Car connection using USB cable

When attempting to connect phone to stereo using USB cable get message saying USB not recognised ??

If you have content on the SD Card you can change to Mass Storage mode to get this to work: Main Menu > Settings > Xperia Connectivity > USC Connectivity > USB Connection Mode > Mass Storage.
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • TS3274 How can I connect tv to ipad?  Want it to use netflex but will not connect using USB cable.

    How can I connect tv to ipad?  Want it to use netflex but will not connect using USB cable.

    http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
    You should find a solution here

  • Macbook does not recognize iphone 5s when connected using usb cable that came with charger

    I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
    Does any one have any solution for the problem

    iOS: Device not recognized in iTunes for Mac OS X
    BTW, this is the Mac Pro desktop forum

  • HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

    HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

    First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
    Since you use the term "PC," are you using an Apple computer or something that is Windows based?
    Barry

  • Connecting DSL Modem Using USB Cable

    Recently, my DSL modem (Westell 6100) has stopped working. The Ethernet light blinks despite a change in cable. Thus, I would like to attempt using the USB connection. According to this article and this article, the drivers are on the Installation CD, which I mentioned in a previous post I have.  Could you tell me where on the CD the USB drivers mentioned in the articles are located and how to install them? Also, the articles give contradictory instructions. One states to connect the USB cable to the computer prior to installation, while the other article states not to do so until told to do so.  Any help would be greatly appreciated. Thank for your time and help.

    Hello GMRamirez,
    Thanks for utilizing the forums to get answers! We appreciate you reaching out to the community. You are correct, one of article does mention not to plug in the USB cable to the computer until you are ready to install the USB drivers (and hence make use of the USB cable). The other article merely states that the USB cable can be plugged into the modem end of the connection (In essence leaving the end that would go to the computer free and unplugged) . So although they are refering to the same USB cable, they're talking about different ends. Hope this clears it up for you!
    Running the installation CD should provide you with a menu or options list where driver installation can be selected. Follow the onscreen instructions to facilitate this and you should be go to go. Good lucK! We're here if you have any other questions.
    ~Francis

  • Connecting N95 to ovi suite using usb cable

    I have just upgraded to windows 7. I installed pc suite and ovi suite just like i had before on windows XP. However when i try connecting using ovi suite and choosing the option of pc suite on the phone when connecting the usb cable i keep, ovi gives me the message "Please wait while USB drivers are installed on your computer" and stays in this state like for ever. I didn't have this problem before when using windows XP. Please help me
    Attachments:
    ovi_n95.jpg ‏302 KB

    I've had similar problems, but wait for the drivers to install, also sometimes my phone won't connect straight away, pulling the usb cable out of the phone and pushing it back in again quite quickly usually gets the connection to work ok !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • My Macbook is getting freeze when i connect with USB cable

    After I updated to OSX 10.7.4 Lion (Default 64bit).I try to use the touch panel device that I using before. But it keeping occur system freeze when I connect the usb cable.
    Sometime I can operate it normal but the percentage is very low.
    What 's the problem on?

    Could be a bad cable or the device isn't compatible with Lion and it is causing problems.

  • My MacBook Pro shuts down when i connect a USB cable.

    My MacBook Pro shuts down when  i connect a USB cable, only when its a 30 pin apple cable. Well one USB shuts it down and the other one doesn't work at all.
    it only happens when i use an apple cable. It has no problem with my external drive nor with other things.
    Ps. i did use different apple cables and they all shut it down.

    What are you connecting? iPad, iPhone, what?
    When you say a 30-pin Apple cable do you mean a Lightening to USB cable?
    Little more info needed...
    Clinton

  • Error connect to USB cable

    I purchased nokia n8 before 3 months ago now for last 2 weeks i am getting error connect to USB cable.and the charge of battery finish quickly..
    please help to solve the problem

    Default lock code is 12345 unless altered by user and if forgotten can be reset by any Nokia Care facilty, although proof of ownership would be required.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HP laserjet 6L connected thru USB cable printing problem

    System Board ASUS M3A78-EM does not have LPT port on mother board.
    Printer Model : HP Laserjet 6L Gold (Old printer) Connected thru USB cable (LPT to USB/USB to LPT)
    O/S  Windows XP
    Driver installed automatically and port selected USB
    Previously it was working fine but now a days, I am not able to print clear text on output.. It prints some words in italic, some of half italic, crucked letters. If I start my PC with printer switch off. When ever required printer, I switched ON printer and give command to print. It displays many time "printer failed to print this document". After reboot the system with switched on printer message does not displayed.
    Can any one help to reolve this problem of uneven printing letters.
    my email id is {Personal Information Removed}

    I found this advice on another site:
    "You will need to install drivers for your usb serial adapter, A good way to find which drivers to install (if u dont have them) is to click the apple Icon on the top left, 'about this mac'then click the 'More Info' on the window which appears, then look for USB devices.
    Your serial adapter should appear as a usb device, THen google for the os x usb drivers for the chipset/adapter, or contact your vendor/look on sourceforge for it."
    I don't know if that's the problem, but you should have gotten a driver disc with the converter cable. The one I just received for a pc client has a CD that says it's for Windows and Mac.
    One problem though, the disc is a mini-cd. Not great for slot loading drives, and the driver says Mac 10.1 - 10.3.3. Maybe that's when they made the cable, but I wouldn't be very surprised if it didn't work with Leopard. It's going on a PC so I won't have to worry about it for now.
    Side note about these cables - I have another client who wanted to control his ham radio gear from a Mac running WinXP on Parallels. It wouldn't work in WinXP until I removed the driver from the Mac side. Windows kept complaining that the device was already under control by another program - it meant Mac OS. I'm not sure how I would have been able to make the device work both ways, but luckily, didn't have to find out.
    Leopard saw his Radio Shack cable fine from System Profiler.
    Message was edited by: dechamp

  • Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

    iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro    

    Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

  • TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

    My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

    Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable?  It might not also hurt to connect it to another USB port as well.
    Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
    Putting iPod into Disk Mode
    B-rock

  • My mini iPad is now not working . just showing iTunes sign and to connect to usb cable.

    my mini iPad is now not working . just showing iTunes sign and to connect to usb cable. I have done that buy macbook is not discovering iPad as a device.  Any ideas ?

    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
    Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
    http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
     Cheers, Tom

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

Maybe you are looking for