Care button and finger print reader for 3000 N200 not working

I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
Kinldly help.

Hi @Sean-Ireland
Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

My finger print reader for dv6-3025dx is not working: can i fix it by redownloading the software?

I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

Reflow in Adobe Reader for Android does not work

The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

Firefox does not recognize my finger print reader for passwords

My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work

I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

Finger Print problem pavilion dv7-4152si not working

I have a HP Pavilion DV7-4152si and the finger print reader will not work. Notebook was sent for repairs a while back as hard drive crashed when was new and has not worked since.

Hi @Sean-Ireland
Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Using T510 for the 1st time and finger print reader

I am preparing for the delivery of my Lenovo T510 and when you use it the first time, what are the procedures, set by step, and at what point and how do you set up the finger point reader please.

Hello mate,
On the task bar you have a laptop icon call Lenovo Think. click there and then click on Lenovo Thinkvantage Tools. In here you have all the Thinkvantage softwares in the computer. Just clic on Fingerprint Reader to open it.
The fingerprint reader can be use to power on the computer you need to specify a windows password to use it.
you can put a BIOS password and you use fingerprint instead.
Make the restore disks as soon as possible. To create them follow the steps above and click on Factory Recovery Disks instead.
Changing the boot order is just a setting in the BIOS you can do that at any time.
No you don't have to install Norton or Office 2010. If it's already installed you can uninstall them from the control panel>programs and features.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Finger print sign in option does not work

I am trying to set up a sign in on my profile to use my finger prints. When I try to scan my fingerprints, I get the message,
'Fingerprint sign on is disable. Contact system administrator.' I am the system administrator according to my account. How do I fix this?

Is it a Desktop or a Laptop?Which model are you using?
Ensure your finger is at the same angle as it was during enrollment. Even moderate changes in finger angle during swipe can cause the error.
Delete and recreate fingerprints.
Enter the BIOS and Clear Fingerprints data from BIOS.
Uninstall and reinstall software
S.Sengupta, Windows Entertainment and Connected Home MVP

I am trying to download and install adobe reader, but it is not working. Everytime I try, I get the download but when I try to install it, it goes somewhere but not on my screen for me to install. If I try to install again, it says only one copy can be in

I am trying to download Adobe Reader, I have Windows 7 on my PC. Every time I get the download, I click on it to install the program, and I get the usual messages but I never get the install message. When I try the download again, I get a message telling me only one copy of the program can go on the computer. When I check the program list, it is not there. I have to restore my computer before I can attempt the download and install again. I have tried this at least 6 times but cannot install Adobe Reader. Please help me out with this. I really like this product and prefer to use it. I had o originally delete the program, due to an update conflict.
Linda Eaton

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Portege R700 Finger Print Reader suddenly not recognised from OS

Hello,
I have been searching for a solution
My R700 on Win7 was working flawlessly using the finger print scanner. At some point without any reason the
hardware (finger print reader to login) was not recognized by the OS anymore.
- I tried to remove the driver software, reinstalled it
- updated it and so on resulting that the hardware was not found.
- I even removed all relevant entries from the registry - no go.
- the Authentic Finger Print software starts up, but only giving an error that the FP-reader is not present.
Is there a way to remove the stored fingerprint manually by deleting the manually.
The hardware is working according to the support. (Machine was send in)
However I do not wish to re-setup the entire machine (it is a business notebook) just to get this to work?
Any hints or step by step intro to achieve this?
I could not find a descritpion on how to remove fingerprints (cause I suspect that is the problem) manually since the software to do this does not start up.
Any input would be appreciated.
Best regards
julian

If you don't see the fingerprint hardware or unresolved devices in Device Manager then the device is either disabled in the BIOS or the fingerprint sensor is faulty or loose, or there was a liquid spill causing corrosion.

Finger print reader and windows 8.1

Have an HP DM4T1100 notebook, Can't get finger printe reader to work with Windows 8.1. Worked with 8.0 64bit, but when upgraded to 8.1 64 bit lost the use of the Finger Print Reader. Have loaded many different drivers and software but nothing works and the finger print reader no longer "blink". Sometimes get infor saying swipe finger but the Reader is not flashing.
Need to know steps to clear all the fingerprint drivers and software to start over, hopfully with know dirivers and software that works with Windows 8.1 64 bit.

Hello,
After checking the HP Driver and Download page, for your exact notebook. Their are no available drivers for Windows 8 or 8.1. For a possible work around, you can try the 8.1 drivers for another notebook. At this point, I would suggest creating a restore point on your computer if you have not already. I have included the document 'Using Microsoft System Restore (Windows 8)'. Please click on the option for Create a restore point, and follow the instructions.
Once the restore point has been created. You will need to uninstall the previous drivers that you have installed for the finger print reader. I have included the steps below for uninstalling through Add and Remove Programs.
* From the Start screen type Add and Remove Programs
* Select Add and Remove Programs
* Once the list is populated look for anything like Validity driver, SimplePass, Finger Print Reader, or Biometric
* Right click on these options and select uninstall
After all the items have been uninstalled, please restart your computer. After the computer is fully back, please empty the trash.
The next step will be to install the Validty driver, and then the Fingerprint Reader software. I have included the links below for you.
'Validity Fingerprint Sensor Driver'
'AuthenTec Fingerprint Sensor Driver'
Please let me know if you are able to use the Fingerprint reader after this, thank you.
I worked on behalf of HP

My finger print reader is not working and this unknown driver is not installing HP4230s

my finger print reader is not working and i have tried the downloads available on hp website and many other but its not showing in the area where we configure the passwords for the pc
and my other problem is as i have updated my pc to win 8 or 8.1 this device is not getting installed the hardware id is : ACPI\VEN_HPQ&DEV_0004
kindly solve these problems as i really want to use this finger print and i dont know what is this unknown device all about

my hp envy mp notebook fingerprint is not working, give the software for it !

Vista Drivers for Finger Print Reader on a Portege R200????

Please help
I have a R200 model, which originally came with Windows XP, now have Windows Vista Business Edition Installed & having problems getting the Finger Print Reader to work. I have tried plenty of programs which Windows says have installed properly, but they all state that the reader is not conected??
I have tried so many times to get it to work, and looked at the manufactures web-site for Drivers or Software, but nothing.
Seems very strange for a Toshiba Laptop not to work fully, even when it states on the OS sticker Windows Vista Capable ???
Ummmmmm

Hi there,
where did you downloaded the drivers? Maybe on the european webpage? Here are some links with toshiba driver download pages where you could probably find some drivers you need:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Toshiba - Download
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
ToshibaUSA
http://209.167.114.38/support/Download/ln_byModel.asp
Toshiba of Canada Limited - Drivers and Downloads
Greets

Finger print reader asks for password only

My finger print reader doesn't work the way it used to. It only asks for my finger print when logging on to Windows. At all other times it only asks for my windows password which is very annoying. What's wrong -it used to work fine. I reformatted my hdd and downloaded the latest drivers and programs using the system update program. My finger print reader version is 3.3.2.27. I have a T400 with Windows 7 Pro.
Solved!
Go to Solution.

Additional info:
I installed client security solutions 8.3 and now the reader works with my windows apps, but not with my internet pages using firefox. Before I did a reformat, it worked properly with windows logon, windows apps and internet pages.
Why isn't this working properly?

Can the Finger Print Reader be used for the Hard Disk Password at Power-On Boot Time on the W700?

I own a W700 and I have enabled the Hard Disk password at boot time (I have 2 HDDs, so there are two password prompts).
I always type in the passwords, but was wondering if the Finger Print Reader can be used instead?
The Finger Print Reader works fine from Windows 7 logon onwards, but it would also be nice to use it at system boot time, after powering on.
Please let me know if this is possible.
Thanks!
Solved!
Go to Solution.

Sorry I did not get back online quick enough...but the passwords are the same.
For some reason, after my first cold boot, I was still prompted for the hard disk passwords. I powered down again and when I powered back up, it signed me on all the way through. So it was just a hiccup.
All is good now and I'm very happy!
Thanks for pointing me in the right direction.

Any java api for Touch Chip TCKDU02 finger print reader

Hi
I am new to this, and i want to know any java api
that supports Touch Chip finger print reader
a default that came with TouchChip TCKDU02 sdk does not support
java,
help me
regards
B.Rameshwari

that supports Touch Chip finger print reader
a default that came with TouchChip TCKDU02 sdk does
not support
java,
help me sounds like you're not going to be able to interface with it
if it has an interface in another language, you might be able to write a wrapper interface using JNI

Care button and finger print reader for 3000 N200 not working

Similar Messages

Maybe you are looking for