Cardbus VGA for better performance?

In the past, was some special designed VGA card (by the IBM, too). Some of these could connect to the PC through the cardbus interface. Anyway, I am not an engineer. So I do not know this is possible or not. But I can imagine a special cardbus VGA which can improve the standard netbooks graphical performance. The netbooks are a special part of the PCs - I know - with poor graphical performance. This is a fact. I read in an article that, about 30% of netbooks returned to the merchants because the owners were not satisfied with them. So, I think that, my imagine is not a folly. If I know well, the cardbus slot of Lenovo netbooks have PCI-E 1x interface which is equals about the speed of an AGP 8x interface. I think that, this is enough for a better graphical performance, if the GPU has real power. I think the philosophy of PCs something similar: Build your PC for what you want! I know that too, the netbooks with ION platform will arrive soon. But this is the future and many people have a netbook in the present. Maybe some of them would be happy if they could upgrade their netbooks. I like my netbook, but I could like better if I could upgrade it.
Sorry, for my English, I hope that was understandable what I would like to ask.

Thank you for the answer! If the spec that you are linking to is the latest then my measurements are not that far from the "typical" curve showed in figure 1. The spec that I have is more optimistic, showing a flat curve all the way up to 200kHz. The 50 dB that you are talking about is specified when the channels are used in unbalanced differential mode. This means that one signal is applied to the "shield" of the coaxial cable, giving the 5922 two differential channels. I want to verify the CMRR when two channels are used as one "real" differential channel and the CMRR for that is in figure 1. Best RegardsStefan Johansson

Similar Messages

HT5299 can i connect my sony smart TV via thunderbolt port for better resolution.

can i connect my sony smart TV via thunderbolt port for better resolution.

You can connect the TV via the Thunderbolt port. However if the result is "better resolution" would depend on what resolution you have now (I'm guessing you mean with the HDMI adapter?)
I'm myself connecting the Mini Mac with a Thunderbolt->VGA adapter to my TV and get full 1920x1080 resolution.
Have you checked your Display settings? Make sure mirroring is off, then check what resolutions you can get on the current connection.
Please return with some more data.

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
Kevin

I recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

I need a clarification : Can I use EJBs instead of helper classes for better performance and less network traffic?

My application was designed based on MVC Architecture. But I made some changes to HMV base on my requirements. Servlet invoke helper classes, helper class uses EJBs to communicate with the database. Jsps also uses EJBs to backtrack the results.
I have two EJBs(Stateless), one Servlet, nearly 70 helperclasses, and nearly 800 jsps. Servlet acts as Controler and all database transactions done through EJBs only. Helper classes are having business logic. Based on the request relevant helper classed is invoked by the Servlet, and all database transactions are done through EJBs. Session scope is 'Page' only.
Now I am planning to use EJBs(for business logic) instead on Helper Classes. But before going to do that I need some clarification regarding Network traffic and for better usage of Container resources.
Please suggest me which method (is Helper classes or Using EJBs) is perferable
1) to get better performance and.
2) for less network traffic
3) for better container resource utilization
I thought if I use EJBs, then the network traffic will increase. Because every time it make a remote call to EJBs.
Please give detailed explanation.
thank you,
sudheer

Please suggest me which method (is Helper classes or Using EJBs) is perferable :
1) to get better performance
EJB's have quite a lot of overhead associated with them to support transactions and remoteability. A non-EJB helper class will almost always outperform an EJB. Often considerably. If you plan on making your 70 helper classes EJB's you should expect to see a dramatic decrease in maximum throughput.
2) for less network traffic
There should be no difference. Both architectures will probably make the exact same JDBC calls from the RDBMS's perspective. And since the EJB's and JSP's are co-located there won't be any other additional overhead there either. (You are co-locating your JSP's and EJB's, aren't you?)
3) for better container resource utilization
Again, the EJB version will consume a lot more container resources.

Best Bit Rate for Better sound

I’m new to the iTunes/iPod thing. A friend told me that he re-sets the bit rate from the default of 128 kpbs to the top of 320 kbps for better quality. [He plays everything off of his computer which is wired to speakers throughout his house and does not travel or drive much so hardly uses his iPod.] I played around a tad with the various rates on the same album and found that a fairly short one used 34.9 MB at 128 kbps, 52.1 MB at 192 kbps, 60.8 MB at 224 kbps and 86.6 MB at 340 kbps. Another friend told me that he noticed a big difference when he played a song off his iPod through his several thousand dollar system if it was imported at 128 kbps. While hard disc space is cheap and I would simply opt for the higher quality setting, the iPods are not so big when one almost triples the file size.
I tried to figure out what the max bit rates in the CDs are so that could guide the max import rate, but I could not and that question may make no sense at all anyway.
What is the max that a human can notice the difference at and what have folks found to be the best balance between sound quality and storage space?
Thanks for your help.
PC Windows XP

Monty, this is really going to be up to your ears to decide. All I can tell you is my experience during the 2+ years of owning an iPod. I initially thought AAC @ 128 was satisfactory. I then started experimenting with various bitrates, but kept the AAC format. I decided that 192 was a discernible improvement over the 128. Not to go into a lot of detail, but I, quite by accident, had one album download at 256 & thought, "Wow, this is unbelievably better sound, even over inexpensive computer speakers." At that point, I started importing everything in AAC @ 256 VBR which I feel is pretty darn close to CD quality sound. I have a 60GB iPod that I'm willing to sacrifice some capacity in order to ensure the best audio quality I can. This is also why I do not buy frequently from the iTunes store as I do not feel the 128 downloads are the best quality. I buy & my own CD's, now, to insure good quality. I will by the occasional song from the store when I do not care to buy the whole CD. Hope this helps!

Ipad Mini to DVD for better audio?

For iPad Mini, I want to output signal to DVD HDMI port for better 5.1 sound. Is that possible? Is splitter required? Presently I am using the Lightning Digital AV Adapter to connect Ipad mini directly to TV, but that limits audio to TV's speakers. Would prefer to use home theater if I can.

1. Send by email
2. Use Dropbox

Micro usb to vga for tablet A8

I want to Micro usb to vga for tablet A8?

This feature is not supported by the Lumia 710 but yiu can try streaming wirelessly to,your tv using dlna with the Play To app.

I have had trim enabled but it seems for better security Apple want it turned off in Yosemite

Hi I have a Macbook pro Early 2011 with 8gb of ram and a 126gb ssd and I have just upgraded to Yosemite. The first login to Yosemite I got a message saying Tim enabler was not active & then I realised that my version did not run on the latest version of OSX. A quick Google search I came across this article http://www.cindori.org/status-of-trim-enabler-in-yosemite/ could anyone give any advice on weather my sandisk SSD (ww.amazon.co.uk/SanDisk-128-Inch-Internal-SDSSDP-128G-G25/dp/B007ZW2LY4/ref=sr _1_5?ie=UTF8&qid=1413742364&sr=8-5&keywords=sandisk+ssd) will run ok without trim since I installed it, I have had trim enabled and it has been fine but it seems for better security apple want it turned off in Yosemite and I don't what the best thing to do is.
Thanks
<Re-Titled By Host>

Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it.

Scale out SSAS server for better performance

HI
i have a sharepoint farm
running performance point service in a server where ANaylysis srver,reporting server installed
and we have anyalysis server dbs and cubes
and a wfe server where secure store service running
we have
1) application server + domain controller
2) two wfes
1) sql server sharepoint
1) SSAS server ( analysis server dbs+ reporting server)
here how i scaled out my SSAS server for better performance
adil

Just trying to get a definitive answer to the question of can we use a Shared VHDX in a SOFS Cluster which will be used to store VHDX files?
We have a 2012 R2 RDS Solution and store the User Profile Disks (UPD) on a SOFS Cluster that uses "traditional" storage from a SAN. We are planning on creating a new SOFS Cluster and wondered if we can use a shared VHDX instead of CSV as the storage that
will then be used to store the UPDs (one VHDX file per user).
Cheers for now
Russell
Sure you can do it. See:
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
Scenario 2: Hyper-V failover cluster using file-based storage in a separate Scale-Out File Server
This scenario uses Server Message Block (SMB) file-based storage as the location of the shared .vhdx files. You must deploy a Scale-Out File Server and create an SMB file share as the storage location. You also need a separate Hyper-V failover cluster.
The following table describes the physical host prerequisites.
Cluster Type
Requirements
Scale-Out File Server
At least two servers that are running Windows Server 2012 R2.
The servers must be members of the same Active Directory domain.
The servers must meet the requirements for failover clustering.
For more information, see Failover Clustering Hardware Requirements and Storage Options and Validate
Hardware for a Failover Cluster.
The servers must have access to block-level storage, which you can add as shared storage to the physical cluster. This storage can be iSCSI, Fibre Channel, SAS, or clustered storage spaces that use a set of shared SAS JBOD enclosures.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Acrobat X: Is there an ABBYY FineReader plugin for better OCR accuracy?

Acrobat X's OCR capability is not very good. Based on my testing and comparisons, ABBYY FineReader's OCR capability is much better! Is there a FineReader plugin that can be added to Acrobat X for better OCR accuracy? If not, can this be a possibility in the future?

ABBYY FineReader is often better, but sometimes Acrobat OCR is better. On some texts Acrobat recognizes word boundaries where FineReader returns multiple consecutive words as a single very long word.

Burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one?

burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one? I remember with a PC being able to defrag.

You could buy an external dvd/cd drive.
Suggest other world computing.
You need to delete some files. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
This will save you a gig of space.
Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
http://monolingual.sourceforge.net/
A detailed write-up on how to use Monolingual:
http://www.jklstudios.com/misc/monolingual.html
(3)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(4)
Buy an external firewire harddrive.
(5)
Buy a flash card.

[svn:fx-beta1] 6996: Fixed 2 bugs for beta.

Revision: 6996
Author:   [email protected]
Date:     2009-05-17 09:53:54 -0700 (Sun, 17 May 2009)
Log Message:
Fixed 2 bugs for beta. One caused a problem when running Rotate3D and Move in parallel. The other caused an RTE in some transitions.
QE Notes: -
Doc Notes: None
Bugs: SDK-21166, SDK-21181
Reviewer: Jason (UIComponent), Ely (AdvancedLayoutFeatures)
Tests: checkintests, Mustella effects, layout, group, layout3d, Transition
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21166
    http://bugs.adobe.com/jira/browse/SDK-21181
Modified Paths:
    flex/sdk/branches/beta1/frameworks/projects/framework/src/mx/core/AdvancedLayoutFeatures. as
    flex/sdk/branches/beta1/frameworks/projects/framework/src/mx/core/UIComponent.as

Need external monitor for better visibility. Which ones are compatible with MacBook Pro?, Need external monitor for better visibility. Which ones are compatible with MacBook Pro?

I need to set up a home office using my MacBook Pro. Does anyone know of brands of flat-screen monitors that I can plug into my laptop in order to enlarge documents for better visibiilty? I have 2 perfectly good flat screen monitors that work with Windows but they have no drivers compatible with Apple products.
Thanks.

Apple has a 27" monitor with 2560 x 1440 resolution. It has everything going for it but it has a price of $999 (ouch). Check with OWC, they specialize in Apple peripherals, have decent prices and a good reputation.
Caio.

Installed Beta 8 -- now version 3.6.13 is using settings used for Beta 8 ????

Installed V4 Beta 8 -- now version 3.6.13 is using settings used for Beta 8 ????
I thought you are supposed to be able to run the 2 as different programs with different settings, but this is not the case for me right now.
What am I doing wrong?
I downloaded the new version of 3.6.13 as an upgrade from 3.6.12 which has been used just fine.
I then downloaded and installed Firefox version 4 Beta 8.
When I opened beta 8 I started making some adjustments to put a few thing in there that I really like and started upgrading some of the add-ons that say they were not compatible, etc, etc, etc.....
...got to a place I was fairly happy with ere I was at enough to "Test beta 4' out --- like I thought I was supposed to be able to do ---
went back to open up normal firefox 3.6.13 and --whoa!!-- it has the settings of everything I just has set up for the Beta!!!! aughhhh!!!!!
I really need to know how to get my 3.6.13 settings back to how the were and use Beta 8 as a separate program like it states you can.
Thanks
.

Makes enough sense and I thought it might be a profile issue, but only after the fact, so why does is not say this upfront ...
In the release notes I find this about installation:
-- and exactly what I read:
[[http://www.mozilla.com/en-US/firefox/4.0b7/releasenotes/]]
Installing
Please note that installing Firefox 4 Beta will not overwrite your existing installation of Firefox. You won’t lose any of your bookmarks or browsing history, but some of your extensions and other add-ons might not work until updates for them are made available.
nothing more nothing less... nowhere in that installation process does it say, state or imply -- Create a new profile first -- or see xxxxx article about using betas /pre-release, etc...
Well, I could cry about it more, but I guess not too many other people have had this problem, I did search a bit before posting my question , and I consider myself pretty competent about this kind of stuff..
Next task ... ... ... Is there any place a backup is stored in the profile folders that have maybe my 3.6.12 Extensions and Extensions settings????
I know the main folder is located here " %APPDATA%\Mozilla\Firefox\Profiles\ "
but I am not currently on that particular PC to look at it to see if I can figure it out myself.
So any help will be GREATLY appreciated!!!
I may have a backup created recently with MozBackup 1.4.10, but again I will have to look on that PC when I get back there tomorrow... ... ...
So any help will be GREATLY appreciated!!!
Thanks for your time
...

Installed Beta 8 -- now version 3.6.13 is using settings used for Beta 8 ???? [Duplicate of /questions/774245]

Installed V4 Beta 8 -- now version 3.6.13 is using settings used for Beta 8 ????
I thought you are supposed to be able to run the 2 as different programs with different settings, but this is not the case for me right now.
What am I doing wrong?
I downloaded the new version of 3.6.13 as an upgrade from 3.6.12 which has been used just fine.
I then downloaded and installed Firefox version 4 Beta 8.
When I opened beta 8 I started making some adjustments to put a few thing in there that I really like and started upgrading some of the add-ons that say they were not compatible, etc, etc, etc.....
...got to a place I was fairly happy with ere I was at enough to "Test beta 4' out --- like I thought I was supposed to be able to do ---
went back to open up normal firefox 3.6.13 and --whoa!!-- it has the settings of everything I just has set up for the Beta!!!! aughhhh!!!!!
I really need to know how to get my 3.6.13 settings back to how the were and use Beta 8 as a separate program like it states you can.
Thanks
.

Makes enough sense and I thought it might be a profile issue, but only after the fact, so why does is not say this upfront ...
In the release notes I find this about installation:
-- and exactly what I read:
[[http://www.mozilla.com/en-US/firefox/4.0b7/releasenotes/]]
Installing
Please note that installing Firefox 4 Beta will not overwrite your existing installation of Firefox. You won’t lose any of your bookmarks or browsing history, but some of your extensions and other add-ons might not work until updates for them are made available.
nothing more nothing less... nowhere in that installation process does it say, state or imply -- Create a new profile first -- or see xxxxx article about using betas /pre-release, etc...
Well, I could cry about it more, but I guess not too many other people have had this problem, I did search a bit before posting my question , and I consider myself pretty competent about this kind of stuff..
Next task ... ... ... Is there any place a backup is stored in the profile folders that have maybe my 3.6.12 Extensions and Extensions settings????
I know the main folder is located here " %APPDATA%\Mozilla\Firefox\Profiles\ "
but I am not currently on that particular PC to look at it to see if I can figure it out myself.
So any help will be GREATLY appreciated!!!
I may have a backup created recently with MozBackup 1.4.10, but again I will have to look on that PC when I get back there tomorrow... ... ...
So any help will be GREATLY appreciated!!!
Thanks for your time
...

Cardbus VGA for better performanc​e?

Similar Messages

Maybe you are looking for

Cardbus VGA for better performance?