Car keeps thinking I am starting a call since upgrade to iOS 7

Since upgrading my iPhone 4s to iOS 7 my car keeps thinking I am starting a call every time I receive a SMS or email etc.  I have a 2008 Audi with the standard MMI.  Anybody else experiencing similar issues?

I have a very similar issue with my Merc bluetooth.  It keeps switching between the iphone, bluetooth and speaker. Will then 5-6 minutes later start making a call I dialled into my dash phone numbers.  I have tried forgetting device and re-installing but to no avail.  The same issue happened with the upgrade to IOS6 .  I have honestly started thinking of going to an alternate phone.  It's crazy that every upgrade results in the phone not being compatible with the bluetooth.  Merc certainly don't miss you if you need to get a software update either!!  It doesn't make sence that they cant make the upograde compatible with the bluetooth devices and that the bluetooth devices need to constantly update for Apples changes?!?!? Not happy!!

Similar Messages

  • I cannot place or receive calls since upgrading to ios 6.

    Sprint is my carrier.  I upgraded 2 iphone 4s and neither one will place or receive calls.

    I found the solution posted by cocomarie.
    Dial ##update# and push talk. It will give you a message that it is updating something then when it's complete the phone will work.

  • My iPhone 4 randomly drops inbound and outbound calls since upgrading to iOS 5.1.1

    Can the iOS be "wiped" and reinstalled?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

    I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

    After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
    I continued to use the phone on EDGE mode for two more days until the problem was fixed.
    I even got a call back from a tech support guy asking me if my phone was working properly....
    I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

  • Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • Can't start xbmc.service since upgrade to xbmc 12.3-10

    Hi,
    I normally start xbmc via a service file and do not use a login manager, and have done successfully for some time now,
    I can no longer start xbmc.service since upgrading to xbmc 12.3-10
    The errors I receive in the journal are:
    Feb 27 10:52:20 wolverine systemd[242]: pam_nologin(login:account): conversation failed
    Feb 27 10:52:20 wolverine systemd[242]: Failed at step PAM spawning /usr/bin/xinit: Operation not permitted
    Looking at the old and new xbmc.service files, the new xbmc.service now has an additional line specifying "PamName=login"
    Not sure what I need to look at to fix this, any ideas are much appreciated.
    I am temporarily using the old xbmc.service file from the xbmc 12.3-9 package to ensure xbmc starts.
    Thanks in advance for any help.

    Thought I'd chime in here, as I'm having the same problem.  I am using the default service file provided by the xbmc package.  Commenting out PAMName=login in xbmc.service allows xbmc to start successfully on boot.  If I start xbmc.service from a normal shell prompt, it will start fine even with PAMName set.
    cat /usr/lib/systemd/system/xbmc.service
    [Unit]
    Description = Starts instance of XBMC using xinit
    After = remote-fs.target
    [Service]
    User = xbmc
    Group = xbmc
    PAMName=login
    Type = simple
    ExecStart = /usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp
    Restart = on-abort
    [Install]
    WantedBy = multi-user.target
    systemctl -l status xbmc.service
    xbmc.service - Starts instance of XBMC using xinit
    Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
    Active: failed (Result: exit-code) since Fri 2014-02-28 10:56:50 EST; 42min ago
    Process: 205 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp (code=exited, status=224/PAM)
    Main PID: 205 (code=exited, status=224/PAM)
    CGroup: /system.slice/xbmc.service
    Feb 28 10:56:49 zbox systemd[1]: Starting Starts instance of XBMC using xinit...
    Feb 28 10:56:49 zbox systemd[1]: Started Starts instance of XBMC using xinit.
    Feb 28 10:56:50 zbox systemd[1]: xbmc.service: main process exited, code=exited, status=224/PAM
    Feb 28 10:56:50 zbox systemd[1]: Unit xbmc.service entered failed state.
    cat /etc/pam.d/login
    #%PAM-1.0
    auth required pam_securetty.so
    auth requisite pam_nologin.so
    auth include system-local-login
    account include system-local-login
    session include system-local-login

  • Having trouble downloading contacts to phonebook on sync system in my car since upgrading to IOS 6.0

    Since upgrading to IOS 6.0 I'm having problem downloading my contacts from my iphone to the phonebook on my Ford Sync system. I can make and receive calls but the phonebook is empty even though the system tells me it has downloaded phonebook.

    A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
    How to move your data to a new Identity
    BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
    Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

  • My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    Hi jhatlanta, 
    I understand you are using a cellular iPad 2 and since upgrading to iOS 8 (and 8.0.2) your iPad drops the cellular connection and says, "No Service".
    So you have done step 5 in this list, but please test the other steps.
    If you see No Service in the status bar of your iPhone or iPad
    If you're in your carrier's coverage area
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Best Regards,
    Nubz

  • Since upgrading to ios 8 from ios 7 on my ipad i keep getting the annoying certificatepop ups. Is there anyway to eliminate them? Its more of an inconvinience to keep having to close them.

    Since upgrading to ios 8 from ios 7 on my ipad i keep getting the annoying certificatepop ups. Is there anyway to eliminate them? Its more of an inconvinience to keep having to close them.

    Check to make sure that the year, date, and time are set correctly on your iPad.

  • Emails keep disappearing off my iPad 2 even unread ones only started doing this since upgrade to os5

    Emails just disappear off my ipad2 even ones I have not read, they don't even go into deleted they just vanish which is really weird as only started happening sine os5 upgrade please help as I can't work remotely with iPad when put and about.

    Try reset iPad. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

  • Can't hear or be heard on phone calls after upgrading to ios 5

    I recently upgraded my iphone 4 to ios 5 and afterwards my phone calls are mute.  Caller can't hear me nor can i hear them.  Blue tooth device only transmits music, no calls.  I have restored my iphone from the back up and also as a new phone with out any luck.  Any suggestions?  Thanks.

    Well after going to the apple store with no luck they referred me to apple care. They said even though my phone is out of warranty, upgrading to ios 5 screwed it up so they will place it back under warranty. This allows me to get the phone replaced at no cost. The new phone should be here tomorrow and I just send in the old one with pre-paid shipping. Give apple care a call.

  • Why does my ipad 2 keep dropping the connection to my BT Home Hub, whilst streaming video, since upgrading to IOS 6?

    Ever since i have upgraded to IOS6 My connection to my BT Hub 3 wifi router keeps dropping out whenever i am streaming video. I have an Apple TV connected as well which is fine as are other devices, its just the Ipad since the move to IOS6. It is really frustrating and i had hoped the 6.01 release would have resolved it, but it didnt. I have seen other similar comments, i just want to know if this is a common known fault which Apple are going to fix.
    The strength of Apple has always been 'it just works' , i can't help but feel that there are cracks appearing in this.
    David

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problem with loading contacts into my car's phone book since upgrading to IOS 6

    SInce upgrading my 4S to IOS 6 the only contacts that will upload to my 2011 car are those contacts listed under Favorites.  I'm presuming its an issue with ios6. Has anyone experienced the same problem and can offer a fix? 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS3406 Has anyone else experienced frequent dropped calls since the latest IOS upgrade?

    I have experienced dropped calls since I upgraded my IOS a few weeks ago. Anyone else having the same problem?  AT&T blames Apple, Apple blames AT&T, I'm stuck in the middle.
    HELP?!?!?!?

    I'm with ATT and no.
    I had a dropped call not long ago and it wasn't due to my iPhone or ATT. A friend with Sprint tried to call me while driving through a known low reception area with Sprint. Sprint dropped the call.

  • Asked to Sign-in to iCloud every time I start my Mac since upgrading to Yosemite

    Since upgrading to Yosemite every time I start my computer it goes through the normal grey screen stage and then I get to login as normal. After logging in I then get asked to sign-in to iCloud. I sign-in successfully and agree to the terms and conditions, choose to upgrade to iCloudDrive and then it says setting up my Mac, which takes about 20 seconds before the desktop displays. I'd expect this behaviour on the first reboot after installing Yosemite but it's asking me to sign-in to iCloud every time I restart and taking me through all these steps!
    I'm on iMac, Late 2012, 2.9 GHz Intel Core i5, 8GB

    Just to say I never found a solution to this after hours of looking for answers and trying different things. I finally decided to take the plunge and reformat my hard drive and reinstall OS X Yosemite and now is all good on this front.

Maybe you are looking for

  • Itunes using Airport Express 802.11n and Remote app no longer staying connected

    I'm running Windows 7. I find that my Remote app either keeps dropping Home Sharing (unless I toggle Home Sharing off/on in Itunes) or if it finds my library it cannot open it through the app. I can play music through my Airport, but it's the remote

  • Kernel Panic Mac Pro Mid 2012

    Hi, It's been several nights that I have a dozen kernel panic on my Mid 2012 Mac Pro and during the day there is no problem. I'm hoping someone can help me identify what may have caused it. Thanks for looking: Processor  3.33 GHz 6-Core Intel Xeon Me

  • Ati radeon hd 8510g

    Hello forum , Iv got this problem with battery drain and i saw a post on the forum about uninstalling your graphics driver and reinstalling it. The problem is that when I reinstall my driver my screen goes from dark to light to dark to light and so o

  • Jumpy mouse cursor: bug in Acrobat 10.1.12?

    Is there a patch or fix for erratic mouse (jumpy cursor) at the edge of an Acrobat application window? When I move the cursor over any of the four sides or edges of an open window without clicking, the cursor jumps back and forth over the edge/border

  • Creatin crucial report in web analysis

    Hi,Experts Here is an interesting issue.we have Actual and Forecast data. In generating the reports using web analysis for one crucial report.we have version number which is a memebr of version dimension.Based on the version number selected,it must s