CARK-112 lost passcode
I'm trying to pair with a CARK-112 that I've had (but not used) for a few years. However I'm falling at the first hurdle, since I've lost the manual and can't find a download version. Immediate problem is that I don't know the passcode. I've tried 0000 but it doesn't work.
I understand that the default passcode on this model may not be 0000, but some digits from the serial number on the unit. Is this correct? Is there any way to obtain or reset this, since I have absolutely no idea how to open up my dashboard to find the unit!
If you need details of a proffesional engineer in your area please let me know, i am sure they would do this sort of job for some beer tokens rather then paying a garage who dos'nt know what they are looking for.
Good luck.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.
Similar Messages
-
Carkit 112 problems - help please!
got a new car, a new shape bmw 328 coupe
it already has installed a nokia carkit 112 bluetooth handsfree device
problem being, the previous owner doesn't know the password so i can pair the device with my phone when i get in the car
my phone picks it up fine, but when asked to enter a password it rejects every 'obvious' one like 0000,1111 etc
i then took the dash apart to find the box, as i was told the last 4 digits of the serial number should be the pin, so i found the box
problem being there are quite a few numbers on it, and when i tried entering the last 4 digits from them none seemed to work
can someone confirm exactly what is my serial number on the box, as it contains several strains of information, whether the pin/code will have letters in it as well and what my pin should be?
also, is it possible the previous owner changed the pin and thats why it isn't pairing? or is that not possible on this device? i didn't get any manuals for it so not sure if you can change it yourself?
is there any way of resetting the pin?
otherwise it looks like im stuck with the kit in the car and its of no use to me as i just can't for the life of me get a pin number to work with it
image of the box with information is hosted at the following address:
http://img245.imageshack.us/img245/4839/dsc01395xn9.jpg
your help would be much appreciated
many thanks
marc
Message Edited by the_italian on 05-Apr-2008 09:11 PMhi, i also have carkit 112 and have lost the manual and passcode. I have bought new phone Nokia N81. Reset and tried 0000 and 1234 and no luck. Can't find main junction box only speaker box having removed various panels in my toyota yaris. Garage will charge me £40 to find box and serial no. My new phone finds the carkit but just says unable to pair with this device. I also put in 0135, 1226, 3711 and 1016 which you suggested before. Any other suggestions before I return to garage option.
-
Problem connecting a 6310i to a CARK-112 car kit
Hi,
I'm trying to connect a 6310i to my CARK-112 car kit.
The Nokia phone detects the car kit as "Carkit 112" but when I hit select to pair with it I do not get the option to enter a passcode, instead it displays "device not available"
The car is secondhand and had the car kit previously fitted, I have located the brain and have the appropriate 4 digit passcode.
Anyone done it or can help me?
John.It sounds like the cark-112 has all the connections full, you will need to reset the car kit. Press and hold the buttom for 5 seconds and you should hear a long bleep. Try this with ignition off.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back. -
lost passcode for ipod touch, how do i retieve it
Unfortunatly, you are going to have to restore you ipod, which means that you will lose you data. If you have songs/videos that are not on your computer's iTunes, then you can use a third party program to do that such as 4Media Ipod to PC Transfer, etc.
To restore the lock code follow these directions:
STEP 1. First you have to open iTunes and then sign in. Using the connector cord you have to plug the iPod touch into the computer.
STEP 2. Now you have to allow iTunes to sync with the iPod touch automatically.
STEP 3. Now you have to hold down both Menu and Power butons for ten seconds. Then you will be able to see a symbol of a disc and a cable on the screen of your iPod touch. It shows that it is in restore mode.
STEP 4. Now you have to release both the buttons. Now you will be able to see a “Restore” button. Simply click on it.
STEP 5. Now you have to wait for sometime until restore process is complete.
STEP 6. From your iTunes backup simply copy your files back onto your iPod touch.
STEP 7. From the screen of your iPod touch simply tap on “Settings”. Now select “General” and then click on “Passcode Lock.”.
Now simply type in your new password code. Using this password code again you can lock your iPod touch. In this way you can reset an iPod touch password code. -
How to restore 5c after lost passcode
how to restore 5c after lost passcode?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
For all those old skool bluetooth kit users, Carkit 112 (HFW-5) is compatible with the N95 8Gb.
Voice dialing doesn't work - seems to drop out before completing the dial, but everything else works.
Funny, but that car kit has worked with EVERY bluetooth phone I have tried. Wish I could say the same about the SonyEricsson & Motorola rubbish.
If no-one died or got sued, it's an OK dayluggy69 wrote:
hello please could anyone tell me where the box is in jaguar stype for the carkit112 as i have just bought this car and the carkit112 is already in the car and my nokia95 will find it
Hi luggy69
You are looking for 2nd group of 9 digits and last 4 digits are PIN code on the HFW-1 which will be under the dashboard. If you look at remote button CUW-2 on dash as per screenshot here: http://i56.tinypic.com/28ridyw.jpg it's only going to be a short distance away.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Hi, I would like to know if the Nokia 3230 is compatible with the bluetooth carkit cark 112?
Yes this should work ok.
Danyb
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back. -
Hi all i have just bought a land rover discovery and it has the car kit 112 fitted. it is asking for a pass code but i dont have it. i have been told that the last four digits of the serial number on the brain but i dont know where this is located.
can anyone help please.The last four digits of the serial number is the code number. Try looking in the fuse compartment under steering wheel or under the glove box, there is not many hiding places on a Discovery so it will be in one of these locations.
Dan.
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back. -
I have a apple iPad mini I bought new last year in November. I don't know much of anything else except it has 16GB. There aren't any other problems
besides me forgetting the passcode. I have tried to get help from apple support but seemed to go in circles. It has been off for 2 weeks, they had me
update the iTunes and I tried to do the passcode but now it wants me to update Safari. I don't know where to find it.
I AM getting ready for step 4, but I don't know what that is. There was a back up or manual back up for all my data so I don't lose it, that is where I stopped,
just after step 3 was completed. I am completely lost.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
If nothing above helps:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
LOST PASSCODE IN GUIDED ACCESS
Passcode was lost on an ipad while in guided access. cannot get in to it to do anything. have tried suggestions on the help site but unfortunately the device was not synced to any computer before use. no back up. want to start it from new but can't do anything with it.
Hello Karen,
The only way to get passed this is to put your iPad into recovery mode and then use iTunes to restore it. Check out the article below to walk you through those steps so that way you can use your iPad again.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
http://support.apple.com/en-us/ht1212
Regards,
-Norm G. -
my son lost his passcode for his IPAD. i know i need to do a restore but.... I plugged it into the home computer, found the little tiny IPAD in ITUNES, went to summary clicked on update then restore, now i am getting an error "can't do restore until you go in your IPAD-go to settingS in ICLOUD and disable "FIND MY IPAD" ...HOW DUM IS THIS??? IF I COULD GET INTO SETTINGS ON THE IPAD I SURE WOULDN'T NEED TO DO A RESTORE! AND IDEAS??????
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
I hv lost my passcode .. pls help me to get my all data back
You should not give your e-mail address away in a public forum. I will ask the mods to delete it.
For your issue:
Forgot or Wrong Passcode
http://support.apple.com/kb/HT1212 -
can someone help me wipe my ipod?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Want to restoring to factory settings on iphone 4s but lost passcode
I want to give me old iphone 4s to my son and restore it to factory settings/
i cannot remeber my passcode so i followed instructions on apple assistance which tells me to try doing it through itunes.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
however itunes does not show any of my devices.
can any one give me some advice please.
,many thanks cHello Josieclint,
Thank you for using Apple Support Communities.
The following article will provide the steps to walk you through restoring your iPhone using iTunes:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
Jeff D. -
How to unblock if lost passcode
my son has managed to change his passcode then forget it and now is blocked from getting into his ipod touch!! i have connected to the primary computer but it still asks for a passcode. can it be removed or changed to a set one for us to get into the ipod and set a personal one again?
cheers barryYou will need to Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Maybe you are looking for
-
How do I get MBP back to factory condition then reinstall snow leopard?
I have a new Macbook Pro that came with Leopard installed and the Drop-in Snow Leopard dvd. I upgraded to Snow Leopard as soon as I got it home and then used migration assistant to migrate from a cloned back up of my old macbook which was running Tig
-
Issue in 'SO_NEW_DOCUMENT_SEND_API1' Function Module
Hi All, I have a problem when using the Function Module 'SO_NEW_DOCUMENT_SEND_API1'. I am able to send data to SAP Users Email ID's using this function module, but the issue here is when i am sending the content and receivers lists all are working fi
-
Is it possible to use WEBDAV instead of FTP
We would like to use the PI system also as a kind of FTP Server. For Server to Server communication we will use FTPs. In case users have to place files on the PI system (on dedicated directories) we would like to provide them a possibility to do this
-
I am running CF9 64bit on windows 7. I created the database on mySQL 5.6 server. I created the datasource, theough the CF Admin, for kalendar and it verified. I then tried using the following code to create 2 table, but I recevied an error that just
-
VS15 + IoT: Error when creating project
Hello everyone! I'm facing a problem that I don't know how to fix it when creating a project of type "Windows IoT Core": I followed step by step the program for IoT. Anyone have an idea? Thanks in advance. Mafyou. Cordialement, Mafyou.