Card reader not function

hi everyone, sorry for my english.
i have a problem, my mac late 2011 have a problem with internal card reader. in the system setting the card reader is not present. appear " this mac not have a internal apple card reader" but obviously the card reader are present.
i have done reset PRAM/NVRAM. do you have solution?
thanks in advance.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

HP GS60 - SD Card Reader Not functioning or visible in My Computer

HP GS60 Product Number FS184UA
Windows 7 Service Pack 1 (32 bit)
Serial number (S/N): 2CE835J6V5
I'm an avid photographer. I have run Windows 7 since shortly after it came out. I have been using the reader regularly since Nov 2009. (actually, I was using it earlier under Vista as well). In December 2011 the internal SD Card Reader on the HP G60-120US ceased to function. I insert a SDHC card and it does not show up in my computer.
Right or wrong I've taken the following actions to try and resolve this issue:
1) Reinstalled Realtek USB 2.0 drivers from the HP site.
2.) Reflashed the BIOS. It was already at the current version F.54 A - I reflashed it anyway.
3). Deleted all devices under Universal Serial Bus Controllers and allowed them to readd automatically.
The re-add of the USB controllers went well enough although it did not solve the problem.
Confirmed that my SDHC cards are good by both using multiple cards in the slot and, when that didn't work, I inserted the cards back into the camera and connected the cards to the computer via a USB cable to the camera. That worked fine (not desirable as it's so much slower).
Confirmed that all my standard USB ports worked fine by attaching other devices to it. They work fine.
What might be relevant is that I do not see anything under disk drives that would look similar to this:
Generic SD/MMC
Should there be? I'm not certain.
If there should be, how can I get it readded back in?
Currently, the only item under disk drives is the ATA drive where the o/s resides.
What is the proper device related entry for the SD card reader for the HP GS60-120US that should be present in the Device Manager?
I cannot tie the failure to any particular software change. While I used the card reader often I do not use it daily. A windows update could have come in, disturbed things but I might not have become aware of the impact to the card reader even if it was an update that did it.

Hi @rlstockwell
I understand that you are looking for some help in how to use the SD reader on your notebook. I am happy to help with this.
I would recommend taking a look at this page from windows.microsoft.com. If gives an overview of how to do things.
Using flash memory cards
Let me know if that works for you, or if you need more.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

SD card reader not functioning after update to Mavericks

SD card reader no longer functioning after update to Mavericks

Had the same problem.
In Terminal, enter the command
Killall Finder
Worked for me - - SD card showed up when I next inserted it.

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

Z61t SD card reader not working?

z61t SD card reader not working?
Tried the Vista driver and still not working.
Same for camera.
I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

I am running windows 7 home 32 bit and can not get the sd card reader driver to load either. Any help?

Dc7800 "smart card reader not present" during POST

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes, and have tried putting a BIOS .bin file on a FAT32 USB key in an attempt to use the BIOS recovery option, none of which has worked.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.
TIA,
JS

Hi:
After doing some research on the message, I came across this post.
I guess your PC has a smart card optional system.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

Memory card reader not working

Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
Where can I find download for original driver.
This question was solved.
View Solution.

http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

HP Probook 450 GO laptop SD card reader not working

SD card reader not recognizing any sd card and not working. Any suggestions?
+ Touch pad not working with double click - have to use the button below

Hello @Jurists
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G0 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 450 G0 Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Envy Touchsmart 15-J104sa Memory Card Reader not working

I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
Thank you all.
This question was solved.
View Solution.

Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

SD Card Reader Not Recognizing in i7

Hello,
We got our MBP last fall(2.66 i7) and another one last summer(2.53 i5) and just recently began using SD cards for video.
We can take an SD card right out of the camera and insert it into the i5's reader and it functions without a hitch.
When we try the same thing with the i7, nothing happens whatsoever. No drive on the desktop, in the finder, nothing in disk utility.
Anyone have any ideas?
Thanks!

This is now a known issue, and I have sent my mackbook pro 13" i7 back into engineering for evaluation (EFFA). Hopefully they will come up with a fx sooner than later. Appears to be a compatibilty issue with Sandisk Extreme Pro 45MB/S SDHC cards (Class 10 as I recall). I purchased a new macbook pro 13" i7 a few days ago, and found that the card reader did not recognize the above referenced card. The reader did recognize the 30MB/S Sandisk card (both 8GB), and the most recently "retired" macbook pros recognized both cards, as do the current iMacs.
They had me EFFA back the machine, and provided me with a new one. I tested the new one right out of the box and it worked fine, but after Migration, it no longer worked. Restoring using the included disk back to factory specs DID NOT restore the ability to read the card.
In checking random machines at the apple store, only 1 on the entire floor recognized that a card was inserted, when I tried the Sandisk SDHC Extreme Pro 8GB 45MB/S card.
Whatever the issue, it is rather odd that it seemed to have been ported over during Migration, but was not "fixed" after wiping and reformatting the HD using the supplied disk.
As it appeared that my machine will be the first to have been EFFA'd, as they now have it, we can hope they come up with a fix soon.
It does not appear to be hardware related, according to Apple Techs I am communicating with, so pushing on the card and other such things are probably not a good idea, and should be avoided.
Interestingly enough, with the first machine I had, a workaround was possible by restarting the machine with the card already inserted, however, unfortunately, that workaround does nopt work with my current "defective" machine.
I have also advised Sandisk.
Hope this helps......

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Why does my card reader not work on my iPad since upgrade?

I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

No but I was just trying to find a way in to your help desk. I didn't find
your web page very helpful in this regard.
Douglas Whiteley
In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected]
writes:
Re: why does my adobe reader not work
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4395059#4395059)

Card reader not function

Similar Messages

Maybe you are looking for