Carousel View Better Than Cover Flow For The Finder?

I have been using my .Mac Web Gallery quite a bit lately and I love the new and improved Carousel view. Apple keeps updating it (they added reflections, a nice play/pause scroll bar, and now you can use the scroll wheel (or ball) on your mouse just like Cover Flow in iTunes and the Finder) making it better and better and it has gotten to the point where I think it would make a lot more sense (and look nicer) for Apple to implement it in the Finder in place of Cover Flow. Cover Flow works perfectly for iTunes still (as that's what it was intended for) and I think that it's "Ok" in the Finder in Leopard, but now that Apple has cleaned up the Carousel view so much in the .Mac Web Gallery, I can see it looking PERFECT in the Finder in Leopard. For anyone who's used or seen the Cover Flow view in the Finder, you'll realize what I mean when I say that it's "Ok". The problem with it is that most of the dynamically generated icons in Leopard are not nice squares like the albums in iTunes so the icons off to the sides of the center one look skewed and distorted. The Carousel view would fix that problem while retaining the benefits of the Cover Flow view and, from what I can see, would actually enhance the benefits because the side icons would be easier to see as they are not skewed. All I'm suggesting is for Apple to swap out the Cover Flow view in the Finder for the Carousel view and then the Finder would really SHINE! So, my question to any of you is, "Would you vote for the Carousel view to replace the Cover Flow view in the Finder?" Please let me know any of your ideas or suggestions. Thanks.

I made a newer post about this same topic (trying to be a little more strategic) and this time I included a link to a video demonstrating my point. Here's the post http://discussions.apple.com/message.jspa?messageID=6574743#6574743.
I couldn't agree with you more on the custom folder icon issues. I'm beginning to find out what the problem is on that. I have used the newest version of Candy Bar for my Home directory icons and that works fine, but there are some folders that I want to use a different icon for and leave the rest as they are. Candy Bar can't do this for me (as it only works with the generic icons) and so I used Apple's Icon Composer application (in the Developer Tools) to make the correct icon sizes for Leopard and then saved them as .icns but then copying and pasting that on a folder would result in the default ICNS icon and not my custom icon (that was under 10.5.1). So I finally got the custom icon to appear, but it only works for sizes 128x128 and lower, even though I put a 512X512 version in there. That's why it doesn't show up in Cover Flow. For some reason, Leopard "blacks" out anything larger than 128x128 on "Cut and Paste" icons. I found that out by copying my custom icon from the Get Info panel and then opening that in Preview and it shows a black background for the larger icons instead of the alpha channel. I'm still trying to figure this out. Also, IconBuilder seems to be doing the same thing (making and ICNS file) but it seems to work better. I haven't used that since I've upgraded to Leopard but from what I've read it should work, but I don't have Photoshop right now. Well, thanks for posting and agreeing with me on the Carousel view and I hope you check out my video. Thanks.

Similar Messages

  • Cover flow for the ipad

    Why is no Cover flow for the iPad 2 with OS 5?

    I made a newer post about this same topic (trying to be a little more strategic) and this time I included a link to a video demonstrating my point. Here's the post http://discussions.apple.com/message.jspa?messageID=6574743#6574743.
    I couldn't agree with you more on the custom folder icon issues. I'm beginning to find out what the problem is on that. I have used the newest version of Candy Bar for my Home directory icons and that works fine, but there are some folders that I want to use a different icon for and leave the rest as they are. Candy Bar can't do this for me (as it only works with the generic icons) and so I used Apple's Icon Composer application (in the Developer Tools) to make the correct icon sizes for Leopard and then saved them as .icns but then copying and pasting that on a folder would result in the default ICNS icon and not my custom icon (that was under 10.5.1). So I finally got the custom icon to appear, but it only works for sizes 128x128 and lower, even though I put a 512X512 version in there. That's why it doesn't show up in Cover Flow. For some reason, Leopard "blacks" out anything larger than 128x128 on "Cut and Paste" icons. I found that out by copying my custom icon from the Get Info panel and then opening that in Preview and it shows a black background for the larger icons instead of the alpha channel. I'm still trying to figure this out. Also, IconBuilder seems to be doing the same thing (making and ICNS file) but it seems to work better. I haven't used that since I've upgraded to Leopard but from what I've read it should work, but I don't have Photoshop right now. Well, thanks for posting and agreeing with me on the Carousel view and I hope you check out my video. Thanks.

  • Cover flow for videos or is it just the cd art?

    Is there cover flow for videos or just cd covers?. I will have more video than audio on my itouch but they have never showed cover flow for video.

    I know what you mean Durwin, Unfortunatley this is not possible at this time, athough the good news is:
    It is something which can be added in a software update!! - I don't think you've seen the last of what the iPod Touch can do. Apple doesn't stop at the functionality of when you bought it.

  • Lack of UI and No Cover Flow for Videos?

    Why is there no cover flow in the iPod touch/iPhone/any iPods for movies and videos? I don't even remember seeing a menu bar at the bottom of the screen to view videos in different categories.
    Has anyone else noticed the lack of a good UI in the Video section of the iPod touch? I ask because this option is available in iTunes, and frankly, cover flow one of the coolest features, that is, whizzing through all your DVD covers.

    Your remarks are falling on deaf ears here no one works for apple here. PLease post your comments for enhancements at the link below.
    http://www.apple.com/feedback/ipod.html
    THese forums are for technical questions you may have with your ipod touch. Not for general discussions. product enhancements, and speculation.
    GFF

  • In iOS 7 GameCenter, is there a way to view more than 75 scores on the Leaderboard?

    I have an iPhone 4 running iOS 7. With iOS 6, I could view more than 75 scores on the GameCenter Leaderboard for various games.  Now with iOS 7, it appears to be limited to only the top 75 scores.  Is there a preference to allow more scores to be displayed, or is this game specific.  Your thoughts are appreciated.
    Thanks . . . Bill

    Do NOT repeat NOT use open in timeline. That function is for a specific purpose usually related to clip sync.
    Create a new project and edit your audio into the project not inside another clip's timeline.

  • Why A is better than B/G for Voice over WLAN

    Hello all,
    Now this post has some questions and statements in that you guys know all about and would like your valued advise and corrections/confirmations on the points.
    Why A is better than B/G for voice:
    B/G is congested, ie BT, Microwaves. Lots of other WLANs etc etc etc - FACT!
    More non-overlapping channels - FACT!
    The scatter and reflection on A is better than B/G. The idea being, the higher the frequency, the better the scatter. Would this be correct?
    Higher frequencies produce better penetration results through walls, I have read. Or is it worse. Cisco say worse in the document "2.4 GHz waveform of 802.11b and 802.11g can pass through many walls. The 5 GHz waveform of 802.11a has approximately half the tendency for a given power to transmit suitable amounts of energy through walls because of its higher frequency" Ref: enterprise mobility guide. I am a little confused on this ?
    A travels thru water and other moisture better than B/G, thus damp walls, wet walls, open areas (lets say between two buildings) would handle A better than B/G?
    The Fresnel Zone (clearance required of an obstacle without degrading signal) is better on the A band due to a small wavelength size. Would this be a major factor for an RF design engineer? Any more technical "dummies guide" to this subject would be good?
    OFDM handles signalling shortcomings like multipath fade better that previous modulations techniques (I know that G 11Mbps and above uses this also). Anyone have an English explanation to why this is? Also, please look at the graphic attached that shows the enterprise mobility guide in chaper 3, the table. What is the difference between the modulation and transmission type as many people refer to DSSS and OFDM as "modulation" I am a little confuse by this table.
    Can anyone give me any more reasons and facts, and clarify any of the points above so when someone comes to me and says, "ahh, just roll out voice on B/G" I can say well this is why not?
    Many thx indeed,
    Ken

    You have some good questions. The main reason why people are moving voice to 802.11a is the fact that there is more congestion in the 2.4GhZ spectrum. For example in a downtown area building. There are so many wifi devices out in the 2.4Ghz along with all the other interference that you get on that spectrum. 802.11a, the 5Ghz is a shorter wavelength, so the more it is susceptible to attenuation. The lower the frequency the better the signal can travel through various materials. Look at cell phones.... they are in the 800mhz or lower spectrum and they have greater distances than higher frequencies. Another reason is that if you have guest access, you have to look at devices you need supported. There might be legacy 802.11b clients or newer clients that only support 802.11b or 802.11g. So now the 5Ghz is open which give you more bandwidth for voice.
    Water is an RF killer no matter if you use 2.4Ghz or 5Ghz.

  • How can I view my full billing history for the app and music stores without iTunes installed?

    I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

    How can I view my full billing history for the app and music stores without iTunes installed?
    No.
    If my account has been compromised
    If you even think this may have happened, immediately change your password.
    See this -> Apple ID: Changing your password

  • How do I view more than one image at the same time in CS6?

    How do I view more than one image at the same time in CS6?

    Hi there
    If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

  • Process flow for the Mid-year Status Changes based upon the Qualifying Even

    Hi Experts,
    I'm looking some information for the process flow for the Mid-year Status Changes based upon the Qualifying Events. Basically, I need to know, what would be the impact of these changes on various info types (Via IT0014 - Deduction changes & so forth) and the things that needs to be considered during it's Configuration and the things that needs to be checked due to the occurrence of the change. I would greatly appreciate any kind of help/document.
    Thanks a bunch in advance,
    Thanks,
    Exertive.

    Hello guys,
    Can anyone has any kind of input on this? Basically, I need to know the procees for Mid-year status changes based upon Qualified events. Any kind of help is greatly appreciated.
    Thanks,
    Exertive.

  • How do you create a pdf which is in a readable view, rather than having to rotate the document?

    How do you create a pdf which is in a readable view, rather than having to rotate the document?

    This cannot be done with Adobe Reader. Do you have Adobe Acrobat?

  • How can I view and download iprocurement history for the past 1 year in Oracle?

    Hi,
    I'm presently using Oracle 12, how can i view and download iprocurement history for the past 1 year or longer in Oracle? The purpose is to view approval of claims etc..
    if not, where can i retrieve this information in oracle?
    Appreciate your urgent assistance.
    Best Regards, Michael

    Sign into your Account > Click on your account name > Click on Account > Purchase History
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
    Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

  • CAT!!! I kept my player for more than 7 hrs for the initial cha

    Hi Cat,
    I have kept my zen v plus for more than 7 hrs for the initial charge, still the Play icon not appeared on the display, its showing still the battery charging flash icon.
    TELL ME WHAT TO DO?
    Thanks & Regds,
    2CREATIVE

    Depends on how strong your wifi connection is.
    you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

  • How can I view my iTunes purchase history for the last year?

    How can I view my iTunes purchase history for the last year?
    (My account in the iTunes store will only give me my RECENT purchases)

    Sign into your Account > Click on your account name > Click on Account > Purchase History
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
    Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

  • Is magnets in an ipad cover, good for the ipad?

    Just wondering if magnets in an ipad cover, good for the ipad. Some poeple say its fine and other say its gives problems with you ipad.
    So what whitch one is it good or bad?

    The Apple cover has magnets. If magnets caused problems, Apple wouldn't use them.
    Magnets, if strong enough, can cause problems with hard drives like in a laptop, or like old floppy discs. However, the iPad uses a flash type hard drive not affected by magnets.
     Cheers, Tom

  • Can we have more than One DC for the sales organization and Plant combo?

    Can we have more than One DC for the sales organization and Plant combination?
    If yes can you please site a practical example to clear the picture

    Hi
    First of all in SAP sales orgs are assigned to distribution channels and the combination of sales org and distribution channel which is called distribution chain is assigned to plant
    There is  no direct link  between sales org  and plant or distribution channel and plant
    So  sales org  and plant combination doesnot exists and
    it is only sales org and dist channel combination which is  called as distribution chain only exists
    Nowhere in SAP we are assigning sales org to plant
    It is because sales org alone doesnot make sense and its combination with dist channel only makes sense
    because sales org is a selling org and the distribution channel is the route to sell and this combination has only to pick the material from plant to process sales to customers
    The relation between sales org and distribution channels is many to many and also vice versa
    Multiple sales orgs can be assigned to one distribution channel and
    Multiple distribution channels  can be assigned to one sales org
    Similarly the relation ship between Distribution chain (sales org+dist channel) to plant is also many to many and vice versa
    Similarly plants from other company codes can also be assigned to Distribution chain to facilitate intercompany processes
    In whatever way look at it the multiple distribution channels can be fit anywhere
    Regards
    Raja

Maybe you are looking for

  • Color wheel showing again with mail & other applications

    Please note I am a MAC user and not anything close to an "experienced" user - I can do what I need to on my MAC.  Any help/suggestions appreciated. From another post I gathered I should check my console at the exact time the "wheel" showed up and cop

  • Use of T-code IK34

    Hi all, When we execute  Tcode IK34 to record measurement reading, system is asking to enter each result(reading at measuring point) as because it is a mandatory field. User wants optional field so that we can skip some measurement point  without ent

  • Download from SAP - Get same info displayed by T-code CS03

    Is there an RFC that can be used to return to a VB program essentially the same information that shows on the CS03 display?  What I really want to get to is something that will return component, qty required,and an effective date for that component.

  • Put Header in ALV but error

    What I did is that I copy all codes from FBL1N to Z* for me to modify and put header on its report, And these error occur "The type syldb_sp is unknown" I already activate the include where this type was used. Is there anything I need to do more? Nee

  • [Urgent]How to import odi procedure from 11g to 10g.

    Hi All, I am trying to import odi code(interface/procedure) from 11g to 10g but gettting xml error. Please reply as soon as possible. Thanks