Carbon Copy and SuperDuper FAILED during copy for the 8th time! PLEASE HELP

Complete what Kurt has told you first. Then - if you use CCC - check the details in
B4 U post...
noting especially the two links to details for preparation of a target drive and the "Proof of pudding" test.
Then make use of this section of CCC Help.
BTW, having both source and target with the same name is an invitation to a mistake. Rename one or both of them. Use meaningful names to make life easier (and safer) for yourself. Select a volume's icon in the Finder, hit <return>, type the new name, hit <return> again. The OS will notice the new name(s) immediately. Use only simple alphanumeric characters, preferably with no spaces. Even something boring like "myCloneVolume" would be better than what you currently have.
Andreas

Similar Messages

Problem accessing MySites blogs for the first time - please help?

I have a customer who has installed SharePoint 2013 with a norwegian language pack, and it's working fine, except for a couple of things. We have a custom search web part that lists the 5 latest blog posts, but we're experiencing a bit of trouble with this.
It's similiar to this question:
http://social.technet.microsoft.com/Forums/en-US/4b1d053b-3b32-4e5d-834d-37f25c8b177d/opening-mysite-blog-links-gives-404-on-first-try?forum=sharepointgeneral
When I click a new blog for the first time, I get sent to a non-existing web page with the following link:
http://domainremoved.com/person/garrobbi/Blog/Lists/Posts/Post.aspx?List=c0a7fffb-fa75-4b74-a1ef-523b6c389e77&ID=1&Web=d3c87cb9-6a8e-4ed1-a998-a4d5e546fe27
and get a 404 error.
If i click back and navigate again, i get sent successfully to the same link but with Posts replaced by Innlegg.
I have also verified that the url of the link is the correct one in the first place, when i hover over the link.
The second problem they have, is that the blog profile pictures are missing. We've set up sharepoint with host named side collections and different url's pr site collection. Profile search and mysites shows pictures succesfully from both inside and outside,
but the blogpages show pictures based on were they are uploaded from. I've enabled crossdomainphotos on the web application.
Any clues?
Thanks in advance.
Anders

I took a quick scan of the fixes in SP1 and I don't see anything that looks to be a fix for what you're describing.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Cannot sync for the first time, please help

I'm using 3-G4 units, two will sync 1 will not. The one that will not is a G3 B|W unit that I upgraded to a G4 Processor 500 MHz After giving this unit a different name than the others,I can see all three computers in the isync window but when I press sync it starts but stops right away not completing the sync.
G3-B|W Upgrade to G4 Mac OS X (10.3.9) 500MHz proc,650HD,

It has died. Like a million times. It won't stay recognized long enough to charge. do you know what I mean? Meaning, I'll get the little icon that means there's very low battery, and it's charging, then after a few minutes, it will say "no battery power, connect ipod to power"
And I've tried an adapter that lets you plug it into a wall, and that doesn't work either. I do have an ipod clock radio, tho with a dock... I'll try that tomorrow. If that doesn't work,I might buy her one, because I feel responsible for this. But you don't care about that XD
Thanks for the help

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

HT1338 I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC

I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC.

Yes I just discovered that this morning but I have purchased another external harddrive and formatted it for both and am in the process of transferring the files across it and then I will erase the old harddrive and reformat it so I can use it.
I have learnt to format harddrives from this experience but am happy to see the back of parallells.
Thank you for your help though it is much appreciated.

HT201269 I just switch from a Windows 8 machine to a MacPro and when I try and sync my iPhone 5s for the first time it says that sync will erase everything on my phone because it is still synced to my old computer. Any suggestions?

I just switch from a Windows 8 machine to a MacPro and when I try and sync my iPhone 5s for the first time it says that sync will erase everything on my phone because it is still synced to my old computer. Any suggestions?

The Apple store wil do this for you.
You can call Apple support and they will help you
You can google it

OS X update 10.9.3 can't be installed on this disk. An error occurred while evaluating JavaAcript for the package. Please help!

My Apple Store, Mail and update was not working for sometimes, when I download OS 10.9.3 and try to install, error message appear: OS X update 10.9.3 can't be installed on this disk. An error occurred while evaluating JavaScript for the package. Please help!

iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), SL & ML, G4 450 MP w/Leopard, 9.2.2

My big old IPod is stuff with an error stating Disk mode at top with a big check mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

My big old IPod is stuff with an error stating Disk mode at top with a big check mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

Try:
HT2519 Pre-ordered album, it says...: Apple Support Communities

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

I have been charge twice for the same app please help

I have been charge twice for the same app please help, I have look for help but no luck,

Contact iTunes Store Customer Service:
Apple - Support - iTunes Store - Contact Us

I can't update my ipad 1st gen.. it says that 4.2 is the latest version. i'm in Lion and my itune are updated to the latest version. please help!!!

i can't update my ipad 1st gen.. it says that 4.2 is the latest version. i'm in Lion and my itune are updated to the latest version. please help!!!

i check everything and it's all up to date....the ipad show up in the device as well.. this is what it looks like

LR2 and PS Eelements8 show different RGB for the same color - Please, HELP

LR2, Elements 8, Color Chart 24 (CC24),
Please help. I may need to reset LR2 to factory default or to something else.
For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0
I have photographed a CC24 in RAW. Opened image in Elements 8 and adjusted Exposure to 243 for the White patch #19
Then with with WB tool clicked on the 50% Gray and then readjusted exposure for the CC24 listed 243 for #19.
Now all Gray patches #19 through #24 as listed in the table or very close R=G=B (243, 200, 160, 122, 85, 52)
The RGB numbers for Red Patch #15 are R=169, G=58, B=63
The CC24 listed RGB for Red patch #15 are R=175, G=54, B=60
Also saved the adjusted image as JPG
Then opened the image in LR2 and adjusted exposure and WB as described above for Elements 8.
The Gray patches #19 through #24 show RGB numbers as listed in the table or very close.
The RGB numbers for the Red patch #15 are R=138, G=84, B=64.
However the CC24 RGB for Red patch #15 are R=175, G=54, B=60
Exported the image as JPG
Then opened the two saved JPG images in Elements. these two images read almost identical RGB numbers for each patch.
How can I fix LR2 RGB reading. Recently I have saved as defaults the tone curve set to Linear, Contrast and Brightness to 0 and probably did it wrong. My be I need to reset LR2 to the factory defaults to restore its correct reading or something else.
Please help.
Leonid

Q1. Is that means that when LR2 Exported RAW to JPG the correct numbers resulted from conversion?
You should be careful with the term RGB numbers. Such numbers are only useful when you know the working space. For example, sRGB, adobeRGB, prophotoRGB, melissaRGB, etc. The numbers I calculated are simply the reference numbers (find them here: http://www.brucelindbloom.com/index.html?ColorCheckerRGB.html ). I recalculated the values in the display space used in Lightroom from Bruce Lindbloom's values in normal prophotoRGB which is a simple arithmetic excercise. When Lightroom exports a jpeg, you can set the color space in the export panel and it will do the conversion for you meaning that it will translate between its internal colorspace and the desired export color space. In an external program, you will usually be working in sRGB, adobeRGB, or prophotoRGB, which are the three main spaces that Lightroom exports to. As you can see from Bruce's tables in the link above the RGB values for these patches in all these spaces are different.
For example RGB for MacBeth CC24 Red patch (#15) was shown as 203, 0, 0 and x-rite RGB is 174, 54, 60.
They are actually the exact same chart. As I say above the values are meaningless if you don't know the colorspace. The first RGB triplet you quote makes no sense at all. It does not correspond to any colorspace listed for the MacBeth chart. The zeros indicate that the color is far outside of the gamut of the used color space, so the value is basically useless. The second is sort of close to the sRGB value.
Q.2 Would it mean that your shown table should not be applied to (used with) x-rite CC24 but to MacBeth only?
They should be pretty good for both as the chart is supposed to be the same.
Q3. Have you created your posted LR table or it was provided by Adobe?
I created it myself. Since you have a colorchecker, you should look into creating a camera profile using it. This can be done with X-rite's excellent passport utility (free download from their website), or with Adobe's free DNG profile Editor. Simply shoot a chart in the right light conditions and run the raw/dng file through this utility and a profile is created that will allow you to get very good color rendering from your camera if you shoot raw.

I can't open any apps I downloaded after connecting to the computer (itunes) for the first time! Help!

I connected my iphone 4s to my macpro for the first time to add some musci, I didn't touch the apps folder.
But after ejecting, I can't open any of the apps I downloaded. When I press on them, they just shake but nothing opens!

You shouldn't. Downloading the app re-authenticated the iTunes account on your phone. This happens to people from time to time (not sure why) but making you are logged into the Apple store in iTunes with your Apple ID prior to syncing might help.

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Please search the forums. This has been covered here extensively.

Carbon Copy and SuperDuper FAILED during copy for the 8th time! PLEASE HELP

Similar Messages

Maybe you are looking for