Carry out ftps through a CSS11501-SCA11000 ?

Is it possible to carry out ftps through a CSS11501-SCA11000 ? If yes, please send me the details and a configuration example.
rgds, Geert.

Hi
Can you check whether the following business function set were actviated
Business Function LOG_EAM_CI_1
Business function LOG_EAM_CI_2
Regards
thyagarajan

Similar Messages

  • How can SAP tRFC server tell client through JCo that function carried out?

    SAPs "Transactional RFC Technical Description" document (release 4.0) says in section Transactional RFC on page 6: "Finally, the server tells the client, that the function has been carried out and the client acknowledges this.".
    How can the server tell this to the client when the server communicates with the client through JCo (Java Connector)?

    System.out.println goes to console, which is not a file... This whole thing is much easier if you use standard logging:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm

  • PAYMENT PROPOSAL COULD NOT BE CARRIED OUT

    I did payment run program for one vendor F110 i have 3 invoice. within this invoice one invoice i did payment block at the time of payment proposal in F110 , the remaining two i cleared and i got all result after some days according to the next payment run date i am trying to do payment run F110, At the time schedule proposal the error system showing "PAYMENT PROPOSAL COULD NOT BE CARRIED OUT". Now i need clear that invoice wht i do through F110.....
    Moderator: Please, use proper forum and don't post in CAPITAL letters

    Hi,
    Please go to Su01 enter your user ID click on  default Tab and in output Device field please enter Output device and then re-run the proposal again.
    Hope it helps.
    Br,Vivek

  • Error "Multi-level error propagation carried out" when I run a report

    Hi All,
    When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
    Planning Version - Simulation Version XXX
    Evaluation Start - 05/03/2011
    Evaluation End - 12/31/2013
    Evaluation List - Extended Operation List
    I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
    I have tried by ruuning Live cache consistancy check, but the issue is not fixed
    Please help me to resolve this issue
    Thanks & Regards,
    Rajkumar

    Hi Jack,
    Please do post the server log file here so that we can try and find a solution for the problem you are facing.
    I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
    If it doesnt we can go through the server log and try to identify the cause of the problem.
    Cheers :-)

  • Unable to carry out calculation of keyfigure with it's total summation taken on keyfigure

    Hi,
    For a requirement, we are trying to calculate division of a keyfigure with it's total summation of key figure.
    For example:
    Sales Office
    Order Reason
    Invoice Volume
    MRV Volume
    % of MRV Volume to total invoice volume
    % of MRV Volume to total MRV volume
    1504
    A1
    10
    2
    (2/90) = 2.22
    (2/27) = 7.40
    A2
    5
    3
    3.33
    11.11
    A3
    20
    10
    11.11
    37.03
    A4
    30
    5
    5.55
    18.51
    A5
    25
    7
    7.77
    25.92
    Total
    90
    27
    30
    100
    Here, Sales office and order reason are dimensions.
    Invoice volume and MRV volume are key figures.
    Following are the formula used to calculate other two keyfigures.
    % of MRV Volume to total invoice volume =  MRV Volume / Total ( Invoice Volume ) * 100
    % of MRV Volume to total   = MRV Volume / Total ( MRV Volume) * 100
    Kindly help us to get calculation of above two keyfigures to be carried out through BEx query designer.
    I tried out aggregation at order reason on Invoice volume, MRV Volume by creating two new formula keyfigures with the aggregation, but couldn't get desired output.
    Regards,
    Antony Jerald.

    Hi Antony,
    Use the same formula for these two keyfigures in BEx with SUMGT instead of Total.
    % of MRV Volume to total invoice volume =  MRV Volume / SUMGT ( Invoice Volume ) * 100
    % of MRV Volume to total   = MRV Volume / SUMGT ( MRV Volume) * 100
    Regards,
    Srilakshmi B

  • Paymen Proposal Could Not Be Carried Out

    Hi to all
    I am posting an expenditure transaction by using the t code RVND for yourself cheque creation with out vendor creation  and one entry is generating in background.
    the enry is
    Expense a/c                    DR
    clearing a/c for payment CR
    Then after i am running Payment Program.At that time i am getting the message as "Payment proposal could not be carried out"
    Can you help me.
    Thanks&Regards
    Raja

    Hi,
    F110 is meant fro the payments we are supposed to make if we know who the vendors is, otherwise to whom will the system pay money, how will the system under stand to whom it should be paid, more over all the credit purchases we have made from the vendors  or advance paynments from us to the vendors will be processed .
    Clearing account is not the payment made through bank, hence it is showing you the errors.
    Thanks,
    Shilpa.
    Edited by: ashilpa54 on Jan 12, 2011 4:55 AM

  • PO Attachments using Carry Out Sourcing not transferred to Backend

    Hi SDN Team,
    I have an issue with PO Attachments using Carry Out Sourcing.
    The version I am using is SRM 5.0 which is connected to SAP ECC 6.0.
    The necessary configurations for attachments are made in ECC.
    When I create a SC through the normal procedure, with PR and PO getting created, the Attachments are getting transferred to the backend ECC, with the following code in the BADI BBP_CREATE_PO_BACK, method FILL_PO_INTERFACE.
    Code :
      clear cv_attach_use_url.
      cv_attach_transfer_active = 'X'.
      cv_attach_be_doc_type     = 'SRM'.
      cv_attach_be_storage_cat  = 'DMS_C1_ST'.
    But, when I create a SC, then create a PO via Carry Out Sourcing, that is the direct PO without PR getting created, the attachments are not flowing to the backend system.
    1. Now, is there any specific settings which needs to be made for PO Attachments using Carry out sourcing?
    2. I am aware of the BADI "BBP_CREATE_BE_PO_NEW", but even that is not helping me at the moment.
    3. There are no entries created in the table BBP_PDATT too, also no document is created in CV02N tcode in ECC.
    Since I am new to SRM, your valuable suggestions, would be of great help.
    Thanks for your assistance in advance.
    Best Regards,
    Arun.

    Please use program BBP_REQREQ_TRANSFER to create PO in R/3.Let me know you face further problem.
    Sanjay

  • Division cannot be carried out because divisor is zero - EA00

    hi,
    While doing EA00 transaction following error occurs:
    During billing simulation, a termination occurs with message AJ020 (Division cannot be carried out because divisor is zero) or AJ097 (Unexpected termination in variant &1 in schema &2)
    I gone through the note 402960
    Note says, The termination can occur, for example, when
    1) you choose pushbutton "Overall check" on the move-in screen,
    2) the move-out date of a contract is equal to the move-in date,
    3) one-day time slices are to be billed
    The overall check in the move-in is called with a one-day time slice.That is, the move-in date is selected as the to-date.
    Solution
    Correct your billing schema.
    Use IF nestings to make sure that only schema steps, which can also be executed with zero values, are executed. For example,a division by zero should be avoided.
    My problem is I did not understood what exactly has to change in schema.pls help???
    Regards,
    Chetan

    Can you mention the variant Program you are using on this step. The Divisor operand value seems to have become zero. You may need to check how this operand value is being populated.

  • Can I carry out the persistence and ORM tasks using EclipseLink?

    Can I carry out the persistence and ORM tasks using EclipseLink (without TopLink or Hibernate) ?
    Is the EclipseLink a free tool and no license fee?
    How about TopLink Essentials?
    Edited by: junez on 18-Nov-2009 05:51

    junez wrote:
    Can I carry out the persistence and ORM tasks using EclipseLink (without TopLink or Hibernate) ?
    Is the EclipseLink a free tool and no license fee?And yes, EclipseLink is an open source project so there are no license fees. However, Oracle does redistribute EclipseLink as part of the Oracle TopLink product and therefore customers are able to access support for EclipseLink through Oracle support.
    --Shaun                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • 'Carry-out Mass changes in Equipment/Functional Locations

    Dear Experts,
    Through one SCN thread, I came to know that there is a functionality namely 'Carry-out Mass changes' in the GOTO menu in the List editing ALV screens of Equipment/Functional Locations (IE05, IH08, IH06 etc)
    But, I am not able to find any such (Carry out mass changes) function in any of the menu items in IE05, IH08, IH06 etc.
    Can someone help clear this situation.
    Regards
    Jogeswara Rao

    Hi
    Can you check whether the following business function set were actviated
    Business Function LOG_EAM_CI_1
    Business function LOG_EAM_CI_2
    Regards
    thyagarajan

  • Carrying out Transactions on Mobile Device Interface

    Hi
    We installed IIS and we have checked the AII mobile transactions through WebSAPConsole. It is working fine.
    We now want to carry out these transactions through the Intermec IP4 handheld device that we have. What are the things that need to be in place for us to carry out the mobiletransactions on this device? Will I be able to scan an RFID tag and see the UID on the screen? The device is an intelligent device, has Win CE on it.
    What are the steps.
    I have accss to the pdf: "SAP AII mobile RFID device integration Guide".
    Regards
    S

    Hi Ron
    Sorry for coming back after such a long time gap.  I am asking a lot of questions here in this message, sorry about that.
    I am unable to explain to our device supplier and get the XSLT file for Intermec device. I could not find it online, like other manuals of Intermec. Any idea how I get this file for the IP4 model?
    You mentioned i-Browse. Will the XSLT work only if the browser is i-Browse? Will it not work with IE on the handheld? Will the XSLT file require mofications then? Maybe if I had the XSLT, I would not be asking you as many questions.
    If we have the XSLT file, are you saying that once the reader trigger is pressed to read a tag, the UID value would appear on the ID text box on the screen? How is this achieved? I would like to understand the architecture here please :- how the tag value gets passed from reader to the handheld to display on the active cursor field.
    Regards
    Sankar

  • Mac book pro playing out audio through the HDMI but only in mono since update

    Hi there
    I've got a mid 2010 macbook pro that used to play audio and video perfectly through the HDMI output until I updated to 10.7.4 and the
    firmware (11E53). Now it plays in mono and only on the right speaker. It seems to have disabled the ability to change audio preferences on my AV receiver as well. Has any one else been getting similar problems ?
    Thanks
    Hughspeers

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • How to find original document for which settlement has been carried out.

    Hello Friends,
    As a process of period end, we have executed the automatic settlement for assets under construction for an internal order through KO8G.
    After completing the run system has posted a document successfully.
    When I want to check the original document for posted document through FB03, through   Environment  Document Environment  Original document. System is showing the same settlement document rather than the original document. 
    Can any one explain me how to check the original document for which settlement has been carried out.
    Regards,
    RS

    "Original document" means from where the document originated. Means for eg MM invoice will be original document for FI invoice. Hoever for settlement document, Settlement process it self is the origin for posting. This way, You cannt trace back the Fi postings which got settled. You need to run line item report for the object and analyse the Fi postings and corresponding Settlement postings

  • When u carry out scheduling (at operation mode)?

    hi all,
    Can any one explain while scheduling is carried out it can be scheduley immtly or at particular time day.
    Can anyone explain scheduling at operation mode what does this mean. illustrate with an example.
    thanxs
    hari

    Hi Sujit,
    Thanks for your reply!
    I tried CWBQM. Unfortunately could not succeed. I think may not be feasible through CWBQM.
    But I came across T-Code CEWB . There I opted "SAP_OPERATION" as working area and it worked. Its quite useful T-Code.
    Thanks again for your input.
    Regards,
    Anand Rao

  • "Multi-level error propagation carried out" in SCM 5.0

    When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
    Multi-level error propagation carried out
    Message no. /SAPAPO/OM242
    Could you please give me this help?
    Thanks,
    Lian

    Hi,
    Thank you for the information, but the problem is still there though I de-activated all user-exits...
    I also saw the following error:
    Invalid planning version
    Message no. /SAPAPO/OM015
    Thanks,
    Lian

Maybe you are looking for