Car kit software updater

Can someone give me a definitive link to the car kit software updater? Looking on the support site I can’t find anywhere to download it.  Also looking through these forums people have put links like http://europe.nokia.com/support/product-support/nokia-ck-200/car-kit-software which just links to
http://www.nokia.com/gb-en/support/
If there are different updaters for different versions mine is the CK-200.
I tried to use the Live Help but the help I got was less than helpful.
Regards
Chris

I'm having the same problem.
The Nokia sites, accross a number of countries, all draw blanks.  Googling "car kit software" updater has results but they all lead nowhere.  It's as if all the copies on the internet have been deleted.
Nokia support in Australia has been a frustrating and unfruitful exercise.
All help greatly appreciated :-)

Similar Messages

  • Nokia care Belle software update

    To put it bluntly, I would like to know how long would it take for Nokia Care to update belle to my N8?
    Being a pre-order customer for the N8, I also had a faulty unit which was replaced and has the code 059B656. Althought I think it is unfair to make us go to nokia care just to get the update considering we were one of the first to purchase the n8.
    What's done is done. I don't have good experiences at nokia care and prefer to do things on my own. The bottom piece of my N8 broke early on and a replacement was supposed to take 3-4 hours. I insisted if it takes that long just provide me the new piece and I'll install it myself. Well after some hassling they managed to get it done in 1 hour. To unscrew the broken piece, screw in a new piece and a bit of paper work and putting things in the parts bin (I assume).
    My friends N8 took 2 weeks to come back from a swap, mine took 1 week to come back from a swap. I'd rather not be without my phone. A simple thing such as a software update I hope someone from Nokia can guarantee maximum of 1 1/2 hours to install provided there are not many customers. I am a tolerable person.
    what's done is done. Lets move on to the most critical question:
    Has anyone updated their N8 to belle at an NCC yet? Please highlight your experience.

    Well, I was in a jolly mood and planned my day around the expected 3 hours. So sent in my N8 first person as it opened at 10am. Sat at starbucks for 3 hours doing my work thanks to long life of the asus notebook. Collected at 1pm. Belle is now on my phone. I'm worried now, what about other updates? Will the swap unit still be able to do OTA and Nokia Suite updates? My wifes unit is not a swap unit and recently had important updates to her phone, of which I didn't have any.
    I sure won't want to lose another 3 hours + few more hours restoring apps and data for future updates.

  • Mobile Care app/ Software update always pops up with power on

    I am guessing that this is the application Verizon uses to deliver updates to the phone?
    Every time I power up the phone, I get a software update screen telling me it is going to download an update, which it never actually seems to do.  It's pretty irritating.  Is that the normal behavior?
    Also, take a look at the permissions for this thing.   It has access to everything.  EVERYTHING.  Not acceptable.

    Hi smeister,
    Thank you to the community for your responses. After some further research, I see that though there is a MasterCare application in the Market, there is also a MasterCare application that is pre-installed on the Xperia Play. My apologies for any miscommunication. 
    Looking at the "Info" under The Mobile Care app on the Xperia Play, it's showing it does auto launch when you are using data. It is part of the phone's software to allow Over The Air (OTA) services like OTA firmware, etc. There will be an automatic pop-up when an update is available. The pop-up will go away once the update is completed. I also show that Mobilecare does track the data on the device. 
    Though this app is pre-loaded, if the software on the phone has been altered and the app is removed, any updates in the future on the device will not be allowed. This is an app that does need to stay on the device in order for any updates to be performed. 
    I hope this information is helpful and I apologize for mistaking this application for the Android Market Mobile Care application. 
    Thank you and have a good day! 

  • On Car-Kit, since update 2.1, can no longer receive phone calls

    I have a Ford S-Max with built-in carkit (Blaupunkt I believe), using BlueTooth to connect to my iPhone.
    Before updating to 2.1 all worked fine, even phonebook.
    Since 2.1 I can no longer accept calls. It rings, but when I pick up the phone nothing happens.
    Something changed in 2.1? Anyone with similar problems?

    Yes I have the same problem with my S-Max/iPhone. All worked fine until 2.1 update.
    I have completed a full restore on my phone, switched BlueTooth on & off and still no joy. Only work round I found is to to pick the phone up and answer it. Then BlueTooth kicks in and you are back to hands free again.
    No problem dialing out though via voice.

  • ITouch won't work in car after Software update

    After the latest update to iOS 4.2.1 my iTouch cannot be identified by the multimedia system of my Volvo XC60 anymore. The Volvo dealer stated that Volvo cannot help and that this problem is already reported to apple. As there is no information about whether/when a solution would be available, I should like to reinstall the previous version of iOS: How does this work??
    Thank you for your support
    Tom

    There is no legitimate way to downgrade iOS. I also recommend that you search the iPod Touch forum, using the search function on the right, for volvo since this has come up before.

  • Problem with update firmware car kit ck-100

    Nokia Car Kit Software Updater write "wizard stop with error" after try of downloads update.

    I notice the original post is marked as "Assumed Answered". I read that the original poster can confirm or deny this. If this is not answered (as I assume it's not) can you please mark it as such so that it gets the appropriate priority with Sony Support?
    ANNOUNCEMENT: 'Assumed Answered' explained - how us SE Answers members work
    Hide Details
    Some of you have noticed your threads get marked as 'assumed answered' even though there might not be a solution/answer provided. Keep reading if you want to know why.
    Me and my colleagues in the Sony Xperia support team get a list several times a day. This list is called "Email Alert for Unanswered Discussion Questions".
    As the name might hint, it contains a list with threads that are unanswered.
    All threads that are marked as a question when created ends up in this list if not already answered within 10 hours.
    In order for us to get a good overview of the Support Forum we click on 'Assumed Answered' as soon as we have posted a comment, even if it's not really answered. The creator of the thread can then either keep it that way, confirm or deny it.
    Either way, we automatically subscribe to all threads we post in, meaning we will get a notification for each new post in every single thread we attend so no post should be missed.
    We can also choose to subscribe manually to a thread after marking it as assumed answered (we do this if good answers have been provided by other users already).
    by Markus (07-Jun-2012)

  • Car kit microphone not working after nokia softwar...

    I have a Nokia 5800 Express Music. It was working perfect in my car Bluetooth system. Recently I updated my software version to 60.0.003.  Now the microphone is not working while using the car Bluetooth system.  I can hear the caller voice but they can’t listen what I say.  All other phones are still working perfect with Bluetooth System. Therefore I think some bug is there with this software update. I tried changing Accessories settings to Headset, Wireless Car Kit etc., but still the problem exist.
    Please me to find some way to make the mic working or else help me to downgrade my phone software to earlier version.

    please somebody help.......

  • New ipod update breaks Mopar Jeep integration car kit

    I updated to iTunes 7 and did the ipod update on my 5G ipod that came with it. It has broken my Mopar ipod Jeep Integration kit to listen to my ipod in the car. I get the message from the car that says "update firmware," which I assume means that the car can't recognize the new firmware. I'm downgrading now, but what I want to know is, are future ipod updates going to break my car kit every time? Is it something apple can fix or mopar? Does anyone have this problem with their car integration and ipod updates? Also, can I run iTunes 7 with the last working version of firmware, or will I lose the new movie and game features? Any other stories/workarounds/information would be great, the documentation with the Mopar kit is horrible...

    I downgraded to the last ipod update by downloading it from apple and don't seem to have any problems with iTunes 7 or my car now, aside from iTunes telling me my ipod isn't up to date yet. I still would like to know if I will ever be able to update my ipod again or if I am "stuck" with this version of the ipod software? I don't like that I can't update it again without it breaking my car integration. Hopefully they fix that in next release.
    Powermac g5 1.8 dual   Mac OS X (10.4.7)  

  • Bluetooth car kit connectivity issue after IOS 8.1.2 update

    After the IOS 8.1.2 update I cannot connect my IPhone with the Bluetooth car kit (hands free) system of my car.
    Before the update connectivity was perfect, after the IOS 8.1.2 update the car kit does not find the IPhone any longer.
    To solve this issue I deleted both the car kit and the IPhone from the paired devices list of both (my car and the Iphone) and tried to pair them again - no success. The car kit just does not finds the Iphone any longer.
    Please, help!!!

    Just to share the way I finally solved the problem - might be helpful to somebody else.
    I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
    I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

  • I am being prompted to have Activex enabled by the Ford SyncMyRide website in order to download a software update for my car. Is Activex already part of Firefox or is it an Add-on I have to install?

    Is there an ActiveX feature in Firefox? I have not been able to receive a software update from the Ford Motors Website because they claim my browser does not have ActiveX enabled. Please advise if this is an add-on.

    MacBook Air 2012 and 2013 have different hardware, the update only applies to 2012. Nothing wrong with yours. If it says it's only for 2012 then it won't work on 2013.

  • E66 with Audi SAP Bluetooth Car Kit

    Hi
    I've been using my E66 with my Audi A6 SAP car kit for two weeks now. Unlike my E51 which works fine the E66 connects ok then after about 1 or 2 minutes disconnects. After another 30 seconds or so it reconnects to the car kit. It seems that if I make or receive a call during the first minute then the E66 will remain connected. If I don't it will enter the disconnect / connect cycle.
    Is anybody else having the same problem?
    Cheers
    James

    The generic problem you have with Car Kits made for Car Manufacturers and phones is that both companies are very inclined not to talk to one another, and when you try and find out why its failing each will blame each other.
    The problem may quite probably be resolved by a software update, either in the phone or the car.
    You can check the Nokia site to see if an update is available for your phone.
    The Audi update will have to be done by your local Audi Centre, which can be tricky to do to say the least, because they tend to stall, and give a self-righteous attitude towards the customer trying to tell them how it is.
    I'd check with a few local Audi Centres.
    The list of compatible handsets, is always out of date, and you get phones like the 6230 etc they dont really pay much attention to it.
    I found that my S3 kit which is not SAP, would disconnect when my phone left the range of my WLAN, sometimes if I restarted the phone before I got it, it wouldn't disconnect at all.
    I don't get it at all with my E71.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Can't connect to our new car kit

    Bought a Blue Ant supertooth 3 car kit. All the other phones in the house work with it except the palm 700p verizon. The only thing I can think of is that the palm doesn't ask for the pass key to be entered. It finds the kit, tries to connect then says unable to add to your trusted list.
    Just tried it again for the 20th time, now it asks for the passcode but when I enter it it still says can't add to trusted devices??
    any ideas?
    Post relates to: Treo 700p (Verizon)

    Hello!
    First make sure the car kit is NOT in the trusted list already.  In you bluetooth application on the Treo, go into the bluetooth application and then tap on Setup Devices.  From there, tap on trusted devices button.  If any car kit, including your blue ant, is there, delete them and hit done.  Afterwards, soft reset the deice and try to resetup again.  This time when you perform the setup via the phone, make sure your searching for "Nearby Devices" and not "Trusted Devices" or "Known Devices" and see how that fairs.
    If nogo, then hotsync the phone to backup the content and then hard reset the Treo.  Right after the hard reset, try to pair to the bluetooth device again without yet rehotsyncing.
    Also make sure you are using the 1.10 software version on the Treo.  Go here for additional info on software version and update if needed.
    Post relates to: Treo 650 (Unlocked GSM)

  • IPhone G3 S with built in BlueTooth car Kit problem

    I have an iPhone 3Gs.
    When I connect to my car kit (Motorola T605) the kit always falls back into music mode.Tthe phone works in this mode but when I use either the iPod feature or a GPS navigation app I get no sound through the car.
    It worked perfectly with my older iPhone with 2.2.1.
    Any ideas as to what is wrong or what I can do to rectify the problem ?
    Do any of you have car kits that work fully with the iPhone 3G s that you can recommend .. It looks like I might have to change my car kit.
    I have updated my 2.2.1 3G phone .... The same problems exist. It seems to be a version 3.0 software issue to me.

    Hi Tim,
    I have just spent 2 hours on the phone with Motorola's tech support (They were useless at best !!!). I got nowhere at all. They blame all the problems all on Apple and say their kit is NOT guaranteed to work with all phones with A2DP. I wish they said that in their sales literature and i told them that .. they seemed to be unable to accept the idea that their saying it works in writing is somewhat misleading (Wrong in this case) and perhaps even a breach of sales law.
    I then spent over an hour at my local (and very experienced) car audio store. they were more than helpful but they also could not get things working correctly.
    I do have a Sony car stereo system and this has a lead for an iPod to play through the stereo system.
    I connected my iPhone to this ... it worked .. sort of ! .. I had to play around a bit .. I managed to get Audio to work and my navigation App (Navigon Europe) worked this way also.
    The store then played around with a Parrot MKi9100 car kit that they had on a demonstration stand.. This was significantly better and I am having my motorola T605 removed and disposed of in disgust tomorrow and the Parrot installed.
    The Parrot will also charge the iPhone via it's cable unlike the Motorola and Sony setup.
    I did speak to Parrot themselves and they have said to me that any of their models in the MKi range will be fine with the iPhone with version 3.0 software as they have done software updates .. The updates can be applied by the owners simply and quickly.
    Just for information for you and others with similar problems ... We also tried several car stereo systems that say they have bluetooth and iPhone compatibility built in to them .. Alpine in particular ... Not one worked !!!
    The Parrot is being fitted as I said earlier tomorrow ... I will make a further report when it's all done to let you know just how good it is and how everything works.
    I hope this helps.

  • 9630 does not connect with Bluetooth Car Kit Speakerphone

    Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed.  I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result.  To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases.  I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it.  My carrier is Sprint, and OS version is 4.2.0.285. 

    The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
    Go to: www.blackberry.com/update and then follow the prompts to update your device software.
    This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
    Once the update is done, test the Bluetooth connection.
    Hope this helps.

  • Bluetooth/Car Kit Feedback & Echo

    Hi
    My boss has told me that he has a problem with his phone. it's a Nokia 6120C. He is getting a feedback/echo when he is in the car. He has Bluetooth and also a car kit. He seems to think that they are both working at the same time, hence he gets an echo.
    Apologies for not knowing or understanding fully what is going on here.
    i would think that you could just turn one off and use the other?? is that possible?
    Any thoughts, solutions are welcomed.
    Thanks
    Solved!
    Go to Solution.

    hi shari,
    wat kind of car kit is ur boss using?
    u might want to consider updating the software on his phone. this can be done using the nokia software updater available in the download sections of this website. be sure to back up all his data before u do it as a software update can cause a loss in data.
    if the software update doesnt work, i'd suggest u take the phone to a nokia care point to see if they can help u out there
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

Maybe you are looking for

  • CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

    Hi,  i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and

  • IPhone and iPad app compatibility

    I currently own an iPhone 4.  I am planning on purchasing an iPad 2.  If I purchase an app on my iPhone, will I have to pay again for the iPad version of the same app?  For example, the app Where's My Water? has the plus symbol next to the price.  Do

  • Cannot edit MPEG-2 in Windows Photoshop CS6

    Just upgraded to Photoshop CS6 and am attempting (unsuccessfully) to edit some MGEG2 content. The video content has been extracted from Windows DVRMS files using DVRMStoMPEGGUI. I can work with H264 content in Photoshop without a problem. All MGEP2 v

  • MacBook Pro to iMac--Extended Desktop

    I work primarily on my MacBook Pro. I have an iMac (24" display-2.4GHz Intel Core 2 Duo) at work that I would like to connect to the MacBook Pro to create an extended desktop b/n the two. Just to be sure, I'd like to know what adaptors/connectors I n

  • When I drag pdf files into iBooks Author, the background in the pdf file changes into the colour of my book (brown/beige)?

    Hi, when I drag a pdf file (when working in Preview) into iBooks Author, the background colour in the pdf file changes into the background colour of the book. This happens not consistently, sometimes the background of the pdf file does not change (an