Car compatibility with 2015 Mazda 6

I have recently purchased a 2015 Mazda 6 Grand Touring and am very pleased with the vehicle. However, it was not until I attempted to set up the messaging feature that I realized my iPhone 5 is not compatible. It will play bluetooth music and will make and receive phone calls via bluetooth, but the car was advertised to me as having a feature that read text messages/email to me and would allow me to respond verbally (a big selling point for safety and practicality). I then checked the phone compatibility guide and iPhone 5 on iOS7 is not compatible. Does anyone know if iOS8 or iPhone 6 will be? I hate to leave the iPhone/Apple community that I've been a part of for so long, simply because it is not compatible with my car, but the car is the larger, more permanent purchase and I'd like it to function with all features. My phone contract is up shortly and I need to make a phone decision. For the record, all of the Android phones I have researched are fully compatible with the car.
I've visited a variety of Mazda forums, which all have outdated responses and no new information regarding the 2015 car models nor the IPhone 6 or iOS8. Any help would be greatly appreciated.

Check out this link http://www.youtube.com/redirect?q=http%3A%2F%2Fforum.mazda6club.com%2Felectrical -lighting-audio%2F302129-head-unit-swap-2014-mazda-6-grand-touring.html&redir_to ken=ArktKzrOHHD3i6SJYb7eQGYJyr18MTQxMTQyMzcwNkAxNDExMzM3MzA2  Maybe there is hope yet.

Similar Messages

  • SATA11 is it compatable with all controller cards

    I want to add 500gb HD's to my G4 Giga and know I need a SATA controller card, I am considering this one card pic is this card compatable with SATA11 hard drives?
    Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW   Mac OS X (10.4.9)   wireless network

    Thanks Japamac, can I go through this deadhead style...
    You can install as many OS's as you want. When you
    set your Startup Disk Preferences, you are able to
    select the OS that you want, as well as the disk that
    you want.
    Does this mean I have to make a partion thing on the same disk for each (even the same) OS?
    Do I use the original install disks to do this?
    Another way to select startup disk/OS, is to boot
    while holding the Option key. This will open the
    Startup Manager, and allow you to select which and
    where you want to boot from.
    This is the screen I remember from my Apple Care Plan Help Desk days
    It is a good idea to have a second (and third)
    bootable disk in your system.
    Is the third disk on a partion thing ( I have researched this and have found, using "disk utility" I can make "partitions", if I understand correctly, my machine will "see" a partition as a separate disk, am I miles off?
    That way, heaven
    forbid, should one disk have trouble booting, you can
    use the Startup Manager to select an alternate disk,
    and then diagnose and repair the ailing disk from
    there.
    Do I use "disk utility" from another partition disk to do this?
    This is, actually, a very important thing to
    have in your system. by all means, install the OS on
    the other disk.
    A partition on the 120gb, how big should the partition be?
    Remember, to keep both disks backed up. So, don't
    give up on your external drives all together. They
    are VERY useful.
    This is where you are going to hate me... I dont have any externals or back ups.... this is why I am trying to work out what to do... I back up my photo's to DVD when I have enough, its not good practice because it can take a months worth before I have time to physically go through all the work to decide what I will archive to DVD, I would love for all of the work to automatically copy itself to a safe place.
    While we are on the subject, a very good way to
    backup, is to use Super Duper. This is a clone
    utility. SD will copy bit for bit, your drive, and
    then make that backup bootable. This is a very nice
    feature. Also, after that, you can use the Smart
    Update feature, which updates any changes of a volume
    to it's clone. This way, you always have an exact
    copy of your system and data. Invaluable!
    This is obviously what I need... I will download it and try to understand its functions
    I like OWC, myself. Even with shipping and tariffs to
    Japan, it is most often cheaper to do so. Also, the
    company is very reputable, has great service (try
    their live chat) and stands behind what they sell.
    OWC also has lots of install tutorial video (and
    PDF's) in their support section. Check it
    out.
    I have trusted OWC since you recommended them for my processor upgrade and have just ordered the SATA controller from them and am going to get a 500gb internal HD for now until I can learn to rationalise my disk space... at the moment my files are just copies of themselves on the same disk (120gb)
    Hey Japamac... I have to say thank you to you sir, you have obviously put a lot of time and effort into your reply and I really do appreciate it...
    As Arnie says.... "I will be back"
    G4AGP(450)Sawtooth,
    2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon
    9800   Mac OS X (10.4.8)   Pioneer DVR-109, 23" ACD,
    Ratoc USB 2.0, QCam Ultra, Nikon Coolscan
    Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW   Mac OS X (10.4.9)   wireless network
    Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW   Mac OS X (10.4.9)   wireless network

  • 2015 mazda cx-5 bluetooth issues

    I just purchased a 2015 Mazda CX-5.  I have an iPhone 6 and every time I get into the car, the bluetooth downloads my phone contacts.  Shouldn't it remember my contacts?  Why is it having to download every time?  It's annoying to have to wait for this to process before I can begin making a call or listening to music.
    Any help would be appreciated.  Is this a Mazda issue or an Apple issue?

    I think it's because they changed the location inside iOS that holds the messages.  My Chevrolet use to read mine until iOS8

  • How can I turn off compatibility with 7.1 when labview 8 converts my 7.1 code?

    Hi,
    I just loaded LV8 on my mac. It converted/compiled my app code to 8. While doing that, it changed many of my constants to hidden controls to maintain combabtibility with 7.1. I really don't care about 7.1 anymore. Is there a way to turn this off so I can re-compile the code and keep it the way it is?
    Obviously, I am new to LV but I don't see a reason for keeping the compatibility with 7.1 if my lab is going to 8.
    Any thoughs, comments, or critisims would be appreciated.
    tarek316

    The particular issue you're talking about isn't necessarily "compatibility" with LabVIEW 7.1...it's actually ensuring that your VIs behave the same in 8.0 as they did in 7.1.  As described in that dialog box, a change was made in LabVIEW 8.0 regarding how VI diagrams are compiled in regards to Case Structures with cases that will never run.  If you are using case structures with constants wired to their selectors purely to keep VIs in memory at particular points in your code, then you should heed the advice given in the context help for the created control and use a Static VI Reference in your code instead of a subVI in a case structure.  If you are using case structures with constants wired to their selectors to comment out code, perhaps you should use the Diagram Disable structure instead.
    -D 
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Anybody using a USA Spec (or any brand) car connector with your iPhone?

    I am interested in purchasing the USA Spec PA11-GM connector to integrate my iPhone with my '04 Tahoe. Their website claims compatibility with the iPhone, but I am curious if anyone out there has tried it.
    If so, does the warning about an unrecognized accessory come up when you connect your iPhone? How does the phone function when connected . . . can you hear the caller through your stereo speakers? Are there any drawbacks?
    I'm open to any other brand of car connectors also. The FM transmitter just doesn't do it for me. I'm looking for a direct connection to my car stereo.
    Thanks.

    I have used the iPod on my iPhone a few times with my JVC head unit through an aux input adapter. It sounded o.k. After I turned off the sound check in the iPod settings, it was loud and sounded great.
    I have yet to receive a call when it was connected. Maybe I should try it to see what happens.

  • Propellerhead Reason 3 compatibility with Snow Leopard?

    Before I buy the Snow Leopard update, I want to make sure of compatibility with a few of my apps. I know there are compatibility lists out there but I can't find any specific mention of Snow Leopard's compatibility with Propellerhead Reason 3.
    Can anyone with Reason 3 who has taken the Snow Leopard plunge let me know if there were any issues?
    cheers,
    Ian

    Propellerhead just released a new version (this week) - I wonder if earlier versions will not even be considered to be Snow Leopard-compatible.
    Totally off-topic, I talked to the folks at Carbonite this afternoon. They have a very popular Windows backup scheme - and recently released a "dumbed-down" version for Mac (lacking backup scheduling, and other important-to-many features that are in the Windows version).
    "We haven't tested Carbonite for Mac under Snow Leopard yet ... " - was the first statement made by their representative.
    This attitude just made me wonder: Authors of US$19 little utilities have released Snow Leopard-compatible versions this week, so Apple allows publishers of all sizes to get into the beta process. But why would several MAJOR applications not care enough to get their collective acts together for us?
    And so it goes. I am off to a local retailer, who's opening up at a minute past midnight to sell Snow Leopard for a couple hours tonight.
    Clint Bradford

  • SCOM database compatibility with SQL 2014

    Hello Experts,
    We are finally upgrading from SCOM 2007 R2 to SCOM 2012 R2. Currently we have our DB's on SQL 2008 R2. I would like to know if the SCOM DB is compatibility with SQL 2014.
    Thanks in Advance.
    Regards,
    Prajul Nambiar

    Hi,
    With UR5 SQL2014 is now supported
    Support for SQL Server 2014 with System Center 2012 R2 Update Rollup 5
    http://blogs.technet.com/b/systemcenter/archive/2015/02/23/support-for-sql-server-2014-with-system-center-2012-r2-update-rollup-5.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • IPhone6 bluetooth glitch with 2015 Nissan??

    iPhone 6 with 2015 Nissan Rogue SL
    Everything works fine except when connected I can hear the other caller but the caller cannot hear me?? Problem is on both incoming and outgoing calls. Any solutions??

    If the phone is paired the sounds usually routes through the car speakers. Is the car speaker volume turned down?

  • Verizon Phones compatable with Ford SYNC

    I am new to this forum. I fact I have never used a forum before.  I am over 65 and do not understand how the forum is related to asking Verizon a question or offering a suggestion. But here goes:
    When I go to the Verizon home page and queery Ford SYNC I get no results.  I suggest  that Verizon address Ford SYNC on its site.  Specificially address which phones are compatable with Ford SYNC for 2010 and 2011 vehicle being produced by Ford.  (Edge/Explorer)
    I guess my main question is:  Just because a phone has bluetooth capability is it compatable with FORD SYNC?

    shadowdog3 wrote:
    By reading comments and experience with Verizon. I'd say it's Verizon's problem. The company is the most technologically lame entity I've seen. These guys refused the iPhone! They have least technologically advanced phones on the market. Where are their dual-cores? I have the htc Thunderbolt-Horrible!! Ha, what a waste of hundreds of dollars. I want my money back...
    the iphone ends up costings carriers money
    verizon doesn't make the phones or the car
    verizon has plenty of dual core phones
    you have a phone that is 13 months old, in this industry that is a dinosaur

  • How can I create a new Care Plan with one or more care tasks

    Hello,
    I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
    Following code works fine:
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    this.PersonInfo.SelectedRecord.NewItem(plan);
    It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
    https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
    Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
    https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
    So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
    <tasks>
    <task>
    <name>
    <text>Run 100 miles</text>
    </name>
    <description>Run 100 miles in 6 months</description>
    <start-date>
    <structured>
    <date>
    <y>2013</y>
    <m>12</m>
    <d>1</d>
    </date>
    </structured>
    </start-date>
    <end-date>
    <structured>
    <date>
    <y>2014</y>
    <m>6</m>
    <d>1</d>
    </date>
    </structured>
    </end-date>
    <target-completion-date>
    <structured>
    <date>
    <y>2014</y>
    <m>12</m>
    <d>31</d>
    </date>
    </structured>
    </target-completion-date>
    <sequence-number>279128532</sequence-number>
    <recurrence>
    <interval>
    <text>Once</text>
    </interval>
    <times-in-interval>10</times-in-interval>
    </recurrence>
    <reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
    </task>
    </tasks>
    Any help is welcome 
    Wilfred

    Hi Wilfred,
    Have you tried this?
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    plan.Tasks.Add(someTask) 
    If you have a task list already, you would need to enumerate through it and add one by one...
    foreach (var task in existingList)
        plan.Tasks.Add(task)

  • Windows 8 and itunes 11 compatibility with an ipod

    I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8.  This was months ago.
    I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
    I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
    If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
    Kia
    [email protected]

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Is adobe photoshop cs2 compatable with windows 8?

    Is adobe photoshop CS2 compatable with windows 8?

    I have removed and re-installed CS2 twice now and still get the same library application error.
    DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
    Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
    Thank you,
    Eric

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

    i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
    i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Maybe you are looking for