Cardreader with Memory Stick doesnt work

Hello,
I have the following problem with my mega pc 180 deluxe: the cardreader dont read my Sony Memory Stick (the normal one not the pro). In this cardreader (the right one) a secure digital card works fine.
Whats the problem? and how can i solve it?
Thanx for any reaction,
Gert-Jan

Are you sure whether this cardreader support Sony Memory Stick or not?
I don't think so but... never tried that  so...  

Similar Messages

  • Scrolling and rightclicking with magic mouse doesnt  work anymore

    Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

    Also tried the universal access thing. Doesnt work.

  • Low data transfer with memory stick on a Satellite A100-207

    Hi, whenever I stick the memory stick from my Sony Ericsson P990i Smartphone into my notebook it says it has detected new hardware and needs to reboot to use it.
    I kinda expected this first time, but it does it EVERY TIME now. Which means transfering files onto the memory stick takes a lot longer than it should and it is far easier (but a lot less convient) to transfer them via my network to my main home PC and use the card reader in my Epson printer to put the files on the memory stick.
    Anyone know why this happens and how to stop it. I need to regularly update files on the memory stick as they are edited both on the laptop and the phone (via QucikOffice which comes pre-installed and alows editing of word and excel files).
    Any help or ideas is appreicated.
    Andy

    I agree with Andrej. You should be 100% sure that this card is compatible with the card reader on the notebook.
    Furthermore what transfer rate do you expect?
    I think every card has different write/read access times. So do not compare it with other cards.

  • Copying to Memory Stick stopped working?

    Hey-
    I was copying from my iTunes library to a Memory Stick by dragging and dropping. I copied 96 tunes, and when I tried to copy another one, nothing happened. There is 1.5G space left, yet I can't drag and drop my tunes onto the card.
    Anyone know what gives??
    Andy

    Hello welcome to the forum,
    Why did you flash the BIOS in the first place?
    Because you're having problems with the newly flashed BIOS, I recommend your flash back to you old one.

  • USB external HD suddenly doesn't get recognized ... same with memory sticks

    I used an old Trekstor HD for TimeMachine. Worked just fine. Then, from one month to another (I kinda neglected making backups :P) the HD doesn't register when I plug it in. No sign that the MacBook even noticed that I stuck something inside it's USB port.
    But:
    * The HD works. It gets recognized just fine under windows (although windows can't read the drive).
    * The USB port works. iPod syncs just fine, USB printer prints, USB mouse mouses ...
    * other USB memory sticks are not recognized either. They work in the PC, but not in the MacBook.
    I can just assume that there's some setting that prevents OS X from hooking up external harddrives.
    I have absolutely no idea what I can do about it. Help please?
    Running OS X 10.5.8
    Message was edited by: arotto

    +old Trekstor HD+ may be clue.
    Possible HDD died, but your Win still sees something becuase USB port functions.
    Next time you plug the HDD into your MB, use System Profiler to check it.
    That may be best clue to see health of the HDD.
    And consider getting a new external HDD, at least as backup for your backup.
    Cheers!

  • MYSQL backup, mysql -e "FLUSH TABLES WITH READ LOCK" doesnt work

    I want to backup mysql locking tables first using flush tables with readlock, then do rsync and then unlock tables.
    I want to do it automatically using script.
    When I log in to mysql using: mysql -u root -p
    the command:
    FLUSH TABLES WITH READ LOCK;
    works and locks the tables...but when I create my.cnf with login information to mysql:
    [client]
    user=root
    password=xxx
    the command:
    mysql -e "SHOW DATABASES"
    works and shows the databases....
    but when I run this command:
    mysql -e "FLUSH TABLES WITH READ LOCK"
    it doesnt lock the tables...why?
    thanks

    Are calling the 'mysql -e' command as your user or as root? If you call it as root (typical for a backup script), then the .my.cnf file needs to be in /root instead of $HOME.
    Scott

  • Edit photo in external editor with LR adjustment doesnt work

    Hi, Im on Win xp sp2 LR 1.2.
    When i try the "edit a copy with lightroom adjustments" i get a Warning and the following massage: "Lightroom was unable to prepare the selected file (name) for editing, It will not be opened.". Whats weird is that lightroom creates the file and its right there if i go to that folder, it just doest open the external editor to continue and edit the file.
    -Notice that "Edit a copy" or "Edit original" works! so there is a connection between the apps but it doesn't work with this option checked.
    I did a test and created a new catalog, added some pics to it and tried the same procedure and it works just fine, so that leads me to think that its a catalog related problem but thats why im here, to ask you guys.
    -Ive read other posts of the same Warning Massage but its not the same problem im experiencing.
    Have a catalog of 25000 photos, im sure its not a lot to some but it has all sorts of collections and tags and colors (u know, the usual mess) so i wanna avoid going into "export as catalog" feature and re-import my catalog all over again.
    Maybe its a registry problem maybe not.
    Any help is welcome, thanks.

    I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

  • Proxy Setup LMS3.2 with Proxyless/transparent doesnt work

    Hello,
    For CCO connection we need a proxyless connection (transparent proxy without the need for Proxy-IP/Port/User, working IE settings are for Direct Internet connections) but LMS3.2 isnt able to provide this:
    1. Proxy Server Setup doesnt accept "No Proxy" or empty Proxy fileds
    2. SW Center Please => SW-Update brings after entering my CCO-Account:
    ERROR: Unable to connect to Cisco.com. Please check D:/PROGRA~2/CSCOpx/log/psu.log file for details. Download operation cannot proceed.
    => check psu.log:
    [ Mon Jan 25 17:48:30 CET 2010 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    [ Mon Jan 25 17:48:30 CET 2010 ] INFO   [SecurityHandler : getCSProxyPort]  : No proxy port confgured
    [ Mon Jan 25 17:48:35 CET 2010 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    Is there any workarround to can use proxless connection for CCO-Access from LMS?
    Steffen

    If the proxying is transparent to the client, then there is nothing you need to do in LMS.  The "No proxy" messages in the psu.log are informational.  Technically, you do not have a proxy, and that is fine.  If the transparent proxy is configured to intercept HTTP traffic, then things should just work.  LMS should be able to connect to Cisco.com just fine without proxy settings.  If you need to see why this isn't working, start a sniffer trace filtering on tcp/80 traffic to www.cisco.com.  Run the software update job, and the capture should show the problem.

  • Confused with updates which doesnt work

    Hey everyone! im new here, and well is the first time also i use an ipod... all was cool with my lil new toy but then something hapened and im not really sure whats happening. Well i downlaoded the lastest update for ipod and well i have to fight with my laptop sometimes cause it doesnt recognice my ipod! it makes the sound of conecting a device and the screen of the ipod says no disconect and then goes back like if i never conected...the worst of all is than i use this alot for music, movies for my large ours in trafic but now my ipod says than doesnt have songs or stuff, but when i can make my laptop recognices the ipod it plays the music and stuff...and well i use it alot as a portable hd cause i have stuff to keep and do later and i though it was for all the stuff i put on the ipod...i really dont want to restore it again
    can someone help me?
    sorry for the big question im kinda desesperate and about to jump from the bridge

    Settings>General>Reset>Reset Network Settings.
    If that doesn't fix it, contact your carrier.

  • Starting app with -jar : classpath  doesnt work

    I have a jar file called netcdfAll.jar with this manifest:
    Manifest-Version: 1.0
    Created-By: Apache Ant 1.5.1
    Main-Class: ucar.nc2.ui.ToolsUI
    Class-Path: prefsAll.jar units.jar HTTPClient.jar jdom.jar
    Built-By: john
    Built-On: 2003-12-04 18:36:43
    but i get this error
    + java -Xmx512m -jar netcdfAll.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: ucar/util/prefs/XMLStore
    at ucar.nc2.ui.ToolsUI.main(ToolsUI.java:761)
    but with no other changes this works:
    + java -Xmx512m -classpath netcdfAll.jar;prefsAll.jar;units.jar;HTTPClient.jar;jdom.jar ucar.nc2.ui.ToolsUI
    sorry to be so stupid, but i cant seem to see whats wrong here. the manifest is not wrapping to the next line. can anyone help?
    BTW, heres an octal dump:
    $ od -bc MANIFEST.MF
    0000000 115 141 156 151 146 145 163 164 055 126 145 162 163 151 157 156
    M a n i f e s t - V e r s i o n
    0000020 072 040 061 056 060 015 012 103 162 145 141 164 145 144 055 102
    : 1 . 0 \r \n C r e a t e d - B
    0000040 171 072 040 101 160 141 143 150 145 040 101 156 164 040 061 056
    y : A p a c h e A n t 1 .
    0000060 065 056 061 015 012 115 141 151 156 055 103 154 141 163 163 072
    5 . 1 \r \n M a i n - C l a s s :
    0000100 040 165 143 141 162 056 156 143 062 056 165 151 056 124 157 157
    u c a r . n c 2 . u i . T o o
    0000120 154 163 125 111 015 012 103 154 141 163 163 055 120 141 164 150
    l s U I \r \n C l a s s - P a t h
    0000140 072 040 160 162 145 146 163 101 154 154 056 152 141 162 040 165
    : p r e f s A l l . j a r u
    0000160 156 151 164 163 056 152 141 162 040 110 124 124 120 103 154 151
    n i t s . j a r H T T P C l i
    0000200 145 156 164 056 152 141 162 040 152 144 157 155 056 152 141 162
    e n t . j a r j d o m . j a r
    0000220 015 012 102 165 151 154 164 055 102 171 072 040 152 157 150 156
    \r \n B u i l t - B y : j o h n
    0000240 015 012 102 165 151 154 164 055 117 156 072 040 062 060 060 063
    \r \n B u i l t - O n : 2 0 0 3
    0000260 055 061 062 055 060 064 040 061 070 072 063 066 072 064 063 015
    - 1 2 - 0 4 1 8 : 3 6 : 4 3 \r
    0000300 012 015 012
    \n \r \n
    0000303

    it appears to be a bug in ant, i have submitted an error report to them.
    http://issues.apache.org/bugzilla/show_bug.cgi?id=25255
    i will say that whatever is failing is not obvious, that the "good" and "bad" manifest files seem identical except for the ordering.
    $ cat manifest.bad
    Manifest-Version: 1.0
    Created-By: Apache Ant 1.5.1
    Main-Class: ucar.nc2.ui.ToolsUI
    Class-Path: prefsAll.jar HTTPClient.jar units.jar jdom.jar
    $ cat manifest.good
    Manifest-Version: 1.0
    Class-Path: prefsAll.jar HTTPClient.jar units.jar jdom.jar
    Created-By: Apache Ant 1.5.1
    Main-Class: ucar.nc2.ui.ToolsUI

  • Registering the Iphone with AT&T doesnt work =/

    I bought the phone in the states, I live in Sweden. When using Itunes 10.5 I cant register the phone with AT&T as I am promted to do. Thus it renders my phone unusable. The exakt problem is that i fill in the form they require but on the last page (of 3) there is the "terms and conditions"-page, it shows blank (not text) and only the continue button and the "I accept"button shows. I fill in the "I agree"button but nothing happens when I clikc on the continue button. How can I get around this?

    Your USA phone will be carrier locked to AT&T in the US.  It will not work with any foreign carrier, including AT&T outside of the USA.  Nor will AT&T unlock it (they simply don't unlock phones) and they would be the only ones who could do so.
    You can buy unlocked iPhones in the USA, direct from Apple, but no carrier in the USA sells unlocked iPhones, and even at an Apple store, you would need to specifically request an unlocked phone and pay full retail prices (current unlocked iPhone 4 is $549.00 USD).
    About all you can do is return it, if possible, or sell it online perhaps.

  • Personalization: Property with type="Date" doesnt work

    Hi,
    I am trying to personalize a property whose type is Date.
    <property name="DoB" value="19820117">
                <property name="Personalization" value="dialog"/>
                <property name="type" value="date"/>
    </property>
    Though i get the calendar icon and am able to <b>personalize</b> the property, the value doesn't reflect when i try to write it using response.write(). Its always "19820117".
    What could be the issue? I have another property with type=String and it works as expected.
    Thanks,
    Shruti

    Hi
    did u import util.date() in the component.
    did u write correct functionality in development for date.
    send test mail i will send one word doc related to this
    Regards
    Sunil
    [email protected]

  • Compare with unedited image doesnt work

    hi
    i started my first project in lightroom, and i use to change the look of my images in the development section every day again (a bit here, a bit there).
    when i press before/after, LR5 only shows the version i did yesterday and the one from now, today, how can i see the unedited version of the image, which i imported last week?
    thanks
    peter

    Here is one way to do it:
    Activate Before/After, then on the Before/After toolbar options below the pair of images:
    Click the Copy After to Before button (the arrow pointing from the right-side to the left) so that both Before and After are your latest adjustments.
    Click Reset at the bottom right in Develop to reset the After view.
    Click Swap Before/After (the double-arrows pointing left-to-right and right-to-left) to put the Reset one at the left and the After one with your current settings.
    This will leave a trail in history so you may not want to do it this way.
    You can also, in place of doing the Reset, click on one of the history steps, then swap Before and After.  This will compare the current settings to that older history step.

  • Af:tree with master-detail doesnt work

    Hi,
    I created master-detail(used updateable VO's) and test it from the application module and everything worked as expected.
    Now I try to show all master and detail data in af:tree component.
    At the runtime I can see only master data, but there's no detail data at all. I tried all of this before and everything worked fine, and now I cant get this work.
    <!-- jsf page page1.jspx-->
    <af:tree value="#{bindings.Master1.treeModel}"
    var="node">
    <f:facet name="nodeStamp">
    <af:outputText value="#{node}"/>
    </f:facet>
    </af:tree>
    <?xml version="1.0" encoding="UTF-8" ?>
    <pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
    version="10.1.3.39.84" id="app_page1PageDef"
    Package="main.userinterface.pageDefs">
    <parameters/>
    <executables>
    <iterator id="Master1Iterator" RangeSize="10"
    Binds="Master1" DataControl="AppModuleServiceDataControl"/>
    </executables>
    <bindings>
    <tree id="Master1" IterBinding="Master1Iterator">
    <AttrNames>
    <Item Value="IdMaster1"/>
    <Item Value="Name"/>
    <Item Value="MasterValue1"/>
    <Item Value="MasterValue2"/>
    <Item Value="MasterValue3"/>
    </AttrNames>
    <nodeDefinition DefName="main.datamodel.queries.Master1"
    id="Master1Node">
    <AttrNames>
    <Item Value="MasterValue1"/>
    </AttrNames>
    <Accessors>
    <Item Value="Detail1"/>
    </Accessors>
    </nodeDefinition>
    <nodeDefinition DefName="main.datamodel.queries.Detail1"
    id="Detail1Node">
    <AttrNames>
    <Item Value="DetailValue1"/>
    </AttrNames>
    </nodeDefinition>
    </tree>
    </bindings>
    </pageDefinition>
    Thank you in advance.
    Alex

    Note, that PanelCollection is a naming container. So if you have wrapped your table in a PanelCollection you will have to add PanelCollection's ID to master table's ID when refering the master table as a partial trigger for the detail one. For example, if the value of detail table's partialTriggers attribute has been <tt>partialTriggers="::masterTable"</tt> now it should become <tt>partialTriggers="::pnlColl:materTable"</tt> (supposing that PanelCollection's ID is <tt>pnlColl</tt>).

  • Startup with option key doesnt work; now I'm stuck a startup cd

    Background: I wanted to defrag my hard drive. I tried to start up from a Norton SystemsWorks cd (using the option key). That didn't work, so I (stupidly!!!!) used the control panel to change the startup disk to the Norton CD.
    Result:
    1) I'm stuck. I cannot reboot from the hard drive or an external drive. The Norton CD has become a permanent default for startup. Under Norton, there is no access to the startup control panel. I cannot override it. Starting up using the option key doesn't work, nor do any other startup keystrokes I've tried. The CD overrides everything.
    I cannot eject the CD. Tried holding down the mouse key and everything else I could think of, but those tricks don't seem to work when the disk is in use--which it always is because it's the startup disk.
    Most annoying: The flat screen G4 has no manual mechanism for ejecting the CD!!! (ie, no little hole to inert a paper clip).
    Any suggestions before I reach for a hammer?

    Have you looked at this?
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1750.html
    Once you get this disk ejected, don't ever ever use any Norton maintenance utility on a Mac! It's an almost universally held opinion of users here.
    Regards,
    Steve M.

Maybe you are looking for