Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

Similar Messages

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

How to split left and right sound signal from SI READ Stereo?

How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?

Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

Enlarged photos show white borders on left and right margins

Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

Did you crop your photos?
Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

Justify left and right margins of text

Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIA

Colin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program.

How to group Left and Right audio tracks from a .OMF file?

Hi, i'm editing the sound of my short film, i've sent a .OMF to audition from premiere, but the left and right tracks are seperate tracks in the multitrack session, how would i group them so whatever i do to one channel, will be done to the other

This is because the OMF specification requires mono audio files
It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
You could select all the clips on both tracks and right mouse click and select 'group'
You could send both tracks to a bus
You could export the two tracks to a stereo file and bring that back into the session
Lots more things I'm sure but a little more detail as to what you are trying to do would help

How to separate left and right audio channels?

I've imported some AVCHD footage that had audio recorded separately to each channel, left and right. When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually. When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels. Any advice?
Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding. I used Free MTS M2TS Converter to do the transcoding. While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip. It offers me "6 mono" but not dual mono. Any advice?
My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually.
Thanks!

Thanks Tom. I recorded 2-channel audio, not 5.1 surround. Six mono was only an option on the MP4 clip. I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently. Even when I mute one track, the audio meter still shows equal left and right levels.

How to separate left and right channel in audiotracks

I would like to adjust audio tracks left and right channels separetly from each other. Now the volume levels are linked together. Is there a way to separate them?
Other question is ; for some reason the pan slider in viewer does not seem to have left/right affect but kind of mono/stereo affect. It is supposed to be so, or do I have some audio preference button in wrong position?
Message was edited by: TRST

To answer to myself: Go to the User Manual and read the Chapter Audio Editing Basics from page 425.
Or click the clip in timeline which you want to change, and go to Modify---> uncheck the stereo pair option in there.

How to send left and right of stereo sources to different targets?

Hi
Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?

Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
/j
Message was edited by: juhani h.

Split header at the left and right margins

I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

Hi Jerry: This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin. Seems like quite a silly issue, but I can't figure this one out! Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
Thanks for responding.
Eleni

How to get rid of advertisements that appear on both the left and right of my web browsers

Recently i noticed that when i open either Firefox or Safari, the page will load but a few seconds later, two identical ads appear on both sides of my browser and partially obstructing the webpage that i'm on... PLEASE HELP!
this is what it looks like.... http://i43.tinypic.com/2q8aj9s.jpg

Make sure 'block pop-ups' is selected in both browsers.
Firefox Preferences>Content tab; Safari Preferences>Security tab.
For both browsers download AdBlock:
Firefox - https://addons.mozilla.org/en-US/firefox/search/?q=AdBlock&cat=1%2C0&appver=11.0 &platform=mac
Safari - https://extensions.apple.com

How to move Left and Right audio components

At a performance, there was a delay between what my camera recorded from a soundboard on the left track and what it recorded from a shotgun mic on the right track.
I want to move each track (Right and Left) independent of each other using FCP 10.1.2
So far I have successfully changed the audio from Stereo to Dual Mono and I have Expanded Audio Components.
I am not able to move either track. No matter wether position or arrow is selected I looks like a range selection over the track and it will not move.
Any help would be greatly apreciated!

Yes, that screen shot of your Cam5 video and its right and left audio being staggered is exactly what Im trying to do. Im sorry I have not been able to describe this better.
It was the “Detach Audio” option that was giving the messy appearance.
This time I only made two adjustments done in the Timeline.
I followed these two steps:
1. I select the clip on the Timeline and chose “Expand audio components”
2. Then selected the video clip again and chose “Dual Mono”
Here is a screen shot of what it looks like now:
Just like before, I can manipulate the audio levels but when I attempt to drag either audio a box is drawn over the clip that looks like the “range select” tool. This happens when I have either arrow or position is selected. Nothing can be moved. I tried these two basic steps on my other computer using an older version of FCPX and get the same result.
The work around that I described above allowed me to finish this project by my deadline but this is still something I would like to learn since it’s a pretty basic function of FCP that I need to be able to do a lot.
Thank you Tom for your continued help and guidance.

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Similar Messages

Maybe you are looking for