Carry out repairs...

hi experts,
i have receive following message when i want to modify a Z program:
Carry out repairs in non-original system only if they are u rgent.
And if i click continue the source code is not editable.
What should i do?
Thank you.

Ya ,
It goes like that only..
It is because this program is transported may be from the other
server and the creator request locks it, but once you are in,
a subrequest is created under your name, and next time it
allows you to change that.
And the message is a standard for everytime you go to change the
already existing code in the non-original i.e. non production system.
Hope I am clear enough
Sumit.

Similar Messages

Carry out repairs in non-original....

I am trying to update a few programs that are z programs but I get the follow message each time I go into edit mode:
'Carry out repairs in non-original systems only if they are urgent'.
Is there a way for me to get rid of this message? I can't figure out how to update these programs.
Regards,
Davis

It is in change mode but I can't make any changes. I have to click the button that says INSERT and that inserts the following code:
[code]*{ INSERT &$&$&$&$ 1
*} INSERT[/code]
So each time I need to insert code I would have to click on this button which doesn't seem right to me.
Regards,
Aaron

Carry out repairs in non-original system only if they are urgent

Hi Experts,
I am getting this message "Carry out repairs in non-original system only if they are urgent" while i try to edit a z function module which i have created in the development system. Because of this I can't change the code, I need to use the insert, delete....buttons.
Please help , itz urgent.
Thanks & Regards,
Soumya.

Hello Soumya
Obviously the Z-function module was originally created on another development system. Therefore you get this message.
If you have transferred your function group to another development system then simply change the source system of the function group. You can do this using transaction SE03 (function "Change Object Entries...") or you can use function module TRINT_TADIR_MODIFY.
Regards,
Uwe

Msg in Dev Box - Carry out repairs in non-original system only if urgent

Hi, I noticed that I am getting the message "Carry out repairs in non-original system only if they are urgent" when I try to edit certain DTP's in my Development BW Envirionment. This is very unexpected and caught me by surprise.
1. Can anyone tell me what might be causing this?
2. Can anyone tell me what Table I might be able to peruse and determine what the source system is for this DTP?
Thanks for any help with this...

HI
You will get this warning for when modifying an object in ANY system, if that object was not created in that system, but transported from some other system. So, you will get this warning in your Quality/Test/Production systems for the objects which are transported from Development system.
Just ignore if it is in the DEV SYSTEM OR talk to the system administrator.
Hope u got it,
Thanx & Regards,
RavIChandra
Edited by: Ravichandra.bi on Dec 8, 2011 4:04 AM
Edited by: Ravichandra.bi on Dec 8, 2011 8:24 AM

Message: carry out repairs..

BW Experts,
When we get this message, what does it mean.
'Carry out repairs in non-original system only if they are urgent
Message no. TR850'
does it mean the current system is a copy of a system. So this message can be ignored rite ?
Thanks,
BWer

Hi,
this message also occurs in sandbox systems which are copied from prodsystems. here you can ignore.
/manfred

Inter company Repair that was carried out zero Value

hai Experts,
the document is a Zero value inter company repair that was carried out at Zero value.
However, although no sales value has been recorded in FI/PCA, there has been an entry in PA under List Price value field
pls advise wat are the free requsitions for handling this and how to solve this issue
thanks in advance
Regards
Sreenath

Hi Sreenath,
I suppose you mean CO-PA. Use the transaction KE4ST to simulate the transfer. Enter the invoice number and press "value flow". You will see which conditions are transferred.
BR
Gabor

MacBook Pro Mid 2010 Model very sluggish when trying to carry out "demanding" tasks.

Hello,
I've had my MacBook Pro for almost three years now, I purchased it in August of 2010 and I have never had any problems with it until recently. First, the disk drive went out on me, it will read very low capacity disks such as photo disks or DVDs but when I try to pop in a game disk or burn anything, it makes this really loud noise and freezes up. I've already had this problem looked at, and I will be sending it to Apple to be repaired in the next month or so.
However, recently, a new problem has occured. Whenever I open an app, especially Safari, if I try to carry out "demanding" tasks (i.e. watch videos on YouTube, get on Facebook, listen to music from Pandora) it freezes and the only solution is to shut the computer down (by pressing and holding the power button, which I know is unhealthy for the computer) and turn it back on. Control+Option+Esc doesn't work anymore when this problem occurs and it doesn't just freeze the app in question, it freezes the entire computer. My GeekSquad and AppleCare over-the-phone-support options are both expired, as I haven't had any reason to renew them, since I haven't had any problems in the past two and a half years.
I have tried every solution that has been said on the web. I've cleaned all the chaches, I've reset the SMC, I tried to reset the PRAM but I didn't get the expected results, I've reset Safari, I've run virus scans, I've deleted unecessary items, I've done disk repairs, I've run all the great utility apps such as OnyX and Memory Clean, I have done everything that has been suggested with no results.
The only thing I can attribute this to is the recent addition of Virtual DJ Pro to my computer. My boyfriend and I use this computer for many purposes, such as making music, making videos, photo editing, writing, surfing the web, but mostly used for school. It used to be used for playing Sims 3, but since the disk drive has stopped working, I have removed the program from the computer completely.
I have read that Macs usually slow down after about 80% of their memory capcity is reached. I'm worried that this is the problem, but why would it only affect Safari? iMovie and iPhoto occasionally freeze, but they have had this problem since I've had the computer. This computer is running with a 2.4 Ghz Intel Core i5 processor with OS X 10.8.3 software and 4 GB 1067 Mhz DDR3 memory. I plan on buying an external hard drive soon and backing up using Time Machine, as I have never done this before and I fear that this problem may affect all of my documents.
I'm still covered by the in-store GeekSquad, but it's a twenty minute drive and the last time I took it in for the disk drive check-up, they basically said "Sorry, take it to Apple" and the nearest Apple store is three hours away in Kansas City, MO.
I put this question under "Internet and Networking" as the thing mostly affected by this problem is Safari. My internet connection is not the problem; it performs fine on the desktop, iPad, and iPhone 5. I am at my wits end here, and if anyone could offer a simple solution, I would be more than grateful. Thank you for your time in reading and taking time to respond to my question.

In the Replacement Program Support Article, it states:
Apple will service affected 15-inch MacBook Pro computers free of charge until three years from date of purchase. This worldwide Apple program does not extend the standard warranty coverage of the affected MacBook Pro.
http://support.apple.com/kb/TS4088
According to these terms, you are outside the eligibility window. However, I still second andyBall_uk's sentiments.
Make a Genius Bar Reservation. Print out a copy of the kernel panic report and the Support Article. If the 'Genius' refuses servicing without cost, ask for the store manager. It is ultimately at the manager's discretion.
Additionally, if this doesn't work out, you can look into Apple's flat fee repair program:
Do You Know About Apple's Flat Rate Repair Pricing?
Best of luck.

How do I restore and carry out maintenance on external drives

Under OS9 I used to regularly carry out optimising and maintenance on my mac and external hard drives. Now that I'm on OSX, I can't use Norton Utilities - that doesn't seem to work at all. Techtool Pro doesn't seem to fix external hard drives connected by firewire. Neither does Diskwarrior. How do I do maintenance for my mac and my drives. I have an external LaCie 160GB porsche firewire drive - that seems to have stopped working but I can't carry out any serious diagnostics as I have nothing that seems to work - DiskUtility doesn't carry out a full test and comes back with errors. I also have a Formac Oxygen 160GB external drive connected by Firwire which has also recently stopped working (when I mean stopped working, I mean that the mac no longer sees all the files I have stored on the drive and asks me if I want to initialise the drive - to which I obviously say no). I need to access the files on these external drives but can't get the mac to do this. Any help?

Hi Naz,
Norton Utilities does not work with OS X -- in fact it often makes problems worse. I fear NU has corrupted your external drives' directory structures.
* Remove Norton: How to manually uninstall Norton SystemWorks for Macintosh 2.x.
* Boot from your install CD/DVD and run Disk Utility. Repair Disk for the external drives. If DU can't repair, you can attempt DiskWarrior (it DOES work on external drives).
Good luck; let us know how it goes.
John

PAYMENT PROPOSAL COULD NOT BE CARRIED OUT

I did payment run program for one vendor F110 i have 3 invoice. within this invoice one invoice i did payment block at the time of payment proposal in F110 , the remaining two i cleared and i got all result after some days according to the next payment run date i am trying to do payment run F110, At the time schedule proposal the error system showing "PAYMENT PROPOSAL COULD NOT BE CARRIED OUT". Now i need clear that invoice wht i do through F110.....
Moderator: Please, use proper forum and don't post in CAPITAL letters

Hi,
Please go to Su01 enter your user ID click on default Tab and in output Device field please enter Output device and then re-run the proposal again.
Hope it helps.
Br,Vivek

"Multi-level error propagation carried out" in SCM 5.0

When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
Multi-level error propagation carried out
Message no. /SAPAPO/OM242
Could you please give me this help?
Thanks,
Lian

Hi,
Thank you for the information, but the problem is still there though I de-activated all user-exits...
I also saw the following error:
Invalid planning version
Message no. /SAPAPO/OM015
Thanks,
Lian

Multi-level error propagation carried out Error in APO

Dear Experts,
We had developed a custom program that is same as /sapapo/rrp3 report, but the issue is when we use planning version other then 000 the custom program is giving the error ""Multi-level error propagation carried out"" but the RRP3 report works fine with all the planning versions.
Please help to find the cause and to solve the issue.
Thanks.
Regards
Abhinav Nallani.

Dear Arek,
The problem is not yet resolved . we have raised an OSS note for the same.
as the relevant notes are already implemented in our case.
regards
Kiran

Error "Multi-level error propagation carried out" when I run a report

Hi All,
When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
Planning Version - Simulation Version XXX
Evaluation Start - 05/03/2011
Evaluation End - 12/31/2013
Evaluation List - Extended Operation List
I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
I have tried by ruuning Live cache consistancy check, but the issue is not fixed
Please help me to resolve this issue
Thanks & Regards,
Rajkumar

Hi Jack,
Please do post the server log file here so that we can try and find a solution for the problem you are facing.
I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
If it doesnt we can go through the server log and try to identify the cause of the problem.
Cheers :-)

CIF error-Multi-level error propagation carried out

Dear ALL,
When i am trying activate the integration model for Material transfer it generates queue with status SYSFAIL with message "Multi-level error propagation carried out".
and the integration model is not activated.
please help
regards
Kiran

Dear Arek,
The problem is not yet resolved . we have raised an OSS note for the same.
as the relevant notes are already implemented in our case.
regards
Kiran

Realignment showing multilevel error propagation carried out and

While executing realignment table it is showing following :-
Realignment showing multilevel error propagation carried out
Realignment of live cache time series aborted
Have seen all consistency checks and everything is fine no alerts received.
Please suggest
vikas

Hi Vikas,
I am assuming that you have maintained the Realignment table properly meaning you have only the necessary entries and removed all unwanted entries. Having assumed that the other reason why this error can come up is when you try to realign more than 1 Characteristic Value in the same table entry.
For Example.
Let us you have 3 Characterstics viz, product, location,customer.
If for Product P1, you are trying to change the location from L1 to L2 and customer from C1 to C2 then there is a possibility such an error might occure.
In such cases we need to create 2 entries as follows
1) P1 L1 C1 to P1 L2 C1
2) P1 L2 C1 to P1 L2 C2.
It is better to avoid Multiple characteristic changes in a single step.
Hope this helps.
Thanks
Mani

Scheduling not carried out in BAPI_PROJECT_MAINTAIN

Hi All,
I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
I am passing the following inputs:
I_PROJECT_DEFINITION = <Project Number>
I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
I_PROJECT_DEFINITION_UPD-START = 'X'
I_PROJECT_DEFINITION_UPD-FINISH = 'X'
I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
I_METHOD_PROJECT-REFNUMBER = '00000'.
I_METHOD_PROJECT-METHOD = 'SAVE'.
I_METHOD_PROJECT-REFNUMBER = '00001'.
I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
I_METHOD_PROJECT-METHOD = 'UPDATE'
I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
Please let me know the resolution to this problem.

Hi All,
I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
I am passing the following inputs:
I_PROJECT_DEFINITION = <Project Number>
I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
I_PROJECT_DEFINITION_UPD-START = 'X'
I_PROJECT_DEFINITION_UPD-FINISH = 'X'
I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
I_METHOD_PROJECT-REFNUMBER = '00000'.
I_METHOD_PROJECT-METHOD = 'SAVE'.
I_METHOD_PROJECT-REFNUMBER = '00001'.
I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
I_METHOD_PROJECT-METHOD = 'UPDATE'
I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
Please let me know the resolution to this problem.

Carry out repairs...

Similar Messages

Maybe you are looking for