Card reader error code 31

HP Pavilion p6-2016 Desktop PC :
Device Manager shows Portable Devices--Card Reader--"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". This SD card reader does not recognize when a card is plugged into it.
Also, my Epson Stylus NX230 will not load device driver software. Could they be related?
When I unplug my printer from the USB port & plug it back in it tries to load the driver but fails. I have unistalled & reinstalled the Epson Stylus NX230 Driver Combo Pack (epson14857.exe) and I tried just Epson Stylus NX230 Printer Driver v6.92 (epson14855.exe) to no avail.
 Might I have a hardware failure as they plug into the same area on mother board. Should I just buy a PCI card with USB2 ports? I really don't use the SD card reader.

I downloaded and ran Microsoft Fix It  (MicrosoftFixit.Devices.RNP.12324536404228906.1.3.Run.exe)   and it found both of my problems:
1.) Card Reader has a driver problem.
2.) Hardware changes might not have been detected. (I think this is my printer. I uninstalled & reinstalled the printer driver when it stopped working. Epson Stylus NX230 Driver Combo Pack (epson14857.exe)).
It did not fix either problem.

Similar Messages

  • I can't download photos from my Card. Error Code 0x80010108.What can I do?

    I can't download pictures from my sim card. Error Code 0x80010108. What can I do?

    Try to import from your camera with Image Capture instead of iPhoto. Does that work?
    Do you see your camera as a disk on the Desktop?
    Can you open the image files from te Finder?
    That wizzard-icon is puzzling. Have you used your camera with a PC and perhaps reformatted the SD Card from a different operating system? Then I'd try to import a different SD Card, that has been reformatted in the camera.

  • Cannot install acrobat reader, error code

    Help I cannot insatll acrobat reader, error code #1925, install keeps failing

    Try downloading the offline installer from http://get.adobe.com/reader/enterprise/ and save it to disk, then right-click on the downloaded installer and select Run as Administrator.

  • New network card caused: Error Codes: OAMP2OPY:GIQKCQ7V

    after installing a network card in my OBIEE 11g server
    I get this error:
    Error
    View Display Error
    Error generating view. Error getting cursor in GenerateHead
    Error Details
    Error Codes: OAMP2OPY:GIQKCQ7V
    Too many running queries. Server is too busy to process any more queries at this time.
    the server can still connect to the database..
    the IP address has not changed..
    how do I fix this?

    Metalink ID 1462776.1
    1. The Oracle Database instance is configured by default to run only 150 PROCESSES;
    the maximum load for dedicated connections is determined by the PROCESSES parameter.
    When the listener believes the current number of connections has reached maximum load, it may set the state of the
    service handler for an instance to "blocked" and begin refusing incoming client connections with the following error (in biserver1.log set in debug level):
    "TNS-12516 TNS:listener could not find instance with matching protocol stack"
    Tip:
    Verify the Oracle database processes parameter setting. It is also a good idea to make sure the Oracle database sessions and open cursors settings are large enough.
    2. Increase the number of concurrent client connections (sessions) to OBI server.
    Each client request to OBI Server uses one SERVER_THREAD.
    Each SERVER_THREAD uses 0 or more DB_GATEWAY_THREADs depending upon the number of DB queries executed.
    Following NQSConfig.INI parameters need to be tuned (refer to OBIEE tuning guide for details on initial values to be set):
    [ SERVER ]
    MAX_SESSION_LIMIT
    SERVER_THREAD_RANGE
    DB_GATEWAY_THREAD_RANGE
    3. Cleanup Web catalog via instanceconfig.xml using the steps documented in "Validating the Catalog" in System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
    4. In instanceconfig.xml file for each instance, add the following parameters within Cache/Query tags:
    <Cache>
    <Query>
    <MaxEntries>10000</MaxEntries>
    <AbsoluteMaxEntries>20000</AbsoluteMaxEntries>
    <CruiseEntries>3000</CruiseEntries>
    <ForceLRU>true</ForceLRU>
    </Query>
    </Cache>
    5. Make sure you have enough system resources available on BI Servers (sawserver, nqsserver).
    6. Unstable network connection link between OBIEE servers and Database server.

  • Why won't my Equium A210 enable my SD reader - error code 22

    Can someone please help me?
    My A210 won't read my SD card but it will read my memory stick.
    I have gone into the device manager and it says that the device is disabled (code 22).
    When I try to enable it, a message comes back saying that it wasn't able to do anything. Is this a serious problem?
    Do I need to get my computer looked at by a technician?
    Any help would be great.
    Thanks

    Hi
    Im not sure if this is a serious problem or not but for me it looks more like a software issue which should be solved by driver reinstallation.
    Microsoft said that error Code 22 (This device is disabled) appears because a user disabled it by using Device Manager. To solve it you should click Enable Device.
    If this is not possible then you should reinstall the driver.
    First of all you should download the compatible driver from the Toshiba page.
    Then remove the old driver from the system (in device manger) and then start the new driver installation.
    My opinion this should help.
    Good luck

  • Installing Adobe Reader error code 1328

    Installed what I thought to be Adobe Reader but it was not.  It was a paid site displaying Adobe Reader.
    Now when down loading and attempting to install the correct Adobe Reader I receive an error code 1328.  Error applying patch to file C:\config.Msi\PT3AB.tmp
    I am getting frustrated.
    Using XP on a Dell Inspiron E1505.

    Uninstall the corrupted Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

  • How to read card reader (bar code reader) in simple java program ?

    hai all
    how to manipulate (read/write) card readers (or bar code reader ) in
    a java program ?
    should i import any particular package library ?
    pls give me any sample code or tutorials or tools, etc (whatever you have) .
    i am new to this card reader category
    its very urgent
    thank you .

    Nearly all card readers and barcode readers I've ever seen simply stick their input right onto stdin, so you can capture it just as if it had been typed in on a keyboard

  • Adobe Acrobat Reader error code (103:103)

    I cannot open online PDF files as I keep getting error code (103:103) then asks me to exit and try again.

    The  etc etc refers to the usual standard message as follows - also re Acrobat I was merely repeating the message given.
    'there is a problem with Adobe Acrobat Reader. If it is running exit and try again (103:103)' this was the exact message given. I had version 11.0.08 which I have now deleted and am using an earlier version 10.0.4 which seems to have resolved the problem for the time being

  • Firfox unable to update adobe reader. error code -203. Help

    I am trying to update plug ins. None will update nor can I install new ones. I am referred to the message in the error codes which is...Warning: Unknown property 'zoom'. Declaration dropped.
    Source File: http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
    Line: 1

    Hello Karan,
    Please try installing the Reader from following link:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5863
    Regards,
    Anoop

  • Adobe Reader Error Code 10016 on 2008r2 Servers.  Help!!

    When opening pdf documents with bookmarks I get an error listed in Windows 2008r2 event viewer.  It is error code 10016.  If the pdf does not have bookmarks then I do not get error.  Below is the error message.  It appears to have something to do with Windows Color System, and in particular, wcspluginservice.dll.  I have tried changing the security on the dcom object, but it does not help.  I am having this same issue on multiple servers.  Any help much appreciated.  Thanks.
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
    {69B37063-2BB6-43B5-A109-60E69A77840F}
    and APPID
    {CD11FAB6-1C0E-45E1-BA31-5C6008EF2607}
    to the user XXXXX from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.

    Hi,
    It is 2008r2 64-BIT.  I am using Adobe Reader X 10.1.4.  I am having this issue on all pdfs with bookmarks so not convinced that it is just one particular pdf file.  Also, I have since disabled the "Windows Color System" service, which will now force Windows to open pdfs using native Microsoft color rendering instead of using Adobe's extensions.  This has proven to resolved my issues thus far. 

  • Finger Print Reader Error Code E7210005

    Hi: I've just upgraded by X61 Tablet from Vista to Windows 7. I did a complete reimage of the hard drive.  Installed the latest Finger Print software downloaded yesterday from the Lenovo website for 32 bit WIndows 7.  No problem on install. When I try and enroll my first finger, I get an error message that says "Operation is not allowed by operating system policies.  The error code is E7210005.  This is an error message generated by the THankVantage Fingerprint software and not Windows 7.  I need help on troubleshooting this message.  I have no idea as to what operating system policies they are talking about and where it is located.  I looked at the Windows Security Policy for the local machine and saw nothing that struck me as referring to this issue, but maybe I'm wrong.
    Please advise and give me any suggestions. Thanks.  Nile

    no-one wrote:
    Actually, if you read this post:-
    http://www.codeweblog.com/thinkpad-t61-under-installation-win7-fingerprint-recognition-software-to-s...
    It seems to be Lenovo's wonderful ability to code for a 64Bit Os that seems to be at issue here.Install a 32bit Vista thinkvantage software in a 64bit OS and it works.
    no-one
    Actually parts of the code you refer to are written by Upek and not Lenovo and there is a API so Lenovo and other manufacturers can create their own GUI. Lenovo didn't create the fingerprint software/drivers from scratch on their own, but part of it is actually from Upek with a API for Lenovo and others to make a customized GUI. As the article says the Windows 7 fingerprint software from Upek have the same problem.
    Also skywalkr is correct about the statement that "built-in Administrator account is not allowed to use biometrics". That have to do with the new addition to Windows 7 "Windows Biometric Framework" (WBF). Since Vista don't use WBF that limitation is not in the Vista version of the fingerprint software. This has nothing to do with 32 or 64 bit or that Lenovo is unable to code for a 64 bit OS, but rather the limitation in WBF/Windows 7 like skywalkr already pointed out. Neither do i understand why you refer to 64 bit since Nile clearly stated that he/she is using the 32 bit version of Windows 7.
    -gan

  • UDP read error code 56

    Can anybody know what cause this error and how to solve it?
    Thank you very much!

    Keep getting this error. It is not caused by small number of timeout. I am trying to talk with my device via UDP. When I debug my program, UDP Write is OK, but UDP read alway gets error code 56. Frustrated!!
    Any help is very appreciated!
    Attachments:
    UDP_Test.vi ‏76 KB

  • Adobe Reader Error Code 1310. Error writing to file: C:\ProgramFiles(x86)...

    I have been forced to Sumatra by some error in the system.  When I download Adobe Reader 10, during setup, it stops and produces an error window that says 'Error 131. Error writing to file:  C:\ProgramFiles(x86)\Adobe\Reader10.0\Esl\Aiodlite.dll. Verify you have access to that directory'...Retry? Cancel? Retry. Then continues then stops at 'Error 1310. Error writing to file.....Reader10.0\CoolType.dll. Verify that you.... then Retry again and it finishes. Then all Icons on my desktop become Adobe Icons. When I click on the 'Adobe reader 10.0 Icon it says "Adobe Reader could not open 'AcroRd32.exe' because it is either not a supported file type or the file has been damaged (for example , it was sent as an email attachment was not correctly decoded)." I have been through this many times with Internet Explorer and Safari with only minor differences as Safari doesn't give me the difficulties with the setup but does have the same effect. I have tried to go back to older versions of Adobe Reader..9.0 and 9.3 to the same end. The only thing I can think of is that I removed Zinio Reader 4, that was necessary for the online magazines that I get from Mother Earth News and others, but thought I was having difficulty due to it being the only recent addition to my PC. I think somehow it may have taken something with it. Anyway I'm an older not so computer literate entreprenuer that has been forced to this and man do I need help.

    http://forums.adobe.com/thread/800296?tstart=60

  • TCP Read Error Code 1

    I met a problem in using "TCP Read" in LabView;
    First I use "TCP Open Connection" building connection successful with a instrument; and seem the connection ID as the global,equal to a "TCP Network Connection Refnum";
    Then I use the global as the connection ID,and use "TCP Write" send a command to a instrument;and use "TCP Read" Receive the instrument return message;this time a 56 error occurs,it is normal.
    But after I use this method Send/Receive two times successfully,when i use "TCP Read" receive message, the error 1 occurs,and nothing received.
    In each TCP operation,use the global "TCP Network Connection Refnum" as the "Connection ID" input.
    someone can tell me,why does it occur?

    JiangYu wrote:
    > I met a problem in using "TCP Read" in LabView;<br>First I use
    > "TCP Open Connection" building connection successful with a instrument;
    > and seem the connection ID as the global,equal to a "TCP Network
    > Connection Refnum";<br><br>Then I use the global as the connection ID,
    > and use "TCP Write" send a command to a instrument;and use "TCP Read"
    > Receive the instrument return message;this time a 56 error occurs,it is
    > normal.<br><br>But after I use this method Send/Receive two times successfully,
    > when i use "TCP Read" receive message, the error 1 occurs,and nothing received.
    > In each TCP operation,use the global "TCP Network Connection Refnum"
    > as the "Connection ID" input.<br><br>someone can tell me,why does it occur?
    Ouch, globals! That is usually the first sign of a bad application design.
    For the rest just watch out. LabVIEW refnums are garbage collected
    whenever the VI hierarchy which opened them goes idle (stops executing).
    So Executing a VI which Opens the TCP refnum and writes it into a global
    and then quits and then executing another VI which tries to use that
    refnum from the global will simply fail with error 1 as the refnum has
    been already automagically closed and is therefore invalid.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Adobe error code 111100 $\Users\ user \AppData\Local\Temp\AdobeLeanPrint

    I keep getting Adoe Reader error code 111100 when Avast tries to update. Fix please.

    Hi,
    In regarding of the issue, would you like to give us more information?
    Do you import the Microsoft Office suit Visio diagram to power center? If it is, please give us your steps or some images about the issue.
    Thanks.
    George Zhao
    TechNet Community Support

Maybe you are looking for