Car mode incomming MSG pop up

when receiving new msg while car mode is running, a nice big pop up offer the option to close/open or call back the number. The openned displayed text MSG is in bigger adaped font but what is nicer is that the msg reader is automatically triggered. Hoever those pop up will not apear while navigating with drive even if started from car mode.Since car mode is already altering the drive menu to replace the exit button by the car mode button I am sure that overlaying those pop up while navigating could be done.I hope  that the car mod development team still supportinf future updates. nokia N8 belle FP1

it`s pretty easy:
In my Compponent 'CALL_TRANS' i created an Interface Node with my parameters.
The Component which call the CALL_TRANS Comp, mapped this Node and supplied the data.
regards Tobias Arnold

Similar Messages

  • Car mode sv display brightness

    HI i am using car mode on my N8 belle Fp1. but regardless that i use the ``light on`` app to keep the screen light on and i select the brightness to full and even set ``situations`` to have the brightness to full when me ``car`` situation is set. ``car mode`` always turn the lighting/brightness down after a minute or two.That would be very nice at night time but is anoying during day driving and especially with sun glasses.``Car mode`` offer no setting to cancel this behavior. At least if it would thake the ambiant light sensor readings in acount it would would be helpfull.In the next update it would be nice to adress that issue.

    So finnally, I found a work around, since I set ``lights on`` to always ask, when detecting the charger, I found out that it will only apply on the top application or home screen pending witch ever come first. The ``lights on`` querry pop up MSG appear at charger connection and before my CAR mode starts. So that's the Car Mode overrides settings that take over and only the ``keep display from blocking`` remain. Then it will revert to it's dimm setting without locking. If I reset My car charger off then back on after Car Mode is up then the display will remain full bright as intended. So let say that I can live with it.

  • Hello i am trying to help a friend to get the update for the mac os x maverick and msg pops up saying distribution file not verified

    hello i am trying to help a friend to get the update for the mac os x maverick and msg pops up saying distribution file not verified

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can I uninstall or disable CAR MODE ?

    Every time the phone connects to my car bluetooth system, the Car Mode app pops up and asks some questions, which don't appear relevant to anything. I have to terminate it.
    What does it actually do?

    Yes; I read that link, and many others, but it's written in the usual "idiot monkey customer" language
    Reading between the lines, all that the Car Mode app is is an app launcher, with big buttons! It doesn't seem to do anything else.
    "Although Car Mode is pre-installed in Belle FP2 firmware upon 808, unless you actually pair with car Bluetooth via this application it shouldn't launch by itself."
    Yes; that's exactly what it does. But it isn't needed, and I have to terminate it each time I get in the car and start up the engine. My N700 (firmware 1506) doesn't have this issue; it just works quietly.
    How can I stop Car Mode launching itself when the bluetooth connection starts?

  • The iPhone needs a car mode

    I'm very pleased so far with my Iphone except for one problem. I always would use my old Ipod in the car every day, and it was easy to use, just plug the aux in to the headphone jack and play it. Switching from song to song if I needed was easy, I just had to press right on the well or left, no need to look at the actual ipod whild doing this, and pausing was just as easy.
    Problem:
    But with the Iphone its very difficult to actually control the ipod features while driving. The buttons are not easy to hit if your trying to concentrate on driving and not finding the buttons, pausing is just as difficult.
    Solution:
    On the contrary it seems like an easy fix for apple. Just add in a car mode for the ipod functionality.
    Skipping songs: Simply touch somewhere on the screen and drag to the left to skip back, and drag to the right to skip forward. This would effectively eliminate the problem of having to look at the iphone to find the skip button when your driving.
    Pausing/Playing: I'm sure someone could think of a good tapping method for this, or maybe dragging the up or down would pause and stop.
    It just seems to me that using the ipod functions in the car while driving is actually dangerous if you want to switch songs, pause, play and whatnot because it requires looking at the phone. (im sure some peoples solution is to just use a playlist, but thats really not ideal if you are tired of a song, or just need to pause for a moment.)
    Message was edited by: invulse

    I just purchased an install the Alpine CDA-9886 car audio receiver in my car, with the KCE-411i iPod Adapter. The 9886 has iPod controls built in and works with my iPhone. You just use the actual buttons on the receiver, rather than the phone, to pick your songs, playlist, volume, pause, play, etc.

  • Nokia Car Mode on N8 - Bluetooth disconnects when ...

    After recently upgrading to Belle, I installed Nokia Car Mode because it is what I had been looking forward to the most. However it simply disconnects the Bluetooth connection to my car's audio system a few seconds (maybe 5 seconds) after I enter the Music module.
    Steps to recreate:
    Start car (1999 BMW M3 running DICE Mediabridge 1500 connected to CD43 head-unit). Car's Bluetooth mode is on and car is discoverable.
    Launch Nokia Car Mode on Nokia N8
    Pair phone with car using the Bluetooth pairing button on the launch screen. Pairing is successful so continue by pressing the Start Car Mode button.
    Press on the Music button to enter the Music module. Music attempts to start playing automatically. The display on the head-unit says "PLAYING", but no sound from the speakers and then the BT connection ends in about 5 seconds.
    Thinking that perhaps my old BT pairing info might be saved/corrupted and not usable with the new Belle firmware, I performed a complete reset and re-installed Belle using a tool whose named I should not mention, but no luck even with a pristine build.
    If I uninstall Car Mode from my phone, I can connect to my car and play music just fine. If you have navigation running simultaneously, the navigation prompts get routed through the car audio by virtue of the music player's streaming. However as soon as I re-install Car Mode, the same problem begins and remains until I uninstall it again. (If you don't uninstall Car Mode from your phone, it will launch itself automatically when it detects a BT connection with a car using the relevant BT profile.)
    Here's another observation: During the 5 seconds that the phone has not yet disconnected, the Music Player's progress bar moves at a rate of about 1 second forward for every 5 seconds elapsed. So it is as if Car Mode introduces a performance issue to the playback.
    So now I am living with the way things were in the Anna days: I can play music and navigation audio through my car just fine, but I really wish I had the extreme convenience that Nokia Car Mode provides (when it works as designed).
    Solved!
    Go to Solution.

    I just installed Car Mode on my Belle-equipped N8. I have two serious complaints (not sure if this is the best place to post, but here goes
    a) (Really inconvenient!) My speed dials DONT WORK! If I press and hold "2" in regular mode, I speed-dial home. In Car Mode, I just see the "2" appear, and it keeps beeping the longer I hold it! There does not appear to be a way to use speed-dial in Car Mode, which is a #FAIL (in my opinion.) You ought to be able to somehow configure this.
    b) I love Internet Radio. When you select Music, you go right into the music player and can never select Internet Radio. You ought to be able to add other audio applications to the Music button.
    Thanks for listening!

  • When I plug my Droid Incredible 2 into a car charger the phone is now permanently in"Car Mode" and won't get out. I heard that Droid will fix this, but it hasn't happened.  Does anyone know how to fix i

    I have a Droid Incredible 2 phone.  I bought  car charger and ever since I have used it, the phone thinks it is in "car mode" even when the phone is in my home, my purse,...I sets to speaker and I can not hear the phone ring.  It freezes on "car mode".  I heard that Droid is supposed to be fixing the problem, but nothing has happened yet.  Is anyone else having this problem, and does anyone at Verizon know when/if this will be fixed.  If not, I expect a new phone from Verizon.

    there are two ways, usually if u restart the phone it will reset, but the other is going to your system and shut it off manually...

  • Car mode bug in FP2 on 808

    (This bug was also present in the betalabs version) It is possible to select 88.10MHz using the rolling wheels, but if you then select another frequency (either using the rolling wheels or one of the three recently used frequency buttons) you can't then reselect 88.10MHz using one of the the three recently used frequency buttons. It's as if a button with '88.10MHz' written in it gets ignored if pressed. I suspect a 'greater than or equal to 88.1' has got coded as 'greater than 88.1' in a line of code, thus causing this bug. It only seems to affect 88.1MHz. 88.2MHz works fine, as do the others.

    It's the Car Mode that came automatically as part of the Nokia 808's FP2 update which came out in the past few days. However, the betalabs version I mentioned (which I have just realised was on an old 701 not on the 808) also had the same behaviour. In short, if the frequency 88.10 MHz ends up on one of the large 'previously used frequency' buttons it will not change the frequency to 88.10MHz and just gets ignored. I checked the frequencies at the upper end yesterday and they work properly, so it just a minor glitch.
    Please try it yourself and post back. Select 88.1, then, say, 90.0, then reselect 88.1 using the big button only.

  • When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • "In Car" mode: to avoid texting while driving

    Simple solution to Avoid texting while driving.
    Just like we swtich on "In Flight" mode...there should be a "In Car "mode. It should do the following things
    1) Turn on Bluetooth...and sync with car.
    2) If you get a text while in this mode..there will be an automatic response to the text " I am currently driving and can not reply to your text message currently".
    3) It should disable you from actively texting.
    Thanks,
    Chinmay

    I love that I found this. I just bought a Honda CR-V and now have the Bluetooth through the car. I absolutely love it. I would love to see a automatic reply when a text comes in to say "I am currently driving, if you need an immediate response please call me so that I can use my Bluetooth". One thing I really love about having the in car Bluetooth, I don't even hear the text come over for some reason. It does not make the sound over the speakers unless I have my radio to Bluetooth for my music.
    Now the new Civic comes with a plug where it will read you texts and stuff. They need to make this plug compatible with all vehicles through the USB port in the car.
    Come on Apple geniuses you can do this.
    Thank you in advance.

  • HT4623 while restoring my iphone, an itunes msg pop up saying that "the iPhone 'iPhone' could not be restored. An unknown error occurred (1015)". What are the problem?

    what is the error 1015? msg pop up while restoring my iphone.

    This usually means the iPhone has been hacked/jailbroken and it may no longer work as a result.
    http://support.apple.com/kb/TS3694#error1015
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • [iOS][Playlists] Car Mode Suggestions

    The main reason I have Spotify is for my commute. And there are a few improvements I wish could be made for the Car Mode. 1) Using the Spotify feature integrated into my car, I can scroll to a playlist and select a song. But once that song is selected, I can't select another song in that playlist easily. (Aside from just hitting previous or next.) It makes me select "Playlists," find the playlist I want, and scroll through everything again.  2) Which brings me to my second suggestion. There's a short limit on how many songs appear on my screen (car screen, not phone)... I continually have to hit next if the song I want is at the end of a playlist. Can you remove that limit or at least make it larger? (I think it's currently at 25 or something like that.) 3) Finally, if you're going to lock the entire app while in car mode, I'd like to have a search function integrated into my car system. Thank you!

    Updated: 2015-07-29Hello there!
    Thanks for the feedback, unfortunately we can only handle 1 feature request per topic, otherwise it's impossible to manage the received kudos / give the idea a proper status.
    If you want to start a general feedback topic, that's great! But please use the respective help forum then. ;)
    When you're re-posting those ideas in separate topics, please make sure to use the search function, since a lot of ideas might already be out there in the ideas forum. Also make sure to mention what kind of car system you're using.
    Thanks again!

  • Nokia Car Mode with MirrorLink v2.0.6503 - can't u...

    So I've bought MirrorLink app for the Nokia 808 FP2 (it's been a pain to buy it) but I've got an update and I can't install it.
    I download it just fine, it installes (takes a long time), restarts my phone. And then I open Car Mode and it's still the old version.
    Then I go into the store and I get the update again!
    Tried 3 time, and no luck.
    Anyone got an idea?

    Presumably you had to purchase this application by signing in with your Nokia account upon a different Symbian Belle device, as still says application "installed" upon 808 Belle FP2 as basic version pre-installed with device software? It makes no difference if you try to un-install this version first before trying to purchase either.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HT1688 itunes is not able to download apple ios update . every time a msg pops out saying timed out????

    itunes is not able to download apple ios update . every time a msg pops out saying timed out????
    how can i solve it..
    pls help!!!

    Saying what timed out?
    Try this... search the forums using the search box in the upper right corner of this site for the EXACT error message, you will find a resolution.

  • Text messages not being sent with Google Now or in Car Mode

    When attempting to send a text message by voice using either Google Now or when in Car Mode, the text message gets created correctly to the right person, and the content of the message is correct.  When I confirm to send the message, I always get "Message Not Sent".  I'm able to send text messages manually using the standard Messages app.  Researching this issue, I've seen that there are some others having the same problem but I have not found or heard of a resolution. 

    I don't have a Verizon Messages app.
    (personal info removed)
    "Don't be afraid of opposition. Remember, a kite rises against, not with the wind."
    - Hamilton Wright Mabie
    (email message information removed)
    Comments edited for personal information as required by the Terms of Service.
    Message was edited by: Admin Moderator

Maybe you are looking for

  • HT4356 I have two iTunes accounts, how can I merge/manage them both ?

    How can I navigate between two different itunes accounts ?

  • How to apply a simple javascript into JSF

    Hi everyone. This is my first time using JSF and i am abit confuse in applying some simple javascript into my JSF. Actually, i just want to add a simple function that is to disable user from input some certain textfield (h:inputText) based on the sel

  • Merging 2 volumes into 1

    Ok now I am running out of space on my Mac OSX Volume but there is a Macintosh HD Volume. The issue I'm running into is that when I went to the Disk Utility to try and remove the partition it tells me that the Mac OS X partition is the start up volum

  • Could you please confirm that the Service Pack 3 will install on SQL Express 2008 R2 SP2 With Advanced Services.

    We are using SQL server  Express 2008 R2 SP2 With Advanced Services.Its a 64 bit server.We want to Patch Service Pack 3 On express edition. Could you please tell us whether  the Service Pack 3 will install on SQL Express 2008 R2 SP2 With Advanced Ser

  • BC4J bug in 9.0.3.3

    Hi, I've just downloaded Jdev 9.0.3.3 and the very first thing I tried seems to have a bug. I tried to remove an attribute from a BC4J entity using the Entity Object Editor. The first thing it does is lock up for about a minute, then it eventually st