Carrier data update failure and droping calls continously

This issue with my new iphone 4s with only 1 carrier not all
carrier data update failure and droping calls continously & bad quality.my carrier which is ZAIN TELECOM/Iraq that not resolved with restore

After managed to keep my Z10 running again, it informed me, that there was a new update available, released at 6:38pm with 88MB.
I installed it, hoping that it would terminate the problems I mentioned in my initial post...and:
I can now JOIN THIS PROBLEM FRACTION:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Just-updated-to-latest-OS-and-phone-is-frozen-...
WHAT THE F IS WRONG WITH YOU PEOPLE????
I AM THAT CLOSE, SMASHING THAT DEVICE WITH A SLEDGEHAMMER!
Did I mention, that I normally charge my customers with 2.500€ a day, when they order my services as a communication consultant and that I do most of my business when I am mobile and traveling?
Due to Your sloppy work, I already "lost" a day, where I was not available and I did not get any kind of answer of You guys til know... Maybe I´ll should charge BlackBerry for each and every hour that I am "out of business" caused by Your work...

Similar Messages

Update failure and now phone wont turn on

please please help. as stated above the update failed and now the phone wont turn on.
i had charged the phone up so that wasnt the problem, it just said that the updater lost connection with my phone
can anyone help?
cheers

You did not specify what phone model you have.
Have a look at the link below to a post in the POK section regarding this issue.
/discussions/board/message?board.id=topfaq&thread.id=112

Another update failure and restore

An observation after another updater failure.
Do NOT update on a shared USB port. I have a USB dongle to let several USB devices be on one port. This is not normally not t a problem with syncing, but this will not work with iPad OS update.
Plug iPad directly into a USB port or it will probably fail. This is probably the same reason you can't plug into a keyboard USB port as not enough power to run the operation.

Apple recommends the same when syncing as well.

I recently updated Firefox and something called Fantistic Games has taken over my homepage and I can't get rid of it.

I used to get a field of 9 options to open when I opened a new page by clicking on the + button on the right side of the Search tab. After I updated Firefox a couple of days ago, my homepage had been taken over by something called "Fantasti Games". I can't find it anywhere to uninstall "Fantisti Games". I now have Google come up as my homepage when I open Mozilla Firefox, but each tab that I open comes up with the "FantastiGames" search engine. I need to get rid of that from my computer and revert back to what I had before, which was when I opened a new tab, I got nine large icons on the screen that gave me the choice of common sites to go to (such as AOL, YouTube, Weather.com, Google, etc.). Please tell me how to uninstall "FantastiGames".

This is embarrassing. It sounds like you have a third party program that has taken over your search engine, home page, and/or the default new tab page. Fortunately, this can be remedied easily:
# At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
# In the Add-ons Manager tab, select the Extensions panel.
# Select the toolbar you wish to remove.
# Click the remove button.
# Click "Restart now" if it pops up. Your tabs will be saved and restored after the restart.
After Firefox restarts, install the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Search Reset Tool]. This will remove the rest of the traces of this program from your Firefox.
For further information, please read [[Remove a toolbar that has taken over your Firefox search or home page]].
Did this fix the problem? Let us know!

Creative Cloud update failures and resets

Today, my computer unexpectedly crashed. In order for it to repair itself, it had to "revert to a previous version". Doing so altered the Creative Cloud software that I had installed the day before. At first, it looked like it had been removed, since the Creative Cloud shortcut -- and the one I had made for the two programs I downloaded, Flash and Photoshop -- had disappared from my Desktop.
When I went in search of the files to launch the programs, I couldn't find them in Computer > Local Disk (:C) > Adobe > Flash CC/Photoshop CC where they had been before.
I opened Creative Cloud and saw that there were updates availalbe for these two programs. I thought this might improve something, so I tried to update.
Photoshop CC gets about 50% through the update and then fails. No matter how much I retry, the same thing happens. When I choose "Learn more" next to "Update failed", it gives me the following error message.
Clicking on "More Details" sends me here.
But none of the files here or in the sub-folder can be executed by my computer/
Flash, on the other hand, updated perfectly -- but when I click on the Flash launcher file, it gives me this message.
>>> NOTE: It occured to me that I should uninstall and reinstall the separate programs -- but when I open the "Uninstall a program" section on my Control Panel, it DOESN'T EVEN LIST Flash and Photoshop.
Through a convoluted series of attempts to fix the problem, I have deleted many of my Adobe files, restored them from the Recycle Bin, uninstalled the Creative Cloud from my control panel, reinstalled it, and still nothing seems to work.
I'm a freshman art school student, and I got this Creative Cloud program for free. I NEED the programs it offers. And I desperately hope someone can help me with this problem!

Hello SamuraiJon
Here is a doc that should help your issue for this error u44m1p7
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
Let me know if this helps or not.
If you find that this resolves your issue or was helpful, could you please take a moment to come back to this discussion and mark the post as helpful. Doing so greatly benefits your fellow users
Thanks
Scott

After BIOS update failure and rollback, audio hot keys detect press but do not function

All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
I can press the key and the vertical volume indicator displays but it does not move.
At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
All HP drivers and software are updated to latest.
Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo. Will warrant further watching.
The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization).
TIA,
Tony
BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
The current running BIOS is F.63
The full results follows
HP ENVY TS 17 Notebook PC
5CG3331YPX
E9G82UA#ABA
Windows 8 64-bit
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
12GB
4GB Micron Technology 1600MHz
8GB Hynix 1600MHz
Intel(R) HD Graphics 4600
1920 x 1080
60
1965 KBC Version 93.51
F.63
IDT High Definition Audio CODEC
Bluetooth Hands-free Audio

Seems after another day,
The problem resolved itself.
No reboot, no significant changes to the machine I can think of since my original post.
Just a spontaneous self-fix.
Thx,
Tony

Repeated Update Failures and Misreadings

After the most recent update (2.01 bundle 358), owner deleted Zinio manually from the tablet. Destop Software reads the playbook as having OS 0.0 bundle 0, while table says it has 2.01 bundle 358. Steps tried:
1. Install update. Result: update failed.
2. Download Zinio from App World, install update. Result: update failed.
3. Restart playbook, install update, update complete, unplug playbook, hit okay, playbook restarted, replug playbook into computer. Result: OS reads as 0.0 bundle 0.
4. Restart playbook, restart computer. Result: OS reads as 0.0 bundle 0.
Side effects: Desktop software doesn't allow anything but OS updates and backups, computer cannot read blackberry device as being plugged in (i.e. cannot see it in Computer folder), as a result cannot transfer files from computer to playbook. System tray on computer recognizes when playbook is plugged in. Desktop software still recognizes device, but reads OS wrong.
Suggestions?

Hopefully you have copies of pic, videos and documents.
Try the following it is to debrick the playbook. I seriously hope this will help you.
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Credit for this solution goes to knottyrope.
Be a Shepard and not an iSheep.

Dynamical Call of ALV - No data update

Hi,
I tried to use use the ALV dynamically. With dynamically I mean that I that I have diffrent data structures, depending what was selected by the user. The first call of the program is always correct. The data is displayed correctly. But when the data structure is changing, the ALV display is not updated. For a better understanding I post a extract of my coding:
1. Creation of Container
CREATE OBJECT g_custom_container
 EXPORTING
 container_name = 'PARENT_CONT'
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
2.Creation of splitter container
CREATE OBJECT splitter
 EXPORTING
 parent = g_custom_container
 rows = 2
 columns = 2
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
container_2 = splitter->get_container(
 row = 1
 column = 2 ).
3.Dynamic Creation of alv object
CREATE OBJECT go_grid
 EXPORTING
 i_parent = container_2.
4. Get Fieldcatalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = lv_structure_name
 CHANGING
 ct_fieldcat = lt_fieldcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
5. Set table for first display
CALL METHOD go_grid->set_table_for_first_display
* EXPORTING
* i_structure_name = lv_structure_name
 CHANGING
 it_fieldcatalog = lt_fieldcat
 it_outtab = <lt_out_data>.
CALL METHOD ls_alv_ref-alv_ref->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
Perhaps someone could help.....
Best Regards, Edgar

Hello Edgar
The following sample report ZUS_SDN_TWO_ALV_GRIDS_8 shows how to solve your problem. Please note that for the sake of simplicity I replaced the tree containing the structure names with an ALV list. However, the switch between the different structures is triggered by the DOUBLE_CLICK event.
I like to add that the integration of the first displayed ALV list (DD02L) into GT_OUTTAB is not really elegant. In addition, with $TMP I marked a problematic part of the coding with respect to your requirement to have the right layout for each displayed ALV list:
If you have a fixed assignment of tabname -> 4-digit handle then it is ok. I my sample report the layouts only work if you select the tabnames in the very same order.
Before showing the entire coding I describe crucial parts of the coding:
[code]TYPES: BEGIN OF ty_s_outtab.
TYPES: tabname TYPE tabname.
TYPES: layout TYPE lvc_s_layo.
TYPES: variant TYPE disvariant.
TYPES: fcat TYPE lvc_t_fcat.
TYPES: data TYPE REF TO data.
TYPES: END OF ty_s_outtab.[/code]
Every time a new structure is selected the corresponding ALV data are stored as new record in GT_OUTTAB which is of line type TY_S_OUTTAB.
[code] READ TABLE gt_outtab INTO gs_outtab INDEX 2.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.[/code]
Since the ALV list data and the fieldcatalog are fully dynamic I use global field-symbols for these data.
[code]&----
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
SET TITLEBAR 'xxx'.
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT[/code]
The second ALV list which displays the table records is always newly displayed in the PBO module.
In the event handler method HANDLE_DOUBLE_CLICK we need to do two things:
- store the current fieldcatalog back to GT_OUTTAB
- store the name of the new selected table/structure -> trigger PAI
In routine HANDLE_DB_CLICK we create a new entry for GT_OUTTAB if it does not yet exist. Next we select this entry and display it again as second ALV list.
[code]
*& Report ZUS_SDN_TWO_ALV_GRIDS_8
*& Description: Display two ALV lists in splitter container (left/right)
*& Left ALV list contains DB table names,
*& right ALV list displays entries of selected DB table
*& SDN thread: Dynamical Call of ALV - No data update
*& Link: https:||Dynamical Call of ALV - No data update
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
PROCESS BEFORE OUTPUT.
 MODULE STATUS_0100.
PROCESS AFTER INPUT.
 MODULE USER_COMMAND_0100.
REPORT zus_sdn_two_alv_grids_8.
TYPE-POOLS: abap.
DATA:
gd_repid TYPE syst-repid,
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
TYPES: BEGIN OF ty_s_outtab.
TYPES: tabname TYPE tabname.
TYPES: layout TYPE lvc_s_layo.
TYPES: variant TYPE disvariant.
TYPES: fcat TYPE lvc_t_fcat.
TYPES: data TYPE REF TO data.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
 WITH DEFAULT KEY.
DATA:
gt_dd02l TYPE STANDARD TABLE OF dd02l,
gs_outtab TYPE ty_s_outtab,
gt_outtab TYPE ty_t_outtab.
FIELD-SYMBOLS:
<gt_fcat> TYPE lvc_t_fcat,
<gt_outtab> TYPE table.
 CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-DATA:
 md_tabname_selected TYPE tabname READ-ONLY.
 CLASS-METHODS:
 handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING
 e_row
 e_column
 es_row_no
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
 CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
define local data
 DATA:
 ls_dd02l TYPE dd02l,
 ls_outtab TYPE ty_s_outtab.
 CHECK ( sender = go_grid1 ).
 READ TABLE gt_dd02l INTO ls_dd02l INDEX e_row-index.
 " Store data of currently displayed ALV list (except for DD02L)
 IF ( md_tabname_selected = space ).
 ELSE.
 READ TABLE gt_outtab INTO ls_outtab
 WITH KEY tabname = md_tabname_selected. " old
 CALL METHOD go_grid2->get_frontend_fieldcatalog
 IMPORTING
 et_fieldcatalog = ls_outtab-fcat.
 MODIFY gt_outtab FROM ls_outtab INDEX syst-tabix.
 ENDIF.
 md_tabname_selected = ls_dd02l-tabname. " new selected DB table
Triggers PAI of the dynpro with the specified ok-code
 cl_gui_cfw=>set_new_ok_code( 'HANDLE_DB_CLICK' ). " not 4.6c
 CALL METHOD cl_gui_cfw=>set_new_ok_code
 EXPORTING
 new_code = 'HANDLE_DB_CLICK'
 IMPORTING
 RC =
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
gd_repid = syst-repid.
SELECT * FROM dd02l INTO TABLE gt_dd02l
 WHERE tabname LIKE 'KN%1' OR
 tabname LIKE 'LF%1' OR
 tabname LIKE 'VB%' OR
 tabname LIKE 'MAR%' OR
 tabname LIKE 'E07%'
 AND tabclass = 'TRANSP'. " transparent table
SORT gt_dd02l BY tabname.
PERFORM init_controls.
PERFORM add_first_table.
Set event handler
SET HANDLER:
 lcl_eventhandler=>handle_double_click FOR go_grid1.
READ TABLE gt_outtab INTO gs_outtab INDEX 1.
Display data
CALL METHOD go_grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 CHANGING
 it_outtab = gt_dd02l
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_outtab INTO gs_outtab INDEX 2.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.
NOTE: method called in PBO module
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
 CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
SET TITLEBAR 'xxx'.
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
 WHEN 'BACK' OR
 'END' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
User has pushed button "Display Details"
 WHEN 'HANDLE_DB_CLICK'.
 PERFORM handle_db_click.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form HANDLE_DB_CLICK
 text
--> p1 text
<-- p2 text
FORM handle_db_click.
define local data
DATA:
 ld_handle(4) TYPE n,
 ls_outtab TYPE ty_s_outtab.
READ TABLE gt_outtab INTO ls_outtab
 WITH KEY tabname = lcl_eventhandler=>md_tabname_selected.
IF ( syst-subrc NE 0 ).
 CLEAR: ls_outtab.
 ls_outtab-tabname = lcl_eventhandler=>md_tabname_selected.
 CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 I_BUFFER_ACTIVE =
 i_structure_name = ls_outtab-tabname
 I_CLIENT_NEVER_DISPLAY = 'X'
 I_BYPASSING_BUFFER =
 I_INTERNAL_TABNAME =
 CHANGING
 ct_fieldcat = ls_outtab-fcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CREATE DATA ls_outtab-data TYPE TABLE OF (ls_outtab-tabname).
 ASSIGN ls_outtab-data->* TO <gt_outtab>.
 SELECT * FROM (ls_outtab-tabname) UP TO 50 ROWS
 INTO TABLE <gt_outtab>.
 ls_outtab-layout-no_toolbar = abap_false.
 ls_outtab-layout-zebra = abap_true.
 ls_outtab-layout-smalltitle = abap_true.
 CONCATENATE ls_outtab-tabname ':'
 INTO ls_outtab-layout-grid_title.
 CONCATENATE ls_outtab-layout-grid_title 'Table Records'
 INTO ls_outtab-layout-grid_title
 SEPARATED BY space.
 ls_outtab-variant-report = gd_repid.
 DESCRIBE TABLE gt_outtab.
 ld_handle = syst-tfill + 1.
 WRITE ld_handle TO ls_outtab-variant-handle. " $TMP: Problem!!!
 APPEND ls_outtab TO gt_outtab.
ENDIF.
" NOTE: read into GLOBAL variable gs_outtab !!!!
READ TABLE gt_outtab INTO gs_outtab
 WITH KEY tabname = lcl_eventhandler=>md_tabname_selected.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.
ENDFORM. " HANDLE_DB_CLICK
*& Form INIT_CONTROLS
 text
--> p1 text
<-- p2 text
FORM init_controls .
Create docking container
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
 ratio = 90
 EXCEPTIONS
 OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking->set_extension
 EXPORTING
 extension = 99999 " full-size screen
 EXCEPTIONS
 cntl_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT go_splitter
 EXPORTING
 parent = go_docking
 rows = 1
 columns = 2
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = go_cell_left.
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 2
 RECEIVING
 container = go_cell_right.
CALL METHOD go_splitter->set_column_mode
 EXPORTING
 mode = cl_gui_splitter_container=>mode_relative
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_splitter->set_column_width
 EXPORTING
 id = 1
 width = 25
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_splitter->set_column_sash
 EXPORTING
 id = 1
 type = cl_gui_splitter_container=>type_movable
 value = cl_gui_splitter_container=>false
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create ALV grids
CREATE OBJECT go_grid1
 EXPORTING
 i_parent = go_cell_left
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
 EXPORTING
 i_parent = go_cell_right
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form ADD_FIRST_TABLE
 text
--> p1 text
<-- p2 text
FORM add_first_table .
define local data
DATA:
 ls_outtab TYPE ty_s_outtab.
ls_outtab-tabname = 'DD02L'.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
 i_structure_name = ls_outtab-tabname
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
 ct_fieldcat = ls_outtab-fcat
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GET REFERENCE OF gt_dd02l INTO ls_outtab-data.
ls_outtab-layout-no_toolbar = abap_false.
ls_outtab-layout-zebra = abap_true.
ls_outtab-layout-smalltitle = abap_true.
CONCATENATE ls_outtab-tabname ':'
 INTO ls_outtab-layout-grid_title.
CONCATENATE ls_outtab-layout-grid_title 'Table Records'
 INTO ls_outtab-layout-grid_title
 SEPARATED BY space.
ls_outtab-variant-report = gd_repid.
ls_outtab-variant-handle = '0002'.
INSERT ls_outtab INTO gt_outtab INDEX 1.
ls_outtab-layout-no_toolbar = abap_true.
ls_outtab-layout-zebra = abap_true.
ls_outtab-layout-smalltitle = abap_true.
ls_outtab-layout-grid_title = 'DB Tables'.
ls_outtab-variant-report = gd_repid.
ls_outtab-variant-handle = '0001'.
DELETE ls_outtab-fcat WHERE ( fieldname NE 'TABNAME' ).
INSERT ls_outtab INTO gt_outtab INDEX 1.
ENDFORM. " ADD_FIRST_TABLE[/code]
Regards,
Uwe

Reg: Update Failures

Hi All,
I am working on ECC6.0, I can see around 80 updates failed due to the following reason. ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC.
what should i do now? how can i come out from this?
kind regards,
praveen

Hi Praveen,
As the error message suggests, the failure was due to unique constraint violation on the object, which is fine as the object is consistant.
Get hold of the username / transaction and check with the users if they are having any issues with their records / data. If they find it to be consistant, just make note of the update failures and analyze which job / process caused duplicate records to be inserted.
Regards,
Nisch

X6 ovi maps update failure... please help!

Hi everyone,
I just got my X6 yesterday... I tried installing maps 3.03 on my X6, after the installation, a software update named 'ovi maps - with free navigations' appeared... I tried starting the update many times, but it kept on giving out the 'update failture' message... what happened? how can I fix this update failure and continue using my maps?
Please help!!!!
Thanks in advance

1. Download Ovi Maps 3.03 for X6 from HERE
2. Delete the cities folder and qf file from your phone (should be in mass memory)
3. Install the downloaded sis file on your phone.
4. Open the maps app on your phone and wait until folder structure is recreated
5. Connect your phone to Ovi Suite
6. Open View>Go To>Maps
7. Download the maps for your country
8. Download the voice guidance for your phone
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Frozen iPad screen; non responsive. MSG: carrier settings update....choose not now or update.... Neither respond and iPad will not totally shut down...date

MY husbands iPad screen is frozen. Will not shut down. Non responsive. Message: Carrier settings update....choose Not Now or Update.... Completely frozen & non responsive.

THank you Demo from Pittsburgh, PA. Holding the home button and power on button together for 25 seconds worked! Rebooted his system thx for the tip!

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
 CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
 READ TABLE it_error WITH KEY message_type = c_e.
 IF sy-subrc <> 0.
Commit
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x
 IMPORTING
 return = s_ret.
 endif.
endif.
if Status_change = 'X'.
 CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
 CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
 READ TABLE t_result WITH KEY message_type = c_e.
 IF sy-subrc NE 0.
 CALL FUNCTION 'BAPI_PS_PRECOMMIT'
 TABLES
 et_return = t_ret.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x
 IMPORTING
 return = s_ret.
 ENDIF.
endif.
 WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
Any ideas on the subject would be most helpful
Thanks in advance
Dingoh

The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
So, are you on version 9.2.1?
Was it Tiger or Leopard you had on the drive before?
iTunes 9.2.1 download...
http://support.apple.com/kb/DL1056

HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

Text messages and phone calls from March 2012 to date are missing after activating iphone5

text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

Carrier data update failure and droping calls continously

Similar Messages

Maybe you are looking for