Career change from open VMS system admin

Hello Everyone !!
I was working as a Open VMS system admin for 3 years in a top  IT company .
Now i am  looking for a change and is willing to move in SAP. I am undergoing training in SAP Basis/NW admin . Can u tell me what career path should i take with kind of exp i had and what certifications should i proceed so as to tap with the recent  market demands and also to ensure a progressive career growth in this field.
Your suggestions are invited.
Thanks
Vipul

Hi Vipul,
SAP Basis is always in demand and NW admin knowledge will give you more opportunity. Certification on SAP Basis/NW Basis will be an added advantage for you.
Even after 3 years of experience in SAP you will be as a fresher and have to work very hard to tap the knowledge.
All the best.
Regards,
Subhasha

Similar Messages

  • Mac App Store Purchase Section All Changed From Open to Install

    Recent update to 10.10.3 Yosemite The MacApp Store purchased section changed from "OPEN" to "INSTALL" as shown in my screenshot below Any suggestions??

    Thanks  DahVeed,  No Go on the Reindex so I did a Safe Boot Mode to empty caches and  any related  file hang ups .  Then I signed in and out of MacApp Store and all is OK  again THANKS...p.s. John at Apple Support via screen share walked me through the process

  • Changing from Periodic inventory system to SAP

    Hi All,
    I have an accounting questions regarding company that switching from Periodic Inventory system to SAP's perpetual inventory system.
    For company that practices Periodic Inventory System, the method to calculate cost of goods sold = opening stock balances + purchases - closing stock balances. All these is reflected in the P&L statement.
    When they switch to SAP, do they need to enter all these figures into SAP for the opening balances?
    As SAP will not have opening balance stock, closing stock and purchases accounts, do they have to create these accounts in P&L just to take in the balances?
    Does anyone have implemented for company that changing from periodic to perpetual inventory system? How do you take in the opening balances? if possible please give example, thanks in advance.
    Regards,
    MH

    Hi All,
    Thanks for the reply. But what is the variance that you guys are talking about? Take example:
    Old system:
    Opening Stock balance = $ 5,000
    +Purchases                  = $20,000
    -Closing Stock balance  = $ 9,000
    Balance                        = $16,000
    The amount that goes into Asset is Closing Balance $9,000 and the amount goes to P&L as COGS is $ 16,000? The rest for $20,000 and $ 5,000 can be ignore?
    Thanks in advance if anyone can answer my question here.
    Regards,
    MH

  • Replicate changes from one SAP System to another

    I have a requirement in which I have done some changes in one SAP System and it is not getting reflected to the other one. Please note that the SAP System which I am refering to is the one we get from SM51 Transaction code. Please note that the SAP System ID and the client is the same.
    Thanks
    Arghadip

    Yes I am able to view all the systems but how can I replicate the changes from 1 to another. We had done the changes in system A but it is not getting reflected in system B. Is there any ways to replicate it.
    No Experts to answer this question?????
    Thanks
    Arghadip

  • I am planning to have career change from JAVA to SAP

    I am having 4+ yrs experience in JAVA.Now i thought of shifting to SAP.
    Is it apt to shift to SAP?If yes which module is recommended in SAP.

    Kalpana,
    You're in luck. SAP has it's own JAVA programming environment. Your programming skills are directly transferable. You just need to take a class on SAP's programming environment and get certified. See the link below to see the courses offered
    https://training3.sap.com/us/en/curriculum/nw_java_dev_na-development-associateprofessional-java-with-sap-netweaver-70-g-en
    There's a more detailed curriculum at the following link, but it's probably overkill
    https://training3.sap.com/us/en/curriculum/java_na-java-programming-courses-g-en
    The links above are for the US, but the classes/information should be the same in India. The only problem is that in India, you have to go through a authorized training center and they're going to want you to pay for all of the training up front. Also, they're probably going to want to run you through the ABAP programming curriculum first, which you don't need if you're happy being a JAVA programmer.
    Hope that helps!
    Best regards,
      --Tom

  • Safari will no longer open.  I was using firefox until I could find a fix for safari.  I made the mistake of changing my default search to firebox later for convenience and now I can't open my system preference or many safari or apple linked files.

    Safari will no longer open. It just goes back to my desktop.  When I right click on the safari icon in my dashboard it says it is open.  I was using firefox until I could find a fix for safari.  I made the mistake of changing my default search to firebox later for convenience and now I can't open my system preference or many safari or apple linked files. Some of my emails from trusted sites won't open and does the same thing. 
    I upgraded my original system from 10.4.11 to I believe 10.6. something about a year or so ago.  I thought about re installing my safari app but when I go to open anything connected to safari my screen goes back to the desktop.  I cant open any files that I have on my desktop that I set up through safari, like my banking program. Prior to changing system preference to safari default I was able to open those files and now I can't get into change it back.  Can you guide me through this?
    Thanks,
    Betty

    Try running the 10.6.8 combo update.
    10.6.8 Combo Updater
    System Preferences or Safari Preferences?
    Do a backup.
    Quit the application.
    Go to Finder and select your user/home folder. Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
    Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.

  • NW2004s BI: System Changes from changes to RSCUSTV23 setting

    Hi
    re: NW2004s BI: System Changes from changes to RSCUSTV23 setting
    We are upgrading our BW system to the new NW2004s BI version 7.0. I was wondering the system changes that were made when we changed the setting in transaction RSCUSTV23 (switched between the new Analysis Authorizations and old Reporting Authorizations).
    Thanks for your help on this.
    Regards.

    > Does this happen to everyone or am I doing something wrong?
    No it doesn't (and shouldn't) happen to everyone, but it is curious. Appearances can change if you log in as another user identity, reset Parameter RAM, the software has changed it's icon etc. (This would explain a recent iTunes icon change but not things like your keyboard preferences changing).
    You might try locking Preferences down before your next update to see if that makes any difference.
    The user account you're installing with has admin permissions I assume?

  • I have to select a file – get Info – and change – open with and change from preview to another program and CHANGE ALL everytime I boot up

    Why do I have to select a file – get Info – select – open with – and change from Preview to another program and click CHANGE ALL with every file extention everytime I boot up.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • I am trying to stop programs from opening automatically when I turn my computer on.  I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

    I am trying to stop programs from opening automatically when I turn my computer on.  I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing.  They continue to open up every time I turn on my Macbook Pro.

    Hi r,
    It sounds like you're running Lion?
    Have you tried running Verify and/or Repair Disk?
    Have you tried running Repair Permissions?
    Do you have at least 15% free space available on your HD?

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • When I click on a link, multiple(and by multiple, I mean a ton) blank tabs open. The only way to stop more blank tabs from opening is to close out of firefox completely. Do I have a virus or do I need to change my settings?

    If I click on something to open in a new tab or click on someone's email to open Outlook, instead of doing that, a bunch of blank tabs open. I'm fine with a couple blank tabs, but they keep opening. The only way to stop the tabs from opening is to close out of firefox entirely. When I try to reopen firefox, blank tabs again begin to reopen. You can't close out of them fast enough because they keep opening. To stop opening the blank tabs, you must restart firefox a second time.
    Is this a virus or something wrong with my firefox settings??

    Firefox includes options of how to handle different content types, in your case the mailto links are probably set to "Use Firefox". For details of how to fix this see [[Firefox keeps opening many tabs or windows]], in particular the section "Change the action for a content type".

  • Query a List of Open WMI connections on a server from a remote system

    We are monitoring a specific windows service on a server using Sitescope remote monitoring. The sitescope system uses a WMI method to Check if the service on a specific server is up or not. Initially it works like a charm but over time the WMI connections from
    sitescope time out and we have been told that Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
    I am looking for a way to list open WMI connections to a specific service and/or server from a remote system and a way to kill those connections via a scheduled PowerShell (or batch/perl) script. I was able to list specific classes by -list parameter
    of the Get-WmiObject cmdlet
    but am unable to determine which class will give me the information that I require and the method to kill those connections.

    Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
    1. It's not clear what "not closing the WMI connection it opens gracefully" means. WMI is a management technology that uses DCOM to connect to remote computers. (Is it really a question about DCOM?)
    2. It's not clear what specifically "open connections pile up" means and what problem(s) it causes.
    3. This is really a support question for that software's developer, not a question about WMI.
    -- Bill Stewart [Bill_Stewart]

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • Open Hub - Change from File to Database table

    Hello Experts;
    I want to change the Open Hub Service that we create from File to Database table.
    We are using the Delta Update. However, after I change the Open Hub, Activate the transformation and DTP, when I run it, I don't have any value in the table.
    If I run a new delta into my cube, in the table I only get the data from delta.
    Can anyone knows how to upload all the requests that I have in my cube for the first time I run the delta DTP?
    Thanks and regards;
    Ricardo

    Create a new Full DTP and execute, so that you can dump all of the current contents of the InfoCube into the table and push/pull that table to the target prior to the next delta retraction.
    Edited by: Dennis Scoville on Nov 17, 2009 9:37 AM

Maybe you are looking for