Carry out repairs in non-original system only if they are urgent

Hi Experts,
I am getting this message "Carry out repairs in non-original system only if they are urgent" while i try to edit a z function module which i have created in the development system. Because of this I can't change the code, I need to use the insert, delete....buttons.
Please help , itz urgent.
Thanks & Regards,
Soumya.

Hello Soumya
Obviously the Z-function module was originally created on another development system. Therefore you get this message.
If you have transferred your function group to another development system then simply change the source system of the function group. You can do this using transaction SE03 (function "Change Object Entries...") or you can use function module TRINT_TADIR_MODIFY.
Regards,
Uwe

Similar Messages

Msg in Dev Box - Carry out repairs in non-original system only if urgent

Hi, I noticed that I am getting the message "Carry out repairs in non-original system only if they are urgent" when I try to edit certain DTP's in my Development BW Envirionment. This is very unexpected and caught me by surprise.
1. Can anyone tell me what might be causing this?
2. Can anyone tell me what Table I might be able to peruse and determine what the source system is for this DTP?
Thanks for any help with this...

HI
You will get this warning for when modifying an object in ANY system, if that object was not created in that system, but transported from some other system. So, you will get this warning in your Quality/Test/Production systems for the objects which are transported from Development system.
Just ignore if it is in the DEV SYSTEM OR talk to the system administrator.
Hope u got it,
Thanx & Regards,
RavIChandra
Edited by: Ravichandra.bi on Dec 8, 2011 4:04 AM
Edited by: Ravichandra.bi on Dec 8, 2011 8:24 AM

Carry out repairs in non-original....

I am trying to update a few programs that are z programs but I get the follow message each time I go into edit mode:
'Carry out repairs in non-original systems only if they are urgent'.
Is there a way for me to get rid of this message? I can't figure out how to update these programs.
Regards,
Davis

It is in change mode but I can't make any changes. I have to click the button that says INSERT and that inserts the following code:
[code]*{ INSERT &$&$&$&$ 1
*} INSERT[/code]
So each time I need to insert code I would have to click on this button which doesn't seem right to me.
Regards,
Aaron

Error "Package in non-original system only modifiabl with Organizer Tools"

Assign Customer Objcet PROG to Package "Z001"(created by myself),it pop-up error "Package in non-original system only modifiabl with Organizer Tools"
how can i deal with this error?
could any warm-hearted fellow give me some tips ?
tks a lot !

Hi sophie,
i think you transported this package from another system to a new system and you are trying to modify the package.
just have a look at below link hop it will help ,otherwise let us know
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm
cheers
shibu

Message: carry out repairs..

BW Experts,
When we get this message, what does it mean.
'Carry out repairs in non-original system only if they are urgent
Message no. TR850'
does it mean the current system is a copy of a system. So this message can be ignored rite ?
Thanks,
BWer

Hi,
this message also occurs in sandbox systems which are copied from prodsystems. here you can ignore.
/manfred

Carry out repairs...

hi experts,
i have receive following message when i want to modify a Z program:
Carry out repairs in non-original system only if they are u rgent.
And if i click continue the source code is not editable.
What should i do?
Thank you.

Ya ,
It goes like that only..
It is because this program is transported may be from the other
server and the creator request locks it, but once you are in,
a subrequest is created under your name, and next time it
allows you to change that.
And the message is a standard for everytime you go to change the
already existing code in the non-original i.e. non production system.
Hope I am clear enough
Sumit.

Account assignment cannot be carried out because of different origin no

Hie Guru's
While saving excise invoice (J1iiN) iam getting the below error
Detailed Error Diagnosis :-
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 10000003 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document.
NOTE :- IT'S MTO SCENARIO. WITH REQ CLASS 040 (Consumption :- E)
Thanks in advance,
Denish

Hie JP,
This is not related to project at all. The stock is purely reseved for my sales order (and since my sales order is created with reference to quotation the stock is reserved for my quotation). While debug I found the route cause for this, if we see the function module "SD_DOCUMENT_ACCOUNT_ASSIGNMENT" (this FM is called at the time of quotation, sales order, stock taking, billing and excise invoice). Now in this FM :-
CALL FUNCTION 'SD_VBAK_SELECT'
    EXPORTING
      i_document_number = i_document_number
IF ( vbap-vbeln NE vbap-vbelv OR
       vbap-posnr NE vbap-posnv ) AND
       NOT vbap-vbelv IS INITIAL.
The i_document_number found in my excise invoice is sales order nmbr. Thus vbap-vbeln NE vbap-vbelv condition in my IF loop gets satisfied (because vbap-vbeln = sales order numbr & vbap-vbelv = quotation numbr) and it goes further. THIS SHOULD NOT GO FURTHER.
Like I said this FM is called at the time of billing also, so at that time the i_document_number is quotation number thus
vbap-vbeln NE vbap-vbelv codition does not satisfy (because vbap-vbeln = Quotation numbr & vbap-vbelv = Quotation numbr) and it doesnt fo further.
I hope I am able to convay my message. Please do let me know if you find something regarding the same because this is a Std. FM which will be same for everybody.
Regards,
Denish Patel
Edited by: denish__01 on Oct 12, 2011 9:59 AM
Edited by: denish__01 on Oct 12, 2011 10:01 AM

Generate Change Pointers in non Original System

I have developped in the inbound badis a trigger to generate the change pointers in a non-original system.
Do you know if there is a standard way to generate change pointers in a non-original system?
Landscape is as follow:
Original System => Intermediate System => Final System
I would like to generate change pointers in the Intermediate System to transfer master data into the Final System...

Hi,
Thanks for your reply.
the configuration for change pointers is already done, the problem is that if changes are send from the original system, it doesn't generate a change pointer in the intermediate system.
In the end, the intermediate system doesn't send the information to the final system as there are no change pointers generated by the changes received from the original system.
What I'm doing at the moment is to generate those change pointers in the inbound badi in the intermadiate system, I'm wondering if there is not a standard solution for this kind of implementation.
Cheers,
Lucien.

[nQSError: 22023] An arithmetic operation is being carried out on a non-num

Hi All,
I have created a logical column for rolling period based on a measure. I have used newly created rolling period column to create another column. I have checked the global consistency there were no errors in rpd. I have uploaded the rpd, when I was trying to expand that table in Answers it is giving an error *"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22023] An arithmetic operation is being carried out on a non-numeric type. (HY000)"*
The base measure has aggregation rule. Please help to find resolve this issue.
Thanks in advance.

Rolling Amount- "PeriodRolling("Core"."Fact - Sales - Orders"."Order Amount" , -10, 0)"
Amount- "case when VALUEOF("No_of_Days"."No_of_days") <= 10 then ( "Core"."Fact - Sales - Orders"."Rolling Amount" / 10) * VALUEOF("No_of_Days"."No_of_days") else "Core"."Fact - Sales - Orders"."Order Amount" / VALUEOF("No_of_Days"."No_of_days") end"
I have created above two measures.
Expand table means we need click on + symbol besides the table name to select columns, it is not allowing me to click on that + sysmbol.

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

Warning: There are Java errors for this object. The wizard will be read only until they are corrected.

when I try to open seeded VO.xml from Jdeveloper it is giving below error. Can any one please help me out.
Warning: There are Java errors for this object. The wizard will be read only until they are corrected.
R12 version 12.1.3
Jdev patchp9879989_R12_GENERIC.zip
Thanks
Venkata .T

Hi Venkata,
Same thing happening to me, R12.1.3. Please let me know if you find anything on this.
I tried some steps in this forums related to this, but no change. however I am not worried, customization works perfect after extension, but wanted to know the reason.
Thx..

...notifications are a paid only feature, they are not available with a free account...

Hi Support-Team,
is there a chance to change this:
"... notifications are a paid only feature, they are not available with a free account ..."
If we can't send a notification to an other user FormsCentral doesn't make sence and will cancel the account... That would be a pity, because otherwise everything would work very well.
Kind regards
Andreas

Hi;
Thanks for your feedback, but notifications are a paid feature and are not available in a free account. That isn't likely to change. Hopefully there is enough value in this and the other features of a paid account for you to consider an upgrade.
Thanks,
Josh

Help!? cant gift songs due to error message album only - but they are not!

Hi!
I recently updated my itunes and now 9 out of 10 songs I try to gift won't as they are apparantly 'album only' - but they aren't!
anyone know if this is solvable? Or is it a glitch with itunes and vista - but I had no problems till I said yes to latest version of itunes!
many thanks

Contact iTS support about it.
http://www.apple.com/support/itunes/store/
They'll probably need to know the exact track names. You can right-click on tracks in ITS, "Copy iTunes store URL", and paste them into your message.

Track conneactions - DCs are availabe only after they are in production...

Hi
I have 2 SCs in 2 different tracks
SC1 contains EJBs
SC2 contains FE components
since the FE components need to leverage the EJBs I have set up track connections (of type transport) between the 2 SCs (SC1 = source, SC2 = target)
now i need to develop a new feature, that requires changes both in the EJB and in a FE component
it seems like i cant start working on the FE component, until the EJB changes are in production, as the track connection will only transfer the SP to SC2 after it is deployed to production...
I need to work on both components in the same time, and deploy the 2 SPs together?
is it possible?
please try to avoid gicing a solution that involves changing my SC design...
I have made it sound simplistic here for the sake of the SDN quesion, but in reality I have more than 2 SCs and they are interdependent in a way that I have to have all SCs with EJBs in Track1, and all SCs with front end compoenents in Track2.
Thank you
Zach Engel
Check Point

Hi Zach,
Apart from waiting till your first set of developments are approved and ready for import in the second track, i dont think there is any other way.
Regards
Sidharth

Sending forms as read only after they are filled out

Hello, I am having lots of issues with the latest form I am doing in Adobe Designer 7.0. I am not experienced at all with this software. My question I think is easy but nothing ever is. When I submit forms with a submit button to an email address can the attached pdf be set to be read only so the recipient can not make changes to it?
Pleae help....
Thanks in advance.
Crysta

Hi Crysta,
you could add some functionality in your form. On the email submit add code to set a value (of an invisible field or directly in the data). Next, in the form ready, run a script that checks if the value has been set, if so, then set the access of the form to "readOnly". Please note that this is no real security. If you need that, you should use encryption and signature fields.
example for adding data: http://partners.adobe.com/public/developer/en/livecycle/lc_append_data_sample.zip
or checkout all samples:
http://www.adobe.com/devnet/livecycle/samples.html
Kind regard, Marijn Sponselee

Carry out repairs in non-original system only if they are urgent

Similar Messages

Maybe you are looking for