CarKit 616 and Audi OEM Microphone

Is it possible to use the Audi OEM microphone, which comes with the Audi hands-free set and is mounted near the rear mirror, as well with the CarKit 616?
I understand, that a proper plug needs to be installed, but aside from this? Maybe this microphone is the same as one of the Nokia's anyways? The Audi part number is 8L1 862 373 A.
At the moment, I don't have any other info about the micro.
Thanks, Thomas

Well, the Audi one's characteristics are exactly matched to the installation position and it is directed towards the driver.
No doubt, that the one supplied by Nokia will work perfectly. I always had CarKit90 in my previous cars (with the Nokia micro) and I was very content.
However, this time I just want to reuse the Audi mic, which is perfectly integrated. At least, I want to find out if it is a option at all, or if some electrical paramters (impedace, ...) stand against it, which make it impossible.
So, if anybody has some experience with this setup (CarKit 616, Audi hands-free telephone microphone in an Audi A4 Avant 2006/07), either positive or negative, pls. let me know
Thanks, Thomas

Similar Messages

3000 n200 0769-BRG upgrade options and poss duff microphone

Hi all nice forum,
I recieved a 3000 n200 0769-BRG (TY2BRUK) for my birthday last week and after getting rid of Vista and installing xp pro am very pleased with it. Quick couple of questions however;
The microphone is extremely quiet in use and you have to shout for sound to work. Is there a driver/bios upgrade that would fix this?
Also I have scoured the Lenovo site for info on the iel10 motherboard because I would like to upgrade the processor in a month or two when I have some more cash but can't find a list of supported processors anywhere. May also be interested in upgrading the nvidia 7300go if that is at all possible too.
As I said overall I am really pleased with the machine - very well put together and great for the cost price.
Any info greatly appreciated
Regards
Rob
System Information
Manufacturer LENOVO Product 0769BRG Serial Number L3E9414
Base Board Manufacturer LENOVO Product IEL10
BIOS Vendor LENOVO Release Date 06/01/2007 BIOS Version String 68ET21WW ROM Size 1.00 MB

Hi
To get the microphone working correctly, go to the control panel and find the Realtek icon (I assume you have installed the Realtek drivers for audio for XP). Go to the mixer tab and on the top row far right is the microphone setting. Make sure it is muted and the slider is at the top. Then click the small button at the bottom of the slider with the two dots [..] and make sure microphone boost is selected.
Has this helped?
Regards
Phil

WSUS updates not applying to Office 2013 Home and Business OEM version

Hi
For some reason I cannot get WSUS updates to automatically install on clients running Office 2013 Home and Business OEM version.
For example
If user opens any of the office 2013 apps e.g. Outlook , word etc, it prompts a message at the top under the ribbon toolbar; UPDATE NOW.
All other updates for OS are downloading and installing just fine from our WSUS server.
What could this be?
I dont have this issue with clients running office 2003

First thing you need to do is be absolutely certain which edition of Office you have installed.
There are five editions of "Office 365" and these days, almost anything that is "OEM" is almost certainly Office 365:
Office 365 Home
Office 365 Personal
Office 365 Small Business
Office 365 Small Business Premium
Office 365 Midsize Business
Office 365 ships with an activation code for an online management account, and authorizes the installation of the software on up to five devices. Office 365 is updated via the WEB .. ONLY.
In addition there are three editions of Office 2013:
Office Home & Student
Office Home & Business
Office Professional
If you have one of these three editions, you should also have a DVD and a Product Activation Code for the SINGLE-PC installation which is licensed for these editions provided by the vendor of your computers. Office 2013 can be updated using WSUS.
Since you're getting a prompt IN THE APPLICATION to "Update Now", I believe you're looking at instances of Office 365, not Office 2013. Office 2013 (desktop) does not provide in-product prompts for updates/upgrades.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

I have a pavilion dv4 and my internal microphone is not working. how do i fix this. thanks

I have a pavilion dv4 and the internal microphone is not working. I believe I had it working for 1 time but can;t figure it out. please help. thanks

Hi,
Please check it using these steps:
1. Right click the iocon speaker (bootom right hand side)
2. Select "Recording Devices"
3. Enable the microphone
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Deinstall And Install OEM again

hi Experts,
Can somebody pls explain me how to deinstall and install OEM. ????
I can not view any options in OEM. it referes a incorret machine name.

DBMS Direct ,
As u mentioned emca didn't work for me.
when I issued the command it gave me the following ...
Oracle@DB1 $ emca -deconfig dbcontrol db -repos drop
Incorrect usage:
oracle.sysman.emcp.EMConfigAssistant [options] [list of parameters]
Options:
-a :configure for an ASM database
-b :configure for automatic backup
-c :configure a cluster database
-e <node> :remove a node from the cluster
-f <file> :specify the file name that contains parameter values
-h :help
-m :configure EM for a central agent
-n <node> :add a new node to the cluster
-r :skip creation of repository schema
-s :silent mode (no user prompts
-x <db> :deletion of a SID or DB
-RMI_PORT <port> :specify the RMI port for DB Control
-JMS_PORT <port> :specify the JMS port for DB Control
-AGENT_PORT <port> :specify the EM agent port
-DBCONSOLE_HTTP_PORT <port> :specify the DB Control HTTP port
The script will prompt for any required data that is not specified in a configuration file. The script always prompts for all required passwords. If you use a configuration file, the file may contain any of the following specifications, as shown, with the specified values correctly filled in:
And there is more to this msg.
So I think manually droping sysman would work.
So issuing only
drop user sysman cascade;
whould be enough ??? or do I have to do anything else ????
And after that how do I recreate it ....???
Is it using ,
emca -deconfig dbcontrol db -repos create.
or using some other way ????

Is it possible to change instance and use OEM ?

We have 4 single DB instance in same oracle 11gr2 server on win2008R2.
We will not use grid control because of lack of time, knowledge and customer approval.
Is it possible to change instance and use OEM by changing ORACLE_UNQNAME variable or in any way ?

840105 wrote:
IF what EdStevens said is true,
WHat environmental variable ,or othe settings shoud I set to start 4 different dbconsole and access those OEM in same server ?
"IF" what I said is true???
The same environment variables you set to start the database itself .....
Here's the environment with no oracle-specific settings:
oracle:$ env | grep ORA | sort
PS1=\n\u:$ORACLE_SID$
Now we set the environment for database 'orcl'
oracle:$ . oraenv
ORACLE_SID = [oracle] ? orcl
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1 is /u01/app/oracle
Now the environment looks like this:
oracle:orcl$ env | grep ORA | sort
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_SID=orcl
PS1=\n\u:$ORACLE_SID$
Start the dbcontrol
oracle:orcl$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vblnxsrv01.vbdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ........................... started.
If Oracle would only provide documentation ... oh, wait!
Getting Started with Database Administration
Managing Oracle Enterprise Manager Database Control

Nokia car kit 616 and N70 phone

The phone and the carkit work together but I have not been able to download my contact onto it like I was able to with my wife's 6280. Any helpful sugestions?

13-Mar-200702:18 PM
krytens4000 wrote:
you need to install the Nokia 616 Contact Download Application onto your phone it is on the 616 support page under software
which application should I use

[SOLVED] HP420 and Built-in microphone don't work.

I have a trouble with my on-board microphone in my laptop (hp-420), it was working some months ago (with previous kernel) and I didn't use it for a while, after several upgrades now I tired to use it and it doesn't work. Second microphone, a jack, doesn't work either, and it's arch related, because I did some tests in windows (have dual boot) and both the built-in and jack work fine. So far I have tried testing alsa configurations, played with preferences and some other things I have read over the internet and in arch forums, but no luck at all. I may think it's kernel related but I'm not sure as I'm not an expert. Also sound works fine, it's only the built in microphone the one I can not get to work. I whish someone could help me or guide me.
So all the info I could gather about my machine and the sound
!!Linux Distribution
Arch Linux
!!DMI Information
Manufacturer: Hewlett-Packard
Product Name: HP 420
Product Version: F.04
!!Kernel Information
Kernel release: 2.6.37-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.23
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd8a00000 irq 47
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:293e (rev 03)
Subsystem: 103c:1526
!!Modprobe options (Sound related)
snd-hda-intel: model=hp
snd-hda-intel: model=hp
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : hp,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: IDT 92HD88B3
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d7666
Subsystem Id: 0x103c1526
Revision Id: 0x100105
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x00
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Front Mic Jack Mode", index=0, device=0
ControlAmp: chs=0, dir=In, idx=0, ofs=0
Control: name="Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x90a60130: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0f 0x0f]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0d 0x0d]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Intel Cantiga HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862802
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6211: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Node 0x03 [Pin Complex] wcaps 0x40739d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw---- 1 root audio 116, 9 Mar 29 10:14 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 8 Mar 29 10:14 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 7 Mar 29 10:14 /dev/snd/hwC0D2
crw-rw---- 1 root audio 116, 6 Mar 29 13:40 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 5 Mar 29 13:40 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 4 Mar 29 10:14 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 3 Mar 29 10:14 /dev/snd/seq
crw-rw---- 1 root audio 116, 2 Mar 29 10:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 29 10:14 .
drwxr-xr-x 3 root root 220 Mar 29 10:14 ..
lrwxrwxrwx 1 root root 12 Mar 29 10:14 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xd8a00000 irq 47'
Mixer name : 'Intel Cantiga HDMI'
Components : 'HDA:111d7666,103c1526,00100105 HDA:80862802,80860101,00100000'
Controls : 18
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [22.50dB] [on]
Front Right: Capture 15 [100%] [22.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on]
Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Front Mic Jack Mode'
value 'Mic In'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mic In'
item.1 'Line In'
control.4 {
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.5 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Volume'
value.0 15
value.1 15
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 2250
dbvalue.1 2250
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 13
value.1 13
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1950
dbvalue.1 1950
control.9 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.10 {
iface MIXER
name 'Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
control.11 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -9999999
dbmax 0
dbvalue.0 0
control.12 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.14 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.15 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.16 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
--endcollapse--
!!All Loaded Modules
Module
nls_cp437
vfat
fat
usb_storage
uas
michael_mic
arc4
ecb
cryptd
aes_x86_64
aes_generic
cpufreq_ondemand
ipv6
usbhid
hid
btusb
bluetooth
uvcvideo
videodev
v4l1_compat
v4l2_compat_ioctl32
snd_hda_codec_hdmi
snd_hda_codec_idt
i915
snd_hda_intel
drm_kms_helper
snd_seq_dummy
drm
joydev
snd_seq_oss
snd_seq_midi_event
snd_seq
snd_seq_device
snd_hda_codec
hp_wmi
i2c_algo_bit
sparse_keymap
snd_hwdep
snd_pcm_oss
i2c_core
acpi_cpufreq
iTCO_wdt
intel_agp
snd_pcm
uhci_hcd
ehci_hcd
snd_mixer_oss
usbcore
r8192se_pci
intel_gtt
sg
freq_table
snd_timer
video
r8169
iTCO_vendor_support
wmi
output
psmouse
battery
container
pcspkr
serio_raw
ac
button
mii
thermal
fan
cfg80211
evdev
processor
snd
soundcore
snd_page_alloc
rfkill
mperf
fuse
ext4
mbcache
jbd2
crc16
sr_mod
sd_mod
cdrom
ahci
libahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x0a 0x02a19020
0x0b 0x0221401f
0x0c 0x40f000f0
0x0d 0x90170110
0x0f 0x40f000f0
0x11 0x90a60130
0x1f 0x40f000f0
0x20 0x40f000f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D2/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
Hardware name: HP 420
Modules linked in: r8192se_pci( ) intel_gtt sg freq_table snd_timer video r8169 iTCO_vendor_support wmi( ) output psmouse battery container pcspkr serio_raw ac button mii thermal( ) fan cfg80211 evdev processor snd soundcore snd_page_alloc rfkill mperf fuse ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom ahci libahci libata scsi_mod
Pid: 788, comm: modprobe Not tainted 2.6.37-ARCH #1
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Last edited by mann138 (2011-04-11 15:57:00)

ewaller wrote:
What is under the switches tab?
Oh -- By the way, that picture is over the size limit defined in the forum rules in tems of pixels, but the file size is okay. I'll let it slide. Watch the bumping as well.
If you want to post the switches tab, upload it to someplace like http://img3.imageshack.us/, copy the thumbnail (which has the link to the original) back here, and you are golden.
I had a bear of a time getting the microphone working on my HP DV4, but it does work. I'll look at the set up when I get home tonight [USA-PDT].
Sorry for the picture and the "bumping"... I have asked in irc in arch and alsa channels and no luck yet... one guy from alsa said I had to wait for the alsa-driver-1.0.24 package (currently I have alsa-driver-1.0.23) but it is weird because the microphone worked some months ago...
So here is what it is under the switches tab

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
Without doing something like that they could easily say it is damage not covered under the normal warranty.
God knows what the repair center did and did not do to it while it was there.
And depending on when you actually bought it the warranty could run out in the mean time.

Office 2013 Home and Business OEM First Run screen

Hi There
We are starting to roll out office 2013 oem Home and Business our users are reporting that the first run screen get coming up every time there open an office application.
In Group Policy I've disable the First Run Movie and Office First run on application boot however the users are still getting to first run screen this is every annoying.
Any help with would be great?
Cheers,
Brett

The policy setting should work: it correctly adds bootedrtm=1 value to HKCU\Software\Policies\Microsoft\office\15.0\firstrun. But for some reason Office apps ignore it. I tried disabling the entire policy, then go through the welcome screen. After finishing
with it, office created the same value, but in another place (HKCU\Software\Microsoft\Office\15.0\FirstRun), and the screen never appeared anymore.
So to make the setting work, you have to manually create registry setting (via GPO preference) with the following data:.
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\FirstRun]
"BootedRTM"=dword:00000001
P.S. this was pretty easy, but did anyone look at disabling the EULA prompt? The acceptance is marked by creating a registry key for each user, but the path contains computer name :)) Therefore if all users of the PC have accepted the agreement, and you
renamed the computer, the popup comes back again. And of course group policy is impossible with such path.

How to (what to) download and install OEM database control

Hello
Can you please tell me the name of the file I should download (Is it still accessible?). I have download many of the oracle product files but don't have the OEM one burned to a CD.
I want to reinstall my database as I have changed my domain name and the OracleConsole(orcl)
I.E.
L:\app\owner\product\11.2.0\db_1\bin\nmesrvc.exe fails to start.
My situation is that I am using a single instance of Oracle 11G R2 for self educational training and development.
I am running on Windows XP SP3.

Hi,
To create or recreate a database control you need to execute the following commands:
Create the DB Control Repository Objects and Configuration Files
$ <ORACLE_HOME>bin/emca -config dbcontrol db -repos create
ReCreate the DB Control Repository Objects and Configuration Files
$ <ORACLE_HOME>bin/emca -config dbcontrol db -repos recreate
Best Regards,
Venkat

Cark 91 and 6210 - No Sound

Hi everyone
recently bought a car from a trader with a Cark 91 fitted so not sure if it's in working order.
borrowed a 6210 which fits the cradle, the phone charges in the cradle but no sound from speaker when either making or receiving a call.
bought a new Cark 91 in box, never used before so should be ok and have replaced all the parts but still no sound from speaker apart from a crackle when the phone is placed into the cradle.
anyone have any ideas please?
intend buying a CA-55 and a CR-56 cradle so I can upgrade to a 6233 but would like to know the system is working as it should before I do this.
Help!!!!!!!!!!

Hi Danny
Have got my 6233 now and the CA-55 and CR-56 came in the post this morning. Have fitted both, the phone works fine and even the cd mutes when it rings!! only prob is when I put the phone in the holder a message comes up saying charging, 2 or 3 seconds later it goes off and another message saying charger not supported comes up, any clues please? according to the nokia website the CR-56 cradle charges the phone!!
Cheers
Graham

Droid 3 Bluetooth and Audi A6 problems

I can pair my Droid 3 with my Audi A6 but can't get my contact list to transfer from the droid to the car. I've tried other things that I've seen posted and that hasn't helped. Any ideas?
P.S. I also had the bluetooth just kick me out while I was in the middle of a conversation with a connected call. That's pretty dangerous when you are driving.

hey delving,
start over by deleting your phone from the mmi and reconnect. watch your phone because it will appear for one second asking to download phonebook and you need to catch that step. you should be fine after that.

Nokia 6234 and Audi A6 car

I have the 6234 and a Audi A6 car and the phone is connected via BT to the car, exporting the phone numbers stored in the mobile and sim so that i can access them from the car display (MMI).
Unfortunately, i do not know for what reason, quite often the BT connection between car and phone get lost and i need to switch the BT off and than on to reconnect. Of course this is quite annoying since it happens too often.
Since i cannot change the car, i'd like to buy a new Nokia but i need it to support the exporting address to the car Multi Media Interface. I have test some Nokia phones (N73 and N70 and also 6230i) but with none of them i can access the addresses stored in the phone/sim from the car MMI. I can phone but i need to access the addresses
So, what is a reliable phone with a good BT that can be used with my car and allow me to use the phone numbers stored in the phone/sim via the Multi Media Interface of the Audi A6?
thanks

Ok, here how it goes, the best source to advise you about this issue is the source that put this car kit together i.e. Audi. This is for the reason that they usually test these systems with different models of phones. They know which components have been included and what BT version is being used. In relation to the phone that you are using at present I advise you to restore the fact settings and check that you have the latest software version available to your phone model and network. To restore fact settings – type *#7780# from the standby mode depending on your model you may have to choose settings only and create a security code or use the default one 12345. For checking software version please follow this link and the instruction therein. http://www.nokia.co.uk/A4777089

CarKit 616 and Audi OEM Microphone

Similar Messages

Maybe you are looking for