Car Stereo, Stream Music, Take Calls - BlueNEXT Adapter. Please help.

Hi
I've just changed my car and need some help and understanding.
The car has an integrated bluetooth hands free kit.
My wifes samsung paired immediately, my iPhone 3G had no joy pairing.
I have bought a BlueNext Bluetooth adapter from ebay. Although not perfect it allows the iPhone to pair and works fairly well for calls.
I was hoping using this A2DP adapter would also allow me to stream music, but it will not.
My questions:
If its working hands free for the phone calls why can't I stream music?
The adapter pairs the iPhone but trys to also pair BTT001 but fails. Is this why I can't stream music.
I'm tearing my hair out with this, so any help is appreciated.
Message was edited by: bwfc0907

this is somewhat a simple fix. after your bluetooth is connected/paired follow these simple instructions.
1. Pair your headset, make a test call to see if it works. End the call normally. or go to voice mail to check if your paired.
2. Dial *#307#, press call.
3. Press the answer button twice with 2 seconds delay in your bluetooth headset (If you don't do this correctly, you will continue to listen the ringtone in headset)if done correctly you will NOT hear the ring.
4. Press answer on iPhone. (do not end this call)
5. Press the home button, do NOT end the call.
6. Open iPod and play a song, YOU WONT HEAR SOUND!!! from iPhone, nor headset.
7. Once it is playing, press the home button.
8. Open phone.
9. Dial 0, press Call.
10. It will ring again, answer.
11. Press audio source, select your headset.
12. Press home button, do NOT end call. (we're almost there)
13. Open iPod and play anything you like.
Shorter Way:
1. *#307# Dial, press the bluetooth headset button twice.
2. Answer on iPhone, press source.
3. Select bluetooth headset.
4. Press home button, open iPod, play anything you would like.
There are some Drawbacks, there is no way to answer the iPhone when it is in this function, so all of your calls go to voicemail. Still working on a fix for this but I hope to get it figured out!
The saints revenge has spoken.

Similar Messages

  • I have an ipad 2 and I noticed I have over 3000 emails in All Mail. I want to know how can I delete these emails. It looks like you can only do it one at a time. It will take me forever. Please help me.

    I have an ipad 2 and I noticed I have over 3000 emails in All Mail. I want to know how can I delete these emails. It looks like you can only do it one at a time. It will take me forever. Please help me.

    You can only delete them one at a time on the iPad. If you have an IMAP email account, go to your email in on the server using a web browser and select as many as you can at a time and delete them that way. That action will be reflected on the iPad. In IMAP - whatever you do on one device syncs across all devices. If you have POP email - start deleting one at a time.

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • I change my apple ID and password like a week now and after changing all my information and MY apple ID, i noticed that i lost all my picture in my camer roll and my photo stream too ;(.. Can anyone please help me how to bring it back all my photos?

    I change my apple ID and password like a week now and after changing all my information and MY apple ID, i noticed that i lost all my picture in my camer roll and my photo stream too ;(.. Can anyone please help me how to bring it back all my photos?

    I don't know about your camera roll, but for photostream just do this:
    Go into Settings > iCloud > Delete Account and then sign back in using your Apple ID information.
    Make sure to do the same thing with your iTunes and App Store options.
    Settings > iTunes and App Store > Click Email and sign out, then sign back in.

  • Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Sounds like you need to contact skype.

  • So I want to sell music on iTunes from Viet Nam, and of course I don't have an US Tax ID. I'd love to know a way so I can start trying to sell music on iTunes store. Please help. Thank you so much.

    So I want to sell music on iTunes from Viet Nam, and of course I don't have an US Tax ID. I'd love to know a way so I can start trying to sell music on iTunes store. Please help. Thank you so much.
    It's been the biggest issue and I'm stuck. Could you guys please help?

    http://www.irs.gov/Businesses/Small-Businesses-&-Self-Employed/How-to-Apply-for- an-EIN
    If you have questions, you should contact the IRS.
    Regards.

  • After updating with IOS8 I cannot use iphone it is stuck in OVERSIZE PIC.  If i shut down and leave for awhile it still stays oversize cannot take calls or see apps.HELP!

    I loaded IOS8 today it worked for awhile . but not it is in OVERSIZE and and functional cannot rec calls or make calls.  Although phone does ring.

    Hello, MaxineTally. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend going through when experiencing issues making or receiving calls.
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    If you are experiencing and issue with the screen enlarged and this is causing you to not be able to take calls, try disabling zoom via the steps below. 
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    Cheers,
    Jason H.

  • Wrt54g and internal wireless adapter - please help

    Okay, I'm new to this home networking so my lingo is non existence. I have a wrt54g wireless router.  Can I use this router with my labtop internal wireless adapter.  I assumed I could use this router w/out a modem or ISP, based on what the sales rep told me when I bought the router.  Patient and expertise would be greatly appreciated. Please help!!!!

    When you sign up with your ISP, they will likely provide you with (or sell you) a modem.  Be sure you get a modem with an "ethernet port" (sometimes called a 10/100 port) on it.  If the modem only has a USB port, you will not be able to connect to it with that router.
    Sometimes the ISP will give you the choice of a modem, a router-modem, or a wireless router-modem.  Since you already have a wireless router, all you need is a modem.

  • Cannot find the hana output adapter, please help me.

    I have downloaded the latest version of ESP in SAP software  Download center, here is the screenshot
    However, when I try to install the hana output adapter in the custom installation process, I couldn't find it. Here is the screenshot:
    please help me with it.

    Hi Kevin,
    The HANA Output Adapter is one of the adapters that is a part of every installation (assuming you installed ESP 5.1 SP04).  It was not available until ESP 5.1 SP01.  I know one of the links on the download site takes you to the ESP 5.1 GA release which did not have the HANA Output Adapter.  Double check the version you installed.  If you did not install ESP 5.1 SP04, see my blog post here on how to get it:
         Getting the latest release of ESP from the SAP Software Download Center
    If you did install SP04, it is already a part of the product.  Use the "F6" key to toggle ESP Studio into the Visual Authoring mode.  Then expand "Output Adapters" palette and choose the "HANA Output Adapter" by click on it once and then clicking on the canvas once.  See the attached screen shot:
    Make sure you have installed the HANA ODBC driver and add an entry to ESP's "service.xml" file as described here and you should be good to go:
        SAP HANA Output Adapter
    Thanks,
      Neal

  • I can't find my music folder in my ipod. please help

    I synced all my folder music to Ipod classic, then I look to my Ipod classic but I can't find my music folder anywhere. Please help...

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • I have music in my library that has a (!) nest to it and i cannot locate it on my computer at all i have looked everyway i have a windows 8 computer and i tranfered all of my music from my old computer please help if you can.

    i cannot locate my music from itunes anywhere on my computer.  i have a windows 8 computer.  i tranfered all my music from one computer to another and now it is lost.  is there an easier way to transfer music from one computer to another i did it via a external hard drive.  please help i would love to listen to my music again.

    Have you seen this article related to your issue?
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    B-rock

  • Is there a 'Transferring music' guide for idiots?  Please help

    Please Help!!!  Two problems... 1) Bought a new PC, wanted to transfer music from old PC to new PC.  Wasn't sure how to do it, so I copied library onto a memory stick (just by copying and pasting) and downloaded to new PC.  Had to do it in sections b/c it all wouldn't fit on one transfer.  (Try to stop laughing, I know that probably wasn't the correct way to do it)  : )  Anyway, I authorized the new computer, and was able to listen to anything I purchased from ITunes on the old computer, but not any of the music I downloaded from CD's.  It gives me an error that says can't locate file, blah blah.  Where should I go from here?  Start from the beginning?  Go back and try to redo each song that did not come over correctly?  I'm an idiot, I know, please help.
    Problem #2 - I just downloaded new version on new computer and the majority of all songs now have the exclamation point next to them and when I try to listen, it says can't locate file.  : /  Please say this is not a lost cause!!!

    Figured it out...nevermind. 

  • I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

  • Calling a method   ---please help

    Hi everyone, I'm new to the forums, and completely new to java,. I've been searching for hours (online and in books) on how to call a method while passing parameters. I still haven't figured it out. I'm sure it's really easy, but I need some help.
    This program is for evaluating the quadratic formula. I can't seem to return x1 and x2 from lines 73 and 78 (labeled in code) from method quad to lines 39, 40, and 46. It will compile and run, but it will not display x1 and/or x2.
    Please help, and thanks in advance.
    Am I even close?
    import java.util.*;
    import java.lang.*;
    import javax.swing.JOptionPane;
        public class test
          static Scanner console = new Scanner(System.in);
           public static void main(String[] args)
            //Declare variables
            double a = 0;
            double b = 0;
            double c = 0;
            double d = 0;
             //Asking the user for input
            inputA = JOptionPane.showInputDialog(null, "enter number for x^2");
            inputB = JOptionPane.showInputDialog(null, "enter number for x";
            inputC = JOptionPane.showInputDialog(null, "enter number for constant");
            //Parsing string  to double
            a = Double.parseDouble(inputA);
            b = Double.parseDouble(inputB);
            c = Double.parseDouble(inputC);
            //calculating discriminant
            d = (Math.pow(b,2) - (4 * a * c));
             //Checking to see if the discriminant is less than zero - has two imaginary roots
             if (d < 0)
                   JOptionPane.showMessageDialog(null, "There are two imaginary roots.");
                }//end checking to see if the discriminant is less than zero - has two imaginary roots
         //calling method quad
                if (d > 0)
         quad(a, b, c, 1);                              //line 39
         quad(a, b, c, 2);                              //line 40
                                JOptionPane.showMessageDialog(null, "There are two real roots. They are root 1 = "
                                               + x1 + " , and root 2 = " + x2 + ".");
                else if (d == 0)
                          quad(a, b, c, 1);                             //line 46
                                 JOptionPane.showMessageDialog(null, "There is a single (repeated) root.  It is " + x1);
             //starting method quad
         public static double quad (double a, double b, double c, int n)
             double d = 0;                         //value for d - discriminant
             double x1 = 0;                         //value for x - solving for x
             double x2 = 0;                         //value for -x - solving for negative x
               //Checking if discriminant equals zero or is larger than zero
             if (d == 0)
                     n = 1;
             else
                     n = 2;
               //Checking if n equals zero
             if (n == 1)
                     x1 = ((-b) + (Math.sqrt((Math.pow(b,2))-(4 * a* c))) / (2 * a));
                     return x1;                          //line 73
             else
                     x2 = ((-b) - (Math.sqrt((Math.pow(b,2))-(4 * a* c))) / (2 * a));
                     return x2;                         //line 78
         }//end method quad

    Man, you guys/gals are great! You notice everything...I sure appreciate all the help so far. I've updated a few things, but I still can't get x1 in the method to pass the right input to line 39. For instance, if I set a=2, b=4, and c=-30, then x1 should = 3 and x2 should =-5, but both keep showing -5. They are always equal for some reason, even when they are not supposed to be.
    I see what you were saying with d always equalling zero. I was looking in the main where it doesn't always = zero, but in the method it was always set to zero. Thanks...good eye!
    num1 = quad(a, b, c, 1);                              //line 39
    num2 = quad(a, b, c, 2);                              //line 40
    JOptionPane.showMessageDialog(null, "There are two real roots. They are root 1 = "+ num1 + " , and root 2 = " + num2 + ".");I also added this to the method so d won't always = zero
    d = (Math.pow(b,2) - (4 * a * c));I also have all of the variables declared at the top, but I forgot to copy and paste all of them and I updated the System.exit(0) to close the JOptionPane along with extra } 's to close the program correctly.
    Again, thanks a bunch.

  • . I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

    Hello:
    I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
    Please Help
    maxsdad

    B-Rock:
    Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
    I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
    I was able to encode 5 full length music videos, but the results were distorted (video and audio).
    I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
    I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
    Thanks again for all your help.
    maxsdad

Maybe you are looking for