OS X10.58.
    Question? How to get each midi device to be separate from each other so I can Play and record each device?
    I can get any one of the instruments to play fine by themselves one thru the USB Port, and the other two thru the Midi in and out of each fire pod, however when I hook all three to the system to play, them at the same time, each instrument will trigger the other two. Each is on a separate channel.
    Help

    Thanks for your reply, and my apologies for being unclear:
    I have the SWFs loaded into empty movieclips, one for each SWF, which are on each keyframe in the main timeline. The movieclip instances are named but the names aren't referred to in the actionscript. Doubleclicking the instances on each keyframe to go into their scene 1, and on layer 1, I've put the nextFrame() actionscript on the first frame, which is empty.
    So to load all of the SWFs into one movieclip, I now have all of the movieclip instances the same one on each keyframe, and the first keyframe has:
    loadMovieNum("firstanimation.swf", 1);
    followed by on the second:
    loadMovieNum("secondanimation.swf", 2);
    and so on.
    What's happening now is the first and third SWFs are playing at the same time and the second one isn't at all. Is what I'm doing wrong jumping out at you?
    Thank you

  • Using ipod and charging at the same time

    I want to know if i can use the ipod and charging it at the same time.

    Your iPod has to be on automatic update with disk mode off to be able to charge while using your iPod.

  • Slide Audio and Failure caption aduio plays at same time

    I have tried to read the many postings before I submitted
    this question. I am sorry if I am still not getting it.
    I have created a simulation and I am having trouble pausing
    the audio when the user clicks too soon (before the slide audio
    stops). When I am testing I will click the wrong area at the time
    the audio asks the user to click. (Basically I am clicking too soon
    on purpose just as some users might do.) When I click too soon in
    the wrong area the 'Failure' caption appears with audio. That is
    exactly what I want to happen. But the audio for the slide
    continues so I have two audios now playing at the same time. I am
    sure it is due to my option settings but which one?
    I have a slide with audio that plays for the entire length of
    the slide (7.7 secs).
    I have one click box on the slide set to 'Continue' on
    success. Displays for 4 seconds. Appears on the timeline at 3.7
    seconds and lasts for the duration of the slide. The click box has
    the following options selected: 'Failure' , 'Stop slide audio when
    clicked' , 'Pause project until user clicks' , 'Pause for
    success/failure captions'.
    The 'Failure' caption options are set to display for 5.6
    seconds (the client wanted audio instructions to guide the user
    when the user had the wrong response). The Transition is set to
    'Fade in and out'. Both 'In' and 'Out' are set to .5 seconds.
    How do I get the Slide Audio to stop? It does not have to
    resume just stop.
    Thank you,
    C

    Hi there C
    Firstly, apologies for the slow response, but, speaking for
    myself, I tend to not answer questions where I am not comfortable
    in giving the right answer. However, your plea for assitance has
    dragged me out of my shell, so here goes:
    My understanding is that on a click object, if you have
    selected "stop slide audio on click", then that object will stop
    the slide audio ONLY if the user clicks ON it. In other words, a
    click anywhere else will bring up the failure caption if this is
    set, BUT the slide audio will continue.
    Now, to sail into totally uncharted territory, there are 2
    things you could try/test:
    Insert a click box over the whole slide that "continues on
    success" but has your failure audio linked to it and enable the on
    success caption, but edit it to show as a failure caption. In other
    words, the user has clicked on this object incorrectly, therefore
    they need to see and hear the failure of having not having chosen
    the correct option. I would suggest that this click box displays
    for the rest of the slide, but sits below your original box on the
    timeline.
    The second option is to set your original click box to
    navigate to a duplicate slide on failure that does not contain the
    slide audio, but is then set up as your "failure" slide with a
    slide navigation back to the original slide after the audio has
    completed. If you choose this option, then it might be a good idea
    to have your failure text and audio include something like "let us
    try again" as the original slide will start playing from scrarch
    again.
    Please let me know via this post if this helped or not!!
    Luck
    Andrew

  • Listen and Charge at the same time?

    Can I listen to the Nano and charge it via the USB port at the same time?

    I'm having the same problem. I want to listen to my nano at work, but it needs to be charged. If I eject it from iTunes, the battery no longer charges.
    I'm using a W2K PC, let me know if you need any other info. This is very frustrating.

  • Songs from multiple apple accounts can't play at same time on same login

    I have two iTunes accounts for purchases. I used to be able to play all songs purchased regardless of account used on my iTunes and my iPods (we have 4). Now, with the 7.0.1 update I can only play tunes purchased from one account or the other.
    I need to be able to play purchases from both accounts on the same computer and iPods. How do I do this? Can I have multiple authorizations on one computer?

    While we can have multiple authorizations, under version 7.0.1 we can't play songs or videos from one account when the other is logged in. In prior versions of iTunes it didn't matter. Plus we can't seem to play songs or videos from more than one account on our iPods, Nano, or Shuffle
    We have two accounts, one for US purchases and one for French purchases. But I can also see unmarried couples with one computer having separate accounts and so on. So this is a big issue that should not have occured. It doesn't make sense to have one "household" account for all purchases vs. individual accounts with shared access from one computer.
    I'd really like to see a resolution to this issue.

Maybe you are looking for

  • I am trapped in Warranty He!! my laserjet is broken and I cannot get any help

    I have never had an experience like this one, except with my dell m1330, but I digress.  I have an M1319f MFP.  I purchased it on march, but last week the fax died.  I did not have the original receipt in my possession, but the HP website said my war

  • Imac G5 won't start with Isight plugged into the firewire port.

    I went to turn on my Imac today and it wouldn't start. After checking all the usual culprits (power strip, outlet and power chord) which were not the problem, I proceeded by unplugging all the external devices from the back ports. After unplugging th

  • Small issue with custom table cell editor and unwanted table row selection

    I'm using a custom table cell editor to display a JTree. Thing i notice is that when i select a value in the tree pop-up, the pop-up closes (as it should) but then every table row, from the editing row to the row behind the pop-up when i selected the

  • Pixel text over opacity fill

    Hello, I have text on top of an 85% opacity white fill.  When I save as an eps the text gets pixelated when placed in InDesign.  It doesn't happen all the time.  When the InDesign file gets exported as a pdf I can open the file in Illustrator and I'v

  • [svn] 2169: Add a new proxy adapter for code coverage.

    Revision: 2169 Author: [email protected] Date: 2008-06-20 12:53:04 -0700 (Fri, 20 Jun 2008) Log Message: Add a new proxy adapter for code coverage. Modified Paths: blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml