Career planning scenario in the PD module

Hi Experts,
I am doing the Career planning scenario in the PD module.
While we create a career plan, growth of the employee in org unit, can the no. of years of experience in the organization be included?
If ,for ex., the career plan path is built with the various positions hierarchy in the org unit starting with the lowest level, then is there any way to depict that the employee should have an exp of 3 years or so to aquire a higher position in the path ?
Please guide me.
Thanks & Regards,
Vijetha

Try this out
after career development is made
go in change mode
and in path if u double click the job / position u created it will pop-up the Maintian duration
u can give years / months as u wish
with regards
partha
keep learning and sharing

Similar Messages

Career planning and succession planning

Hi All,
we are implementing CP & SP.
our client is not having a big HR team how ever we are trying to bring them CP & SP into the system with sub profiles Qualifications & Designations
please sharing your experiences and consequences on the above going with CP & SP.
Thanks

Hi Rashmi,
Career planning is done for all positions whereas succession planning is done only for the critical positions within the organization (e.g. CEO).
Development plan consists of the planned trainings, qualifications to be developed by a personnel within a certain period of time.
SAP Help Definitions:
Career Plan : A career planning scenario takes an employeeu2019s personality, skills and abilities and determines the positions this employee should occupy in the course of his or her future career, and the training measures required to obtain the additional qualifications needed for this. A career planning scenario anticipates how an employeeu2019s career will develop.
Succession Plan: Succession planning sets out to ensure that there is a continuous supply of qualified personnel.
Development Measure: A development plan is a grouping together of personnel development measures. The objective of a development plan is to provide specific qualifications.
Regards,
Dilek

What is the basci knowledge for learning the APO module

hai
im a BW-consultant. im planning to learn the APO-module . So what i the prequistie to learn the APO module.
pls let me know
kumar

as a BW consultant DP is a good place to start since the Admin workbench (or BW workbench as it is called now) will be an area you will be confident with
in additon, you will need to get some extra business process knowledge on Sales and Operations Planning, Forecasting Algoritms, Planning area and Planning Book design concepts,various tools and transactions for Data processing in planning area, Using Macros etc to just name a few.
Look for the SAP education website for topics if you eventually plan to get certified.
the help.sap.com list of topics for DP is a good place to start.
the wiki that siva has already linked is a good resource. Also searching for posts here if you have doubts will help and also feel free to ask questions.

I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a

I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a member so why won't it let me go into Develop Module? or any of the other modules?

The Photoshop LR CC is active but you have not yet activated it. The activation server shows it. Please log out & log back in of the CC desktop CC.
The Complete CC purchased last year is active till 11th of July. In case after logging out & logging back in does not resolve the issue, please contact Customer support Contact Customer Care
Regards
Rajshree

Need the name of the funcion module for master data planning

Hi all,
i need to know the name of the function module to call in a planning function in order to do a master data planning.
thanks a lot!

Hello Giancarlo,
You cannot do master data planning in BPS. Master data has to be maintained separately in the BW system.
Cheers
Aneesh

Hi sir / madam i have done my b.tech in mechanical and automation. now i am planning to join sap mm module. tell me it will help me to groom my future. what are the job opportunites as in fresher after doing this course. from where should i do it

i have done my b.tech in mechanical and automation. now i am planning to join sap mm module. tell me it will help me to groom my future???
what are the job opportunites as in fresher after doing this course. which is the best insititute for this course??

Hi Nishant,
Welcome to SCN.
Questions like these have been asked many times in these forums. I suggest you search for relevant information and if you are not satisfied, then post a specific question.
Also, spend some time reading the The SCN Rules of Engagement
pk

Just purchased 1 year prepaid Creative Cloud Photography Plan and Lightroom saying " Develop Module is Disabled " What do I need to do to activate the full program?

Hello, I just purchased 1 year prepaid Creative Cloud Photography Plan and Lightroom saying " Develop Module is Disabled " What do I need to do to activate the full program?

Are you signed into the creative cloud application manager?
Did you install Lightroom from the creative cloud application manager?

File To File Scenario - Receiver Channel Adapter Module

Hello,
We have PI 7.4 in our landscape.
There is one File To File scenario which needs to be implemented.
In this scenario, at source diretory we have multiple files (country wise) which needs to be read and put into mutiple folders (country wise) at the target directory.
Please note we are not making any objects in ESR and directly configurations need to be done in Integration Directory.
At sender side we can read mutiple files using a single Sender File adapter using the the "Advanced Selection for Source File" option.
At receiver side we are planning to implement a custom Adapter Module which will put the files in their corresponding country wise folders.
We are using NWDS 7.3 EHP 1 SP12 for building the adapter module.
Suggestions are required for below mentioned points:
1. Is the approach follwed is most suitable as we do not want to make mutiple reciever channels for each folder.
2. How to read the file name in the receiver adapter module as Namespace will not be created (we will put a dummy namespace in ID).
3. If any body has already implemented such logic or any suggestions for the same.
All the suggestions are welcome and thanks in advance.
Regards,
Ujjwal Kumar

Hi Ujjwal
Yes, that is the correct namespace as long as you are using the File adapter.
Your code is nearly there, just need the new keyword when creating a new object instance. Below is the sample
// Get Dynamic Configuration
MessagePropertyKey fileNameKey = new MessagePropertyKey("FileName", "http://sap.com/xi/XI/System/File");
String fileName = msg.getMessageProperty(fileNameKey);
// Set Dynamic Configuration
String targetDir = "/blah/blah/blah";
MessagePropertyKey dirKey = new MessagePropertyKey("Directory", "http://sap.com/xi/XI/System/File");
msg.setMessageProperty(dirKey, targetDir );
You can refer to the following SAP JavaDocs for more infomration on the Message class (which you use to get/set the property)
Message
Rgds
Eng Swee

Career Planning

Business Process & DEMO script :
Requirement:
Performance Management (sub function to cover competency mapping system, observations, questionnaires, Documentation.
Succession planning (in house issues, visa, municipality, minister of commerce etc.
Job development / analysis (HAY System, all job descriptions in SAP which is linked to performance Management).
Career planning, Succession Planning, Appraisals.
thks
Sneha
Edited by: Sneha Reddy M on Feb 12, 2009 6:51 AM

Hi,
Prepare the sim files or PPT for Client presentations.
What is the allocated time for each of the sub modules in DEMO.
Warm Regards,
Kapil

Reduction of PIRs in Production lot planning scenario is not happening.

Hello Experts,
I am facing the following problem:
I have a Production lot planning scenario. I have done all customizing and master data maintenace as described in SAP Help for realizing the scenario with transfer posting to plant stock (req class 092).
However my PIRs wich are assigned to the specific production lot are not getting reduced after the transfer posting to plant stock. I need your help to resolve this problem.
Thank you in advance for your input.
Best regards,
Nikolay

Hello Satyajit Kumar,
Thanks for your reply.
The movement type that I use is 411 "Q" and the WBS is the correct one, but PIR still remains unreduced. Please advise.
Best regards,
Nikolay

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

SQL SERVER - Error while executing SSIS package on specific environment : Connection manager - The specified module could not be found

I have deployed my SSIS packages on SQL 2008 server.
I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
Scenario 1:
I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
Scenario 2:
I have used the IBM Tivoli work scheduler(TWS) to invoke the bat file which in tern will invoke the ssis packges;
but when i do this i am getting the below error
Code: 0x8007007E
Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
Description: The specified module could not be found.
Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
Please help me to resolve this issue.
Regards,
Prakash

Check you TWS jobmanrc.cmd configuration file. You may need to add a PATH environment variable in that file that includes your SQL Server file locations. When TWS jobs are executed, they may not be executing with the same
PATH variable as when you execute the SSIS outside of TWS.

A FUNCTION MODULE FOR THE HR MODULE FOR PAYROLL OF EMPLOYEES

hi,
i want some a function module or code where i need to get the payroll details like the basic pay ,hra,special allowance,medical allowance,other allowance of an employee on the monthly basis.
the data that i have on ot os not on the basis of months it contains datd of more than one month.like the baisc pay of an employee is given on a radom day basis of more than one month.
but i need to bifercatethe data on monthly basis.
waiting for the reply.
thanks and regards

Hi,
Use the fun module
RP_FILL_WAGE_TYPE_TABLE_EXT
which willget PA0008 results.
but to get the real payroll results you have to import data from clusters by writing the program. Data will be fetch from RT and CRT internal tables based on the Wage Types
see the sample code:
report zporgr0100
       line-size 252
       line-count 60(1)
       no standard page heading
       message-id zndc.
Database Tables & Infotypes
tables: pcl1,        " HR Cluster1
        pcl2,        " HR Cluster1
        pa0003,      " Master data - Payroll Status
        cskt,        " Cost Center Texts
        t528t,       " Positions Texts
        t513s,       " Job Titles
        pernr,       " Logical PNP
        t001p,       " Personnel Subarea
        t500p,       " Personnel Area
        t501,        " Employee Group
        t503k,       " Employee Subgroup
        csks.        " Cost Center
infotypes:0000,0001.
*include rpclst00.
include rpc2rx00.
include rpc2rxx0.
include rpc2cd00.
*include rpc2ps00.
*include rpc2pt00.
*include rpcfvp00.
*include rpcfdc10.
*include rpcfdc00.
include rpppxd00.
include rpppxd10.
Declaration of Internal Tables
Internal Table for Output Data
data: begin of rep_tab occurs 0,
        kostl like pa0001-kostl,      " Cost Center
        pernr like pa0001-pernr,      " Personal Number
        ename like pa0001-ename,      " Employee Name
        ctext like cskt-ltext,        " Cost Center Text
        ptext like t528t-plstx,       " Position Text
        ot1   type p decimals 2,      " Jan OT Amount
        ot2   type p decimals 2,      " Feb OT Amount
        ot3   type p decimals 2,      " Mar OT Amount
        ot4   type p decimals 2,      " Apr OT Amount
        ot5   type p decimals 2,      " May OT Amount
        ot6   type p decimals 2,      " Jun OT Amount
        ot7   type p decimals 2,      " Jul OT Amount
        ot8   type p decimals 2,      " Aug OT Amount
        ot9   type p decimals 2,      " Sep OT Amount
        ot10 type p decimals 2,      " Oct OT Amount
        ot11 type p decimals 2,      " Nov OT Amount
        ot12 type p decimals 2,      " Dec OT Amount
        ott   type p decimals 2,      " Total OT Amount
      end of rep_tab.
Declaration of Variables
data: v_mon(2) type n,                   " Month
      v_no     type i,                   " Data Lines
      v_year(4) type c,                 " Year
      v_date   like sy-datum,            " Date
      v_date1 like sy-datum,            " Date
      v_seqnr like pc261-seqnr.        " Sequence No.
Declaration of Constants
data: c_type   like hrp1001-otype value 'S', " Object Type
      c_kokrs like cskt-kokrs value '1000',   " Controlling Area
      c_date1 like sy-datum value '18000101', " Date
      c_date2 like sy-datum value '99991231', " Date
      c_x       type c value 'X',              " Sign
     c_mon(2) type c value '01',             " Month
      c_val1(2) type c value '31',             " Date
      c_val2(2) type c value '12',             " Month Type
      c_val    like p0041-dar01 value '01',    " Date Type
      c_lgart1 like p0008-lga01 value '0722', " Wage Type
      c_lgart2 like p0008-lga01 value '0723', " Wage Type
      c_1(2)   type n value '01',                           " Month1
      c_2(2)   type n value '02',                           " Month2
      c_3(2)   type n value '03',                           " Month3
      c_4(2)   type n value '04',                           " Month4
      c_5(2)   type n value '05',                           " Month5
      c_6(2)   type n value '06',                           " Month6
      c_7(2)   type n value '07',                           " Month7
      c_8(2)   type n value '08',                           " Month8
      c_9(2)   type n value '09',                           " Month9
      c_10(2) type n value '10',                           " Month10
      c_11(2) type n value '11',                           " Month11
      c_12(2) type n value '12'.                           " Month12
Selection-screen
parameters:
p_year like pc2b0-pabrj obligatory.       " Payroll Year
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Selection of Period
perform get_period.
Get PERNR from LDB
get pernr.
Get the Master data from infotype 0001
perform get_master_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(252) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*&      Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Cost Center
clear csks.
if not pnpkostl[] is initial.
    select single kostl
      into csks-kostl
      from csks
      where kostl in pnpkostl.
    if sy-subrc <> 0.
      message e999 with 'Invalid Cost Center'(003).
    endif.
endif.
Validation of Personnel Number
clear pa0003.
if not pnppernr[] is initial.
    select pernr
    from pa0003 up to 1 rows
      into pa0003-pernr
      where pernr in pnppernr.
    endselect.
    if sy-subrc <> 0.
      message e999 with 'Incorrect Personal Number Entered'(002).
    endif.
endif.
Validation of Personnel Area
clear t500p.
if not pnpwerks[] is initial.
    select persa
    from t500p up to 1 rows
      into t500p-persa
      where persa in pnpwerks.
    endselect.
    if sy-subrc <> 0.
      message e999 with 'Incorrect Personnel Area Entered'(001).
    endif.
endif.
Validation of Personnel Sub Area
clear t001p.
if not pnpbtrtl[] is initial.
    select btrtl
    from t001p up to 1 rows
      into t001p-btrtl
      where btrtl in pnpbtrtl.
    endselect.
    if sy-subrc <> 0.
      message e999 with 'Incorrect Personnel Sub Area Entered'(037).
    endif.
endif.
Validation of Employee Group
clear t501.
if not pnppersg[] is initial.
    select persg
    from t501 up to 1 rows
      into t501-persg
      where persg in pnppersg.
    endselect.
    if sy-subrc <> 0.
      message e999 with 'Incorrect Employee Group Entered'(038).
    endif.
endif.
Validation of Employee Sub Group
clear t503k.
if not pnppersk[] is initial.
    select persk
    from t503k up to 1 rows
      into t503k-persk
      where persk in pnppersk.
    endselect.
    if sy-subrc <> 0.
      message e999 with 'Incorrect Employee Sub Group Entered'(039).
    endif.
endif.
endform.                  "validate_screen
*&      Form get_period
Get the Correct Period based on Selection screen selection
form get_period.
clear: v_year,v_mon, v_date, v_date1.
v_year = sy-datum+0(4).
v_mon = sy-datum+4(2).
if pnptimr1 = c_x.      " Current Date
    pnpbegda = sy-datum.
    pnpendda = sy-datum.
elseif pnptimr2 = c_x. " Current Month
    concatenate v_year v_mon c_val into v_date.
    concatenate v_year v_mon c_val1 into v_date1.
    pnpbegda = v_date.
    pnpendda = v_date1.
elseif pnptimr3 = c_x. " Current Year
    concatenate v_year c_val c_val into v_date.
    concatenate v_year c_val2 c_val1 into v_date1.
    pnpbegda = v_date.
    pnpendda = v_date1.
elseif pnptimr4 = c_x. " Upto Today
    pnpbegda = c_date1.
    pnpendda = sy-datum.
elseif pnptimr5 = c_x. " From Today
    pnpbegda = sy-datum.
    pnpendda = c_date2.
else.
    if ( pnpbegda is initial and pnpendda is initial ).
      pnpbegda = c_date1.
      pnpendda = c_date2.
    elseif pnpbegda is initial and not pnpendda is initial.
      pnpbegda = c_date1.
      pnpendda = pnpendda.
    elseif not ( pnpbegda is initial and pnpendda is initial ).
      pnpbegda = pnpbegda.
      pnpendda = pnpendda.
    endif.
endif.
endform.              "get_period
*&      Form get_master_data
Get the Master Data from Database Tables PA0001,0002,0003
form get_master_data.
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
if p0001-kostl in pnpkostl.
    rep_tab-kostl = p0001-kostl.
    rep_tab-pernr = p0001-pernr.
    rep_tab-ename = p0001-ename.
Get the Position Text
    clear t528t-plstx.
    select single plstx into t528t-plstx from t528t
            where plans = p0001-plans and
                  otype = c_type and
                  sprsl = sy-langu.
    if sy-subrc = 0.
      rep_tab-ptext = t528t-plstx.
    endif.
Get the Cost Center Text
    clear cskt-ltext.
    select single ltext into cskt-ltext from cskt
            where spras = sy-langu and
                  kokrs = c_kokrs and
                  kostl = p0001-kostl.
    if sy-subrc = 0.
      rep_tab-ctext = cskt-ltext.
    endif.
Get the Overtime Payment Data
    perform get_ot_data.
    rep_tab-ott = rep_tab-ot1 + rep_tab-ot2 + rep_tab-ot3 +
                  rep_tab-ot4 + rep_tab-ot5 + rep_tab-ot6 +
                  rep_tab-ot7 + rep_tab-ot8 + rep_tab-ot9 +
                  rep_tab-ot10 + rep_tab-ot11 + rep_tab-ot12.
    append rep_tab.
    clear rep_tab.
endif.
sort rep_tab by kostl pernr.
delete rep_tab where kostl = ' '.
delete rep_tab where ott = 0.
endform.                 "get_master_data
*&      Form get_ot_data
Get the Overtime Payment Data
form get_ot_data.
cd-key = pernr-pernr.
rp-imp-c2-cd.
sort rgdir by seqnr.
To get sequence number for the payroll period
loop at rgdir where void     is initial
                    and reversal is initial
                    and outofseq is initial
                    and srtza    eq 'A'.
    if rgdir-fpper+0(4) = p_year.
To consider offcycle run data
      if not rgdir-ocrsn is initial.
        v_seqnr = rgdir-seqnr.
        exit.
      endif.
      v_seqnr = rgdir-seqnr.
    endif.
    if not v_seqnr is initial.
      perform import_rx.
    endif.
    perform process_wagetypes.
endloop.
endform.                 "get_ot_data
include rpppxm00.
*&      Form Import_rx
Import the RX data from Clusters
form import_rx.
rx-key-pernr = cd-key-pernr.
rx-key-seqno = v_seqnr.
rp-init-buffer.
rp-imp-c2-rx.
endform.                    " Import_rx
*&      Form Process_wagetypes
Calculate the Overtime Amount based on Wage types
form process_wagetypes.
loop at rt.
    if rt-lgart = c_lgart1 or rt-lgart = c_lgart2.
      if rgdir-fpper+0(4) = p_year.
        v_mon = rgdir-fpper+4(2).
        case v_mon .
          when c_1.
            rep_tab-ot1 = rep_tab-ot1 + rt-betrg.
          when c_2.
            rep_tab-ot2 = rep_tab-ot2 + rt-betrg.
          when c_3.
            rep_tab-ot3 = rep_tab-ot3 + rt-betrg.
          when c_4.
            rep_tab-ot4 = rep_tab-ot4 + rt-betrg.
          when c_5.
            rep_tab-ot5 = rep_tab-ot5 + rt-betrg.
          when c_6.
            rep_tab-ot6 = rep_tab-ot6 + rt-betrg.
          when c_7.
            rep_tab-ot7 = rep_tab-ot7 + rt-betrg.
          when c_8.
            rep_tab-ot8 = rep_tab-ot8 + rt-betrg.
          when c_9.
            rep_tab-ot9 = rep_tab-ot9 + rt-betrg.
          when c_10.
            rep_tab-ot10 = rep_tab-ot10 + rt-betrg.
          when c_11.
            rep_tab-ot11 = rep_tab-ot11 + rt-betrg.
          when c_12.
            rep_tab-ot12 = rep_tab-ot12 + rt-betrg.
        endcase.
      endif.
    endif.
endloop.
endform.          "process_wagetypes
*&      Form top_of_page
Write the Report and Column Headings
form top_of_page.
format color col_heading on.
write: /1(252) 'NATIONAL DRILLING COMPANY'(010) centered,
         /1(252) 'Overtime Payments Details'(011) centered.
format color off.
if pnptimr1 = c_x.      " Current Date
    write: /2 'Period From     :'(036), sy-datum, 'To:'(006), sy-datum.
elseif pnptimr2 = c_x. " Current Month
    write: /2 'Period From     :'(036), v_date, 'To:'(006), v_date1.
elseif pnptimr3 = c_x. " Current Year
    write: /2 'Period From     :'(036), v_date, 'To:'(006), v_date1.
elseif pnptimr4 = c_x. " Upto Today
    write: /2 'Period From     :'(036), c_date1, 'To:'(006), sy-datum.
elseif pnptimr5 = c_x. " From Today
    write: /2 'Period From     :'(036), sy-datum, 'To:'(006), c_date2.
else.
    if ( pnpbegda is initial and pnpendda is initial ).
      write: /2 'Period From     :'(036), c_date1, 'To:'(006), c_date2.
    elseif pnpbegda is initial and not pnpendda is initial.
      write: /2 'Period From     :'(036), c_date1, 'To:'(006), pnpendda.
    elseif not ( pnpbegda is initial and pnpendda is initial ).
      write: /2 'Period From     :'(036), pnpbegda,
               'To:'(006), pnpendda.
    endif.
endif.
write: 219 'Report Run Date:'(018), sy-datum.
if not pnpkostl[] is initial.
    if pnpkostl-high is initial.
      write: /2 'Cost Center     :'(004), pnpkostl-low,
            219 'Time           :'(020), sy-uzeit.
    else.
      write: /2 'Cost Center From:'(005), pnpkostl-low+7(3),
                                'To:'(006), pnpkostl-high,
            219 'Time           :'(020), sy-uzeit.
    endif.
else.
    write: /219 'Time           :'(020), sy-uzeit.
endif.
if not pnppernr[] is initial.
    if pnppernr-high is initial.
      write: /2 'Personal Number :'(007), pnppernr-low,
             219 'User           :'(021), sy-uname.
    else.
      write: /2 'Personal No.From:'(008), pnppernr-low,
                                'To:'(006), pnppernr-high,
             219 'User           :'(021), sy-uname.
    endif.
else.
    write: /219 'User           :'(021), sy-uname.
endif.
write: /219 'Page No        :'(022), sy-pagno.
format color col_heading.
write /1(252) sy-uline.
write:/1 sy-vline, 10 sy-vline,
        41 sy-vline,
        67 sy-vline, 68(167) 'Overtime Payments(Dirhams)'(013) centered,
       235 sy-vline,252 sy-vline.
format color col_heading.
write:/1 sy-vline, 2(8) 'Emp #'(019) centered,
        10 sy-vline, 11(30) 'Employee Name'(012) centered,
        41 sy-vline, 42(25) 'Position'(014) centered,
        67 sy-vline, 68(167) sy-uline,
       235 sy-vline,236(16) 'Total'(017) centered,
       252 sy-vline.
write:/1 sy-vline, 10 sy-vline,
        41 sy-vline,
        67 sy-vline, 68(13) 'JANUARY'(024) centered,
        81 sy-vline, 82(13) 'FEBRUARY'(025) centered,
        95 sy-vline, 96(13) 'MARCH'(026) centered,
       109 sy-vline,110(13) 'APRIL'(027) centered,
       123 sy-vline,124(13) 'MAY'(028) centered,
       137 sy-vline,138(13) 'JUNE'(029) centered,
       151 sy-vline,152(13) 'JULY'(030) centered,
       165 sy-vline,166(13) 'AUGUST'(031) centered,
       179 sy-vline,180(13) 'SEPTEMBER'(032) centered,
       193 sy-vline,194(13) 'OCTOBER'(033) centered,
       207 sy-vline,208(13) 'NOVEMBER'(034) centered,
       221 sy-vline,222(13) 'DECEMBER'(035) centered,
       235 sy-vline,252 sy-vline.
format color off.
write /1(252) sy-uline.
endform.            "top_of_page
*&      Form Display_report
Write the Report Output
form display_report.
clear v_no.
describe table rep_tab lines v_no.
if v_no = 0.
    message i999 with
     'No Data found for the entered Selection'(015).
endif.
loop at rep_tab.
    format color 3.
    at new kostl.
      read table rep_tab index sy-tabix.
      write:/1 sy-vline, 2(12) 'Cost Center:'(009),
             14(10) rep_tab-kostl,
             25(30) rep_tab-ctext,
            252 sy-vline.
      format color off.
      write /1(252) sy-uline.
    endat.
    format color col_normal.
    write: /1 sy-vline, 2(8)   rep_tab-pernr,
          10 sy-vline, 11(30) rep_tab-ename,
          41 sy-vline, 42(25) rep_tab-ptext,
          67 sy-vline, 68(13) rep_tab-ot1 no-zero,
          81 sy-vline, 82(13) rep_tab-ot2 no-zero,
          95 sy-vline, 96(13) rep_tab-ot3 no-zero,
         109 sy-vline,110(13) rep_tab-ot4 no-zero,
         123 sy-vline,124(13) rep_tab-ot5 no-zero,
         137 sy-vline,138(13) rep_tab-ot6 no-zero,
         151 sy-vline,152(13) rep_tab-ot7 no-zero,
         165 sy-vline,166(13) rep_tab-ot8 no-zero,
         179 sy-vline,180(13) rep_tab-ot9 no-zero,
         193 sy-vline,194(13) rep_tab-ot10 no-zero,
         207 sy-vline,208(13) rep_tab-ot11 no-zero,
         221 sy-vline,222(13) rep_tab-ot12 no-zero,
         235 sy-vline,236(16) rep_tab-ott no-zero,
         252 sy-vline.
    at end of kostl.
      write /1(252) sy-uline.
    endat.
    format color off.
    at last.
      sum.
      format color 1.
      write: /1 sy-vline,
            10 sy-vline, 11(30) 'Total'(017) centered,
            41 sy-vline,
            67 sy-vline, 68(13) rep_tab-ot1 no-zero,
            81 sy-vline, 82(13) rep_tab-ot2 no-zero,
            95 sy-vline, 96(13) rep_tab-ot3 no-zero,
           109 sy-vline,110(13) rep_tab-ot4 no-zero,
           123 sy-vline,124(13) rep_tab-ot5 no-zero,
           137 sy-vline,138(13) rep_tab-ot6 no-zero,
           151 sy-vline,152(13) rep_tab-ot7 no-zero,
           165 sy-vline,166(13) rep_tab-ot8 no-zero,
           179 sy-vline,180(13) rep_tab-ot9 no-zero,
           193 sy-vline,194(13) rep_tab-ot10 no-zero,
           207 sy-vline,208(13) rep_tab-ot11 no-zero,
           221 sy-vline,222(13) rep_tab-ot12 no-zero,
           235 sy-vline,236(16) rep_tab-ott no-zero,
           252 sy-vline.
      write /1(252) sy-uline.
    endat.
    format color off.
endloop.
endform.          "display_report
reward points if useful
regards,
Anji

Change of planning plant in the production Order

Dear Sapians
Please suggest me how we can change the planning plant in the production order once it is saved and confirmed before taking goods receipt.
Thanks
GVRR

Hi Prasanna,
1. Order is with material
2. This order is created independently
3. yes there are dependent requirements
Scenario is we have created Production orders with X plant. Later after confirmation and before GRN planning plant is changed as per the business decission. Now client wants to receive the goods in new planning plant.
I want to know, How can business area and functional area help us to receive the goods in changed planning plant scenario. can we maintain the plant values in this fields.
Regards
GVRR

Issue in creating Duet Demand Planning Sheet on the basis of Dataview

Hi all,
We are using following landscape
Landscape Details-
 SAPAPO = SCM 700 0002 - SAPKY7002
 Duet 1.5 - 150.700 SP3
 Duet Demand Planning u2013 1000.150.700.3.0 (Server Component), 1000.150.700.3.0 (Client Component)
There are 2 ways available to create Duet Demand Planning Sheet
1. On the basis of existing Demand Planning Scenario
2. On the basis of existing Data views( with SAP macros)
We are able to create Duet planning Sheet with 1 option. But we got erro with second Option that is on the basis od Data view(with macros).
Planning area, Planning Book/Data view and Selection Ids are existing and active.All the Webservices given by SAP are released.
Duet is able to retrive the list of Dataviews avilable for the Planning Area. But it is failing to retrieve the Data View Details the Error is as follow
"No view Details were found Please choose another dataview."
Web Service Call (PlanningViewDetails):
java.rmi.RemoteException:Service call exception; nested exception is:
java.rmi.UnmarshalException: Attribute schemeAgencyID is required in element ID !
Data: TYPEID DUET_JAVA_ADDON
Data: SEVERITYCODE 2
Exception of type 'System.Exception' was thrown.
Is there any SAPNOTE for this ?Any specific configuration requirement from SAPAPO side?
Any webservices to be applied?
Please help in this Issue
Thanks & Regards
Rahul

Hi
There are couple of OSS notes, you might have already seen:
1371328 Internal Error using Planning Book with Aux. KF
1431661 Duet Demand Planning 1.5 SP4.
Regards
Datta

Career planning scenario in the PD module

Similar Messages

Maybe you are looking for