Car's Music System Not Recognizing Iphone by USB

Hi All
I tried to use the iphone to listen music on my car's music system.
However te display shows reading USB and hangs up.Just to confirm that the port is fine I trieother medias and that worked fine.
Please help me in getting tis issue resolved.Any help in this regard would be highly appreciated.
Thanks in Advace,
Mahesh

Does the car connection state that it supports iPhones?
It may not work because it is not supposed to.
The iPhone does not present itself over USB like a USB drive would do.
You cannot see the music files on the iPhone directly over USB port.
My guess is that the car connection is expecting a simple USN device and NOT an iPhone.

Similar Messages

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

My new iPhone 6 paired perfectly with my Mercedes system. That said, on your iPhone 5, reset your network settings and then try to pair it again.

TS1538 windows xp not recognizing iphone - apple usb driver not in list

I have followed all the troubleshooting steps in TS1538. I have uninstalled everything associated with apple and reinstalled the latest version of itunes at least 10 times. I have tried and tried and tried to figure out how to get the Apple Mobile Device USB Driver to show up in the device manager list with no luck. Everything else appears to be as it should according to all the troubleshooting steps with the exception that the USB driver will not show up in the list. I've tried taking a screenshot and getting the computer to recognize it as a camera without luck. I've tried using a different apple iphone, and ipad and an ipod with no luck. I've taken my phone and cable to another computer and it works perfectly. There is something preventing itunes from installing the usb driver on my computer. This is my work computer that I need to sync with to keep my contacts and appointments synced. Please help!!! I have disabled everything I can including software, antivirus and all peripherals without any luck. I am running winXP service pack 3 and itunes v. 10.7.0.21.
This has worked great for the last 2 years and then stopped working about 3 weeks ago and I have been trying to fix it off and on since then. Any and all help is appreciated. It started when I was trying to get my sons locked iphone 3G to sync with my computer and it wouldn't show up. That was the last thing to sync with this computer and nothing has worked since. I am confident that I've eliminated all the variables that I could.
Thank you for you time and effort.
Chad

Maybe a Microsoft Update broke the driver? Or an update to your security software? Have you rebooted your computer? Have you tried disabling your antivirus and firewall? Have you tried removing and reinstalling iTunes?

Windows PC suddenly not recognizing iPhone. Recognizes another iPhone just fine. USB works until operating system in PC (XP) loads. Any clues out there?

Windows suddenly not recognizing iPhone, yet recognizes another iPhone fine (sees in iTunes, etc.) USB appears to be fine - passes electrical to iPhone until operating system (XP) boots, and then "disconnects". I've gone through all of Apples suggestions for troubleshooting - including msconfig. Same result - quick double "bong" tone and no connectivity to iTunes. Versions are all up-to-date.
Any suggestions out there?

How did you get the VMWare sync to work? I hate Apple at this point.

ITunes not recognizing iPhone 5 iO7 on Windows 7

I have exhausted myself dealing with this problem. My iTunes will not recognize my iPhone 5. I am running Windows 7 64 bit and my computer recognizes the phone when i plug it in, however, my iTunes does not so I am not able to sync any music. I have tried practically everything I have found on the internet to fix this problem and even the people at the Apple store could not help me with my problem. I have uninstalled and installed all Apple related programs, I have insured that the Apple Mobile Device USB Driver is working correctly but nothing seems to fix the problem. I just don't know what to do anymore because nothing seems to work. I have followed the suggestions contained in the following discussions but nothing seems to work. Thank you for your help.
Referenced discussions:
https://discussions.apple.com/thread/3121604?start=0&tstart=0
http://support.apple.com/kb/ts1538

golds04
Re: iTunes not recognizing iPhone 5
Feb 16, 2014 7:45 AM (in response to oryyx)
Had this problem this morning.
Once in the past had to erase my iphone and reload it.That was unpleasant.
This morning had the problem,too.
Plugged in my iphone directly into the Imac (not hub) then clicked shut down on the imac.
Pressed the button in the back while the iphone was still plugged in-and when rebooted iphone was visable in itunes.
Hope this helps.
Thanks so much for your suggestion. I'm using a MacBook Air and I just tried this with my laptop - shutting down the computer all the say (not restarting it) and then booting it back up with the phone plugged in. It didn't work but it was worth a shot! Thank you!
Jen912 wrote:
I had this exact same problem and just figured out how to fix it. I had to reload the driver on the iphone5 in order for itunes to recognize the device. Follow the steps here to see if you might need to do the same thing. Once I reinstalled the driver, everything works fine and I'm now able to sync with itunes again.
http://support.apple.com/kb/TS1538
Thanks for the suggestion, I have seen a TON of posts like mine where this is the solution. Unfortunately, I am on a Mac not Windows so the driver isn't the problem.

My PC not recognizing iPhone

My Pc not recognizing iPhone. I tryed a lot of ways but nothing help.

If its anything like what my pc does from time to time... Is that when I plug in , Itunes "locks" up for a period of time followed by it finally "letting go" and then not seeing my iphone. Granted, I use an Iphone 4 but none the less I'm assuming this is the issue you are having.
What I do (cant take credit for this, learned from another user on these boards) is hold your home button and power button at the same time. Let the iphone turn off and then turn it back on. Plug it back in , and it should be seen. If that does not work (does not always for me) try it when the usb cable plugged in. One or the other usually does the trick for me.
Good luck!

T60 system not recognizing drivers.

I have a T60 laptop, model 2613-HKU. Recently I just reinstalled Windows XP. After the OS installation, I installed every drivers listed on Lenovo's website:
http://www-307.ibm.com/pc/support/site.wss/MIGR-62928.html
Still, under "Device Manager", I saw a list of uninstalled devices:
-Biometric Coprocessor
-Ethernet Controller
-Network Controller
-PCI Device
-SM BUS Controller
-Unknown Device
-Video Controller (VGA Compatible)
So I think in this case my issue would be likely to caused by the system not recognizing the drivers? Any help or suggestion would be really appreciated. I have posted a similar post before since I thought I only have an issue with the wireless system, so I apologize if anyone consider this somewhat a duplicate post.

Just checkin: Lenovo driver installs have two steps: 1. Extract 2. Install. Did you do step 2?
When you run the downloaded file it extracts, usually to a directory under C:/DRIVERS, then you go to that directory, and run the installer (usually setup.exe, but not always - check the installation instructions).
I don't work for Lenovo. I'm a crazy volunteer!

Client Systems not recognizing updates

Client Systems not recognizing updates that have been deployed. application and task sequencing work perfectly.
Circular references (0x8024000F) in meta data. Any help would be greatly appreciated.

A single line from a logfile taken out of context and without even knowing the name of the log does not help ... Please add details.
Torsten Meringer | http://www.mssccmfaq.de

After unsuccessfully updating to Yosemite, back on Mavericks. But now my Timemachine or system not recognizing hard drive.

After unsuccessfully updating to Yosemite, back on Mavericks. But now my Timemachine or system not recognizing the hard drive. Is there any way to manually locate or find the hard drive?

Hi kruione,
If you are having an issue with an external drive not being detected by your iMac, I would suggest resetting the computer's parameter RAM. See this article for how -
OS X Mavericks: Reset your computer's PRAM - Apple
Thanks for using Apple Support Communities.
Best,
Brett L

ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, NOT ABLE TO SYNC

Hi Everyone, just noticed an anomaly with my devices
ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, AND NOT ABLE TO SYNC. ANY IDEAS WOULD BE HELPFUL, THANKS

Open Device Manager and Right click Apple Mobile Device and choose Update Driver
Select BROWSE My Computer For Driver Software
Select Let me pick from a list of Device Drivers on my Computer
Click Have Disk button---NOTE if the have disk option is not available. Choose a device category
such as mobile phone or storage device if listed then Click Next the have disk button should appear.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
Double click the "usbaapl" file or "usbaapl64" or if there is no driver folder look in
C:\program Files (X86)\ Common Files\Apple\Mobile Device Support\Drivers. instead
Click open in Have Disk Window Then Click NEXT and then FINISH Windows will install the Drivers
GOT THIS FIX FROM AN EARLIER POST BY J F FOURIE and it worked for me
Hope this helps

My computer is not recognizing my apple usb cable what do I need to do

my laptop is not recognizing my apple usb cable I'm using windows vista what should I do? my Ipod is disabled and I need to connect it to itunes so my iphone for and update.

Try connecting your Mac to the Time Capsule with an Ethernet cable to see if that lets AirPort Utility "see" the Time Capsule.

Caps lock and shift not recognized from a usb or virtual keyboard on the Mac

Caps lock and shift not recognized from a usb or virtual keyboard on the Mac client. You have to use the native keyboard or bluetooth keyboard.

Hi,
nswint, it seems that we have to do as you described.
Corey, I have the remote desktop client installed on a iPad Air, I can input capital letters via the on-screen keyboard within the remote desktop session that we can activate by a tap on the keyboard icon in the connection bar.
Thanks.
Jeremy Wu
TechNet Community Support

PC not recognizing iPhone 3G

I have an iPhone 3G and for some reason my phone is no longer being recognized by my PC. Please help me figure this out.
I plug it in with its USB connector and my PC (running XP) no longer picks it up. Also, one of my iPhone capable music players does not register it. The last time it worked, I plugged it in and both the iPhone and PC would recognize each other and then not recognized each other; as if I was plugging and unplugging the USB connection repeatedly. I can still charge it through the wall charger and one of my other music players also recognizes it. I have received error messages from iTunes saying it encounter a read error, but now I don't get get an error message.
Please help me figure out why this happens.

I was able to get the device to work by stopping and then starting the Apple Mobile Device Service.
I followed this link: http://support.apple.com/kb/TS1567

ITunes 8.2 not recognizing iPhone 3G

I have an Intel iMac and since the upgrade, iTunes is not recognizing my iPhone anymore. iPhoto does not open on its own anymore either. I have checked preferences etc., but cannot find how to correct this. I have also done a soft and hard reset on the iPhone.
Thanks

I'm having the same problem.
I saw that there was a new version of software available for my iPhone yesterday and decided to download it.
First I had to upgrade iTunes. I followed all the instructions but when the system restart occured, there was a glitch of some sort and it took a while for the installer to figure it out and fix it.
After *successfully validating the install*, it would not recognize my iPhone - which was connected to it moments before the install started. It repeatedly had me disconnect it and then reconnect it trying to see who's phone it was. Finally I rebooted again and it recognized the phone and downloaded and installed the new 3.0 operating system and then it re-sync'd the phone.
Everything was working fine at this point.
I eject the iPhone from the menu and later go to reconnect it to add some playlists I had made.
Again it does not recognize the iPhone - it knows one is there but can't figure out whose it is! Rebooting, disconnecting ect... doesnt help.
There is nothing in the Help Manual to steer me in the right direction.
Anyone have any ideas?

ITunes is not recognizing iPhone, iTunes is not recognizing iPhone

I am having no luck getting iTunes to recognize my iPhone. Is there anything that I can do so that I can transfer my music from phone to computer.

Do you have the latest ITunes 11.0.1?
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X

Car's Music System Not Recognizing Iphone by USB

Similar Messages

Maybe you are looking for