Carry fwd all items to the current fiscal year 2014

Hi All
Can someone guide me on the following attached issue?
The year had ended on June,2014.
Regards
Pankaj

Hi,
Do you use automatic budget posting? You should check these OSS notes:
1620682     FMFG_ABP017 for PBET commit.budget on change of PO del.date
1170291     Automatic Budget Posting: error message FMFG_ABP017
1329638     Message "Wrong Fiscal Year" during Automatic Budget
1265858     Message "Wrong Fiscal Year" during Automatic Budget Posting
1632145     Automatic Budget Posting: error message FM_FGABP017
Regards,
Eli

Similar Messages

Withholding Tax not picking for the current Fiscal year 2014

Dear Gurus,
Withholding tax assigned to the vendor is getting picked up for the fiscal year 2013 but when the same vendor is invoiced for year 2014 with the same WHT tax code we could see that there is no tax line getting generated against the Vendor. All the configurations related to WHT are verified. As far as i Know we will not maintain any end date for WHT tax code. request yout to advance.
Thanks in advance.
Thanks & Regards
Srikanth

hi,
Please check below mentioned Path - and check date from & to given period
SPRO- Financial Accounting (New) - Financial Accounting Global Settings (New) -Withholding Tax -Extended Withholding Tax - Company Code -Assign Withholding Tax Types to Company Codes
select WHT type against Company code -
W/tax obligated frm 01.04.2010 Oblig.to w/tax until 31.12.2999
and check vendor master data -
Thanking you
Regards
Mahesh

To post write up in the current fiscal year

Hi,
I am trying to post write up in the current fiscal. However, the system is not allowed to post me. I know that the write-up needs to be posted from the next fiscal year. However, due to the requirement, we need to post in this current and switch off the message. I have already switched off the message in OBA5, but still, I cannot proceed to post with write-up in the current year. Is there a way that I can post this.
The following are the error details.
You cannot post write-ups
Message no. AA400
Diagnosis
According to the transaction type, you have to post to area 01. However, in this area, there is either no accumulated depreciation or the write-up depreciation type(s) are not managed in this area.
Procedure
Check the transaction type.
Regards,
Ravi

Hi Ravi,
A write up can only be carried out if you have cumulated depreciation   values (from previous years). In the current fiscal year depreciation should be posted the 'normal' way. Write ups mean that too much depreciation was posted in a previous year and that you will correct this in the current year. Therefore, the system does not allow posting write ups if there exist no cumulative depreciation values from   previous year. In other words you cannot perform a write up for an asset in the year of acquisition.
Also make sure that the depreciation area(s) is defined as such to manage cumulative depreciation type or write-up depreciation type. This should eliminate the error 'AA400'.
Following is the menu path to take:
CU: FI-AA
     -> Transactions
     - > Define Transaction Types for
         - > post-capitalization (trans. AO77 and OAXD)
          -> manual depreciation (trans. AO78 and OAXE)
For both,- select your Chart of Depr.
         - >select your Transaction Type
         -> select Depr. Area Specs.
Regards Bernhard
Edited by: Bernhard Kirchner on May 10, 2010 3:00 PM

Asset write off in the current fiscal year.

Hi Experts,
I want to write off an asset in next 4 periods of the current fiscal year 2007. For example:
Asset 11000
APC value: 10000
APC Date: 01.01.2005
The useful life will end in fiscal year 2008.
The book value left at the begining of the current fiscal year 2007 Rs. 4000.00
In the current fiscal year this asset has already been depreciated for previuos 3 periods.
Now Business wants to write off ( fully depreciated ) this asset in next 4 periods equally and then if the book value and tax value is nil, they want to scap the asset.
Now can you please tell me how to make this happened. Its very urgent. If you need any more information, most welcome.
Rgds,
BABA

Hi,
You would have to set the asset to manual depreciation(Depr.Key MANU)
and generate a posting via ABMA for each of the periods.
Kind regards

How to Determine the first day of the current Fiscal Year

I am a SQL Server developer who is trying to to learn Oracle SQL. I am trying to write a query that will 1) determine the month number and if the number is 10, 11, or 12, will return '01-Oct-' of the current Calendar year. If the month number is between 1 and 9, it returns '01- Oct-' of the last Calendar year (YYYY = current Calendar year minus 1 year).
I was playing with the EXTRACT function to get the year and month, but was unable to formulate the '1-Oct-YYYY' where YYYY is the current or previous calendar year, depending on whether the SYSDATE falls before or after 1-October.
Could anyone point me to an example of how to do this in Oracle?

We can use "add_months" B-)
select column_value,
extract(year from add_months(column_value,-9)) as y,
add_months(trunc(add_months(column_value,-9),'yyyy'),9) as oct
from table(sys.odciDateList(
date '2009-01-01',date '2009-09-01',
date '2009-10-01',date '2009-12-01'));
COLUMN_V Y OCT
09-01-01 2008 08-10-01
09-09-01 2008 08-10-01
09-10-01 2009 09-10-01
09-12-01 2009 09-10-01

How to Clear Cache for all Items of the Current Page of a TAB

Hi,
I am having a TAB, when that tab is clicked..it goes to suppose Page 1, what I want to Clear the Cache of Page 1 ...as soon as Page appears...
I don't see any option for that in the TAB Definition Properties....
Thanks,
Deepak

I got the solution....
refer by SCOTT...
Re: ApEx Development Team: tab clear cache - new feature?
thanks,
Deepak

Variable to display data from Current Fiscal Year to the MONTH entered

Hi Friends,
In the Quey Designer I require a CHARACTERISTIC VARIABLE for the 0CALMONTH which should have the following features:-
1.Input Month(e.g JUN 2008)
2.Mandatory
3.Ready for Input
The query should show the following OUTPUT:-
The data should be displayed from the CURRENT FISCAL YEAR to the value of the Input MONTH entered.
e.g For Input = DEC2008
Output = from APRIL 2008 to DEC2008.
Do we have a standard variable for this or we have to go for a Customer Exit??
Thanks in Advance!!!
Vivek

Hi,
Create a customer exit as follows.
WHEN 'ZCMTD'.
you variable name
data: ZCMTD_LOW like sy-datum.
ZCMTD_LOW = sy-datum.
ZCMTD_LOW+4(2) = '04'.
*replacing last two symbols (month) in the current month with '04'
CLEAR L_S_RANGE.
L_S_RANGE-LOW = ZCMTD_LOW.
*initializing low interval limit
L_S_RANGE-HIGH = SY-DATUM.
*initializing high interval limit
L_S_RANGE-SIGN = 'I'.
*defining interval as inclusive
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDCASE.
Thanks,
Ashok

Function module to read customer balances for current fiscal year.

Hi,
Could anyone please tell me about the function module which would display the customer credit balances from the FD10n transaction code for teh current fiscal year. that means from july 2010 to july 2011.

Hi,
use the BAPI 'BAPI_AR_ACC_GETCURRENTBALANCE'
CALL FUNCTION 'BAPI_AR_ACC_GETCURRENTBALANCE' "Closing balance of customer account in current fiscal year
EXPORTING
    companycode =               " bapi3007_1-comp_code Company code
    customer =                  " bapi3007_1-customer Customer
IMPORTING
    actual_balance =            " bapi3007_9    Carry forward balance and balance
    return =                    " bapireturn    Return Code
    . " BAPI_AR_ACC_GETCURRENTBALANCE
This method provides a customer's balance for the current fiscal year.
It displays both the balance of standard transactions and the total balance of standard transactions and all special general ledger transactions.
Read the Documentation of the BAPI.
Regards,
Dhina..

Current Fiscal Year

Hi,
Is there an oracle function that returns the current fiscal year in format (2012/2013)?
Thanks

Hi,
sliderrules wrote:
Is there an oracle function that returns the current fiscal year in format (2012/2013)?That depends on what you mean by fiscal year.
If a fiscal year begins on April 1 of every calendar year, then
ADD_MONTHS ( TRUNC ( ADD_MONTHS (d, -3)
                  , 'YEAR'
        , 3
        )is the beginning of the fiscal year that contains DATE d. The "magic number" 3 reflects the fact that the fiscal year starts 3 months after the calendar year.
If you want a string like '2012/2013' that shows the calendar years when the fiscal year begins/ends, then use the expression above to get the beginning date, use EXTRACT to get the year as a number, and then add 1 to it.
If you're just interested in the year number, as in your message, then you don't need the outer ADD_MONTHS or TRUNC; you can just EXTRACT the year from <tt>ADD_MONTHS (d, -3)</tt>
You might consider a user-defined function for this. It will be slower than doing it in pure SQL, but it will be a lot more convenient. You don't have to use the function in situations where performance is an issue.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}
Edited by: Frank Kulash on Mar 14, 2013 11:30 AM

ALV Report to check upto current fiscal year

Hi All,
I am running a reoprt. its output is in this way.
Division                Fiscal year                                  Net Price.
Chemical              2006                                              3456456
                            2007                                             5456436
                           2008                                                  45345
                           2009                                                   4545
                           2010                                                     45456
                          Over Due
                           Due
                            0 to 30 days
                          and so on
Now My problem here is I have this secctionof cede it should increase my fiscal year, But I checked it in the run time its not stopping at the S-fkdat-high, ( I mean in the current fiscal year.). Here also I am posting the section of code.
Can any body identitfy where my code is wrong, and why its not stopping at the currennt fiscall year.
S_FKDAT = S_FKDAT-LOW+0(04).
APPEND S_FKDAT.
DO.
IF NOT S_FKDAT IS INITIAL.
S_FKDAT = S_FKDAT + 1.
APPEND S_FKDAT.
CHECK
S_FKDAT = S_FKDAT-HIGH+0(04).
STOP.
APPEND S_FKDAT.
ENDIF.
ENDDO.
Thanks in Advance
Edited by: Ravi Narayan Padhi on Oct 14, 2010 3:09 PM

HI,
iam not getting wat ur try to do here in this logic can u elaborate the logic
As per my understanding ur requirement logic should be -->
if not S_FKDAT[] IS INITIAL.
read table S_FKDAT index 1.
    while S_FKDAT-low ne sy-datum+0(4).
         S_FKDAT-option = 'I'
         S_FKDAT-sign = 'EQ'
         S_FKDAT-low = S_FKDAT-low + 1
         APPEND S_FKDAT.
    endwhile.
endif.
Regards,
Madhukar Shetty

I would like to display current fiscal year always on variable screen

Hi
I have requirement in which I would like to display the current fiscal year on variable screen in BI Report.
we have a standard variable however the sap exit to display the current fiscal year is not shown...
Can any one tell me, how to proceed in this case.
Thanks
Chetan

Hello,
For I-step = 1, use the function module DATE_TO_PERIOD_CONVERT.
here for IMPORT use i_date = sy-datum and i_periv = ur fiscal variant.
The output is e_buper contains fiscal period and e_gjhar contains fiscal year.
The use concatenate to join fiscal year and fiscal period to the variable low value.
Regards,
Shashank

ABST2 - How to take the report for the previous fiscal year

Hi,
For FI-AA reconciliation, my scenario is this: The current fiscal year is 2009 and the system (server) date is 16-Apr-2009. My fiscal year period is: Mar-Apr. In ABST2, it does not accept Fiscal year. When I take the report, it displays for fiscal year 2009, which I don't want because I want it for the fiscal year 2008 to reconcile between FI and AA. The fiscal year 2008 is not yet closed in both FI and AA, so I want the report for 2008 only. But ABST2 always gives the report for the current fiscl year. Is there any way out to get the report for 2008?.
Thanks,
Kannan S

This report is based on the actual values. In the past this report was used for EURO conversions to see if the values are in line. When not it was not possible to do the euro conversion.
Normal it is a part from the fiscal year closing

How to design extractor can have only current Fiscal Year data.

Dear Experts,
I require a full upload DSO , which can have only current fiscal year data . I have created view putting there certain conditions for minimising the data size. How i can restrict it , to have only current fisacal year data for YTD reports. It would be daily uploaded.
Should i created Data Source based on function ?
Regards,
Anand Mehrotra.

while extracting the data from source you can set the filters at the info package level so that it will not extract the previous years data.
In the data selection tab in Info package enter the current fiscal year and schedule the IP it will extract only the current year data.
next execute the DTP to load data till DSO.
the data is restricted in the infopackage level before entering to PSA so there is no need to write any routines in the DSO level.
Edited by: prashanthk on Feb 1, 2011 12:45 PM

HT5429 How do I remove items from the "current location/to" list?

In MAPS, how do I remove items from the "current location/to" list?

Hit the book icon and you will see delete all option. I have not found a way to delete them one at a time.

Calculate the current fiscal quarter based on zero based month index

Hi All,
I need your help to Calculate the current fiscal quarter by adding 1 to a 0 based month index, dividing by 3.0(float or double) and getting the ceiling integer then add one to that number to get the “fiscal” quarter, taking care to loop back to quarter one as necessary.
please help me to get this.
Thank you in Advance.
Ram.

Hi,
933478 wrote:
I need your help to Calculate the current fiscal quarter
The Q datetime format doesn't match your need ?Scott@my11g SQL>select sysdate, to_char(sysdate,'Q') currentQuarter from dual;
SYSDATE             CURRENTQUARTER
10/05/2012 17:35:02 2If your input is the 0-based month, then you could just :Scott@my11g SQL>with monthes as (
2 select level-1 mon0 from dual connect by level <=12
3 )
4 select mon0, to_char(to_date(mon0+1,'mm'),'Q') quarter from monthes;
      MON0 QUARTER
         0 1
         1 1
         2 1
         3 2
         4 2
         5 2
         6 3
         7 3
         8 3
         9 4
        10 4
        11 4

Carry fwd all items to the current fiscal year 2014

Similar Messages

Maybe you are looking for